Bad Issue playing Age of Empires III

Hi everyone,
I have a Pre february 08 MBP which I recently upgraded to Leopard. The computer fits all the minimum and recommended system requirements for Age of Empires III. The game runs fine with the graphics maxed out, Until, I started to play the maps that have bodies of water on them as well as the campaign game mode. At this point, the game and my computer freezes as little as 5 mins into playing. I cannot force quit and have to manually shut the computer down by holding down the power button for 5 secs. I don't understand what could be causing this. I have tried playing with the graphics to a minimum and it still happens. Also I have tried to play the multiplayer mode with gameranger but the client won't even load, it encounters a problem and has to be closed.
I thought that these were windows problems, It is extremely annoying that this is happening so soon into switching from windows to Apple.
Any help would be amazing!
Thanks in advance,
Charlie
Message was edited by: Westy123

Hello me again - i found this site: http://www.xlr8yourmac.com/archives/mar07/030807.html
with these steps...
<snip>
Hi Mike, I heard back from MacSoft about the Age of Empires III problem. They confirmed that it's a problem with the QT7.1.5 update on 10.3.9. They said that they're working on a fix, and gave me a workaround to get it going. I noticed later that they also posted it on their support site: http://www.destineerstudios.com/support/aoe3.html
" Problems with Quicktime 7.1.5 and OS X 10.3.9
A recent update to Quicktime from Apple has prevented Age of Empires III from starting up on systems running OS X 10.3.9. We are currently working on an update that addresses this issue, but the instructions below will allow you to play Age of Empires III on your Macintosh in the meantime.
1. Locate the Age of Empires III program on your computer. 2 . Control-click or Right Click on the Age of Empires III icon and select "Show Package Contents," then open up the "Contents" folder, then "Resources," "GameData," then finally the "avi" folder.
3. Go to the File Menu and select "New Folder."
4. Drag all of the files in the "avi" folder into the folder you created.
5. Close all of the windows and Start Age of Empires III.
Unfortunately, you will not be able to see the end of Act Movies in game until we have an update for Age of Empires III. However, it is possible to watch the movies if you navigate to the folder that you have created in the steps above. It will be necessary to drag the movies back into the "avi" folder after we have an update for the game that addresses this issue.
Thanks
-Brian
<snip>
hope this helps!

Similar Messages

  • Questionable graphics problem on Macbook Pro 13" in Age of Empires III, SOS

    Hey!
    I was playing Age of Empires III today. I set the settings so that I got between 30-40 fps in FRAPS. Everything was running smoothly accept one really annoying thing. Whenn I scroll over the map, the picture kinda lags, it stops and jumps. But the FPS is stable at 30-40. So I tried to lower the graphics. Got 70-80 fps, but still the same lag. What problem can this be

    I've played it for about an hour each stretch (more would make me feel guilty) graphics set at default high and I noticed a bit of heat but nothing out of the ordinary.
    I have installed the update. No issues.
    Let me know if you have other questions.
    (could you please mark that my post as helpful? I could use the points. Thanks!)

  • Age of Empires III not working in macbook pro 15

    i tried to play Age of Empires III 
    but it didn't work
    i don't know why
    i have
    Model Name:          MacBook Pro
      Processor Name:          Intel Core i7
      Processor Speed:          2.66 GHz
      L2 Cache (per core):          256 KB
      L3 Cache:          4 MB
      Memory:          4 GB
      Processor Interconnect Speed:          4.8 GT/s
    and my friend has mac book pro 13" and the deffrent was the processor speed
    it was 2.7
    and Age of Empires III worked in his mac
    anyone can help please

    hey
    i forgot to add  Graphics profile
    Intel HD Graphics:
      Chipset Model:          Intel HD Graphics
      Type:          GPU
      Bus:          Built-In
      VRAM (Total):          288 MB
      Vendor:          Intel (0x8086)
    NVIDIA GeForce GT 330M:
      Chipset Model:          NVIDIA GeForce GT 330M
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x16
      VRAM (Total):          512 MB
      Vendor:          NVIDIA (0x10de)
    i got video recorder from my iphone and i download it in youtube
    and this videos will show my problem
    http://www.youtube.com/watch?v=NSapGqV9PJc
    http://www.youtube.com/watch?v=SFNxawfVog4

  • Can I play Age of Empires, Command and Conquer & COD4 in Mac

    I want to buy a MacBook Pro 13" with its base configurations having Intel HD 3000 graphics. Will this support the games I mentioned like
    Age of Empires, Command and Conquer, COD4 & Fifa2011.

    well intel hd 3000 is just a very basic DISPLAY unit, it wouldnt be taken into consideration when purchasing computers becuz wat matters is the GRAPHIC PROCESSING UNIT, in this case, the new macbook pro come with awesome amd radeon hd series, which is pretty darn good. however, i would doubt that 13 inch would satisfy ur gaming needs becuz face it, 13 inch is kinda small to play epic games

  • I have an external hard drive with my new iMac.  I am trying to load Age of Empires III on the new computer.  I am supposed to drag the icon onto my hard drive icon.  Where is that?

    New iMac and not a computer whiz.  I have a new iMac with an external drive.  I am trying to load an old Mac game on it.  The Age of Empires icon tells me to drag it to the hard drive icon.  Where is that?  I have tried finder and launch pad.  No luck.

    Choose Computer from the Finder's Go menu and find the internal drive.
    (82444)

  • Equium M40X-149: DirectX (Direct 3D) issue playing Loaded Silent Hunter III

    Loaded Silent Hunter III in December 2005 after adding 512Mb RAM (total now 1Gb). Game has been running fine until now. Suddenly game fails to load with error message 'Cannot start 3D engine'. Have loaded latest Intel driver (dated Feb 06). Have loaded latest DirectX (v 9c) from MS site (dated Dec 05). Have uninstalled and reinstalled game from DVD. Still fails. DxDiag states 'Direct 3D functionality not available'....but it has been.
    Game suppliers have run out of ideas.
    You folks are my final hope...I'm going 'cold turkey' without being able to launch torpedos at ships!
    All help gratefully accepted.
    Peter

    Hi
    As far as I know this unit was delivered with a Mobile Intel 915GM Express Chipset AlvisoGM graphic card.
    Toshiba recommend to use the own graphic card drivers because they are especially designed for notebook usage.
    Please check this driver website:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
    There you should find a driver version 6.14.10.3943.
    But generally its not easy to say why you game wont run.

  • WRT160N can someone help me set up a configuration so I can play Age of Empires 2 online?

    Currently I am not able to sucessfully join or host games.
    I tried TCP/IP option, but no one can find me, I can't join other's games.
    I tried gamespy, no avail.  Unable to connect.
    I disabled my windows firewall and linksys's SPI firewall.  Any advice?  Thanks!

    Try Opening a Port number for your games i.e : 23978. To open the port on your router you need to login to your Router setup page click on Application and Gaming Tab and Click on Port Trigerring and Type in that Port Number in all 4 boxes and in Application Name type "AE" and click on save settings. This should solve your Problem.

  • Age of Empries III w/ expansions on Macbook

    Hi,
    I was curious if the game Ages of Empire III with its expansion packs would run well on the macbook, not the macbook pro IN boot camp
    Here's the requirements for the game on windows
    * Microsoft® Windows® XP
    * PC with 1.4 GHz equivalent or higher processor
    * 256 MB of system RAM
    * 2 GB available hard disk space
    * 32x speed or faster CD-ROM drive
    * 64 MB video card with support for hardware transformation and lighting required
    * Sound card, speakers or headphones required for audio
    * Microsoft Mouse or compatible pointing device
    * 56.6 Kbps or better modem for online play
    And here's the specs on the macbook
    * 2.0GHz or 2.2GHz Intel Core 2 Duo processor
    * 4MB shared L2 cache running at full processor speed
    * 800MHz frontside bus
    * 1GB (two 512MB SO-DIMMs) of 667MHz DDR2 SDRAM (PC2-5300); two SO-DIMM slots support up to 4GB
    I'm not certain if the macbook has 64 MB video card support or not, or if it will be enough for all of the graphics to work well. I also have 4gb of RAM installed,
    and should i be worried about the graphic cards? I'm illiterate when it comes to the correct drivers or not.
    Thanks for any feed back

    There ya go!
    Joe

  • Issues playing games

    Hi everyone,
    I don't really know whether this is the right thing to put in this forum, so sorry if its in the wrong place!
    I recently downloaded the demo for Age of Empires III. This played fine apart from when I started to play the maps with water in them and when I tried playing the campaign. The game crashes usually about 30 mins into playing a map with water in it, and it rendered the computer useless. I have to reboot every time by holding the power button down for four secs. I then bought the full game hoping that the problem would resolve itself. It hasn't. I have tried downloading the update, but it wont install, I get an error message.
    Is there anyway to stop this from happening, I bought this game after having seen the amazingly good graphics on the water, And I find it incredibly annoying that I cannot play the main aspect of the game (the campaign mode) without it crashing.
    Any help would be very greatly appreciated here.
    Many thanks,
    Westy

    Hi
    The graphic frame drops have been solved by BIOS update
    You should check the Qosmio X series forum There is a long thread about this theme.

  • Age of empire 3 cd rom

    can i play age of empire cd rom with my macbook pro?

    This forum is for troubleshooting compatbility issues between macs and Windows. You should probably repost your question in the OS X or PowerMac discussions

  • Why is my mac shutting down in middle of my age of empires 3 game. did not do this until 10.6.8 everything including the game is updated.

    when i play age of empires 3 my mac shuts down for no apparent reason. Any suggestions?  10.6.8 ; 2.8 ghz; i dont know how to find any other info. This did not start until i purchased and installed snow leopard. please help me!

    Do an SMC reset, which can fix problems with the system randomly shutting down:
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.

  • Why can't I start up Age of Empires lll

    Hi all
    Can anyone tell me why I can't run the new Age of Empires lll on my iMac? has this thing really that old and cannot support this game? My nine year old is anxious to start. Here is what it says when I try to launch the game:
    "Age of Empires lll requires a CPU running a 1150 MHz of faster."
    -or-
    "Your main video card must have at least 64MB of VRAM to play Age of Empires lll"

    Hello Bitti and welcome to discussions,
    I am sorry - Your computer is just not up to the job!
    System Requirements:
    G4/G5 or Intel processor running at 1.4GHz or faster
    Mac OS X v10.3.9 or higher
    512MB RAM
    64 MB Video Card (with support for hardware T & L). 56K dial-up Internet access or LAN for online play
    Regards
    Ian

  • I just bought a age of empires mac version for my macbook pro 15 inch and it wont start. What do I do?

    I just bought Age of Empires III for my new 15 inch Macbook pro but it wont start. What do I do?

    Insert it while you are in Windows, if it does not autostart run setup.exe.
    Choose your startup disk using Apple>System Preferences>Startup Disk (in OSX) or Control Panel>Boot Camp>Startup Disk (in Windows)

  • How to play multiplayer Age of Empires 2

    I just got Age of Empires 2 for my Mac the other day and now I want to play multiplayer with another mac and a PC. But I can't seem to figure out how.
    When I had a PC, I used to use LAN Connection but that's not even an option here on the mac version.
    My mac tried hosting, the other mac did and so did the PC. But whenever I tried to get into a game via IP address it says "unable to locate game" and when the other mac tries is just keeps loading forever and nothing happens on the PC. I'm pretty sure that the 2 macs are in a network but the PC is not, but they're all in the same house.
    So how do I play multiplayer games with two other people? I have no clue.....
    --Thanks.
    Message was edited by: Pop7

    Hi Pop7,
    although I had played AOE II and AOE III on my PC (when I had one), I never tried out multiplayer gaming.
    But one thing is certain: AOE II on Mac and AOE II on PC are not compatible in terms of multiplayer. They just don't cooperate.
    This goes for the whole Ago Of... series.
    Who is to blame for this, I don't know (maybe Microsoft or Ensemble Studios).
    Sorry
    Stefan

  • Age of Empires II on iMac G3

    I have a Lime iMac G3 with a 333 MHZ, 64 MB RAM, 6 GB Hard Drive, only 4 GBs is left, and Mac OS 9.2.2.
    I bought Age of Empires II for mac and the system requirements is 233 MHZ Processor, 2 MB VRAM graphics card, Mac OS 8.6 or higher, 32 MB RAM, 500 MBs of Hard Disk. So I thought buying this, I have double the RAM, almost double the required processor speed, and more than enough Hard Disk space. It runs, but I need to turn on virtual memory and RAM disk under the Memory options, and AOE II runs very slowly. Is there any way I can make it run faster without buying more RAM?

    You could try setting up a custom configuration using Extensions Manager
    where you'd be using the basic extensions and control panels for the system
    and graphics support, but shut off all other parts unnecessary for your app
    (the game) and the basic system.
    This could be very tricky; and you'd need to start by duplicating the full
    set (and then renaming the duplicate before changing it; so you could
    revert to the original extensions/control panels for other use) and it can
    be a real chore.
    Short of really upgrading an older machine, or getting one with the extra
    resources to run the system and at least one major application or game
    besides, even with the basic RAM and small HDD your early iMac has,
    it will be a struggle. OS8.6 requires less RAM to run, and the more work
    a system is expected to do, even behind the scenes, the slower it runs.
    OS 9.2.2 needs VM turned on to handle your game and the base system.
    Ideally, on just the RAM side, you'd fix the issue by adding 128+MB in a
    RAM chip. But the model iMac you have may be one of the harder ones
    to upgrade. A few were hard and others just more difficult.
    Another avenue of upgrade is in the hard disk drive; more free space and
    a faster spin rate effect available virtual memory and the speed at which
    the system can draw this VM from the space it uses on the HDD for VM.
    Essentially, the read/write speed of the hard drive and the fullness of it,
    and [a lack of] a significant data buffer in the drive, makes it slow or fast.
    An upgrade of these older models would include larger HDD + RAM.

Maybe you are looking for

  • Windows Patching - Error when logging in - "The Specified procedure could not be found"

    Hi, I am in the process of windows patahcing our estate with SCCM 2012 R2. All going well, except for 3 machines which have the error: "The Specified procedure could not be found" when the user logs in. I have tried to log in my self, created a new l

  • Stuck processes indicating hard disk problems?

    I have had trouble with "stuck processes" on my mini 10.5.3 server since it crashed after a Retrospect back up a month ago and found an interesting piece of data this am: Using a recycled usb connected hard drive connected to the mini server, Retrosp

  • F.13 automatic clearing for vendor

    Hi experts, My business process step is : 1. Create vendor invoice 2. Create payment request 3. Run payment run After the payment run, the clearing account for payment request and payment run is automatically cleared. But the vendor invoice and payme

  • Problem with find reference and overshooting limits

    I have a two axis system set up (with a 7344 and UMI-7764), axis 2 uses a lead screw and the find center VI works properly, axis 1 however has a much longer travel and uses sprockets and cables to move and is therefore less rigid.  When attempting to

  • Can't allocate any users to use iCal Server

    Have successfully set up 10.6.1 server. DNS and Open Directory both OK. iCal service is running on default port 8008 and is using the default server dns name. The problem we're having is that in Workgroup Manager we cannot allocate a user to use iCal