Bad problem help me fix it
Hello i want to install movie maker for windows 8.1
but whe i start install it comes with windows esintals 2012 install
well the download gets tsuck at 20%
wrong forum. this is server essentials, not windows essentials
But delete your temp inet files and try again :)
Grey
Similar Messages
-
*OMG* huge restore problem - help me fix this Christmas nightmare!
I recently made a backup of my little sister's macbook on my time capsule. She had to get a new hard drive (the old one was returned).
After the new hard drive was installed, we tried to restore her system. After almost a full day, it was not finished yet (perhaps around 80%). Then, the power adapter got disconnected from the laptop so the macbook went to sleep for a couple of hours.
When I realized the power was not connected, I plugged it in again, woke up the macbook, and hoped that the Time Capsule Restore would resume. However, it failed.
I tried to restart the restore process but this time, it would not see any Time Capsule backups! Can anyone please help me?I think you will have to boot from the DVD that came with the MacBook (hold down the C key when it starts to boot from the DVD) and start the Time Machine restore over again. If you can connect the Mac to the Time Capsule using ethernet instead of wirelessly, it will go a lot faster.
-
I can't open my gallery after i migrate the iphoto! How can i fix this bad problem?
HI,
I can't open my gallery after i migrate the iphoto! How can i fix this bad problem? Flz help me!!Try repair permissions with Disk Utility
Regards
TD -
hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed
-
Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanksThose are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1
I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated. -
I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097 -
Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens
Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini -
Can you please help me fix a crackling/distortion problem that i have with AA when recording?
I've read before on the forum that some other users have the same problem and I've tried quite about everything to fix my problem as well, but still no result.
When I record, be it in AA 1 or in AA 3, i sometimes end up with channels being distorted (randomly!).
Here's my config:
I think it's important to say that I've been having this problem starting only a few months ago, though I haven't reinstalled Windows or anything. I'm working with windows XP SP3. I think (though i'm not sure) the problem occured about the same time I've updated my M-Audio drivers to version 5074. I've also tried disabling C1E as I've read on this forum on another topic and no result.
Also,
here's a sample of the crackling:
http://dl.transfer.ro/transfer_ro-26jun-168e94ae4dc5d9.zip
I'll send a bottle of Jack to whoever helps me fix this one Really now, I'm desperate!I don't hear crackling in that sample, myself, just a split-second rant in another language I can't identify, but anyhoo...
1. Have you tried rolling back to the 5069 driver?
http://www.m-audio.com/index.php?do=support.drivers&f=930
2. Check out this thread:
http://forums.m-audio.com/showthread.php?17641-**Official-Info-Delta-Series-Driver**-Updat ed-5-26&s=e3e523dd417e4335c48234bac735fa59
I see you're having your issue in WinXP SP3. One guy (see post 43 on page 5) reports it in Win 7 with this driver. People have reported better success with the 5069 driver but that one has been reported to lock on shutdown in Win7.
3. Check out this thread:
http://forum.cakewalk.com/tm.aspx?high=&m=1998799&mpage=1#1998799
Same driver, Win7, different M-Audio card, different sound program, but crackling/sizzling. Fix reported by OP in post 14 by adjusting BIOS settings:
Disabling EIST (Enhanced Intel Speedstep Technology) and CPU C state in the power section of the BIOS made all the crackle sizzle go away!
There's a checkmark in the last window in your screenshots for that one. Also discussion of suggestions to adjust latency, etc., in soundcard which didn't fix it for him but may have for others.
If those give no joy, please post motherboard brand and model.
Message was edited by: Mel Davis. Addition to suggestion #3. -
I have a big problem regarding my iphone4 it wont start up and it keeps vibrating, please help me fix it. its been vibrating since 2 pm until now 7pm here in Philippines
What program did you use to fix the internal hard drive? What repairs did it report making? More crucially, if repairs were reported, did you re-run the utility until it reported no problems found? It's possible for one set of problems with a drive to mask others.
If you have about 5GB or so free space on the internal hard drive, you can use your OS X Install disc to perform an Archive and Install to recover from the failed Software Update. When the computer restarts, download and run the OS X Update Combo 10.4.11 (Universal). When the Mac restarts after that, run Software Update. During all this, make sure nothing interrupts or shuts down the Mac! Note that the first start after each of these updates will take significantly longer than subsequent starts, so be very patient.
How did you back up your internal drive to the external one? Did you just drag things over in the Finder, or did you use a utility such as SuperDuper! or CarbonCopyCloner? Does the external HD show up as a bootable volume in System Preferences > Startup Disk, or using Startup Manager? -
Very Bad Problem.. please help..
I seem to have a quite a predicament on my hands.. I just bought this Ipod a few days ago and it worked great for the first few days. Yesterday however, I was listening to some music and then it suddenly froze. I held Menu and the middle button to reset it and it did. Then when it resetted itself to turn back on, a little folder with an exclamation point appeared. I looked on apple.com to figure out what this meant and nothing there helped me. When i connect my ipod to the computer it just keeps resetting itself over and over again. When i try to Update it using the Ipod Updater that i download from apple.com, it said no Ipod found when my Ipod is connected to the computer..
Can Someone plz help me fix my ipod..Don't connect the iPod until the Updater prompts you to do so (I.e. run the updater first, then connect the iPod only when prompted by the updater).
-
Self Assigned IP / DHCP problem : sharing my fix.
Okay. I WAS frustrated for a long two weeks before I figure this out. It seems that this problem has affected a LOT of people out there, and since I now am (supposedly) free of this thing, I want to share my hypothesis of the problem's roots (A) and my fix (B).
Note that:
- i'm free of this problem since the last one week, so .. well, hopefully this is right.
- the problem happens almost anywhere, with any router types, and in any connection type, be it ethernet or wireless a/b/g/n.
- the problem is automagically fixed by running into safe mode.
- the problem keeps happening again and again, although you have powercycled everything of the electronic peripherals in your house, even by disconnecting your phone/ADSL line and main power fuse.
- disabling the Mac OS X Application Firewall sometimes cures it, but most of the time it happens again.
- AFAIK (correct me if i'm wrong), the ipfw, mother of all OS firewall, exists within Mac OS X, and the Mac OS X Application Firewall (i call this OSXAF) has nothing to do with ipfw.
A. My hypothesis and the reasons.
* for an unknown reason, there is a rule created for ipfw that tells it to block the ports 67 and 68, both are the common DHCP ports.
* because of that, your Mac cannot contact with any DHCP servers, anywhere. This forces your mac to assign an IP address by itself.
* disabling OSXAF incidentally removes that rule, but after (one or a few times) reconnect or reboot, the rule appears again.
* powercycling your routers or anything related does not concern ipfw, thus has no effect whatsoever to the problem.
B. My fix.
1. Get the WaterRoof free ipfw frontend (forgot the site, just google)
2. Open it.
3. Go to Static Rules part.
4. Find everything which reads "deny blah blah blah port blah,blah,67,68,blah blah"
5. Edit those rules so that there is no 67 and 68 inside.
6. Open tools -> rules configuration -> save to startup configuration -> yes.
7. Open tools -> startup script -> install startup script -> yes.
That's all.
For me, this seems to be a permanent fix. Please note that the startup script mentioned before exists in all *nix-based machines, so don't worry about startup time, there'll be no slowdowns (again, please correct me if i'm wrong, i had only little experience with *nixes). Besides, i suspect that if you don't save and reinstall that script, the previous script is the one which has 67 and 68 inside.
Hopefully this helps. Any corrections, comments, suggestions, and/or knowledge are welcome.
Cheers,
-bam, the noob.OK, so a little background -
I have an MBP with 10.5.5 (which I downloaded yesterday, so that's not the issue). This year at school they upgraded the wireless system and network control to Foundry routers and Bradford Securities Network Control. Problem is, my computer is intermittently and randomly having a hard time sticking with one IP and staying away from a self-assigned 169 IP. The System Prefs are fine, and even when I change to manual settings for the IP, it doesn't stick. I checked the terminal (tcpdump) and it seemed to be having a tough time accepting one of the two IPs the servers offered (there are two servers for redundancy). It asked for an IP, gets two offers, and then asks again. I was stumped, and so were the IT guys on campus. And it's not just me, many other 10.5 users are having the issue. And it's not the network, because nobody else is having the issue but 10.5 users. Certificate problems are similarly eliminated from possibility.
The IT guy showed my this thread, and I was excited, so I first tried to just shut off the Firewall all together, and that worked, briefly, but now it doesn't matter if the Firewall is on or off, the problem persists. I tried your WaterRoof method, and the similar program NoobProof, but there were no rules relating to ports 67 or 68 at all, let alone denying them. (As a side note, when my FW is off, there's only the rule allowing all IPs in and out, and when it's on (but only allowing specific programs) it gives a second rule that denies "icmp from any to me in imcptypes 8." No idea what that means.) I've been watching tcpdump and the FW logs closely (as well as the console itself), but nothing has changed. The only interesting thing is that when the IP changes from the (good) 137 IP I'm supposed to have to the (bad) 169 IP, often times (in fact, most times) there is no firewall activity. The console says that the en1 link (wireless) is now down, and the tcpdump picks up the computer asking for an IP again, but the firewall logs pick up nothing, neither through the console or through WaterRoof. Which is weird, because I thought it was a FW problem (as did the IT guys), but the logs show that only occasionally when the servers offer me an IP does the FW block the request, but not all the time.
As another point to note, this is not only an issue with the wireless. The wired connection (Ethernet right into the wall, and attempted from many different plug-in sites) also has this issue.
My only conclusion is that the FW is buggy, or that the logs are missing denials, neither of which makes much sense, IMHO.
Any thoughts?
EDIT: Shutting off the FW often solves the problem, but not always. Sometimes I can get a correct IP even with the FW in full swing without anything popping up in the logs. And sometimes I can't.
Message was edited by: kangasaurus -
Powerbook G4 Screen Distortion...please help me fix
Hey all. This is my first post on this forum, because I haven't owned a Mac since 2009. But I come to this board often to troubleshoot when I am helping my friends/family with their Macs (yeah, i'm the 'computer guy'). Anyway, I now have a Mac that was given to me by a family member that has a very specific problem that I hope someone will be able to help me fix.
It's a 2004 Powerbook G4 (A1046). It turns on, and I hear the chime, but the whole screen is distorted. It's weird because the screen flickers to a normal light blue screen for a second when it changes from the boot screen (with the spinning wheel) to the login screen, but then it remains distorted and I can barely make out anything on the screen. The computer works otherwise.
Here's a link to my Youtube video showing exactly what is happening. http://youtu.be/Ce7bTYFKrdE (around 0:56 is where you can really see the distortion most clearly).
I tried to see if it was a problem with the OS, but since I don't have an OS X install disc, I tried running a live CD of Linux (PowerPC version). I was able to run the live CD, but the distortion remained throughout. I also tried connecting it to my external monitor, but the same distortion appeared across both monitors.
Any possible causes for this you guys can think of, or possible solutions, would be appreciated. Thanks in advance.Those are rather classic symptoms of video hardware failure. However, quite a few G4 PowerBooks and G5 iMacs whose serials numbers began with W8 experienced actual display screen failures.
Both are bad because so many used parts now offered as repair parts were scavenged from defective computers.
A test to sort whether the video hardware (not worth fixing) or the display unit (maybe worth fixing if you can get parts) is at play, connect an external monitor. If the video defects reappear on the external monitor, the video hardware is shot and it is time to bid the computer a fond farewell. The video hardware is part of the logic board and replacement boards are scare can can cost as much as a used working Powerbook.
If the problem does not appear on the external, the video hardware is fine but the display unit is bad. You will still be looking for a hard-to-find part. However, one could continue using the computer as a desktop model with the external monitor,
PowerBooks are not easy to service at home. How clever are you with computers and small fiddly bits? -
Help me it keeps saying there is a billing problem with this purchase tap continue and sign in to view billing information!
And then it goes to sign in so I sign and then it takes me to my card well I don't use it any more so how do I get rid of it it does the same thingfor all the free things fix it pleaseWelcome to the user to User Technical Support Forum provided by Apple.
hendersonwoman wrote:
Help me it keeps saying there is a billing problem ... fix it please
For your issue... Contact iTunes Support...
Use this Link > Apple Support iTunes Store Contact -
Hi, Firefox on my desktop keeps crashing at just random moments. Sometimes not very often at all, but other times it can happen a few times within an hour.
My Desktop Window Manager also crashes regularly and the dialogue box always pops up saying its stopped working. However, this doesn't seem to effect anything.
It could be realated though, as I just had this desktop built a few weeks ago and a few times it's crashed as well as programs.
If anyone can help me fix this issue with Firefox, that would be great. Thanks in advance.Hi,
I updated the Flash plugin, but I still keep getting crashes.
I will try to disable the hardware acceleration in the Flash Player as you recommended and hopefully this will work.
Although the last crash report I got has a different problem then before,
https://crash-stats.mozilla.com/report/index/6c5d8c66-6789-4b52-94e4-61cdf2110530
Signature: BuildArgArray
If you can please offer any more advice that would be great, thanks.
Maybe you are looking for
-
How to download the file in as3.0
hi in as3.0 click the button and download the file in the local path folder. how to write the code in as3.0. help me thks
-
Mass upload of Transportation Lane
Hi , Can anyone tell what is the easy method of uploading transportation lane. I tried using LSMW but i can't using the recording method. If anyone have a standard template and BDC program. Please let me know. Thanks in advance Regards Shan
-
How to get rid of white space above footer in Muse
I have a website that has several random pages where different sizes of white space will appear above the footer even though I did not put them there. How can I get rid of this empty white space? This is the page in Preview Mode: This is the page is
-
Hi Expert, I want to archive (compress) km documents which contains pdf, xml forms. Is there any way of make them zip ? and I want to show them in a seperate iview. any help? Desh.
-
Is it possible to install Quicktime X (10.x) in Leopard 10.5?
Hi All I have had a look around and cannot seem to find an answer to my question. Is it possible to install Quicktime X (10.x) in Leopard 10.5? Many thanks Garry