?? Bad registry creation after install Oracle 8.1.7 / Developer 6i

Hello,
I posted a previous message here regarding a problem starting the Oracle services in my laptop, after installing Developer 6i.
Well I now know what happened: When I installed Oracle Enterprise, I specified ORAOi as the ORACLE HOME (in C:\oracle8i). Later while installing Developer I specified ORANT (C:\orant) as it's own ORACLE HOME.
Now in the REGISTRY this should have created TWO oracle homes, but as it turns out the installation of Developper just REPLACED the previous home. So now I seem to have ONLY ONE HOME (all the other keys in the registry, for the DB, were lost).
Now, how can I do to get a copy of the "previous" registry keys, before the install of Dev 6i?
I'm installing in Windows XP.
I would really appreciate ANY help.
--oswaldo.

The normal procedure when installing a single database and a single version of developer on the same PC is to install developer first then the DB afterwards, AS LONG AS the DB is multiple-home aware. In this example, we are using 8i / 8.1.5 as this is MOH aware. This is documented by Oracle. This is the standard method - install developer first then 8i.
PROBLEM! If using a pre 8i database, you have to install it into the same Oracle home as developer - and only then there are only VERY SPECIFIC COMBINATIONS of the two products that will work. You HAVE to make sure this is correct. The problem with this approach is that you cannot upgrade the one without upgrading the other. As such Section A of this note is based on the assumption that you are using 8i or another MOH aware database.
Workarounds for Pre 8i database and developer installations on the same machine can be discused later.

Similar Messages

After installing oracle 10g on linux im getting this error

Hi,
Can any one give me any solution on i getting an error after installing oracle 10g on linux.
ERROR:-
/oraeng/app/oracle/product/10.2.0/bin/clscfg: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to initialize Oracle Cluster Registry for cluster

Hi, please ensure that both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle.
That is the critical step.
After re-execute the root.sh file
Has been known to reset the permissions from the previous step - bug in some patch releases.
Suggest OP records permissions for those two files before running root.sh Or run root.sh before setting the permissions.

Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

eth0      Link encap:Ethernet HWaddr 00:15:17:F7:81:53
          inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
          Memory:dfcc0000-dfce0000
eth1      Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
          inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
          Interrupt:169 Memory:dfbf0000-dfc00000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/A

This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf

My computer slows down and hangs after installing oracle 10g

My computer just slows down after installing oracle 10g. I have a pentium 4 3ghz with 512 memory (32 mb used by graphics built in card). It slows down and hanged even if I agjusted the swap memory to 800 mb. I have two swap file/page file - in drive c and drive d. I even cannot shut it down because it takes maybe 30 minutes just to see the "shut-off/log-off" screen.

Before starting up Oracle, when you go to the task manager, how much RAM does it show actually free? 512 MB is pretty small to run Oracle in the first place-- Windows and Office can use a fair chunk of RAM themselves, depending on which Office apps you are running. You may also be suprised by the amount of RAM that a web browser, email client, and the various other apps that folks generally install can use.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

No Listener service after installing Oracle 10g 2

Hi,
I have finished installing Oracle 10g 2 on a windows 2003 server. But no Listener windows service is not created. Any explanation ? Should I create the manually , How ?
Many thanks.

No, but I created one after installing Oracle , by
DBCA.
I'm going to apply RDBMS 5337014 patch to upgrade to
10.2.0.3. Should I create Listener before ?
Thank you.
Message was edited by:
user522961For applying patch actually you don't need listener, but it is best if you have a listener for client to connect, isn't it?
cheers
FZ

Oracle 10gr2 locally is not working after installing Oracle 11g

hi ,
Does anyone has any idea after installing oracle 11g in system, Oracle 10g locally is not working. I am getting below error.
Forms session <2> failed during startup: no response from runtime process

Generally this is because the software you install last updates the system environment variables with its information, thereby break products that use files with similar names. Specifically, look at PATH and ORACLE_HOME. Likely you will see that entries for your 11g installation will be displayed first. In order to use v10, you would need to change this or use script files to start executibles. For Forms runtime, be sure to properly set default.env to point to the desired PATH

Tomcat seems couldn't run after installing Oracle 8.0.6

After installing Oracle 8.0.6, my Tomcat seems couldn't startup. I have set the environment variable for JDBC and Oracle driver like: Classpath = .;c:\orant\jdbc\lib\classes111.zip and path = c:\jdk1.3\bin;c:\orant\jdbc\lib\classes111.zip. However, before installing Oracle, Tomcat was running smoothly. Is installing Oracle make mess between Tomcat and Oracle? Or, is the environment variables are set incorrectly? Please help me to solve the problem. and how to make database connection to Oracle using JSP(Tomcat). Your advice is much appreciated, thanks in advance.

Add a reference to the oracle driver zip file (classes12.zip) to the classpath in the batch file that runs tomcat (i.e. tomcat.bat).
Then, the architectural decision is all yours. You can define a database access layer...
I'd look in to the model 2 architecture if you want to learn how to do this. There are loads of references, none of which I have to hand, but try searching the JDC, there's bound to be plenty.
On the other hand, if you want a quick and dirty solution, then model 1 is the way to go.
Cheers,
KJ

500 internal server error after installing oracle EBS 12.1.1

After installing oracle 12,1.1 using rapidwiz . the login page didn't open because of error 500 internal server,
i run autoconfig for database and i face that error below. how can i unlock that account and how can i connect sqlplus to oracle ebs.
thanks.
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@apps.appsdomain:1521:VIS
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked

Please see:
R12: Clone fails with error "ORA-28000 The account is locked" (Doc ID 1114244.1)
APPS User Account Is Locked While Applying a Patch. Patch Fails With "ORA-28000" (Doc ID 420001.1)
Thanks,
Hussein

Using sqlplus command after installing oracle 9i on RHEL 3

Hi experts,
I have installed oracle database on Redhat enterprise linux 3.
Install location is /home/oracle/ora9i.
Version Oracle 9i (9204)
after installation when I typed follwing commands ..it did not work
$ sqlplus /nolog
Please help me with this.
Thanx in advance ...
Deepak

duplicate post of following thread
Using sqlplus command after installing oracle 9i on RHEL 3

Not able to register with listener after installing oracle grid infrastrtcure in oracle 11gr2 on windows

Hi Guru's.
I am not able to get listener connectivity after installing Oracle 11gr2 Grid infrastructure on windows on vmware workstation. I register with static ip.
Even i recreated the listener and running the listener from Grid home.
The output what i am getting is :--
C:\> lsnrctl status
The listener support no services
Can you please help me out

C:\Users\Administrator>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:10
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully
C:\Users\Administrator>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                26-NOV-2013 09:09:24
Uptime                    0 days 0 hr. 0 min. 4 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Users\Administrator>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:09:31
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                26-NOV-2013 09:09:24
Uptime                    0 days 0 hr. 0 min. 8 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Log File         c:\app\administrator\diag\tnslsnr\WIN-0P8BCA3R7V5\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Users\Administrator>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 26-NOV-2013 09:13:10
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "+asm" has 1 instance(s).
Instance "+asm", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: WIN-0P8BCA3R7V5, pid: 2560>
         (ADDRESS=(PROTOCOL=tcp)(HOST=WIN-0P8BCA3R7V5)(PORT=49246))
The command completed successfully

Problem starting ASM instance after installing Oracle Grid standalone

Hi!
After installing Oracle Grid 11gr2 and rebooting my machine:
Linux localhost.localdomain 2.6.32-300.10.1.el5uek #1 SMP Wed Feb 22 17:37:40 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
I run asmca command and it failed to startup ASM instance, I tried to paste the log but it's too long!
Could someone help me please! thank you very much!
José
I paste just the last piece:
+[main] [ 2012-03-15 15:01:56.853 CET ] [SQLEngine.initialize:354] m_bReaderStarted: false+
+[main] [ 2012-03-15 15:01:56.857 CET ] [SQLEngine.initialize:358] Starting Reader Thread...+
+[main] [ 2012-03-15 15:01:56.919 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine+
+[main] [ 2012-03-15 15:01:56.919 CET ] [OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: null+
+[main] [ 2012-03-15 15:01:56.927 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS+
+[main] [ 2012-03-15 15:01:56.927 CET ] [OracleHome.getVersion:896] Homeinfo /u01/app/grid/product/11.2.0/grid,1+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.loadLibrary:308]+
Inside constructor of OCR
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.isCluster:939] Calling OCRNative for isCluster()+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:943] OCR Result status = true+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:955] Bolean result = false+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.931 CET ] [MessageBundle.getMessageFields:338] MessageBundle.getMessage() failed to load the string PRKC-PRKC-1036 : CRS_HOME name passed to the method was null Exception: java.util.MissingResourceException: Can't find resource for bundle oracle.ops.mgmt.resources.PrkcMsg, key PRKC-1036 : CRS_HOME name passed to the method was null+
+[main] [ 2012-03-15 15:01:56.931 CET ] [ClusterUtils.getCRSActiveVersion:1797] Error getting CRS active version: PRKC-PRKC-1036 : CRS_HOME name passed to the method was null : <null>+
+[main] [ 2012-03-15 15:01:56.931 CET ] [OracleHome.getVersion:903] OracleHome.CRSActiveVersion: null+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:943] Current Version From Inventory: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:948] using sqlplus: /u01/app/grid/product/11.2.0/grid/bin/sqlplus+
+[main] [ 2012-03-15 15:01:57.084 CET ] [UsmcaLogger.logInfo:141] Role SYSASM+
+[main] [ 2012-03-15 15:01:57.085 CET ] [UsmcaLogger.logInfo:141] OS Auth true+
+[main] [ 2012-03-15 15:01:57.182 CET ] [SQLEngine.done:2148] Done called+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:171] SEVERE:method oracle.sysman.assistants.usmca.backend.USMInstance:checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:172] ORA-01034: ORACLE not available+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available+
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:823)
oracle.sysman.assistants.usmca.backend.USMInstance.checkAndStartupInstance(USMInstance.java:573)
oracle.sysman.assistants.usmca.backend.USMInstance.discoverASMInstance(USMInstance.java:340)
oracle.sysman.assistants.usmca.service.UsmcaService.discoverASMInstance(UsmcaService.java:146)
oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:230)
oracle.sysman.assistants.usmca.Usmca.main(Usmca.java:333)
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logInfo:141] ASM failed to start. Check /u01/app/grid/cfgtoollogs/asmca/asmca-1203153PM0138.log for details.+

Hi,
i've got similar problem but my asm is not just down. After installing grid home with infrastructure I've restarted os and there is no crs services and the only result from this command:
# ps -ef | grep grid
grid      2075     1 0 13:58 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
root      2463 2439 0 14:06 pts/0    00:00:00 grep gridgive me opposite to this one before restart:
$ ps -ef | grep grid
grid      2076     1 0 13:01 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid      3646     1 0 13:44 ?        00:00:04 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid      3806     1 0 13:45 ?        00:00:02 /u01/app/grid/product/11.2.0/grid/bin/oraagent.bin
grid      3820     1 0 13:45 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmd.bin
grid      3853 3820 0 13:45 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmlogger.bin -o /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.info -l /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.log
root      3879 2307 0 13:46 pts/0    00:00:00 su - grid
grid      3881 3879 0 13:46 pts/0    00:00:00 -bash
grid      4172     1 0 13:48 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/cssdagent
grid      4197     1 0 13:48 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ocssd.bin
grid      4550     1 0 13:49 ?        00:00:00 asm_pmon_+ASM
grid      4552     1 0 13:49 ?        00:00:00 asm_psp0_+ASM
grid      4554     1 0 13:49 ?        00:00:02 asm_vktm_+ASM
grid      4558     1 0 13:49 ?        00:00:00 asm_gen0_+ASM
grid      4560     1 0 13:49 ?        00:00:00 asm_diag_+ASM
grid      4562     1 0 13:49 ?        00:00:00 asm_dia0_+ASM
grid      4564     1 0 13:49 ?        00:00:00 asm_mman_+ASM
grid      4566     1 0 13:49 ?        00:00:00 asm_dbw0_+ASM
grid      4568     1 0 13:49 ?        00:00:00 asm_lgwr_+ASM
grid      4570     1 0 13:49 ?        00:00:00 asm_ckpt_+ASM
grid      4572     1 0 13:49 ?        00:00:00 asm_smon_+ASM
grid      4574     1 0 13:49 ?        00:00:00 asm_rbal_+ASM
grid      4576     1 0 13:49 ?        00:00:00 asm_gmon_+ASM
grid      4578     1 0 13:49 ?        00:00:00 asm_mmon_+ASM
grid      4580     1 0 13:49 ?        00:00:00 asm_mmnl_+ASM
grid      4582     1 0 13:49 ?        00:00:00 oracle+ASM (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
grid      6128     1 0 13:52 ?        00:00:00 /u01/app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
grid      6142 3881 0 13:53 pts/0    00:00:00 ps -ef
grid      6143 3881 0 13:53 pts/0    00:00:00 grep grid
$ srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): pc
$ srvctl status asm
ASM is running on pcI'm using 2x 1TB hdisk as 2 pv in one vg. I thought that lvolume permissions are incorrect but now I had:
# ls -l /dev | grep dm
crw-rw---- 1 root root      10, 61 May 16 13:57 cpu_dma_latency
brw-rw---- 1 root disk     253,   0 May 16 13:57 dm-0
brw-rw---- 1 root disk     253,   1 May 16 13:57 dm-1
brw-rw---- 1 grid asmadmin 253, 10 May 16 13:57 dm-10
brw-rw---- 1 grid asmadmin 253, 11 May 16 13:57 dm-11
brw-rw---- 1 grid asmadmin 253, 12 May 16 13:57 dm-12
brw-rw---- 1 grid asmadmin 253, 13 May 16 13:57 dm-13
brw-rw---- 1 grid asmadmin 253,   2 May 16 13:57 dm-2
brw-rw---- 1 grid asmadmin 253,   3 May 16 13:57 dm-3
brw-rw---- 1 grid asmadmin 253,   4 May 16 13:57 dm-4
brw-rw---- 1 grid asmadmin 253,   5 May 16 13:57 dm-5
brw-rw---- 1 grid asmadmin 253,   6 May 16 13:57 dm-6
brw-rw---- 1 grid asmadmin 253,   7 May 16 13:57 dm-7
brw-rw---- 1 grid asmadmin 253,   8 May 16 13:57 dm-8
brw-rw---- 1 grid asmadmin 253,   9 May 16 13:57 dm-9and:
# ls -l /dev/vg_main/
total 0
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol1 -> ../dm-2
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol10 -> ../dm-11
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol11 -> ../dm-12
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol12 -> ../dm-13
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol2 -> ../dm-3
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol3 -> ../dm-4
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol4 -> ../dm-5
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol5 -> ../dm-6
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol6 -> ../dm-7
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol7 -> ../dm-8
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol8 -> ../dm-9
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol9 -> ../dm-10
lrwxrwxrwx 1 root root 7 May 16 13:57 lv01_swap -> ../dm-1
lrwxrwxrwx 1 root root 7 May 16 13:57 lv02_root -> ../dm-0I've used search path for ams disks as /dev/dm* and /dev/vg_main/asm* and seen all of them in both configurations.
I've tried to reconfigure HAS through (as root):
$GRID_HOME/crs/install/roothas.pl -deconfig -force -verbose
$GRID_HOME/root.shthis gave me working asm instance but after restart I'm in base position with no crs services.
And... I've tried to startup crs after restart with no luck but before restart I can shutdown everything and startup ASM instance too (so everything is fine till the reboot). I'm on CentOS 6:
$ uname -a
Linux pc 2.6.32-220.13.1.el6.x86_64 #1 SMP Tue Apr 17 23:56:34 BST 2012 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/issue
CentOS release 6.2 (Final)
Kernel \r on an \mAny hints about how to resolve this problem would be most welcome.
Regards.

IE failed after installing oracle forms

Hello ,
I have installed Oracle Forms10g,& DB then .After connecting to DB when I tried to run TEST.FMB(example form given by oracle), My IE(IE8,Windows7) dont show the form runtime,rather it shows a blank page with a url: http://<My_PC Namexxx-pc>:8889/forms/frmservlet. I came to know that I need to change formsweb.cfg,default.env and registry.dat,I have installed the my jinitiator also. Please help me out how can i run my form locally. I am giving the codes also of those files,if i need to change anything please let me know
default.env*
# $Id: default.env 14-apr-2005.13:22:43 pkuhn Exp $
# default.env - default Forms environment file, Windows version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value in the Windows registry
# will be used. If no value is found in the registry, the value used will
# be that defined in the environment in which the servlet engine (OC4J
# or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=E:\ORACLE_INSTALLED\DevSuiteHome_1
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be semi-colon
# separated (e.g. c:\test\dir1;c:\test\dir2)
FORMS_PATH=E:\ORACLE_INSTALLED\DevSuiteHome_1\forms
# webutil config file path
WEBUTIL_CONFIG=E:\ORACLE_INSTALLED\DevSuiteHome_1\forms\server\webutil.cfg
# Disable/remove this variable if end-users need access to the query-where
# functionality which potentially allows them to enter arbitrary SQL
# statements when in enter-query mode.
FORMS_REJECT_GO_DISABLED_ITEM=FALSE
FORMS_RESTRICT_ENTER_QUERY=TRUE
# The PATH setting is required in order to pick up the JVM (jvm.dll).
# The Forms runtime executable and dll's are assumed to be in
# E:\ORACLE_INSTALLED\DevSuiteHome_1\bin if they are not in the PATH.
# In addition, if you are running Graphics applications, you will need
# to append the following to the path (where <Graphics Oracle Home> should
# be replaced with the actual location of your Graphics 6i oracle_home):
# ;<Graphics Oracle Home>\bin;<Graphics Oracle Home>\jdk\bin
PATH=E:\ORACLE_INSTALLED\DevSuiteHome_1\bin;E:\ORACLE_INSTALLED\DevSuiteHome_1\jdk\jre\bin\client
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications. In addition, you will need to
# modify the PATH variable above as described above.
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
#GRAPHICS60_PATH=
# Settings for Forms tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>\forms\server
# System settings
# You should not normally need to modify these settings
FORMS=E:\ORACLE_INSTALLED\DevSuiteHome_1\forms
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# frmsrv.jar, repository.jar and ldapjclnt10.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=E:\ORACLE_INSTALLED\DevSuiteHome_1\j2ee\OC4J_BI_Forms\applications\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\repository.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\ldapjclnt10.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\debugger.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\ewt3.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\share.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\utj.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\zrclient.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\reports\jlib\rwrun.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\forms\java\frmwebutil.jar
formsweb.cfg_
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=E:\ORACLE_INSTALLED\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

I tried to run TEST.FMB(example form given by oracle), My IE(IE8,Windows7) dont show the, I have installed the my jinitiator also.Internet explorer (IE 8) doesn't support jinitiator. You have to upgrade JRE.
Check this link. http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA
Hope this will help you
If someone's response is helpful or correct, please mark it accordingly.

Repeated ORA-12547 Messages after installing Oracle 10g

Hi,
I installed Oracle 10g on a Redhat ES 3 box, and the install went okay, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it. I have been told that this previous partial installation may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Is there any configuration changes I can make to resolve it? Also, what does this message actually mean?
I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

Repeated 'ORA-12547: TNS: lost contact' messages after installing Oracle 10

Hi,
I installed Oracle 10g on Redhat ES 3, and the install went well, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it.
I have been told that my previous partial installation of Oracle 8 may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Are there any configuration changes I can make to resolve it?
My problem sounds like it may be similar problem to a recent posting by Hugo Ferrer - but my Spanish isn't good enough to fully understand Hugo's problem. Anyways, I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

HTTP 400 after installing Oracle XE

I installed Oracle Express Edition 10G on my windows xp mahcine, and after that i am supposed to open up a database home page,
but the url http://127.0.0.1:8080/apex gives me a http errorcode 400 (bad request).
I would like some advice as to what to do.
I have made sure the port is open in my firewall...
/ David

After running this i get:
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-AUG-2009 14:44
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-AUG-2009 10:33:55
Uptime 0 days 4 hr. 10 min. 34 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mymachine.local.net)(PORT=
1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 3 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
But unfurtunately i cannot connect to either http://127.0.0.1:8080/apex or http://127.0.0.1:8081/apex.
The error is still the same on 8080 but with 8081 it waits for a long time before timing out.
/ David

?? Bad registry creation after install Oracle 8.1.7 / Developer 6i

Similar Messages

Maybe you are looking for