Bad Request No connection to Docbase -connection test fail SAP & Documentum

Hi All,
We are integrating SAP R/3 with Documentum v 6.6 document management system. There is a repository created using OAC0 transaction.
Archive ID : <value - same as Documentum Archive ID>
Content server Version : 0.46
HTTP Content server <Documentum server ip > Port <xxxx>
HTTP script : \assap\archivelink\<Documentum share >
When we do test connection it throws an error states "400 bad request : No connection to docbase". If we change any values in HTTP script it throws error 404 not found. It means with above configuration is correct the connection is getting tested but with error statement "400 bad request : No connection to docbase".
Is there any thing which is missing ? Please let me know your expert advices how to proceed further.
Regards,
kishore

Hi All,
Issue got resolved. Please check if there is any network related issues ( firewall issue will also leads to same error ). After this there was another issue in deployment / configuration of the AS SAP services on documentum.
Please check network and documentum for these type of issues.
Regards,
Nanda

Similar Messages

SQL Developer Connection Error: Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection

Hi, I'm running the following setup:
Mac OS X 10.8.4
Virtual Box 4.2.16 r86992
Oracle Developer Days (don't know the version, just downloaded it)
SQL Developer 3.2.20.09
Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
$ ping 192.168.56.101
PING 192.168.56.101 (192.168.56.101): 56 data bytes
64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
^C
--- 192.168.56.101 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
$ telnet 192.168.56.101 1521
Trying 192.168.56.101...
Connected to 192.168.56.101.
Escape character is '^]'.
asdf
asdf
Connection closed by foreign host.
When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760d

Hi Ali,
This may be of varoius reasons..
Is the database that you are connecting on the same PC?
You have specified Hostname: localhost.
If not please replace it with the IP of that server.
Else please check whether the database listener is started or not. if not please start the listener.
Check the SID by tnsping command.
Hope this will help you..
Thanks
Ashok

HTTP Error Code 400 Bad Request error when connecting to SQL db

I realized I should move this to a new post since it was a new question...
I am trying to connect to a distributed SQL database from CS4.
Let me show you how the connection is built... and then maybe someone can tell me what I am doing wrong...
First I go to the database panel:
I click on the '+' sign to add an MS SQL Server Connection:
That brings up the SQL Server Connection window where I am supposed to replace the placeholders with my server values:
After I enter the correct values and click test, I get the error (HTTP Error Code 400 Bad Request)... These values work from SQL Server Management Studio on the same PC.
Just as a side note... I tried one other thing that makes me think SOMETHING is wrong here:
If I choose as OLE DB Connection instead... and click the 'Build...' button and then enter the values in the Data Link Properties Window (OLE DB Provider for SQL Server, and then the connection info on the Connection tab) and then click Test Connection on the Data Link Properties window, it says my test succeeded. Then I click 'ok' which takes me back to the OLE DB Connection windows with the connection string pre-filled, and click test on THAT window and I get the same HTTP Error Code 400 Bad Request error...
Hopefully that is enough detail that someone can can tell me what I have broken?
Thanks,
Mike

You will get a better response if you ask this question on the DW Application Dev forum. This forum mainly covers client-side issues.

CTS1.4.1 Samples JDBC test failing with Error in allocating a connection

Tests under CTS1.4.1 samples>>JDBC>>ee>>testConn>> are failing with the following error :
Sep 14, 2005 4:27:55 PM com.sun.gjc.spi.DSManagedConnectionFactory createManagedConnection
WARNING: RAR5113 : Error creating connection from supplied information: Reason - Error while parsing address
Sep 14, 2005 4:27:55 PM com.sun.enterprise.resource.LocalTxConnectorAllocator createResource
WARNING: RAR5038:Unexpected exception while creating resource
Sep 14, 2005 4:27:55 PM com.sun.enterprise.connectors.ConnectionManagerImpl internalGetConnection
WARNING: RAR5117 : Failed to obtain/create connection. Reason : Connection could not be allocated because: Error while parsing address
Sep 14, 2005 4:27:55 PM com.sun.gjc.spi.DataSource getConnection
WARNING: RAR5114 : Error allocating connection : [Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address ]
ERROR: SQL Exception : Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address
ERROR: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:72)
at com.sun.ts.tests.samples.jdbc.ee.testConn.testConnClient.getConnection(testConnClient.java:252)
at com.sun.ts.tests.samples.jdbc.ee.testConn.testConnClient.setup(testConnClient.java:91)
But the mystery is that the main set of JDBC tests (outside of samples) in CTS1.4.1 are running fine.
One difference I notice is that the tests that are failing use "createManagedConnection".
The main configurations file "ts.jte" present under %TS_HOME%\bin has all the settings correct. Thats why the main JDBC tests go through fine.
I wonder where these failing tests pick up the bad "address" from.
Any help on this would be greatly appreciated.
Thanks !

CTS is a paid product and any question regarding that should be answered by a Licencee Engineer. Pls contact the LE regard the setup of CTS or any TCK.

WRT54G ver 6, MTU test fails when trying to connect to Xbox360 live

MTU test fails when trying to connect wirelessly to Xbox360 live. Firmware is current. I have a WRT54G version #6, Motorola Surfboard SB5101 Cable Modem, running AOL HighSpeed Broadband through Time Warner Cable. Changing the MTU setting does not work. I have tried several other suggestions found on these boards but nothing seems to work. Any help would be greatly appreciated!

hi twhale.... If you had already tried the settings i posted ... in such case you can do one thing .... access router setup page ... under Security ... uncheck block wan request ... click save settings .... Under Applications & Gaming tab ... click port range forwarding .... forward ports 88 & 3074 for the static Ip of the X-BOX ... click save settings . Click save settings ... check X-BOX live test ... if still shows the same error ... upgrade/reflash the firmware ...

How to post multiple http requests using a single http connection in java

I am using the httpurlconnection class and it allows only to post one request on a connection. I require to post multiple http requests by opening a single connection. Code examples please. Thanx in advance.

Hi
I found this article through Google. I hope it helps a little
http://www.developer.com/tech/article.php/761521
D

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

HOW TO RESOLVE(Test failed: The Network Adapter could not establish the connection)

Hii
I want to create new databse as sysdba in jdev.I followed the steps as given in
Oracle JDeveloper 11g Release 2 Tutorials - Designing and Building Database Tables
In step 7 create database user and database connection, I am not able to do that and getting the error
(Test failed: The Network Adapter could not establish the connection).
Please help me.

Hi,
Could you please provide all value you pass to the connection properties on the connection creation panel? First of all, you should choose "Generic JDBC" as the connection type in order to use BDB SQL JDBC driver.
Regards,
Cindy

Test-ActiveSyncConnectivity fails with The remote server returned an error: (400) Bad Request.

Hi all,
I'm on the process of transition from Exchange 2003 to 2010, everything is going perfectly alright however ActiveSync is bugging me!
when I try to test activesync I get the following error:
[PS] C:\>Test-ActiveSyncConnectivity -MailboxCredential $user -TrustAnySSLCertificate |FL
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : SITE
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : cas01
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : Options
ScenarioDescription : Issue an HTTP OPTIONS command to retrieve the Exchange ActiveSync protocol version.
PerformanceCounterName :
Result : Success
Error :
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : 00:00:00.0312496
EventType : Success
LatencyInMillisecondsString : 31.25
Identity :
IsValid : True
RunspaceId : 136b8f68-26ec-4e29-a5bb-cf5ee816e04b
LocalSite : Reckon_NS
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : CASSERVERNAME
LocalSiteShortName : SITE
ClientAccessServer : CASSERVERNAME
Scenario : FolderSync
ScenarioDescription : Issue a FolderSync command to retrieve the folder hierarchy.
PerformanceCounterName : DirectPush Latency
Result : Failure
Error : [System.Net.WebException]: The remote server returned an error: (400) Bad Request.
HTTP response headers:
MS-Server-ActiveSync: 6.5.7638.1
Content-Length: 46
Cache-Control: private
Content-Type: text/html
Date: Wed, 12 Dec 2012 02:02:23 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
UserName : user1
StartTime : 12/12/2012 1:02:23 PM
Latency : -00:00:01
EventType : Error
LatencyInMillisecondsString :
Identity :
IsValid : True
environment:
Ex 2003 'Exchange' virtual directory permission: Integrated Windows Authentication, Basic
Ex 2003 'OMA' permission: Basic Authentication
Ex 2003 'ActiveSync' permission: Integrated, Basic
Ex 2010 successfully redirects users from 2010 to 2003 webmail if you login to OWA with a mailbox on 2003

Yes Martina,
It has been done through ESM
I cannot test using testexchangeconnectivity.com since I cannot put the 2010 one into production, I will get into trouble if I change the DNS record to the new mail server!
Yes, EAS works perfectly fine with 2010 mailboxes.
OK.
It might be that it's not possible to run Test-ActiveSyncConnectivity against a mailbox stored in Exchange 2003.
Installing KB937031 and enabling Windows Authentication is really all that needs to be done in EX03, in order for Exchange 2010 to proxy the EAS requests.
Martina Miskovic

JCO Connection test fails taking wrong IP Address

Hi All,
We are configuring JCO Destinations(MODEL & METADATA) for ECC 6.0 system. Our portal is on EP7.0 SP8. Our server i.e.ECC and Portal are in two different networks.
The problem here is, for our ECC system we have two IP Addresses.
1. Internal IP Address (130...*) -- on which our ECC system is configured
2. External IP Address (10...*) -- to access the ECC from outside network.
We are able to connect to ECC system with external IP address from Portal server using SAP GUI. We have configured hosts file entries referring ECC system for external IP.
We have configured the ECC system in SLD and configured the JCO destinations for the same. But, Connection tests to the JCO system are failing (partner not reached) as it is referring to internal IP even though we have configured ECC system for external IP address in portal server.
We are getting the follwoing error for JCO Connection test:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=sapsys GROUP=ESS R3NAME=SYS MSSERV=sapmsSYS PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '130.7.8.88:sapgw00' not reached TIME Thu Dec 21 10:25:24 2006 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2764 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
<b>Why JCO destinations are trying to connect ECC system using the internal IP address even though we didn't mention it anywhere in our portal server configurations?</b>
Please Suggest
Thanks much in advance.
Cheers...
S..S

Hi
Please try this:
First remove the configured ECC from SLD.
Logon the SAP R/3 (ECC).
Run rz70 (T-code).
Enter the serverIP:port of the EP server in the host.
Enter the sapgw in the service.
Check the option SLDRFC for test and activate the current configuration
Then again add the ECC in your SLD.
And please check the entry in the host file also and try to ping the ECC server from the EP server.
Hope this will help you.
Thanks & regards
Arun Singh

System Landscape connection test fail

Dear EP expert,
I try to do a System Connection Tests for my system landscape and some part of the test failed.. Anyone have idea what is wrong with the configuration. Below are the test result and mainly are the HTTP/S connection and user mapping failed.
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (devportal01:50000)
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (absmrq01:8001)
6. User mapping is not valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Thanks,
Regards
Bryan

Hello gurus,
I am facing the same problem, could you please help me, the problem is http error detailed below
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name
6. User mapping is valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection successful
Thanks
Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM
Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM

INTEGRATION_DIRECTORY_HMI Connection test fails

Hi ,
I am trying to configure INTEGRATION_DIRECTORY_HMI but the connection test fails as user cannot be authenticated. I found out that I need to put user XIISUSER in the logon tab. Now problem for me is that I do not know the password for XIISUSER.
Then I tried to search the user XIISUSER in SU01. For my surprise it was not there.
Can anyone tell me the steps to create XIISUSER and what roles I need to assign and where I have to register this user.
Thanks.
Regards,
Rahul

Hi,
Try to use PIISUSER instead.Its default password is the master password that you can be given from the basis.
Regards
Yu Ming

ODI Agent Test Failed -Connection timed out

Hi,
I have created an agent and launched it as a scheduler agent using command :
./agentscheduler.sh -name="Agent_Test" -port=20911
it gives message -Server Launched
However when I test it in Topology Manager in Physical Architecture , it gives me error-Agent Test Failed-Connection Timed Out.
Any pointers to why is this error appearing and how it could be resolved ?
Thanks!

Check the port number and also the odi parameters in odiparm.sh
Thanks,
Nagarjuna

Workflow configuration error - System Account connection test failed

Hi,
Has anybody faced a problem with Workflow configuration? The version we are using is 2.6.2 on Oracle database 9.2.0.5 on AIX5L. The workflow installation from 9.2.0.1 installation CDs goes through without any problem. But when the workflow configuration tool comes up it fails with the following error.
"SYSTEM account connection test failed".
The system and sys accounts are fine as verified by sqlplus. Any help is greatly appreciated.
The log file is shown below.
Workflow Configuration Assistant-AIX
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA:
WorkflowCA: Screen width -2304-, screen height -1024-
WorkflowCA: Graphics User Interface mode
WorkflowCA:
WorkflowCA: Language - US
WorkflowCA:
WorkflowCA: Start testing connection, which takes less than 3 minutes.
WorkflowCA:
WorkflowCA: Account connection test for SYSTEM
WorkflowCA: SQL Thread: Thread[TstSQL,5,main]
WorkflowCA: chkSQL: true
WorkflowCA: cmdLine: /app/oracle/product/9.2.0/bin/sqlplus system/<Masked Password> @/app/oracle/product/9.2.0/wf/sql/wftstcon.sql
WorkflowCA: envVar[0]: -ORACLE_SID=rsdb-
WorkflowCA: envVar[1]: -ORACLE_HOME=/app/oracle/product/9.2.0-
WorkflowCA: envVar[2]: -WF_RESOURCES=/app/oracle/product/9.2.0/wf/res/wfus.res-
WorkflowCA: envVar[3]: -TZ=EST5EDT-
WorkflowCA: envVar[4]: -WF_NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1-
WorkflowCA: envVar[5]: -PATH=/app/oracle/product/9.2.0/bin:/app/oracle/product/9.2.0/lib:$PATH-
WorkflowCA: envVar[6]: -LD_LIBRARY_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: envVar[7]: -WF_TNS_ADMIN=/app/oracle/product/9.2.0/network/admin-
WorkflowCA: envVar[8]: -WF_SHLIB_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: Exit Val : 126
WorkflowCA: chkSQL is alive after 1 seconds: false
WorkflowCA: SYSTEM account connection test failed.
WorkflowCA: Terminating...
Thanks,
Chethan

We had this problem on 2 machines.
On the 1st machine, we tried the local install option after a few days (Local option with no connect string) and it worked with no problems!
On the 2nd machine, we could never get it to work even after opening a tar with Oracle. Finally we did a remote install from the 1st machine into the database on the 2nd machine. During the remote install while running wfinstall on the 1st machine, we just had to choose the remote option and the database service name for the connect string.
Thanks,
Chethan

CPA Cache Connectivity test fails

Hi All,
We are facing the following issues that have to do with the Adapter Engine:
1) In RWB, the Adapter Engine is in error/red status with the following details: Adapter Engine, message: fatal DeleteJob (Default Delete Job) failed.
2) In RWB, the Cache Connectivity Test fails with the following error: Communication with JMS server failed.
3) The CPA Cache refresh gives erros.
Any ideas? There are no Service users locked, SLDCHECK works fine etc.

Hi,
It seems to like problem with your JMS Connector.
For this, login into Visual admin -->cluster >services>JMS connector-->runtime (tab)->check the factories / destinations. Please contact with your basis team, they will might be helpful to you. After that restart your server, it will solve your issue.
Regards,
P.Rajesh
Edited by: Rajesh_1113 on Jun 5, 2011 9:01 AM

Bad Request No connection to Docbase -connection test fail SAP & Documentum

Similar Messages

Maybe you are looking for