Bad runtime iphone 6

Hello,
my iphone 6 has a very bad Runtime - I think. In standby, with little use, the battery is after 15-18 hours off.
At the beginning the standby time was approximately 2 days. The support told my, the battery is OK.
I reset the iphone, stopped the backround apps and the location service. The runtime isn't better.
Does anyone have an idea? It looks like the phone has no standby ;-<.
Actual the phone told me : using : 15 minutes, Standby : 5 hours and battery is by 68% - I think that isn't normal ?!
Ralf

Settings>General>Usage>Battery Usage.
This will show you exactly what's chewing up the battery life.
What is at the top of the list?

Similar Messages

Using a power bank good or bad for iphone battery lifespan?

I currently use iphone 5, i see many aid product made now such as power bank,
but a question comes in my mind , is that good or bad for our battery lifespan?

Are you referring to cases with battery packs in them?
If so, most have a switch to turn the battery in the case on or off.
Having the iPhone or any phone in a battery case is neither good or bad. It is merely a way to extend the "life" of the device between charges without the need to physically plug the device in as there is always the extra battery onboard.

Can I clean a bad esn iphone 4?

Hello,
I have a bad esn sprint iphone 4 and i was wondering could i clear the esn so i can use it with sprint again? The seller said it was a bad esn because there wasnt a payment done
Thanks!
My phone is a cdma no sim tray!

You will need to call Sprint or go to a Sprint store and see if they will let you pay it out. It could be a rather large payment that is worth more than the iPhone and you will only be able to use that phone with Sprint.

Cold weather bad for iphone?

I had my iphone on the charging dock last night as usual, but the window was open and fan was on low. it got to approx 40ºf last night. Well I woke up this morning and it wouldnt turn on. Once the phone warmed up it turned on, but was in recovery mode! Then I got to work, plugged it in to itunes and it reset it, and all my data is gone!! All pictures, music, contacts, etc. It's like I just took a new phone out of the box! What gives?

Sportrider12584,
The iPhone product specifications is at this link states:
iPhone Specs:
Environmental requirements
Operating temperature: 32° to 95° F (0° to 35° C)
Nonoperating temperature: -4° to 113° F (-20° to 45° C)
Relative humidity: 5% to 95% noncondensing
Maximum operating altitude: 10,000 feet (3000 m)
http://www.apple.com/iphone/specs.html
Recovery mode indicates that the iPhone wasn't able to complete its startup check. If it has gotten too cold, I would recomend letting it warm up some more, and then reset it before trying a restore.
Restoring the iPhone reformats the iPHone, and reloads the iPhone's firmware and software. Once you have restored the iPhone, it is just like a new iPhone, unless you choose to load synced data from backup. However, information since the last sync is lost. Photos that have not been downloaded to the computer are also lost during a restore.
Nathan C.

Bad support iphone 5c

I ve got it 3 weeks ago with kpn. Now my screen has well-known flows (1 un 1000 has). Now no-one wants to replace it, only send it in and i have tomiss 2 weeks without any phone in the mean time. Is this a known situation? Any suggestions?
george

No. Syncing an iPhone 5C or any other device running iOS 7 from a Mac requires Mac OS X 10.6.8 or newer, which requires a Mac with an Intel CPU and at least 1GB of RAM.
(107617)

Bad runtime of 0PM_OM_OPA_1 in productive r3

hi,
i have a problem with the runtime of 0PM_OM_OPA_1 in productive system. for one month of data (about 30.000 to 40.000 dataset's), it needs > 10 hours. the most time i see the process on reading the table COSP.
if i run the extractor on in test system, it just needs 10 minutes for the same selection.
few days ago we copied the productive on the test system. o the data is nearly the same.
we did a sql trace, and it seems that in productive system the extractors reads an other index compared to test system.
what could i do ? rebuild indices ?
kind regards !

Hi Tobias,
You can try tracing by using trx ST05 (just some minutes, not all 10 hours) and check the tables involved in the extraction. Then you can check those tables indexes, using trx SE11 and by accessing the database. You may need, as you say, to rebuild those indexes. You can use Test system to compare the indexes.
Hope this helps.
Regards,
Diego

Will Apple replace an EXTREMELY BAD condition iPhone 5?

I bought it off eBay for quite cheap, it has scratches all over and the worst of all, the previous owner had sanded the bezel for some reason. Well anyways the condition is not the reason I want to exchange, it has a dodgy home button and over the past few weeks I have noticed the earpiece sound is getting lower and lower.

I know for a fact that they change damaged iphones for a price. I don't know whether or not it would apply for this kind of clearly intentional damage, though.

Bad reception iPhone 5

Service has been very bad at my house with this phone. Verizon did a network push and sent me a new sim and neither has helped. My wife has a Droid Bionic and when she's sitting on the couch beside me she has 3-4 bars with 3g i only get 1-2 and hardly get 3g. I need help before i got back to android.

This is a user-to-user technical help forum. We are all just users here and cannot solve your problem. Check to make sure that any case you may be using is not causing signal problems.
Otherwise:
You should contact Vodacom and/or Apple Support for assistance.
See http://support.apple.com/kb/HE57 for Apple Support numbers.

Mp3 sounds bad on iphone

I am new to iTunes and iPhone 4.
I have an existing collection of cd's, that I did copy into MP3, while using 320kbits sampling rate (I only remember the number).
If I listen to them, I can hear that the quality is a bit lessor then the original. But, I can live with it, as I will never listen to the MP3 on my hifi set.
I did drag the MP3 out of explorer, into a iTunes folder, which seems to be coupled to my iPhone 4. That resulted in creating, more then one album per cd, but I found out how to repair that (lot of work).
Then I started to listen on the iPhone with the apple headphone set.
My first thought was, pretty clear, but... I miss something.
I could not put a finger on it. So I plugged in my old Sony headset.
It sounded better, but I was still missing things.
Then I heard it.
It sounded like the high tones and basses where cutoff.
And there where the music should be very rich in detail, it sounded cluttered up.
There where a violin stops playing, you normally here it fade out to 0, but now it stopped half way the fading process.
Then I tried to listen through the PC speakers.
I loaded iTunes and what seems to be, loading music from the iPhone and played via the speakers. Meanwhile I compared it, by listening to the original MP3, while using Windows Media Player 11.
I could hear a huge difference. The music via Media Player was more open, No high tones or basses cutoff, no cluttered, but detail, and fading out, did not cutoff either.
Via iTunes, I heard exactly, what I heard on my iPhone.
Cutoff high and basses, no detail, all cluttered up, and cutoff fade outs.
When I look under Info, it says that the MP3 was created at 320kbs.
My question is, why has an MP3 get such a low quality on my iPhone?
BTW, I did not change any settings in iTunes.

I have just tried something out:
I used iTunes. Made several MP3 with 320kbps setting, and the same numbers and settings for AAC.
What I heard was, that the MP3 sounds a bit muffled when played in windows media player and iTunes.
The AAC sounded a bit better then the MP3 with Windows Media player, but it sounded high pitched in itunes.
I could here more detail with the cd.
I listened to the Zauberflöte.
Very odd, when put on the iPhone, I only see the numbers once. but which one?

The IOS8 is very bad to iphone 4s, not work!!!!

My iphone 4s doesnt work with IOS8! How can I change to IOS7?

There is no way to go back to iOS 7. Apple is trying to perfect iOS 8. And now iOS 8.0.2 is available and it fix some bugs in iOS 8. Maybe you can update to it or wait until iOS 8 becomes perfect and then update.

Speakers bad on iphone

My speakers starting making grumbly noises, then just quit working. No ringer now at all. Any ideas?

Do the basic troubleshooting steps described in the User Guide, Appendix B: Reset phone, Restore phone in iTunes using a backup, Restore in iTunes as new, without using a backup. If restoring as new doesn't help, there is a hardware failure that needs evaluation by Apple or whoever provides iPhone warranty service in your country.

Mobile website is bad. - iPhone 4 & 4S

http://www.lakecountyroadside.com/
The mobile website was working fine for a week+ and all of the sudden I checked it today and it's not loading right.
It doesn't zoom to the actual page size and it makes the page really long vertically too. I can scroll down 5 times longer than this image and it's all blank too.
I tried adding: <meta name = "viewport" content = "width = 380"> and it didn't help.
I disabled Javascript and it didn't redirect to the mobile website at all.

Don't add your own viewport metadata. It will just conflict with, or otherwise prevent, the viewport metadata generated by Muse from working correctly.
Javascript is required for the proper display of Muse sites. It's used to compensate for variations across browsers as well as to provide much of the functionality of interactive objects.
The improper resizing of this page is caused by one or more objects being outside the bounds of your page in Muse Design view. Mobile browsers resize the content on the page to fit to the device width. Thus if there are objects (even something like an empty text frame) outside the bounds of the page it will cause this incorrect initial zoom.
Go to Muse Design view for the page. Go to the Object menu and select Unlock All On Page. Select All and look for objects outside the boundary of the page. In this case way off on the right.
Repeat the process for the master page that's applied to this page, if any.

Is the Iphone 4S battery really that bad ?

Hi I'm looking for a new phone and Iphones have always appealed to me. I've heard about how bad the Iphone 4S battery is and even heard some people have to charge it mid day - is this true ?
Is the battery really that bad ?
I'm also trying to decide on whether to buy the Iphone 4S now (full price, £500) or wait until the Iphone 5 (if it) comes out ?
If I don't but an Iphone now I'll probably buy the New Ipad as I feel really restricted on my 1G Ipod Touch and using a laptop feels really clunky
Thanks in Advance

ijoely wrote:
Is the battery really that bad ?
You're going to get as many different answers as people who post. Keep in mind that the vast majority of people who post on a technical support forum are people who have problems. It's not exactly an unbiased sample. My battery is fine.

Appointment time on iPhone 4 different from iCal on MacBook Pro

The appointments in my iPhone calendar are one hour earlier than the appointments in iCal on my MacBook Pro. Is this a bug in the daylight savings time logic?
Message was edited by: CPalameda

May bad. IPhone was set for wrong time zone.

Clean install and iPhone

I'm convinced that I need to do a clean install of Leopard (I did Archive and Install, but I haven't done a clean install since Panther, and I just want to start fresh).
How will this affect my iPhone? When I'm done with the clean install will my iPhone be recognized as activated, etc.? Will I be able to sync my settings (Mail accounts, Address Book, Calendar) back to my MacBook Pro from the iPhone (I will definitely backup my MBP first, and can restore these data files from the backup, just wondering if I could restore from the iPhone if I wanted).

If you set up your admin account with the same user name and password as before, you should not have any problems with your iPhone syncing. Too bad the iPhone has no "disk mode" like the 'pods.

Bad runtime iphone 6

Similar Messages

Maybe you are looking for