Bad screen? I cant tell

Hi There,
about 4 days ago I rushed to my semi local computer store to find that they finally had touches in stock. But unfortunately it is a 9c37 one...however i got it home, 0 dead pixels, and I cant even really tell if it has negative blacks or not. I tried the lagom site but i just dont know, is there any other way to test if my screen is bad. And it came with 1.1.1 preloaded so could it be refurbished or something?
Thanks

unlike some other electronics manufacturers, apple actually sells refurbished ipods as being refurbished- not new. anyways, about the first question, if it doesnt bother you, is there a problem? my first one i noticed, so it was an issue. if you cant see it, no problem. thats the way i see it atleast if you checked all the screens on that site. check the one with the grey squares over the white background though. thats the one that should tell you whats goin on.

Similar Messages

Ihave a emac 1002 emc 1955 that igot from a auction,when i turn it on it never gets pass the loading screen and cant get into utilities

i have a emac 1002 emc 1955 that wont go pass loading screen and cant get into utilities,i got from a auction and dont want to take it apart if i dont have to so looking for a little help before it goes that far.thanks

Hi Mike, the Keyboard shouldn't matter, it should be OK in that respect.
Your kind of stuck without any Install Disc to try to repair it or reinstall, but...
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (name_of_volume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: ***** FILE SYSTEM WAS MODIFIED *****   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Does it boot into Open Firmware with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238

I want to enhance customer(XD01) with BADI screen

hai sap-abap gurus
I want to enhance customer(XD01) with BADI screen to populate custom fields and store its information. can anybody tell how to find out proper BADI for screen enhacement ? and how to Implement?
pls tell me the detailed steps?

Hi,
1) Use the BADI's CUSTOMER_ADD_DATA & CUSTOMER_ADD_DATA_CS.
CUSTOMER_ADD_DATA -This BADI used to activate the screen group and checks for account group
CUSTOMER_ADD_DATA_CS -This BADI used to include the custom screen.
2)Your code group need to be configure in SPRO before doing the work.
Regards
Kiran Sure

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this?

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this? I have restarted my computer multiple times, **** it down, and ran a diagnostic test to tell me nothing is wrong and my computer is not running any applications. There is no reason for the fan to be on full blast! when I try to set the option to show my battery icon in the menu bar, it will automatically uncheck. How do I fix all of this?

Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

TS3694 my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
worth looking at for the future to understand backing up etc

I have a samsung intensity ll.How do i get rid of a small box with AA off of my main screen?Cant figure out what setting it is.

How do i get rid of a small box with AA in it on my main screen? cant figure out what setting it is on my samsung intensity ll ?

Good deal (the AA stands for Auto Answer, by the way; and I like your avatar )

ICloud alert message about backing up is frozen on my screen. Cant access anything on my ipad. How do I get this alert message of my ipad screen?

A iCloud alert message about backing up is frozen on my screen. Cant access anything on my ipad. How do I get this alert message of my ipad screen? I have plugged my ipad to power and it is connected to Wi-Fi. Tried holding down on-off switch but nothing happens, can anyone help me with this please.
Cheers Anne

Hello Trish3,
Welcome to the HP Support forums. I understand that after replacing an ink cartridge in your Officejet 4635 you are getting a pop-up message about HP ePrint.
Would you please post a screen shot of the error that you are receiving? I have included a link to the "How to take and post a screenshot on HP Support Forum".
That will help me in ensuring you get the correct answer for your issue.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How do I get the little screen back, that tells me how much ink I have left in my print cartridges?

How do I get the little screen back, that tells me how much ink I have left in my print cartridges? It used to show up whenever I would print something, now it doesn't and I have no idea how much ink is left in the cartridges. I have a HP Photosmart C4180 All in One Printer. I recently purchased new computer, a HP Pavilion P7-1254 AMD Vision, which runs Windows 7. I just want to know how to get the screen back that tells me how much ink I have left. Thanks.

Hi there pyesangel,
Open the Printer Toolbox . There are two ways to do this:
Open HP Solution Center , select the Settings menu, then the Print Settings submenu, and finally the Printer Toolbox .
Open Printers and Faxes in the Windows Control Panel , then right-click your printer icon and choose Properties . Click Printing Preferences . Click the Features tab, then click the Printer Services button.
The Printer Toolbox opens. Click the Estimated Ink Level tab. A cartridge may be running out of ink even if the graphic shows ink remaining (see the note at the start of this section). Lines or streaks always appear in printouts when the cartridges begin to run out of ink. Replace print cartridges that are out of ink or low on ink.
Figure 1: Estimated ink levels
Give it a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Badi / Screen Exit for ME51N

Hi Folks,
My requirement is to add a standard field in the existing tab . Is there any BAdi / Screen Exit provided for tcode ME51n. I have checked the provided Exits and BAdi's but all of them are to add a new tab. But in my case I want to add a field in the existing tab.
Kindly let me know the possibilities.
Thanks in Advance.
Somu

Hi Soma,
As i know it is not possible . Better to add a new tab and add fields there.
Regards,
Madhu.

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).

Read
https://discussions.apple.com/message/15659267#15659267

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

just bough OSX Mountain Lion, my laptop operating with v10.6.8. Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion.

Badi Screen Enhancement

Hi Experts,
         I got stuck in BADI please help me out.
        In QA11
           there is a sub screen which can be called by a BADI
       the following is the piece of code which calls the BADI
Now my problem is the statement   CALL SUBSCREEN BADI_SUBSCR_1101.
Is net getting executed
I understood that this is a screen enhancement which can be done thru BADI
for this I had created an Implementation by using the relevant BADI definition
and also had activated the Implementation and had kept some break-points in the available methods
but the prog flow is not getting into the point where I had kept break-point. seems the badi I had implemented is not getting executed at all
Actually before reaching this point the prog is checking of the available implementations for this QA11 and in that list the implementation I had activated is available(from debugging I had ensured this) but still the statement CALL SUBSCREEN BADI_SUBSCR_1101. Is not getting executed,,
Is anything I am missing to make a BADI into existence??please help me experts,,if you feel I have to give more elaborately,,i will do the same
     PROCESS AFTER INPUT.
       FIELD QALS-CHARG MODULE CHARGE_D1101 ON REQUEST.
BAdI Subscreen
          CALL SUBSCREEN BADI_SUBSCR_1101.
     thanks in advance

hi Ashok,
thanks for your imm response
I guess you are refering to the subscreens assignment in the implementation
As of now i had done these assignments
Subscreens(tab)
calling prg           scr no           subscreenarea                               description
SAPMQEVA     1101     BADI_SUBSCR_1101                   BAdI-Subscreen
does the calling prg refers to the prg from which i require the BADI screen to be called or does it refers to something else?/
can u clarify?
And please if it is not an Issue to you can you plz share ur mobi number
thankz in advance

Hi i have ipod nano 4g i know that it has nike+ipod but i can't enable it. it doesn't even appear on screen can U tell me what is the reason?

hi i have ipod nano 4g i know that it has nike+ipod but i can't enable it. it doesn't even appear on screen can U tell me what is the reason?

That sounds like an idea.I've had trouble with Verizon a lot .I I switch ed back to a non andriod phone cause of the expense it took 3 months and at least that many hours of phone calls &store visits to straight in it out...there's been many times things are blocked and a month later its back on the bill,u call and are told they can't do anything ...not there problem, can't b fixed from there end,I asked to talk to a sup. At was told I couldn't then she said I'd b told the same thing I insisted...I was on hold for about 20 minutes I hung up tried to call back they would not answer, I called my daughter had her call they answered when she told them they tried to blow her off too, so she went down to a store and made a complaint.. I don't have a store in our town,the customer should not have Togo through all that trouble some of this is down right criminal... I'm going through more problems again....they won't Evan discuss it with me unless I pay what's owed and the amount has still got the internet fees they've never taken off.

HT1414 How can I turn off 'Find my IPad in settings if nothing is appearing on the screen ie cant navigate to Settings on the Ipad

How can I turn off 'Find my IPad in settings if nothing is appearing on the screen ie cant navigate to Settings on the Ipad

Hi Jim
Thanks, held down the buttons and the apple logo appears in a flash, then nothing. Screen goes black.
I am trying to restore the ipad through itunes, but it keeps telling me to turn off the find my ipad.
Any other suggestions please??

HT204291 Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

You are prevented from Airplay mirroring certain things like DVD content as the material is usually protected so you get a checkerboard type display. I think there is a theoretical risk that the Airplay stream could be intercepted and the protected video copied, albeitin lower quality.
Apple may be being cautious or are required to do so with the DVD player app by movie studios/licensing authorities. It makes no sense to the average consumer who is just trying to send their purchased DVD to the TV via the computer and AppleTV.
Playback in something like VLC should work - not tried it myself but others have commented it doesn't have the restriction.

When setting up my apple id for the apple store I get to the credit card screen and it tells me I have to contact support to finish. I can't seem to contact support as there is no number for them on this type of issue.

When setting up my apple id for the apple store I get to the credit card screen and it tells me I have to contact support to finish. I can't seem to contact support as there is no number for them on this type of issue. How the **** to I talk to a person who can fix this?

It's a real problem when you're deployed outside the US and your billing address, though totally correct, is not. This seems to be a common complaint. I think the billing address vs. your present location causes some security concern or similar nonsense that prevents progress.
The only way I know of to resolve this is to contact iTunes Support by email. I have never had to wait more than a day for a response:
http://www.apple.com/emea/support/itunes/contact.html
The response should not be "automated'. Explain your circumstances. You deserve a personalized response.

Bad screen? I cant tell

Similar Messages

Maybe you are looking for