Bad Server Name Cache

Hello,
Is there an equivalent of the Bad Server Name Cache in the settings for Novell Client 2 for Windows 7? We need this to get our Windows 7 clients working properly with DSFW, but it appears Novell removed this setting, for some reason.

Originally Posted by chewmanfoo
Hello,
Is there an equivalent of the Bad Server Name Cache in the settings for Novell Client 2 for Windows 7? We need this to get our Windows 7 clients working properly with DSFW, but it appears Novell removed this setting, for some reason.
I checked with a member on the Novell Client team. The Novell Client for Windows 7 does not have this configuration setting. So other option available is to change the 'Network Provider Order' to list Microsoft Client ahead of Netware client.
Thanks,
Praveen Kumar

Similar Messages

AIX-Installation-Http Server-"httpd: bad user name porting"

Hi Every Body,
Thanks one and all.
With all of your Support we Installed and Developed HTML DB Application in Windows 2000 Environment.
Development in Progress...
So we decided to install and invoke its future thru AIX environment.
As per desicion
Installed Succesfuly.
But While Starting the "apachectl" the following Error occurs.
httpd: bad user name porting
./apachectl start: httpd could not be started
I have tried with my little knowledge but could not start it.
Any body face this type of problem ?
Kidnly guide me .
Any suggestion will be appriciate.
Best Regards
Perumal swamy.R

Hi,
THanks in Advance.
I have now started HTTP Server successfuly and configared also.
But While Accessing "http://s2.shanthigears.co.in:8020/pls/htmldb" the following error occurs.
Authorization Required
This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.
Kindly guide to me.
Best Regards
Perumal Swamy.R

Bad server cache issue

Hi all: Our remaining XP computers are running the Novell Client 4.91 SP5 IR1. I recently moved the locations of directories we use for folder redirection to another server. When my users log into some of these XP computers, they receive a message that the folder is not available (\\server_path_to_folder) yet they can browse to a mapped drive on that same server (I:\something). I was advised by Novell to turn off the bad server cache and set the associated timeouts to 0. However, this problem persists.
Has anyone seen similar behavior? And how did you fix it?

Thanks for the reply. I should have mentioned we use group policies via ZCM 11.2.4. I have also check the registry and all is fine. If I wait for 5 minutes, the default timeout period which I had set to 0, then everything begins to work.
If I knew how to clear this cache maybe I could work around the problem.
>>> laurabuckley<[email protected]> 2/17/2014 10:26 AM >>>
Hi,
I'm not sure of the method you have specifically used for folder
redirection, but, was that mechanism ever updated and pushed down to the
workstation correctly? That's where I would look.
Cheers,
Laura Buckley
Technical Consultant
IT Dynamics, South Africa
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below...
laurabuckley's Profile: https://forums.novell.com/member.php?userid=122
View this thread: https://forums.novell.com/showthread.php?t=474830

"Disable Bad Name Cache" and "Disable Bad Address Cache"

hi,
on some issues it helped to deactivate "Disable Bad Name Cache" and "Disable Bad Address Cache".
Where/ how can we set these options for zcm 10.3 agents?
thx,
hugo

Those are Novell Client settings not ZCM Client settings.
On 4/4/2012 1:16 PM, susehoush wrote:
> "Disable Bad Name Cache" and
> "Disable Bad Address Cache".
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

How Can i specify multiple server names in rwservlet.properties file?

How Can i specify multiple server names in rwservlet.properties file without clustering?
I am using oracle 10g Application server. we have 3 servers Repsvr1, RepSvr2 and RepSvr3. Now i need to configure rwservlet.properties file to point to these servers based on any running report. i got 3 keymap files with reports info.
Sample entry in the key map file is:
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
rwservlet.properties file letting me to enter only one servername. Even though i merged all 3 keymap files into 1, still i have the server name issue. If i leave the server to the default name still i am getting the below error.
REP-51002: Bind to Reports Server Repsvr1 failed. However, i know the default rep_<servername> would be used incase we dont have SERVER=<value> parameter in the rwservlet.properties file.
If i specify the servername in the rwservlet.properties file then only Repsvr1 reports are working fine and other 2 server reports are giving the same error like
REP-51002: Bind to Reports Server <<Server Name>> failed.
how can i configure the info which will work all 3 reports. 2 Port servers are invoking using oracle forms and report server is invoking using ASP pages.
If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error, whenever i am trying to integrate all 3 to workable i am getting binding error. if i exclude the server from rwservlet.properties still i am getting the same error.

My RELOAD_KEYMAP setting is YES only.As i said If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error.
keymap file entries
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
If i use http://server.domain:port/reports/rwservlet? cmdkey = key1 should bring the report from Repsvr1 and http://server.domain:port/reports/rwservlet? cmdkey = key2 should bring the report from Repsvr2, but i am getting an error from Repsvr2 saying that REP-51002: Bind to Reports Server repsvr2 failed.
Only Servername Repsvr1 is in rwservlet.properties file. Now what is the best option to by pass the server from rwservlet.properties file and should be from keymap file. if i comment server name in rwservlet.properties file still i am getting REP-51002: Bind to Reports Server <<Server Name>> failed error for both keys.

Unable to retrieve clouds on VMM server. Please make sure the server name is correct and try connecting again

I getting this annoying error "Unable to retrieve clouds on VMM server. Please make sure the server name is correct and try connecting again." I've followed the recommended documentation for setting up SPF and Azure using the following:
http://www.hyper-v.nu/archives/mvaneijk/2013/01/installing-and-configuring-system-center-service-provider-foundation/
I've gone thru the troubleshoot steps from the following:
http://blogs.technet.com/b/scvmm/archive/2014/03/04/kb-the-windows-azure-pack-service-management-portal-does-not-retrieve-cloud-settings.aspx
http://social.technet.microsoft.com/forums/windowsazure/en-US/363e7dae-7370-4605-bc8d-b98fa6dc9d8e/unable-to-register-vmm-server
So you don't need to send me those links.
I found a few others which pointed me to the event logs WindowsAzurePack\MGmtSVC-AdminAPi and AdminSite. In these event logs, I see a lot of event ID 12 and 1046. The contents of event id 12 is the following:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:27:55 PM
Event ID: 12
Task Category: (65522)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Error:ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception>, operationName:SystemCenterAdmin.GetAutomationResourceProvider, version:, accept language:en-US, subscription Id:, client request Id:dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z, principal Id:USWIRED\Administrator, page request
Id:c343c29d-20b1-412b-be94-879409205700, server request id:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>12</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65522</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:27:55.971935000Z" />
<EventRecordID>399</EventRecordID>
<Correlation ActivityID="{FAA512AF-E0A9-4F2A-80EF-09F72D2F7918}" />
<Execution ProcessID="3424" ThreadID="2308" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="message">ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception></Data>
<Data Name="requestId">
</Data>
<Data Name="subscriptionId">
</Data>
<Data Name="clientRequestId">dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z</Data>
<Data Name="principalId">USWIRED\Administrator</Data>
<Data Name="version">
</Data>
<Data Name="pageRequestId">c343c29d-20b1-412b-be94-879409205700</Data>
<Data Name="acceptLanguage">en-US</Data>
<Data Name="operationName">SystemCenterAdmin.GetAutomationResourceProvider</Data>
</EventData>
</Event>
Event ID 1046 is
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:32:56 PM
Event ID: 1046
Task Category: (116)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Could not connect to Resource Provider. Error: Resource not found.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>1046</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>116</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:32:56.854137500Z" />
<EventRecordID>413</EventRecordID>
<Correlation ActivityID="{C20DBEAD-388F-4CF4-80FD-21C6419CC2F1}" />
<Execution ProcessID="3424" ThreadID="2768" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="errorMessage">Resource not found.</Data>
</EventData>
</Event>
The other thing I notice is that when trying to connect to the VMM. It's trying to use domain\username, yet when I try logging in with domain\username via the SCVMM Console. I get the You cannot access VMM management server (Error ID: 1604).
I'm not sure if this is why I can not add the VMM to WAP. Any help would be appreciated. Thanks
Nick

Hello,
I am not sure about the answer but I guess these steps will solve your problem:
1) Log in to the SPF server by using an account that is a member of the SPF_Admin local group.
2) Open an elevated Windows PowerShell window.
3) Type the following commands, and press Enter after you type each command:
Import-module spfadmin
New-SCSPFTenant -Name Administrator -SubscriptionId 00000000-0000-0000-0000-000000000000
4) Close the WAP Server Management Portal, and then reconnect to it to update all items.

Can We rename BAD File name in SQL Loader

Hi All,
Can we rename BAD File name in SQL loader?
If yes, how?
Thanks in Advance,
S

Hi,
You can rename the bad file before running SQL*Loader, or specify the name of the bad file using the BADFILE clause followed by a filename. If you do not specify a name for the bad file, the name defaults to the name of the datafile with an extension or file type of .bad
Specifying the Bad File
http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/ldr_control_file.htm#i1005085
Regards,
Hussein

Hiding the Port in a Virtual Host/Server-name Alias

I need some guidance/help with the HTTP Server in AS 10g. We have several new Portal sites with a mix of forms, reports, and pl/sql server pages. We wish to make these services available from the internet via an aliased hole in the firewall.
We have our public alias of Alias.CompanyWebsite.com mapped to the server-name, but we'd like to get the alias mapped to servername:port. I've tried to get this set up using virtual hosts in the HTTP server, but I'm having no luck. I'm also having trouble finding documentation on how to this.
Is there a way to hide the server-name and port number via a virtual host (alias) in HTTP Server and/or Web Cache? If so, how do you accomplish this?
Thanks,
Josh

Usually it is like this:
outside name: www.acme.com
oudside port: 80
inside name: inside.acme.local
inside port: 7778 (if you have a seperate machine for the middle tier)
In the Webcache you'll need a site
www.acme.com with port 80
and an origin server
inside.acme.local with port 7778
Then create a site-to-server mapping from www.acme.com to inside.acme.local
If your firewall listens to another name or does something with the ports you need to change the site accordingly.
cu
Andreas

Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

Hello,
Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
Unknown Host
Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
Can anyone help me please, and the same website is accessible with my phone.
Help me please. :(
Regards
-

Try http://www.transitbux.com/
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Please help ! "Oracle Reports Server CGI - Reports Server name is not specified."

Hello Gurus,
I have an html form that allows putting in a parameter. Upon
submit the form, it'll pass a string URL with the parameter to a
new browser.
My url: http://localhost/servlet/oracle.reports.rwcgi.RWServlet?
diary&14252
I also used keymap looks like this
diary: report=Diary.rdf server=servername desformat=pdf
destype=cache userid=id/psswd@db myoid=%1 %*
But I get an Error: The requested URL was not found, or cannot
be served at this time. Oracle Reports Server CGI - Reports
Server name is not specified.
However, if I move the cursor to the end of the same url (or put
a space at the end) and hit Enter, then the report is
displayed. I guess there must be something wrong with my
configuration. Please help. I appreciated any inputs from you.
Thanks in advance.
Ashley

I found the solution to my problem. It was nothing to do with
the cgicmd.dat keymap file, but the html form itself. It's
confused between the url arguments and form arguments from the
submit button. So, what I did was open a new window with all
arguments instead of using the submit function.
Regards,
Ashley

A very simple question: how to obtain the mail server name?

In our JSP application, at one point an email will be sent to notify one event. Currently, that is done by using the html tag: mailto. To have more control on the email in tems of context format (a bad layout right now) and others. I would like to have it processed at servlet by using the JavaMail API, so that it have a nice format and have the sender's email address right in case email client is not installed in the machine where the browser in. The JavaMail API is straight forward. The question is how to obtain the mail server name, and the sender's email address if there is one?
Thanks.
v.

How to obtain the mail server's name? It's your server, you should know its name. Or if it isn't your server, you should ask the administrator for its name. Point is, you need to decide in advance what server you are going to use and hard-code its name into the program or into a properties file.
And how to obtain the client's e-mail address? You have to ask the client, probably by putting a box in the HTML and asking them to type it.

5 second delay when using server name instead of ip in JNLP codebase??

Hello,
can anyone think of why, in my jnlp file when I have codebase="http://www.mysite/..." my rmi app has an additional delay of 5 seconds when making RMI calls? If I replace www.mysite with 64.29.187.xxx (i.e the ip used to access the server form the internet) my app runs flawlessly, no 5 second delay.
I am using java 6.0.
Any ideas? Thanks in advance.
SC

Thanks for the tip Khumar... A few more questions:
1) Why is it still using the DNS after it's loaded the jnlp. To access my RMI server I'm already using an IP address. In other words, this should resolve during the jnlp loading time. Why is it interfering with normal operations after the app is up?
2) All the jars have already been loaded. There should be no further need to access a DNS, as there's nothing further to resolve
3) Is there a way to cache the IP addy that the server name translates to?
Thanks in advance,
Sal C

Bad server response

I have Safari 1.3. I used to never have any problems with Safari. Then, i started having sites that i can't open. I get an error message that says "Safari can't open this page. Bad server response." At first it was just an occasional site. Now, i encounter them fairly often. For example I can't use wikipedia, I can't use Photobucket. I can't open purevolume.com. The pages open fine in Netscape.
Safari doesn't have this problem on my iBook--just the Powerbook.
Does anyone know what is causing this? It started before I updated to OX 10.3.9. Is there any way of fixing this?
thanks

thanks for the suggestion. However, this has been going on for months. I clear the cache several times a day because i was a victim of identity theft where someone got information from my computer somehow, i don't know how, but at the time i didn't have a firewall or ecryption or anything. Now i have all that stuff but since then, i empty the cache frequently as a security measure.
I also manually threw away the safari cache and icons. apparently clearing the cache doesn't get rid of those. I threw away my safari prefs. i reinstalled 10.3.9 and java, repaired permissions repeatedly.
I don't have a clue what's wrong, what it is about these particular pages that safari can't open on this computer. For a long time, it was just one or two sites where it happened. Now, it's happening much more, since i installed 10.3.9. I don't know if there's any relationship to that. I also installed 10.3.9 on the iBook and Safari doesn't have this issue on the iBook.
I wonder what these pages have in common.
I have Safari Enhancer on the powerbook and not on the iBook. I wonder if it could cause this problem.

Unable to resolver server name

when I open a terminal window and type ping followed by existing server name it says "cannot resolve reference: unknown host"
if I do the same thing on a PC it all works!
Why can't a MAC find other computers connected on the same network
It such a basic thing, It almost make the imposable to us a mac. One way other people use to get around this problem is to run windows on a mac instead, But I don't understand why.

Check out this link - http://discussions.apple.com/thread.jspa?threadID=2496619&tstart=15
It might assist in isolating/troubleshooting the issue. Can you ping via Network Utility? Did you try and DNS cache flush?

Bad Server Name Cache

Similar Messages

Maybe you are looking for