Bad sound in Bluetooth Headsets when input is Bluetooth

I have three different Bluetooth Headsets:
Plantronics Voyager Legend
Plantronics M155
Jawbone Era
And have same problem.
When I set Audio Input to Bluetooth Headset then output sound became very bad quality.
I discovered problem!
Look this screenshot.
I can't select 44100 Hz and 2ch-32bit!!
Why? I can select Format: 44100 Hz 2ch-32 bit only with Internal Microphone.
I tried my Headsets with Macbook Air and Macbook Pro - problem present in both notebooks

Similar Messages

No sound fro Jabra BT530 when connected to a call

I just purchased a Jabra BT530 and I connected it to my iPhone 3G (latest software update). I CAN hear sounds from the headset when I dial a number, adjust the volume and power on/off and I can even hear music when I play iTunes. I CANNOT, however, hear sounds when I connect to a call. The person on the other end can hear me through the headset, but I can't hear them (so the mic is working, but the earpiece doesn't seem to be working in "call mode"). I played around with the volume and speaker settings and disconnected and reconnected the headset with no luck. I just thought I'd check these discussion to see if anyone had a similar problem and resolved it before I return the headset. Any ideas/suggestions?
Thanks in advance.

I am currently using the same headset and have not faced this issue, apart from the other one [described it this thread|http://discussions.apple.com/thread.jspa?threadID=1804116&tstart=0]. I would suggest you erased your headset from the iphone through Settings>General>Bluetooth and pair it again.

Flash player is getting output sound into BT headset only.

I made some tests using my bluetooth headset. I went to System preferences and changed on sounds, the output to the headset, then i took it back to internal audio device and so, the flash player now is getting no sound output from the internal audio, i just get sounds for the headset, when i watch some movie on youtube i need to use the headset to listening and when i use other programs, iTunes, QT, etc, the sound goes right to external output. On System preferences the output is to the normal audio device, not the bluetooth.
What can i do to correct this?

Up, isn't there anything i can do? Could Mac restore the configuration like Windows restore does?

Nokia 3110C bluetooth headset trouble (bad sound)

I just updated my phone from software version 5.50 to 6.60 to solve the echo problem that occasionally occurred.
Ok the first problem seems to be solved but now I noticed that the outgoing sound from my headset ( I tried 2 different headsets ) is distorted. I made a comparison with my old 6021 and it is a huge difference. The 6021 sounds much better then the 3110C with the headsets. It looks like the 3110C is gaining the signal to much.
Are there more users who experience this problem?
Message Edited by nico_be on 14-Aug-2008 02:05 PM

I think it is a symptom of the information and knowledge at the user level with Bluetooth.
Not something which the user can be responsible for but the only Bluetooth documentation I have found is highly technical documents and lengthy specification and agreements.
The device documentation is as usual lamentably small and gives no information above basic.
In this particular question I found, because of lack of clear info, I was using the Headset service and should have used the AV service which gave a much improved quality.
Thanks
Nigel

I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

Ask the headset manufacturer.
Barry

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

IPhone 5S sounds do not function when on Bluetooth or when plugged in

iPhone 5S 32GB version 8.1.3
sounds do not function when on Bluetooth or when plugged in

8.1.x to 8.1.3
I will try tonight and see.

On my iPhone 4 the sound is all scratchy when listening through earbuds or dock. Its any sound, music, utube videos. If I play it through the iPhone speaker or from bluetooth it sounds fine. It just started about 3 weeks ago. Any suggestions?

In the last three weeks my iPhone 4 (OS 5.1.1) the sound became all scratchy when listening through the ear buds of if I dock it. The sound is fine listening to it from the iPhone speakers or in my car through bluetooth. Please remember its all sound. Whether its music, utube or a phone call. Any suggestions?

Mini Man, I'm glad to read you found a solution to your issue, but I don't know if your solution is going to be mine as well.
For starters, I do not have the new Apple TV - at least, not yet. I have ordered one, but it will not be delivered until some time next week (sneering glance at Steve & Co. for abandoning that platform rather than making it AirPlay compatible).
But that is not really my issue: my issue is that my two Airport Express units do NOT show up in the iPhone, though the DO show up on my iPad. This tells me they have been properly configured (both units have names, and are connected to the house network), so there must still be something missing from the equation.
And, judging from the response of a few others who have chimed in here, I think it's save to say that the experience is not altogether uncommon.
I'm surprised nobody has come back with a more direct solution to the common issue. I may have to call AppleCare someday this week...
--PS

Bad sound when watching movies etc..

Hi,
I bought an Mini DisplayPort to HDMI Adapter Cable @ ebay a while back, and recently Ive started using it with my macbook air (running OS X Mountain Lion)
I have this hooked up to my receiver and the image quality is superb, but the sound is not that great..
I often use to watch movies (.mkv files) and all movies have very poor sound quality. Even when its DTS-HD Master Audio 7.1..
Have someone experienced something like this?

Anyone ???? I doubt I am the only one who have had this problem..

VERY BAD SOUND: MacBook Pro (unibody) with external JBL Creature speakers

Recently I've bought myself a brand new Mac Book Pro. I'm very happy with my new laptop, but I can't say that about the audio-output quality my new MacBook Pro delivers in combination with my existing external JBL Creature speaker set. In the recent past this speaker set was attached to my old iMac 17" flat, which delivered supreme music quality, but now in combination with my by far more superiour new MacBook Pro, the music sounds very disturbed with a background noise and it seems that the speakers do get to much power/signal - but still the music sounds very far away and the more I pump the volume the worse gets the music output (i.e. more noise is coming out of the speaker) and the right channel seems to have less power (or output). Now I've disconnected my JBL Creature speakers set as from time to time also static ticks are loudly to be heard when just connected whilst I don't do anything with my MacBook Pro.
Can anyone tell me whether this is a problem of the audio-design of the new MacBook Pro (aluminium unibody) and if so is there a solution for to by-pass or overcome this very annoying problem.
Many thanks in advance for your support!

It is true that the audio quality is a total crap, the audio card seems to be "Realtek" and yes it is ****, I am really ****** cause it is not a cheap computer and I have always used mac too and I am really disapointed. I just can't believe that Apple has passed by the audio quality that is so carefully observed in the ipod products. I have been blessed (no, it is really a curse) with a very sensitive unhuman high frequency hearing and my ears really hurt when I use the earphones with the Macbook notPro and I use it at low volume. You can even hear when the sound system goes off when no sound is played for a little while and the when a sound is played goes on and the noise begins. Also you can hear strange whistles and sissings wich are not continuous but the main amp noise is there. This kind of noise is produced by bad quality, low eficiency amplifiers or other factors I do not know. But I have tested several realtek integrated cards and the all are pure crap or less than crap.
Ok bye, bye.

Problem with content: 7 - Bad sound Data

When I do the following...
Voice = new Sound();
Voice.loadSound("test.mp3", true)
I get the error...
Problem with content: 7 - Bad sound Data
AND
Problem with content: 7 - The sound data format is not
recognized.
I am using the test.mp3 files that comes with Flash8.
Thanks!
Bob

OK. This combo works!
version flash Player 8
action script 2.0
Audio Stream: MP3, 128 kbps, Stereo best
Audio event: MP3, 128 kbps, Stereo best
Override sound settings (unchecked)
But this combo does not!!
version flash lite 2.0
action script 2.0
Audio Stream: MP3, 128 kbps, Stereo best
Audio event: MP3, 128 kbps, Stereo best
Override sound settings (unchecked)
Still get the error on all Nokias except Nokia 90 which gets
no error but just does not play the file

Bad sound in my x-fi audio after windows upd

I have accidentally downloaded this @ windows update on tuesday?
Creative - Sound - Creative X-Fi Audio Processor (WDM)Creative Sound sofware update released in June, 2007?
After that all my sound options were gone and i have a terrible bad sound.
Is there anyone who can help me to solve is this problem?
I am running win xp

If you need to remove entries from the registry it's not as bad as some people make it to be. You do have to be very careful because it can disable your system. First go to the Device Manager and uninstall your sound card. Go to Start Menu and click on RUN, enter "regedit" and hit OK. Click on the + tabs by My Computer then HKEY_LOCAL_MACHINE.
Make?a backup copy?by going to the FILE tab at the top and select the Export option. Name the file HKEY_LOCAL_MACHINE and save?it to your desktop. You can use this file to restore your registry to?it's original state?if needed.
Now click SYSTEM and then CurrentControlSet then click on and highlight Services. Go back to the top?and under the Edit tab select Find. Enter "Creative" in the box and then click on the Find Next tab. This will find any reference to the word Creative. Any time you find a reference delete the folder that the reference exists in. Go back up to the Edit tab after each time you delete a folder and click the Find Next tab and it will search for the next reference. Do this until you find all references in the Services folder. This should remove all the drivers for your Creative sound card but will also remove any drivers for ALL Creative products on your computer. If you only have the sound card this won't be a problem. Close the Registry Editor and restart you computer. You should be able to reinstall your card with the original CD or the driver of your choice. If you don't use the CD you'll have to tell Windows where to find the drivers. Restart your system a couple of times to make sure all your services load and it runs as it should. When your satisfied that all is Ok you can delete the file you saved to your desktop. ?Just be very careful what you delete and you will be OK. If this doesn't work you may have to format the hard dri've and start from scratch. Good luck.

No/Bad sound with Win7 RC (64bit); X-fi Extreme Music.

Hi!
I got a hold of the Windows 7 RC (x64) Build 700?and since then have tried many different drivers (both beta and stable and even daniel's support packs)?with no result. At first when i reboot my computer i get a pretty bad sound at startup when i play a mp3 song or open a video, the sound dissapears totally after 3-4 seconds?(and the video starts lagging without any sound). Got a HP nforce 430 motherboard with the X-fi Extreme?music card with 4gig ram. Anyone mind helping me that have got things to work out with the same setup?
[email protected]

Creative Sound Blaster X-Fi Series Beta Driver 2.8.003
Claim to be win7 Beta drivers:
"Requirements:
Microsoft Windows 7 Beta
Creative Sound Blaster X-Fi?series audio devices listed above"
But they obviously dont seem to work for the RC version specially not the 64bits version sadly Ive tried Vista drivers as well dont work out for me.

Can't get any sound from my headpeice when plugged

Hi there,
Could someone help me out with this? I am unable to get any sound from my headpeice when I plug it in to listen to music. The sound only comes from the phone's speaker. I have reboot the phone but the problem still persist.
Thank you

are you using the N900 headset? or a different one?
(Check your headset conditon using another phone or something)
*aslo try this;
after plugged in, rotate your headphone jack slowly..
**this could happen coz of a app youve installed. So remove apps like headphone demon and apps newly installed.
***i got kinda same prob when i bought ma N900 in 2009. But after PR1.2, its gone..
So check your firmware version and update it...
"You may loose faith on us.. But never in your selves! From here, the fight will be your own.."
_____________[Protect Transformers]_____________

Bad sound in Bluetooth Headsets when input is Bluetooth

Similar Messages

Maybe you are looking for