Bad sound when recording presentation in keynote with animation

When recording audio for a presentation, in a slide with some animated objects the recorded voice explaining the slide sounds crasping or double with lot of noise while the animation is taken place, after the animation the recording it's ok again.

I have it set to 44.1kHz and "4ch-24bit". The only other option for the bit depth is "encoded digital audio".

Similar Messages

No sound when recording videos with iphone 4s - ios7

Since I have downloaded ios7 to my iphone 4s I am no longer getting any sounds when recording videos. When looking back at past videos I have recorded, they still have sound in the playback. I have tried resetting my phone and reseting it to factory settings. Any recommendations?

Hey Bryan3939!
If I'm reading this correctly, it sounds like you might be experiencing an issue with your microphone recording during videos. I have an article for you that can help you troubleshoot this issue:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Can you use midi sounds when recording videos on Photobooth?

Can you use midi sounds when recording videos on Photobooth?
Basically, i like to record videos of me singing and playing guitar or keyboard, but to get a good sound for the keyboard I'd like to be able to record the audio using MIDI sounds...
Ive got Logic, I've got M-Audio Fast Track Pro, into which i have my mic, guitar, and keyboard midi plaugged into. I can use it to record the mic and guitar on photobooth as they are audio inputs, however i can't use the midi sounds on the keyboard :/ I have tried having logic open with the desired MIDI sound selected whilst recording but it doesnt work...
Is there ANY way this is possible?
HELP PLEASE!
Thanks!

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

TS3376 The microphone on my i-pad mini does not seem to hear/pick-up any sounds when recording videos, facetime etc. Has anyone else had this problem?

The micro phone on my i-pad mini seems to have stopped working. The unit has never been rough housed and is always kept in a safe environment....we can hear everything fine, but no one can hear us and it does not pick up any sounds when recording video. Any suggestions on how to fix it?

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

Popping/clicking sound when recording in garageband 09

How do you take off the clicking/popping sound when recording in garageband 09

WOW THANK YOU YOUR THE BEST THANK YOU SOO MUCH :):):):)

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

No sound when recording videos iphone4

Hello,
When i record videos with my Iphone 4 there is no sound when i read them and, when i try to use the speaker during calls my correspondants don't hear me.
Any clue about this ?
Thanks

Hello Kboum,
It sounds like the microphone on your phone is not functioning correctly in either the Camera app or the Phone app. I recommend the troubleshooting for it in the article named:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
Make sure none of the microphones is obstructed by dirt or debris.
Turn the iPhone off and then on.
Make sure that the latest version of iOS is installed.
If necessary, find general iPhone hardware troubleshooting suggestions.
For further assistance, contact Apple Support.
Thank you for using Apple Support Communities.
Take care,
Sterling

Gaps in sound when recording

Hi 'all',
I have gaps in the sound when I record with Audition.
I dit chance the audio hardware took a new Harddisk and put a new system on it (XP) The only software on it is Audition 3.0 and CD Architect. Chanced the DMA from 6 to 5. Still the Gaps,...?! Nou I'm lost.
Hope there is someone to help.
Friendly greetings,
Cees

There was a new driver, there was a new driver. I didn't verify a rumour. So stupid of me. I installed the new driver and it works again! Your remark about the driver made me think, so I investigated this driver issue and solved the problem, thanks to your remark ofcourse. How drivers are a sensibility-issue in the computer world. My tape machines luckily don't need no stinkin' drivers.
Thanks again!
Greetings,
Cees

Saffire clicking sound when recording

I am having a problem with my Saffire. I just got it in today.
I set it up, connected my mic, played around with it to learn the controls, etc. So I load Logic Pro 7.2, and I record on track 1. I then listened to the track playback in my headphones connected to the Saffire. So no problems recording on track 1.
Having only one mic connected to my saffire, I go to track 2, and set it for input 1. I start to record track 2, and I hear a clicking sound. The audio is recorded to track 2, but the entire time recording, I hear this click sound that wasn't there when I was recording track 1.
I thought I maybe did something wrong, so I started a new song. Recorded on track 1 with no problems. Then went to record track 2, I hear the clicking sound during the recording. Playing back both tracks recorded, there is no clicking sound.
Anyone know why this is so? I'm using a MacBook 2.0GHz Core Duo, 2GB ram, recording on the internal drive. I downloaed the universal binary versions of the plugins and software for the saffire, and have the latest firmware. Running the latest version of Mac OS.
Also, when I'm in the saffire control app, I can't choose Preferences from the menu. It's grayed out. Is this normal?
Thanks,
Bryan

It's rythmic clickin.. sounds like a metronome, but I don't have one playing. I even deleted the click track. Also, I created a new song.. and I hear the clicking even recording the first track if I have the playback in my headphones. So if I have my Saffire control panel set to TRACK, I hear the clicking when I'm recording to Logic.
I didn't change the I/O buffer size, I'll have to check to see what it's on.
Bryan

Apogee Duet/ Logic 8 - Lose Right Channel Sound When Recording

Hi all. Using Logic Pro 8.0 on an Intel iMac, OS 10.11, with 2 Seagate Ext. FW Drives with an Apogee Duet.
Here's the problem that's recently developed and reoccurring more frequently when recording into Logic:
I plug guitar or a mic into channel 1 of the Duet ( have double checked everything connection-wise - all good)
I hear the signal from the input in both ears... everything fine so far.
I record or rehearse and all is well.
I stop the playback and then I only hear/monitor my current instrument or mic in one ear (usually the left - the right channel disappears. This has nothing to do with the headphone or speaker connections as all pre-recorded tracks are still coming out in stereo (both ears).
Sometimes if I just press play and stop, the missing side will reappear, but not always.
If I was just recording into channel 1 of the Duet and I encounter the problem, I physically unplug the source and put it into channel 2 and re-arm the input and/or the record and then I have 2 sides again... strange.
As well, when I use a Logic session template under this same setup, I can hear my guitar in both ears , but the moment I mute an effect in the channel strip I'm playing through... boom.... one ear/side is gone. I can only get it back by unmuting the effect or going through the above mentioned unplugging routine.
To sum up, I should be able to simply monitor my guitar or mic input in both ears (stereo) without it disappearing randomly. I know a guitar/mic is mono but you should be able to have it coming out both sides. It always worked until the Duet started acting up.
Lately, I also have been hearing strange artifacts and phasing when monitoring a LIVE source back through the Duet... this is intermittent but becoming more frequent. Previously recorded tracks are sounding ok.
Any tips or similar experiences? I'll give Apogee a buzz and see what they can offer.
Thanks all.
Dave

Hi,
Thanks for offering your tip... much appreciated. When setting Mono versus Stereo, are you referring to the little "circle" icons at the bottom of the channel strip, next to the "I" (input monitoring)?
I did have it set to mono, with a single meter in the mixer window channel strip and still had the right channel disappearing suddenly problem. Speaking of the mono/stereo circle icons, why is it that some channel strips show these icons but others don't? I have two guitar tracks that both play back fine, but one allows access to the mono/stereo select icon but the other doesn't display it. They're both identical in every other way.
My feeling is that this could be a Duet problem because of the thin phasey ring modulation sound and level changes that will appear suddenly while monitoring a clean input source moments after everything was just fine.
Maybe this is because I'm still on 8.0 and Tiger? I'm in the middle of a project and can't risk update problems right now. What do think about the latest Logic with Leopard....safe to do and still have access to previous Logic 8.0 session files?
Thanks for your kind advice!
Cheers,
Dave

No sound when recording videos 4S

Just got my 4S today and have found that every time I record a video it doesn't record the sound. There is a sound on playback, like a crackling or like a old projector noise. Has anyone else had this?
I can use Siri, I can play youtube videos back but I just can't get sounds to record with my video.

I rung apple and they are sending me out a replacement. I must say I was very impressed with the customer service. I was on the phone for less than five minutes (would have been quicker if I could remember my phone number!) and I received an email saying they will be sending me the replacement quicker than they told me on the phone.

No sound when playing DVDs, yet fine with bluray

my sony bluray does not have sound when playing dvds. it acts fine when using blu ray. any suggestions?

Hello jc1942_69, thank you for your message. Welcome to SONY Community!
For further assistance, please let us know with the model number of your Blu-ray disc player. As alternative, you can check the link below: http://esupport.sony.com/US/p/support-info.pl?info_id=264
However, to troubleshoot your Blu-ray disc player in a general way. Follow the steps below:
1. Turn the Blu-ray Disc player on and make sure the correct video input is selected on the TV.
2. Press the Home button on the Blu-ray Disc player remote.
3. Once the menu is displayed, press the Left arrow button on the remote and navigate to Setup.
4. On Setup, use the Down arrow button and go to Resetting and press the Enter button.
5. Under Resetting, select either Reset to Factory Default Settings or Initialize Personal Information.
NOTES:
Reset to Factory Default Settings option will display another menu where you can reset the current network, audio and video settings on the player, select All Settings if you desire to restore everything.
Initialize Personal Information will erase all personal information stored on the player and some Internet apps.
6. Go through each of the two options if you desire to completely restore the Blu-ray Disc player.
Hopefully this post helps you!

Hizzing / bad sound when running from battery power (Ups)?:

Why is my computer (Imac) emitting a hizzing sound when running from the UPS (battery)? I am testing a offline UPS type: POWERWARE Eaton Protection Station UPS 500VA 250W. My Imac is suppose to use max 200 watts of electrity (Imac 24 inch. intel 2.8 Ghz, 4 GB memory). When running from AC there is no sound. When testing (pulling out the cord on the UPS the Imac starts emitting a disturbing hizz / sound)???

I solved it my self. It was OK (no buzz and fuzz) when it was plugged in (when the electicity line was down once and I was running on the UPS battery).....

Problem Recording Sound when Recording Video with iSight

I am trying to make a short movie using iMovie '08 (ver. 7.1.4) with my built-in iSight camera and built-in mic on my iMac (2.16 GHz Intel Core 2 Duo). I want to post this short movie in my MobileMe gallery.
I am able to record and view the video (event) using the iSight camera. However, I cannot get the movie (as I record the video) to pick up any sound.
The mic appears to be working okay: when I click on the microphone icon in iMovie, a "VOICEOVER" window appears. In this window, the "Record From" box shows "Built-in Microphone" selected and the Left/Right bars below shows green increasing/decreasing as I speak.
Nevertheless, I cannot get iMovie to record any sound. Obviously, I am missing some setting or process. Would someone kindly give me a little direction here? Thank you, Dale

The mic wasn't selected in the System Preferences. In the Sound pane, the "Line In" had been selected. Instead, the "Internal microphone" should have been selected. When I made this change, the mic worked fine. Dale

My new iphone 4 does not have any sound when recording a video with the camera app. Does anyone know how to fix this?

I just got a new white iphone 4. When I try to take a video using the camera app, there is only a muffled sound. I never had this problem with my old iphone. I tried to restore it and that didn't help. I checked over all of the settings. Does anyone know how to fix this?? Thanks for any help you can offer!

There is a good possibility that your trimming of the SIM card could have damaged it some way. If the SIM was working in the old phone, then you cut it and the first new phone didn't work and now this phone doesn't work, it leads me to believe it has to do with the SIM card or the account. You are sure there is no problem with the account. Did you check with the provider when you got the iPhone 4 to make sure there was no problem with the account when you could not send or receive SMS? Why can't you just get a micro-sim? The iPhone should have come with one when you purchased it.The iPhone 4 is designed for a micro-sim. I don't believe this is a hardware problem unless the phone has been hacked or modified in some manner.

Bad sound when recording presentation in keynote with animation

Similar Messages

Maybe you are looking for