Bad to great

Bought a Thinkpad Yoga S series. Sure wasn't expecting the headaches I got though.
Out of the box, the wifi wasn't working properly and the power adapter wasn't charging properly, at least not when you needed it to. Go to web site to look for updated drivers. Had to get them downloaded via another computer and transferring to a thumb drive. After updating, the laptop was still the same. So, I updated Windows, still no fixes. This laptop was basically useless to me if I can't get online or keep it charged up
Well, I was considering returning it, but had a hunch that the problems were software related (Lenovo's bloatware).
Well, since I had originally planned to swap to the 1TB SSD Samsung 850 Pro anyway for double the storage and blazing read/write speed, I decided that, instead of cloning the image to the SSD knowing I'd still have all the same problems, I decided to do a clean install with an OEM copy of Windows 8. Before I did, I made sure I had all the drivers I would need downloaded to a thumb drive, along with a boot recovery in case I had any issues. Once I had that, I removed the bottom cover and pulled the 500GB WD spin drive and put in the SSD. Plugged in an external cd drive with the Windows disk in it. Turned on the laptop and the installation began. I anticipated problems but had none. Windows was even already activated when it finished, so it found the embedded key on its own. The wifi was still not working right, but the power adapter was. I had already gotten the drivers for the wifi/bluetooth and had them on the thumb drive. Not Lenovo's version of the driver but Intel's version that I got from their web site. Now it works great. Had to update some of the drivers from Lenovo, like for the touchpad and chipset, etc...In device manager, all things are working properly. The laptop is now awesome and works great. I have no issues so far. Lenovo can keep all their bloatware for themselves. What they put on the laptops are probably supposed to be helpful for us, in their minds, but its exactly the opposite, at least in the case of this Thinkpad. The design of the laptop itself is great and main reason I wanted it...needed one that was rugged and could handle the abuses of being on the road all the time.
So, it was a little trouble getting there, but I now have a great laptop that should last me a long time.

Actually that's not true - -
I just got off the phone with AT&T and you have 30 days to return it - so, I could go there, return the phone, (pay 20 dollars (restocking fee) then buy a new one.....
I love my phone but want the GPS to work and am a bit concerned though about the reading of the problems perhaps being with infineon chipset - although it didn't give me any problems BEFORE the update (2.0.1) so am sure that 2.1 would fix it, however, I would hate for it to NOT fix the problem and then be out of luck after 30 days.
Anyway, I don't know what the RECEIPT says and why APPLE says 14 days when its not on the receipt yet AT&T says its a 30 day RETURN policy so you could get another phone at the subsizide price....
Wondering if I should just return it, then buy it again so I would have another 30 days vs just a few weeks in order to see what happens with newer updates.
Peace.
Tamara wrote:
The iPhone 3G comes with a one year warranty against manufacturer defects.
You would make an appointment - http://www.apple.com/retail/geniusbar/ - at the Genius Bar. Once you get there, you politely explain the issue and the Genius will either show you how to correct it or replace the unit. It is their discretion as to whether you get a new unit.

Similar Messages

  • Photomerge not working cc2014 . Aligning works but blending really bad. works great in cc

    Photomerge not working cc2014 . Aligning works but blending really bad. works great in cc

    It's a known problem with the pixel selection logic that also affects focus stacking.  It has been acknowledged by Adobe, and they've said they're working on it.
    See also:  Re: Since installing the latest update of Photoshop CC two days ago, Auto Blend for focus stacking is selecting all pixels from the bottom layer instead of selecting the ones in best focus from each layer. Has anyone else seen this problem?
    -Noel

  • BT bad start, great finish

    Afternoon all.
    If you don't want to read it all skip to the bottom.
    I've been reading the forums for a long time, waiting for Infinity to arrive in my area, and had been growing concerned about the BT service and support.... They didn't get of to the best start. 
    After being lied to by Sky about being able together Fibre from them (Long story) , I cancelled my less that 1 month old contract with them and placed an order with BT straight away for a phone line and infinity.
    Order placed was told an engineer would come visit in just under two weeks. April 30th to be exact, between 8-1pm.
    The time slot came and went no engineer.
    Phoned BT. Got put through to a call centre where my first language wasn't the same as theirs, after being told off for coming through to the wrong department and then passed along to two more incorrect departments. I was quite literally dropped to a third department without any word of warning.
    This 3rd department the first with actual knowledge and no language barrier was where BT started improving. They managed to get hold of the engineers and was told they had no record of the job hence no visit. Made numerous calls and managed to track down the job and assign it to an engineer as an Emergent visit or someother term.
    3pm the engineer turns up for what we both think is going to be an easy job.
    Long story short 2 hours later well past when his shift is finished, he has put right the botch job the last BTengineer did to my phone wires (Which the 1st engineer did to fix the bad jobs the builders did apparently) and I have a working BT line and Infinity at speeds well above the estimate and more importantly above the 1.4mb I was lucky to reach before.
    I forget the lady on the phones name who tracked down the job and assigned it to an engineers (Sam I think it was), and I also forget the engineers name. But If there is anyway to track them down, I would really like to say a big thanks to them.  They turned what I thought was going to be another nightmare like Sky in to a good result.
    Rob 

    Always good to read a positive outcome
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Badi ME_PROCESS_REQ_CUST Sample Code required for changing the values

    Dear Friends,
    I am new to the Badi technology. We would like to populate/change the standard field values, (Purchasing group) during Purchase Requisition creation/change.
    Method --> PROCESS_ITEM.
    I tried the following code, but system blnaks out all the field values entered during PR creation.
    Appreciate, if you could provide me some sample code which can be of help.
    Reg
    Kumar
    Sample code----
    METHOD if_ex_me_process_req_cust~process_item .
    DATA: k_mereqitem          TYPE mereq_item,
            om_data              type mereq_item,
            om_datax             type mereq_itemx,
        k_mereqitem = im_item->get_data( ).
        check im_count = 1.
        if k_mereqitem-bsart = 'ST' and
           k_mereqitem-loekz = ' '.
        om_data-pstyp = '5'. " assign default item category code
        om_data-bnfpo = k_mereqitem-bnfpo.
        om_data-WERKS = k_mereqitem-WERKS.
        om_datax-pstyp = 'X'.
        call method im_item->set_datax
             exporting im_datax = om_datax.
        call method im_item->set_data
             exporting im_data =  om_data.
        endif.
    ENDMETHOD.

    Hi Kumar,
    i have not a special solution for your case, but i use this BADI with great effort
    As my comments in example are in german lg. i explain in short words what i do:
    X) define data
    1) select data from base item
    1a) header-data
    1b) item data (easy)
    1c) accounting data
    2+3) check field values, post warning message + mostly change values + sometimes set cursor focus on field
    Have a look and give me some points if my example increased your BADI knowledge
    regards
    Jörg
    METHOD if_ex_me_process_po_cust~process_item .
    * Business-Add-Inn ME_PROCESS_PO_CUST
    * Jörg Sauterleute - 23.12.2005
    * Ablauf:
    * 1. Datenbschaffung
    * 2. Feldänderungen prüfen + Warnung ausgeben
    * 3. Feldinhalte prüfen + evtl. ändern u. Hinweis ausgeben
      DATA: ls_mepoitem TYPE mepoitem,
            ls_mepoheader TYPE mepoheader,
            ls_mepoaccounting TYPE mepoaccounting.
    * Interfacereferenz auf <if_purchase_order_mm>
      DATA: header_obj TYPE REF TO if_purchase_order_mm.
    * Interfacereferenz auf <if_purchase_order_account_mm> über Tabelle
      DATA: it_accountings TYPE purchase_order_accountings, "Tabelle
            accounting_obj TYPE purchase_order_accounting.
    * Include für Ausgabe von Meldungen
    * im BAdI ME_PROCESS_PO_CUST niemals ABAP-Statement MESSAGE verwenden!
      INCLUDE mm_messages_mac.
    * Hilfsvariablen
      DATA: h_change_mepoitem TYPE c,
            h_text TYPE string.
      IF sy-sysid = 'HLT'. break sau. ENDIF.
    * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    * 1. Datenbeschaffung
    * Kopfdaten
      header_obj = im_item->get_header( ).
      ls_mepoheader = header_obj->get_data( ).
    * Positionsdaten
      ls_mepoitem = im_item->get_data( ).
    * Kontierungsdaten (Accounting) über Tabelle it_accountings
      it_accountings = im_item->get_accountings( ).
    * ...IF eingebaut, weil sonst später Abbruch, wenn sy-subrc <> 0
      IF NOT ls_mepoitem-knttp IS INITIAL.
        LOOP AT it_accountings INTO accounting_obj.
          ls_mepoaccounting = accounting_obj-accounting->get_data( ).
        ENDLOOP.
      ENDIF.
    * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    * 2. Daten prüfen -> Warnmeldung
    * Feld Empfänger (Kontierung) prüfen -> Warnmeldung
      IF ls_mepoheader-ekorg = '1000' AND
         ls_mepoheader-bsart = 'IB'.
        IF NOT ls_mepoitem-knttp IS INITIAL.
          CASE ls_mepoheader-ekgrp.
            WHEN '500' OR '501'.
              IF NOT ls_mepoaccounting-wempf IS INITIAL.
                mmpur_metafield mmmfd_recipient.       "Warenempfänger - Cursor setzen
                mmpur_message_forced 'I' 'ME' '303' text-011 '' '' ''.
    * Warnmeldung wieder aus Protokoll entfernen.
                IF ls_mepoaccounting-wempf IS INITIAL.
                  mmpur_remove_messages_by_id ls_mepoaccounting-id.
                  mmpur_business_obj_id ls_mepoaccounting-id.
                ENDIF.
              ENDIF.
            WHEN OTHERS.
              IF ls_mepoaccounting-wempf IS INITIAL.
                mmpur_metafield mmmfd_recipient.       "Warenempfänger - Cursor setzen
                mmpur_message_forced 'W' 'ME' '303' text-010 '' '' ''.
              ENDIF.
    * Warnmeldung wieder aus Protokoll entfernen.
              IF NOT ls_mepoaccounting-wempf IS INITIAL.
                mmpur_remove_messages_by_id ls_mepoaccounting-id.
                mmpur_business_obj_id ls_mepoaccounting-id.
              ENDIF.
          ENDCASE.
        ENDIF.
      ENDIF.
    * Ende Feld Empfänger (Kontierung) prüfen -> Warnmeldung
    * Ende test
    * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    * 3. Positionsdaten prüfen/ändern -> setzen
      CLEAR: h_change_mepoitem,
             h_text.
    * Kennzeichen Wareneingang prüfen/ändern
    * Belegart 'NB' immer mit "Wareneingang" wegen Log. Rechnungsprüfung
    * Belegart 'IB' immer ohne "Wareneingang" weil Einsatz Workflow
    * (Kennzeichen 'WEPOS' setzen/nicht setzen)
      IF NOT ls_mepoitem-knttp IS INITIAL.
        CASE ls_mepoheader-bsart.
          WHEN 'NB'.
    * Prüfung ob gesetzt
    * Wenn nicht, dann setzen und Daten übergeben
    * Cursor auf Metafeld (aus Typgruppe MMMFD) für Fehlerbehandlung
            IF ls_mepoitem-wepos IS INITIAL.
              ls_mepoitem-wepos = 'X'.
              h_change_mepoitem = 'X'.
    *           im_item->set_data( EXPORTING im_data = ls_mepoitem ).
              h_text = text-001.
              mmpur_metafield mmmfd_gr_ind .       "WE-Kennzeichen - Cursor setzen
    *           message erst später ausführen!
    *           mmpur_message_forced 'I' 'ME' '303' text-001 '' '' ''.
            ENDIF.
          WHEN 'IB'.
    * Prüfung ob nicht gesetzt
    * Wenn doch, dann entfernen und Daten übergeben
    * Cursor auf Metafeld (aus Typgruppe MMMFD) für Fehlerbehandlung
            IF NOT ls_mepoitem-wepos IS INITIAL.
              ls_mepoitem-wepos = ' '.
              h_change_mepoitem = 'X'.
    *            im_item->set_data( EXPORTING im_data = ls_mepoitem ).
              h_text = text-002.
              mmpur_metafield mmmfd_gr_ind .       "WE-Kennzeichen - Cursor setzen
    *           message erst später ausführen!
    *           mmpur_message_forced 'I' 'ME' '303' text-002 '' '' ''.
            ENDIF.
        ENDCASE.
      ENDIF.
    * Ende Kennzeichen Wareneingang prüfen/ändern
    * Kennzeichen aut. WE-Abrech. (Rechnung) prüfen/ändern
    * (für autom. Gutschriftsverfahren Verpackungseinkauf)
    * Kreditordaten
      DATA: it_lfm1 TYPE TABLE OF lfm1,
            wa_lfm1 TYPE lfm1.
      IF ls_mepoheader-ekorg = '1000' AND
         ls_mepoheader-bsart = 'NB'   OR
         ls_mepoheader-bsart = 'KA'.
        IF ls_mepoitem-xersy IS INITIAL AND
           ls_mepoitem-umson IS INITIAL.                    "kostenlose Lieferung
          SELECT * FROM lfm1 INTO CORRESPONDING FIELDS OF TABLE it_lfm1
                   WHERE lifnr = ls_mepoheader-lifnr AND
                         ekorg = ls_mepoheader-ekorg.
          IF sy-subrc = 0.
            READ TABLE it_lfm1 INTO wa_lfm1 INDEX 1.
            IF wa_lfm1-xersy = 'X'.
              ls_mepoitem-xersy = 'X'.
              h_change_mepoitem = 'X'.
    *          im_item->set_data( EXPORTING im_data = ls_mepoitem ).
              h_text = text-005.
              mmpur_metafield mmmfd_ers.       " Kennz. aut.WE-Abrechnung - Cursor setzen
    *            message erst später ausführen!
    *            mmpur_message_forced 'I' 'ME' '303' text-005 '' '' ''.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    * Ende Kennzeichen aut. WE-Abrech. (Rechnung) prüfen/ändern
    * Kennzeichen WE-bezogene Rechnungsprüfung (Rechnung) prüfen/ändern
    * (für autom. Gutschriftsverfahren Verpackungseinkauf)
    * Kreditordaten bereits deklariert
    *  DATA: it_lfm1 TYPE TABLE OF lfm1,
    *        wa_lfm1 TYPE lfm1.
      IF ls_mepoitem-knttp IS INITIAL.
    * nicht anwenden bei kontierten Bestellungen
        IF ls_mepoitem-pstyp = 0.
    * nicht anwenden bei gefülltem Positionstyp (z.B. 'L' = Lohnbearbeitung, Preis 0,00 EUR)
          IF ls_mepoheader-ekorg = '1000' AND
             ls_mepoheader-bsart = 'NB'   OR
             ls_mepoheader-bsart = 'KA'.
            IF ls_mepoitem-webre IS INITIAL AND
               ls_mepoitem-umson IS INITIAL.                    "kostenlose Lieferung
              SELECT * FROM lfm1 INTO CORRESPONDING FIELDS OF TABLE it_lfm1
                       WHERE lifnr = ls_mepoheader-lifnr AND
                             ekorg = ls_mepoheader-ekorg.
              IF sy-subrc = 0.
                READ TABLE it_lfm1 INTO wa_lfm1 INDEX 1.
                IF wa_lfm1-webre = 'X'.
                  ls_mepoitem-webre = 'X'.
                  h_change_mepoitem = 'X'.
    *          im_item->set_data( EXPORTING im_data = ls_mepoitem ).
                  h_text = text-006.
                  mmpur_metafield mmmfd_gr_based_iv.   "WE-bezogene RP - Cursor setzen
    *            message erst später ausführen!
    *            mmpur_message_forced 'I' 'ME' '303' text-006 '' '' ''.
                ENDIF.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    * Ende Kennzeichen WE-bezogene Rechnungsprüfung (Rechnung) prüfen/ändern
    ** Kennzeichen Auftragsbestätigungspflicht prüfen/ändern
    ** (bisher nur Natec)
    ** Infosatzdaten (Konditionen) deklarieren
    ** Verweis of Tabelle mit Kopfzeilen immer mit TYPE TABLE OF
    *  DATA: it_ekomd TYPE TABLE OF ekomd,
    *        wa_ekomd TYPE ekomd.
    *  IF ls_mepoheader-ekorg = '1300' AND
    *     ls_mepoheader-bsart = 'NB'   .
    *    CALL FUNCTION 'ME_GET_INFORECORD_CONDITIONS'
    *      EXPORTING
    *        i_ekorg = ls_mepoheader-ekorg
    *        i_esokz = '0'                                       " '0' = NB
    *        i_infnr = ls_mepoitem-infnr
    *        i_lifnr = ls_mepoheader-lifnr
    *        i_matkl = ls_mepoitem-matkl
    *        i_matnr = ls_mepoitem-matnr
    *        i_werks = ls_mepoitem-werks
    *      TABLES
    *        tekomd  = it_ekomd.
    *    SORT it_ekomd BY datbi DESCENDING.
    *    READ TABLE it_ekomd INTO wa_ekomd INDEX 1.
    *    CASE ls_mepoheader-ekorg.
    *      WHEN '1300'.
    **     Anforderung Natec: wenn Infosatz-Kondition
    **       a)  leer o. nicht gültig  => AB setzen, wenn fehlt
    **       b)  älter       2 Monate  => AB setzen, wenn fehlt
    **       c)  nicht älter 2 Monate  => AB entfernen, wenn gesetzt
    **     Hilfsvariablen
    *        DATA: h_vgldat   TYPE sy-datum.   " Vergleichsdatum
    *        DATA: h_ergebnis TYPE c.
    **     Alter der Infosatzkondition ermitteln.
    *        CALL FUNCTION 'CCM_GO_BACK_MONTHS'
    *          EXPORTING
    *            currdate   = sy-datum
    *            backmonths = '002'
    *          IMPORTING
    *            newdate    = h_vgldat.
    *        IF wa_ekomd-datbi < sy-datum OR    " gefunden Kondition nicht gültig oder
    *           wa_ekomd-datbi IS INITIAL.      " keine Kondition gefunden
    *          h_ergebnis = 'a'.
    *        ENDIF.
    *        IF wa_ekomd-datab < h_vgldat.
    *          h_ergebnis = 'b'.
    *        ENDIF.
    *        IF wa_ekomd-datab > h_vgldat.
    *          h_ergebnis = 'c'.
    *        ENDIF.
    **       Prüfung ob nicht gesetzt
    *        IF ls_mepoitem-kzabs = ' ' AND
    *                  h_ergebnis = 'a' OR
    *                  h_ergebnis = 'b' .
    *          ls_mepoitem-kzabs = 'X'.
    *          h_change_mepoitem = 'X'.       "Merker setzen, geändert wird am Schluss
    **               im_item->set_data( EXPORTING im_data = ls_mepoitem ).
    *          h_text = text-003.
    **               message erst später ausführen!
    **               mmpur_message_forced 'I' 'ME' '303' text-004 '' '' ''.
    *        ENDIF.
    **       Prüfung ob gesetzt
    *        IF ls_mepoitem-kzabs = 'X' AND
    *           h_ergebnis        = 'c' .
    *          ls_mepoitem-kzabs = ' '.
    *          h_change_mepoitem = 'X'.       "Merker setzen, geändert wird am Schluss
    **               im_item->set_data( EXPORTING im_data = ls_mepoitem ).
    *          h_text = text-004.
    **               message erst später ausführen!
    **               mmpur_message_forced 'I' 'ME' '303' text-003 '' '' ''.
    *        ENDIF.
    *    ENDCASE.
    *  ENDIF.
    ** Ende Kennzeichen Auftragsbestätigungspflicht prüfen/ändern
    * Bestell-/Bestellpreis-Mengeneinheit prüfen/setzen
      DATA: h_txz01 TYPE mepoitem-txz01.   " Materialkurztext
      IF   ( ls_mepoheader-ekorg = '1000' OR
             ls_mepoheader-ekorg = '1500' ) AND
             ls_mepoheader-bsart = 'IB' AND
         NOT ls_mepoitem-knttp IS INITIAL.
    * Vergleichen ob eingegebene Mengeneinheit in Kurztext "avisiert"
        CONCATENATE '(' ls_mepoitem-meins ')' INTO h_txz01.
        IF ls_mepoitem-txz01 CS h_txz01.
          IF NOT ls_mepoitem-meins IS INITIAL.
            mmpur_metafield mmmfd_unit .       "Steuer-Kennz. - Cursor setzen
            mmpur_message_forced 'W' 'ME' '303' 'ME' ls_mepoitem-meins
                                                     text-031 ''.
          ENDIF.
    * sonst standarmäßig 'LE' setzen wegen Problemen bei Obligo
        ELSE.
          IF NOT ls_mepoitem-meins = 'LE'.
            ls_mepoitem-meins = 'LE'.
            ls_mepoitem-bprme = 'LE'.
            h_change_mepoitem = 'X'.
    *      im_item->set_data( EXPORTING im_data = ls_mepoitem ).
            h_text = text-030.
            mmpur_metafield mmmfd_unit .             "Steuer-Kennz. - Cursor setzen
    *      message erst später ausführen!
    *      mmpur_message_forced 'I' 'ME' '303' text-030 '' '' ''.
          ENDIF.
        ENDIF.
      ENDIF.
    * Ende Bestell-Mengeneinheit prüfen/ändern
    * Steuerkennzeichen prüfen/setzen (für EK-Gruppe 500,501)
      IF ls_mepoheader-ekorg = '5000' AND
         ls_mepoitem-matnr IS INITIAL.
        CASE ls_mepoheader-ekgrp.
          WHEN '500' OR '501'.
            IF ls_mepoitem-mwskz IS INITIAL.
              ls_mepoitem-mwskz = 'V4'.
              h_change_mepoitem = 'X'.
    *    "      im_item->set_data( EXPORTING im_data = ls_mepoitem ).
    *          h_text = text-020.
    *          mmpur_metafield mmmfd_tax_code .       "Cursor Steuer-Kennz.
    *    "      message erst später ausführen!
    *    "      mmpur_message_forced 'I' 'ME' '303' text-020 '' '' ''.
            ENDIF.
        ENDCASE.
      ENDIF.
    * Ende Steuerkennzeichen prüfen/ändern
    * zu 3.
    * zum Schluss noch die geänderten mepoitem-xxxx setzen
    * + gleiche Meldungen (I ME 303) ausgeben
      IF h_change_mepoitem = 'X'.
        im_item->set_data( EXPORTING im_data = ls_mepoitem ).
      ENDIF.
      IF NOT h_text IS INITIAL.
        mmpur_message_forced 'I' 'ME' '303' h_text '' '' ''.
      ENDIF.
    * Ende Daten prüfen/ändern -> setzen
    ENDMETHOD.                    "IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM

  • Chromium GPU Process high CPU usage

    Hi!
    This issue isn't new but unfortunately doesn't go away on its own with upgrades and looking at my Google results I start wondering whether I'm the only one with this problem: the "GPU Process" is almost constantly maxing out one core (or more).
    This is on a GeForce GTX 660 (which has an GK106 AFAIK) and always the most recent closed-source drivers from NVIDIA (because nouveau still crashes/freezes in a matter of minutes). Disabling the GPU acceleration screws up chromium's renderer badly (but great to have a switch for that, anyway!) and hence is no option.
    Anybody else having this problem? Any advice?
    thx
    tcn

    tcn wrote:
    Hi!
    This issue isn't new but unfortunately doesn't go away on its own with upgrades and looking at my Google results I start wondering whether I'm the only one with this problem: the "GPU Process" is almost constantly maxing out one core (or more).
    This is on a GeForce GTX 660 (which has an GK106 AFAIK) and always the most recent closed-source drivers from NVIDIA (because nouveau still crashes/freezes in a matter of minutes). Disabling the GPU acceleration screws up chromium's renderer badly (but great to have a switch for that, anyway!) and hence is no option.
    Anybody else having this problem? Any advice?
    thx
    tcn
    I have an Intel Xeon E3-1230 v3 and Nvidia GeForce GTX 660 Ti and have the same symptoms as you where flash and html5 video max out the cpu. Performance in both Firefox and Chromium is horrendously poor and games in Steam are so slow they're unplayable.
    After trying to find a solution to this over semester break I gave up. I've been taking a similar approach and hoping that with an update the problem may be fixed but nothing has come along yet.
    If there is anyone else that's had success with this Nvidia card or something similar please let us know you secret?

  • E4200 - Okay router, setup issues

    I chose this router over the Netgear N750 because of previous bad experience with their customer support and over the Asus RT-N56U b/c of a compatibility issue with a specific application.
    The Cisco Connect Software is very poor software. No OSX Lion support so I could not use my Mac for setup and it could not even detect the router on a wired connection on a Windows 7 PC through a simple Dell unmanaged switch. Even the router setup software built into Windows had no problem with that. I had to rely on manual setup which was straightforward.
    Range was mostly adequate for me with both 2.4 and 5 Ghz over 5,000 sq. ft. of indoor space with no direct line of sight, through many walls, multiple floors, and the outside patio also, although with a few connected devices I found the 5 Ghz band somewhat unreliable at times. Wired gigabit performance was good enough for my purposes.
    Overall a decent router, not bad, not great. 

    It seems like you are using an outdated version of Cisco Connect Software… There is a new release of the Cisco Connect Software that supports Mac OS X (10.7 "Lion")… So you need to download the latest Cisco Connect from the Cisco Website (homesupport.cisco.com) or you can use this link: http://homesupport.cisco.com/en-us/support/routers/E4200 ... After downloading you need  to set the router to factory defaults, power cycle the whole network and then run the Cisco Connect that you downloaded…
    For more information about setting up E4200 router with Cisco Connect. Please refer to the link below.
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=22732&userrole=Links...

  • Need help regarding sql loader

    Hi ,
    I am executing following command
    sqlldr admin_user@ces CONTROL=D:\sample_control.ctl log=D:\sample_log.log bad=D:\Sample_bad.bad
    In case of valid data it is inserting the data properly into the table. While invalid records added into the bad file.
    Now I want rollback valid data whenever count of bad file greater than equal to 10.
    In short whenever file has more than 10 invalid records , I don't want to insert any record from that file.
    Please provide me the solution.Thanks in advance.

    SQL*Loader Command-Line Reference
    DISCARDMAX(integer)
    Regards
    Etbin

  • GOS - Displaying Attachments service

    Hi everyone,
    Using GOS dispalying attachment service, i get attachment list with standard buttons (Create, display, export...). My question is - is it possible to exclude some of those functions(buttons), for example make it impossible to delete attachments?
    I'm using SWU_OBJECT_PUBLISH and
    SWU_OBJECT_DISPATCH_SERVICE function modules.
    Thanks a lot!
    MaryM

    Can you be a little more specific? This BAdI works great if the value is in the SGOSATTR table, but I can't find how to remove the delete button from the View Attachments subscreen.
    Thanks.

  • GOS in PA20

    Hi,
    we are using GOS in transaction pa20.
    If the user deletes the personalnumber in the RP50G-field, a specific button in the GOS Toolbar should be deactivated. Unfortunately the Methode "check_status" is not called again, if the user deletes the personal number. Does anybody knows, how it could work? (Is there an event?)
    Thanks for your replies in advance!
    With kind regards,
    Reinhold Strobl

    Hi,
    thanks for your reply! The BADI is great!
    But, the Badi is NOT called, when the user erases the personal number in PA20 und presses "Enter".
    Therefore I have got still the Problem, that a specific service is active, which should not be if the user enters NO personal number.
    Kind regards!

  • "Could not create ac3" error when burning Blu-ray

    I've spent the last week designing a Blu-ray in Encore CS5.  Upon burning, I was given the error message "Cannot create '_sessionfiles_Dsf_session_1_audio.ac3", and the burn failed (after going for seven hours).  I really don't even know where to begin with this.  The Blu-ray is about 80% full (20 GB) and includes multiple timelines and several menus (one of which has audio).  No pop-ups.  It should be a fairly straightforward project.  However, it's given me problem after problem and has taken way too much time.  Can anyone offer insight before I spend another week tracking down the problem?  Thanks.

    In the last few days, things have gone from bad to great and back to bad, and it's been non-stop work.  I freed up a ton of space on the computer and backed it up.  Then the computer gave me a kernel panic, which happened so often that I had to restore the whole computer.  I don't know if that's related to the Encore issue.  Then I tried to burn again, and it seemed to be working until it gave me an error message that said "Blu-ray Error: 'device error', code '3', Note: ".  So I looked around online and decided to export as an ISO disc image file.  That worked fine.  Then I tried burning a Blu-ray using third-party software, which failed halfway through.  Next I tried burning using Disc Utility.  It got all the way to the end and said "Could not verify" and failed.  I tried playing it in my Blu-ray player anyway.  For the first time, it actually worked.  The movie and the Scene Selection menu work fine.  But when I try to go to Special Features, nothing happens.  The Blu-ray is supposed to go to the Special Features menu at the end of the main movie, but it just goes to a black screen after that and locks up.  Now I'm really lost.  Any more suggestions?  Thanks.

  • I need help ! Just help me because I'm new ?

    Hi there !
    I installed windows 8.1 and then visual studio 2013 . then because I need the sharepoint server I installed hyper-v windows server 2012 , installed active directory domain , add new forest , sql server 2012 , sharepoint foundation 2012 , and create a new
    server farm successfully , but now when I run visual studio on windows 8.1 and want to add sharepoint connection to the sharepoint solution it give the same Error that give if sharepoint is n't install on local ?
    Please help me how can I add sharepoint connection ( sharepoint that installed on hyper-v windows server 2012 . the windows server that installed as vm on windows 8.1  ) to visual studio ( visual studio that installed on windows 8.1 ) ?
    Help me please and for give me if my English is bad
    Thanks
    Great Regards :
    Raha
    whit the best regard : Raha

    Please repost your question in the correct forum.  This forum is for the product Virtual Server 2005. 
    Since you need help with SharePoint, one of the SharePoint forums would be a better place for help.
    http://social.technet.microsoft.com/Forums/en-US/home?category=sharepoint

  • Can you disable Optimus on all 4xx and 5xx models?

    I'm looking for a Lenovo laptop that can run its nVidia graphics on Windows. From Lenovo support site, I found Lenovo nVidia drivers for Windows XP for the following Lenovo models: T430, W530, T410, and W510. I also read that you can disable Optimus on such models from the BIOS.
    Does all such models support disabling Optimus? Or are there T430s, W530s, T410s, and W510s sub-models that cannot  disable Optimus? The bottom line is, am I safe with those models?
    Also, are there T430s sub-models that come with Intel HD-only? If that's the case, I would avoid them; suffice to say that I just don't want to use Intel HD graphics, and I've been avoiding Intel HD for anything other than Office. I'll only buy the models that come with nVidia discrete graphics. How do I know whether a sub-model doesn't have nVidia? I'll buy the laptop from ebay, by the way, so I need to make sure if the sub-model actually have nVidia graphics.
    By the way, my need is very specific. In other words, I need a laptop that support both nVidia and Windows XP (able to run nVidia graphics on Windows XP). Please do not respond with "use Windows 7 instead". You see, I already have Windows 7 laptops for that matter, so the last thing I need is another Windows 7 laptop.
    Anyway, I also have Lenovo B460. **bleep** fine laptop, able to run nVidia graphics on Windows XP. Too bad such great models are not made anymore. What I'm looking for is a perfect replacement for my B460, because I'm concerned the laptop will eventually die off because of wear and tear.

    Yes, you can get all models of TX10's to TX30's with Intel only, these workhorse models of the ThinkPad have
    always been highly configurable, so you must really read the model description when/if you get one. The best
    thing to do is to get the machine MTM (machine type / model) and look it up on support.lenovo.com.
    If I remember correctly, the early T410/T510 that were equipped with the nVidias were called Switchable Graphics
    models, the Optimus wasn't available until later, as per the article I posted. But in all the latest BIOS'es for the
    Swichable Graphic models, you can choose between integrated / discreet / switchable, same as with Optimus.
    Only thing, as I said, that you have to do is be mindful of which model you're getting and examine the specs
    closely, as the options for them are vast. No matter which one you get, XX10's to XX30's, they are all based
    on the same principle, just different generations.
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • This is a RAID

    Final Cut Pro (badge number 5.1.4) busted me. The charge: dropped frames in a 40-minute sequence while trying to smuggle edited footage back to tape (via Print to Video). Needing some advice to bail me out of this project's arrested development ...
    In all seriousness, I'm looking for a reference/tutorial on how to configure my external hard drives into a RAID. Plus the mechanics (the whys) behind this set-up. I have a work-around that has seen me through the current project in which the errors cropped up. So I'm basically looking ahead with this post to enjoy a future of smoother workflows.
    Right now, the three LaCie drives I'm using – a pair of 160s that have been daisy-chained and a 300 GB connected straight into the G5 – have been OK (and I'm down with the fact – now at last – that the original meaning of OK is: so-so, passable, not bad, not great ...) for the 10-minute or shorter productions I've been cranking out.
    But a little reading lately (following the bust) is telling me that I'm destined for nightmares under this arrangement as I venture into bigger projects. Error message noted drive speed as the cause of the dropped frames. Hence, the quest for some best-practices advice and further reading.
    Also, any advice on brands of drives. I've not had any real trouble with LaCie, but have read about other folks being pushed to the brink.
    Thanks in advance,
    Jeff

    If you are going RAID, you might look at the Western Digital RE2 drives, compared to Seagates here (there's a full review somewhere if you search storagereview)
    http://www.storagereview.com/ST3750640NS.sr?page=0%2C1 (search in that site for more specifics by RE2)
    The neat thing about them is that they will time out after 7 seconds for errors. Bad if using them as single drives, but great for RAID as I've had a lot of Seagate drives taken off-line by the RAID controllers when they took a very long time to respond (due to trying to correct errors).
    You might also consider the 3Ware Sidecar:
    http://3ware.com/products/Extserialata2-9000.asp
    They just had a price reduction to $895 list. A much larger company than probably any Mac controller company.
    The neat thing about them is that you can add a BBU (battery backup unit) to the controller for about $100.
    This can save you during a power supply failure or a Mac OS crash. It deals with the hard drive's cache memory journaling on a very low level (data isn't really written until its moved to the hard drive from the cache, so you have to worry about that).
    I've been using them on the Windows platform for years with zero data loss. Great on the Mac, especially for video use where you need very high data rates.

  • Cisco Connect Software

    Since upgrading to Mountain Lion, I can no longer use my Cisco Connect Software to manage my wireless network.  I get the following Error Message: 
    The router software supports these operating systems:
    - Mac OS X 10.5.8 or later
    - Mac OS X 10.6.1 or later
    - Mac OS X 10.7 or later
    Any help would be appreciated.
    Message was edited by: vatkins1906

    As you might know by now, Cisco Connect might not have an upgrade since Cisco basically came out with a new application named "Cisco Connect in the Cloud". This one need a firmware upgrade on your router first to Ver.1.1.38.138880 wich you will find at http://homesupport.cisco.com/en-us/support/ccc.
    Connect in the cloud is not bad, not great either but do as much as  the regular Connect and some but this time from anywere you have internet access. The Con is that you will never be able again to use the typical settings using the IP address of your router. Yap you read righ, never again unless you decide to roll back the firmware to the previous version. Cisco have instructions have to do it. Other Cons at least for me is that the download speed came from almost 12 mbps to 2 mbps. At least that what the speed test show, but i have not seen the reduce speed in real. My web access still good and super fast. If i connect directly to the modem shows almost 12, connect to the router 2mbps. Wierd.
    Any way good luck

  • Map layers out of sync in 6120c

    v 03.83
    19-06-07
    rm-243
    nokia 6120c(b04.01)
    model: 6120c-1
    type: rm-243
    product code: 0546330
    2GB microSD
    Not using GPS and no data connections (GPRS, UMTS)
    Using only PC maploader (ver 3) and nokia_maps_1_0_s60_3rd_ed_fp1.sis (ver 1.02)
    First installed in december and then were all OK. Then, in january updated maps and find that layers are shifted (streets and other marks shifted north) in zoom levels 20 to 2 km. After zooming more in, than 2km, blue color disapear.
    Trayed also 2beta and maploader 3.5, but with same results.
    Tryed *#7370# and format my microSD, same results.
    Can anybody give advise.
    Sorry my bad english.

    Great that you managed to fix the problem. I've added the fix to http://nokiamaps.moo.no .
    18-Feb-2008 10:50 PM
    ivarle wrote:
    Thanks to Martin.
    Downloaded and tested different versions maps
    not sync
    http://static.s2g.gate5.de/maploaderzip/0.0.9h/*.zip
    sync
    http://static.s2g.gate5.de/maploaderzip/0.0.8h/*.zip
    http://static.s2g.gate5.de/maploaderzip/0.0.7h/*.zip
    with 0.0.7h blu color not disapearing, when zooming in, but from that catalog zip-s was smallest so i put from catalog 0.0.8h
    symbian programs & themes, nokia maps for any browser on any operating system of your choice, and other tricks to tame symbian: http://symbian.site666.info

Maybe you are looking for

  • How to get the draft and sent folder in java mail

    i found the File Not Found error while accessing the draft,sent folder to fecth from the mail sever using IMAP. i m using the code like tis draft=store.getFolder("draft"); sent=store.getFolder("sent"); And i want to know whether the draft,sent,trash

  • How to check validity period

    Hi All, i have a requirement, while creating sales order i want to check creation date with some date range (this will come from some ztable). whether the creation date is in the range or not. Can you help on this.. Regards., Raj.,

  • FlashBuilder 4 does not want to display RDS Dataview

    My system: Windows XP SP 3 ColdFusion 8 I cannot get The RDS Dataview to show up. I have configured the RDS service exactly as I have it in my FB 3, where it works fine. In FB 4, after I do Window > Other Views the Show View window does not even show

  • Recovery Disks not recognized on UEFI

    Satellite L875D-S7332 So I recently bought this model, which came with win8. Then I downgraded it to win7 because I'm just not ready for win8's dual nature yet. Only problem is there's essentially 0 driver support on win7, installing them just causes

  • Show a message box after the concurrent program completes normal

    Hi, I have a requirement to show a message box with some message once the concurrent program is COMPLETED NORMAL. Can we do this through form customization or is there any other way?? Thanks in advance Thanks, Venkat