Bad update for ITUNES and QUICKTIME

After this update of ITUNES 7.0.1, and QUICKTIME 7.1.3
I am getting tons of skips, blanks of silence, etc
when listening to ITUNES while browsing the net with SAFARI.
What's the deal?

thanks for replying.
Yes I checked and the settings are standard.
44100 and 2 ch 16 bit
I wonder what else could be the problem?
I do have ac lone copy of my HD before the Itunes and quicktime updates.
I havent done the 10.4.8 update yet, do you think that could be it?
also the latestsecurity update has not been done, could that be where my problem is?

Similar Messages

  • I am unable to install the newest update for itunes and quicktime because of a bonjour error about path not being located

    I have windows 7 and I have been trying to install the newest update for itunes and quicktime but I keep receiving the same Bonjour error. I even tried to do it manually and no luck. I also tried to unistall bonjour but it would not even allow me to unistall it either. No matter what I do I get the same error listed below:
    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    I would greatly appreciate any help because this appears whether i am trying to install the updates or remove bonjour to reinstall. I am stuck.
    Thank You in advance!!!

    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • Latest update for Itunes and Quicktime has killed my internet

    Last night i updated the latest Itunes and quicktime as per my regular software update process. The system required a reboot which i completed. I then complete permissions verifications and repairs.
    I then attempt to open safari and go online it could not access the internet. Nor could it access the wi-fi config. pages. The signal of the airport was high and the router box appears to be working fine.
    When i tried to open internet connect it opened the programme but could not access any details. It simply goes to the colour wheel. I attempted a reboot and experienced similar problems.
    Please help!

    I have excactly the same problem. After completing this update my Airport card finds my home network no problem with a good strong signal, BUT I am not connected to the internet. When I look at the Network settings under the summary I have an amber'light' and the text says that whilst I am connected to my home network there is no IP address and it can not connect to the internet. Last time I had Aiprort sleep issues after a Security update and I had to memove the /System/Library/Extensions/AppleairportKext2 file to solve it. I noticed that this file is back again so deleted it, but still no joy as I can't get Airport to detect an IP address. My router is working fine as my Tiger equipped laptop connexts via Airport withy no problem, so it is something in this 10.3.9 suite of updates (iTunes/Quicktime/Security as at Nov 07) that has done it.
    I now get a spinning beach ball when I select the menu bar Airport icon.
    As my wife uses this computer for all her internet work and email, I am in big trouble as it is clearly all my fault. Any good samaritans that can restore marital harmony would be much appreciated.

  • Applications won't open after update to iTunes and QuickTime

    I just allowed a software update for iTunes and QuickTime. After rebooting, I found that the Finder will not start, nor Mail nor most other applications. TextEdit will start, which gives me the Menu bar so I can switch users, but all users have the same problem.
    I cannot see the hard drive icon without the Finder. If I hit the Finder button, it wiggles and then dies. Safari starts, but "quits unexpectedly" when I try to browse with it.
    I bought the G5 with 10.2 installed, then upgraded to 10.3 I have the 10.3 upgrade disks, but don't know if I can use these to do an archive and re-install.
    I can see the hard drive by doing an "open" from TextEdit, but of course I can't use that to open another application. I've booted of the 10.3 upgrade disk and used Disk Repair, but it found no problems. Lots of permissions problems, but I doubt that is causing the trouble.
    I'm in a real fix here. Any suggestions?
    Thanks,
    Ray
    G5 Mac OS X (10.3.9) )
    G5   Mac OS X (10.3.9)  

    I'm having a similar problem only with disk utility after updating iTunes and Quicktime. I am unable to repair permissions, but otherwise the machine is working great as before. When I try to repair permissions using either Cocktail or Onyx it just keeps going, going, going and going but never finishes. It will run for several hours before I have to force quit the application. Repairing permissions has never taken more than 15 minutes prior to this update.
    I decided to try using disk utility while booted to osx, I get a message that says communication between the disk managment tool and disk utility has been lost and operation cannot continue. The same error occurs when running disk utility off the startup cd. I restored using my backup then ran disk utility and all was okay using all of the methods mentioned above. I installed the updates again and the same problem occurs when trying to repair permissions.
    Guess I will reload my backup and wait for a fix from apple unless someone chimes in with ideas on what could be wrong. Thank goodness for backups!!! This is the first software update that has given me any problems. Oh, one other thing. I installed the updates on my titanium powerbook running 10.3.9 and didn't have any problems. The setup on my tibook is essentially the same as my powermac G4. What gives? Anyone else having problems after installing the updates?

  • I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with it any more. I don't think I can upgrade the Spin Doctor without buying a new program.  Is there a way to undo the last iTunes update?

    I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with iTunes, specifically, I can't get music files to go over to iTunes.  Spin Doctor gives me a message indicating that iTunes isn't working properly.
    I am using iTunes 9.1.1(12) and Spin Doctor 3.1.1.304t.  I have investigated upgrading the Spin Doctor but I think too much time has passed and the version available are too far advanced. 
    Any ideas?  Can I undo the iTunes upgrade?  Is there a website that I can go to to get the upgrade for my Spin Doctor?
    Thanks.
    Mary

    If your iMac is an Intel CPU model, you can upgrade the OS to OS X 10.6 Snow Leopard.
    Then use software update to update 10.6 Snow Leopard to OS X 10,6.8.
    Then you can run the latest iTunes to sync your iPad running iOS 6
    You can purchase OS X 10.6 Snow Leopard by calling Apple at 1-800-MYAPPLE. Ask for retail software sales and purchase a copy of 10.6 for $19.99 plus shipping.

  • I down loaded the latest update for itunes and now it says Ive lost MSVCR80.dll and don't know how to repair it

    When requested I tried to down load the latest update for itunes and now I cant open itunes as it says Ive lost the MSVCR80.dll file and I don't know how to repair it.
    I've tried re-installing as the error message instructed but that hasnt worked.
    Can anyone help?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm

    i just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm, i also cant sighn in either it just keeps on saying accessing itunes....

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I have a Mac book pro and I did an update for itunes and now the itunes application won't open t

    I have a Mac book pro and I did an update for itunes and now the itunes application won't open

    Yes. Check to see if the iTunes application has been moved or renamed before installing it.
    (67527)

  • I download latest software update for itunes and iphone. they successfully download, but then a message comes up saying unable to install as file has been corrupted. what is the cause?

    I download latest updates for itunes and my iphone, when it comes to installing, it successfully downloads, but then i get a message for iphone software error=1403 file corrupted, and for itunes it downloads, then when i try to install it a message says unable to install software, file maybe corrupted!! 

    The iTunes update must be downloaded and installed before you try and use it to update the iPhone OS
    Download iTunes 10.2.2 from here: http://support.apple.com/kb/DL1103
    When it completes it will auto mount the disc image and show you the package installer, don't try and do anything with the file until it gets to this stage.
    Once that's installed reboot the Mac, run iTunes, connect your iPhone and let it sync, then hit the update button and let it complete that step by itself (which will require a restart of the iPhone)

  • HT1338 trying to download update for iTunes and keep getting the following   An error occurred while installing the updates.(103

    trying to download update for iTunes and keep getting the following   An error occurred while installing the updates.(103

    Try to download direct from here.
    http://www.apple.com/itunes/download/

  • I have attempted about five times to download the update for itunes and each time it tells me there was an error downloading to try again.   Help:)

    I have attempted to download the update for itunes and I keep getting an error.  Suggestions??? 

    Are you trying to RUN or SAVE the download?
    Make sure to choose SAVE.
    Also, are you current on all your windows update packages?
    And what is your internet connection - is it wireless, or wired?

  • Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

    Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • Keep trying to install update for itunes and keep getting 'invalid signature'

    keep trying to install the new updates for itunes and keep getting 'invalid signature' and it won't download

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I have just downloaded update for itunes and now my ipod is not recognised, my ipod is displaying a picture of a usb cable and itunes logo , please help

    I have just downloaded the latest update for itunes and now my ipod is not recognised and my ipod is showing a usb cable and itunes logo please help me.

    Try the troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Itunes wont open after update for itunes and ipod

    alright, so i have no clue what im doing. ive been going through this board looking for different solutions to my problem but nothing seems to be working and im running out of options.
    i was having troubles with itunes before, so i unistalled itunes and quicktime and reinstalled it, and i was still experiencing the same problems with having the program open. i uninstalled and reinstalled once more and then i got it to open and when i tried to update my ipod, it said i needed the new updater software, so i downloaded that. after all of that, my itunes won't open again and i dont know what to do anymore. i just want my stuff to work and nothing i seem to do helps with the problem.
    any ideas on what to do to get both itunes and my ipod to work again?

    Perhaps this Apple KnowledgeBase article will help:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem
    Good luck.

Maybe you are looking for