Bad versions also for different color and contrast!!!!! Help

hi,
the master sharper than version is an issue for me also knowing that is due to antialiasing in monitor scaling (I print 200+ sport shoots in 1 hour at the end of ski races after racers seen them on monitor and give me ok for print - and need a fast but good software).
But further to this my AP2 on MBPro show the message "Proofing Profile: Apple RGB" at the bottom of the viewer for each image. If I press P key for Quick preview the message disappear but the master images is much more contrasted, darker, and of a different color (and sharper) but much more good than version!!!??? How can i work on a so bad version and also in full screen mode!
Speed is now good, but if no more good suggestion will arrive Ill'be compelled to swich back immediately to 1.5.6 or try again Adobe LR.

abetone wrote:
But further to this my AP2 on MBPro show the message "Proofing Profile: Apple RGB" at the bottom of the viewer for each image. If I press P key for Quick preview the message disappear but the master images is much more contrasted, darker, and of a different color (and sharper) but much more good than version!!!??? How can i work on a so bad version and also in full screen mode!
You've turned on on-screen proofing. Go to View>Onscreen Proofing to turn it off.
Ian

Similar Messages

  • Color and contrast different from Premiere Pro 2 DVD creation

    I found after creating DVD's via Premiere Pro 2 are more saturated and more neutral in color vs encoding through Encore.
    I made a si8de by side test, converted them back to AVI and grabbed the same still of each. The Encore still was lower in contrast (flatter) and a slight bit warmer. over all the DVD compression from PP2 gives a richer look. If you are a film maker or photographer this matters a lot, but not for most users.
    the file sizes from premiere are bigger. for example a 8mbs from a 7:30 avi compression on premiere resulted in 544mb while a 9.4 compression via encore 2 resulted in 464 mb. when changing the mbs from 8-9.4 mbs it resulted in exactly the same size file 464mb. even when starting a new project, which means that there might be a bug and encoding on a unknown predetermined mbs, probably 7. This would explain the flatter look of the Encore 2 compression.
    Does anyone know how to find out at what rate a dvd has been encoded after it's done? knowing that there isn't any difference in the file size between 8mbs and 9.4 mbs shows that there must be a problem.
    This test was done with the Encore DVD 2 trial version. I have vs 1.51 as well and will make a test on this one as well. to see if there is the same problem.

    1. Can you detail your exact method, step-by-step, for both Premiere and Encore?
    encode encoded in premiere 2 at the highest level 9mbs (didn't chapter for a simple auto disk, this is disabled in pp2 but you can save as an mpg2 and import for chaptering in Encore2)
    2. Did you use the exact same source files for all tests, or just files that were the same duration?
    Exactly the same source file, when importing the mpg2 into premiere i simply imported each file in the timelime and saved exactly the frame of each mpg2. All this started when i first compared 2 encodings from a film directors reel where quality is crucial, and saw it immidiatly when playing the 2 different dvd's of the same reel on a DVD player (JVC) and Sony monitor.
    3. Be sure to include project settings and program preferences for both applications.
    encore 2 encoded at cbr 1x 9mbps (highest)
    Premiere 2 encoded at cbr 1x 8mbps (highest)
    when setting to 9mbps in PP2 I get the3 following warning:
    Total Video and audio bitrate (10.536 Mbs) exceeds maximum allowable bitrate (10.030 Mbps) for DVD type of muxing.
    So i reduced the bitrate to 8 and still got a file of 557mb and better color and contrast than Encore2.
    The final results of encoding in PP2 gives an identical DVD mpg as far as color and contrast to the original AVI.
    When encoding at the max rate of 9 in PP1.5 i never got this warning.
    I just repeated the above test on more time in PP2 and Encore DVD 2
    they must use a different codec for Encore2 than PP2.
    Besides the color and gamma shift the image size horizontally is a slight bit different (larger) than the one done with PP2, but not verically.
    you can also encode in PP2 save it as a multiplexed mpg2 file and than chapter it for the final dvd in encore2 which gives you the higher quality results of PP2.
    Klaus

  • Camera raw 8.7 color and contrast shifts when file opened in ps 6

    camera raw 8.7 color and contrast shifts when file opened in ps 6

    Thanks ssprengel for the suggestions and running a side by side yourself. I went through all my settings and applied your suggestions and did a side by side each time. I even uninstalled the entire creative suite on my system then reinstalled and updated and I still get the same outcome. It was fine yesterday with the previous version of ACR. It seems like the updated version is not showing the image preview in any color space. When I switch the color space in the workflow options the histogram changes but it doesn't seem to affect the preview window. And yes the preview button was checked on it was just when I was using the screen grab tool in windows it took focus away from the application so that is why the settings appear grayed out. I have attached more screen grabs below illustrating all my settings. Also here is some system info if anyone out there has a similar setup and would be willing to test.
    Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1

  • Making different signals for different color average of the pixcells

    Hello, everyone.
    I'll take image of paper money by webcam,
    and get the color average of the bills
    and fractionate the color average by wavelength range of each bills.
    and I want to making signal releasing time differently for different color average of the pixcells.(to fractionate the kind of bills)
    (I want different signal for different kind of bills) 
    my question is this:
    (1)How can I connect the webcam to the Labview?
    (2)How can I get the color average of paper money?
    (3)How can I make Labview program for releasing different signals which has different releasing time for each color average?

    Hi 박지성,
    you can use the IMAQ for USB Driver. See this link http://zone.ni.com/devzone/cda/epd/p/id/5030. You can also use the integrated windows dll to get your picture.
    Hope it helps.
    Mike

  • How do I lighten up a sequence without loosing color and contrast?

    how do I lighten up a sequence without loosing color and contrast?

    What have you tired so far? Color correction can be a bit of a challenge until you get comfortable with it.
    Also, unless your sequence is one uniform scene, it would probably be better to go on a clip by clip basis to make these adjustments - but here is one quick way to do it for the whole sequence, which may or may not give you the results you are looking for:
    Apply an Adjustment Layer that covers the duration of your sequence.
    Apply the Fast Color Corrector to the Adjustment Layer.
    In the settings for the Fast Color Corrector, bring up the Input Gray level a bit (this will lighten the scene) and raise the Input Black Level (this will help restore some of the contrast). If you need to make the bright portions of the scene brighter, bring down the Input White Level.
    Go slowly with small adjustments and  adjust to taste. You'll need to work back and forth on those controls to get the best compromise.
    If you want more color, increase the Saturation a small amount.
    MtD

  • How can I get the color and contrast on photos to appear the same in Organizer and Editor?

    In PSE 10 (Windows 7), When I edit photos in the Editor and get them the way I want them, they appear considerably different when I send them back to the Organizer, both in color and contrast.  Since I print from the Organizer, they appear in print as they are in the Oganizer, and it's not what I had in the Editor.  I set the color the same in both Editor and Organizer from the Edit menu, but I still have the problem.  Any assistance would be appreciated.  Thanks in advance. 

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • Mail- Images color and contrast?

    Why is it that Apple forgot color management in the Mail program. I am a photographer and I have my images approved by the client via email. Shoot to CaptureOne Pro then Process raw to tiff open in Photoshop and the color and contrast match convert to Jpeg and attach to email and it looks muddy in the email. Clients respond to me image looks flat what is wrong with it. All my clients use Adobe 1998 color space. I have to tell them to open it in photoshop and they always say "Oh thats better"
    Am I missing the option to use Adobe 1998 instead of sRGB in the mail program? Some of my clients use the Jpegs for placement in their layouts so I need to keep the Adobe 1998 color space and not convert it to sRGB just so it will look right in one of a series of programs.

    Why is it that Apple forgot color management in the Mail program.
    I assume because images are sent as attachments which appear inline or viewed in place within the body of the message by default with the Mail.app which is not the same with all email clients.
    If you send such attachments to a recipient using Windows Outlook or Outlook Express, the attachments will appear as attached files only which must be opened separately in order to view.
    I don't believe the majority of people that use the Mail.app need it to be used in such a fashion and I don't believe any email client has anywhere near Photoshop's color management capabilities since this is not what an email client is primarily designed for.

  • My eyes failing, or has Jive been messing with the typographical color and contrast of text?

    Are my eyes failing more egregiously, am I having another one of my increasingly frequent senior moments, or has Jive been messing with the typographical color and contrast of text in the forums?
    For some reason, I'm noticing today a very weak gray text and diminished contrast between text and background?
    Monitors regularly and often calibrated with hardware pucks. 
    I had my eyes checked and new prescription glasses in the last few months, now I wondering what other tests I may need.  Or is it really Jive messing with us again?
    Thanks in advance.

    I hope you have slept well, my friend, and again find the forums to be as pleasurable to use as always.   
    Your screen grab seems exceptionally clear and contrasty to me, when shown at full-size.
    I have personally blocked typekit.com so as to avoid using the Adobe fonts entirely.  That seems to have helped me deal with this place better.
    Here's what Dave sees (his screen grab from above) vs. what I see here (mine's on bottom):
    Latest trouble for me is that for about the past week I have to log in every time I visit, regardless of the selection of [  ] Remember Me.  That's just a little too much trouble to go through to be at this wonderful place.  Sigh.
    -Noel

  • HT4623 hi i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

    hi
    i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

    I switched the usb port and did the whole recovery holding of the buttons ect... And it worked, the computer detected the phone and i was able to click restore. However, the computer says preparing iphone for restore and it is still doing the restarting thing where the apple fades away and then comes back like it is restarting. If i can somehow get past this i will be able to go back to factory settings and resolve my problem, but this is where i am stuck.

  • What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

    Hi Folks,
    Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
    Thank you.

    In case you don't have access to MOS :
    JBOSS : 5.1.2 EAP
    JDK : 1.6.0_38
    ORACLE :
    Oracle Exadata5
    Oracle 10gR2 (10.2.0.3)
    Oracle 10gR2 RAC (10.2.0.3)
    Oracle 11gR2 (11.2.0.2.0)
    Oracle 11gR2 RAC (11.2.0.2.0)

  • Report execution for different variant and Broadcast

    Hi experts,
    i had a situation where i need to broadcast the same report for 100 vendors, but the information in the report will be different and specific to the vendor.
    can i create different variant for each vendor and execute the report at the time in background and broadcast that to the vendors.
    Is it possible for broadcasting the reports at a time
    any idea will be appreciated
    regards

    Hi akshay
    Is it like i can execute the report same time for different variants and broadcast that reports based on  that variant to different vendor
    for eg User  A has to view report with Variant X.
             User B has to view same report with variant Y
    and so on is this possible for us to do at a time
    or need to create different reprots for 100 vendors and broadcast them
    Hope if u have any document for broadcasting that shows the steps to do this can you please share

  • Share Global structure for different module and include

    Hi,
      How can shared the data declaration for different module and include??
    Regards,
    Kit

    Declare your variables in TOP include of the function group.
    a®

  • Latest version available for Oracle Forms and Reports in 11g AS

    Deaer Friends,
    Please let me know latest version available for Oracle Forms and Reports in 11g Application Server and let me know whether it is supported in Windows - 64 Bit Platform
    Regards,
    DB

    DB,
    Oracle Forms and Reports 11g Release 2 (11.1.2) is the most recent forms and reports.
    If you're on 11.1.1.x (for example 11.1.1.5 or 11.1.1.4), please refer to http://docs.oracle.com/cd/E24269_01/doc.11120/e23975/upgrade_from_r1.htm for upgrade procedure.
    Otherwise, if you're installing it brand new, download Oracle Forms and Reports 11gR2 (11.1.2.0.0 from http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html
    HTH,
    Raj Mareddi
    http://www.freeoraclehelp.com

  • Maintaining Price Record for Different Stores and Distribution Centers

    Hi expert
    I want to maintain price condition record for condition type ZPR0 for one article
    for different store and different Distribution Center
    what is t.code and path
    if sales price should copy from purchase price what are setting
    thanks

    Hi Hanumant,
    To do sales pricing
    Goto IMG>Sales & Distribution>Basic Functions>Pricing>Pricing Control
    1. Use condition table 406 Site/article
    2. Define Access Sequences ZPR0
        Enter accesses:10 406 Site/article Exclusive x
    3. Define Condition Types (ZPR0 assign newly defined access sequence)
    4. Define And Assign Pricing Procedures (assign condition types ZPR0..etc. to it)
    Then maintain condition record , go to VK11 --> Enter your Z condition type (eg. ZPR0)., enter the amounts.
    Add the pricing procedure , to sales document type.
    For Retail Sales Pricing based on Purchase pricing you can follow the following method:
    The retail price is always based on the purchase net/net price. This purchase net price is built up from the purchasing pricing elements or condition types defined to be included in the purchase net price. A planned mark-up is applied to the purchase net/net to calculate the proposed retail price. The planned mark-up can be set by merchandise category and for exceptions, more specifically by article.
    You can perform Two-step calculation for retail pricing, for example, for stores that are supplied by a distribution center (internal vendor). Calculating sales prices for the stores is based on the transfer price for distribution centers (preceding organizational unit).
    1. Set up Master Data (WB02) - Relevant Fields should be maintained
    2. Set up Article Master Data - Logistics DC and Store View (MM42)     
    Relevant Fields should be maintained
    3. Maintain Mark up for DC(VK11) -Markup % at Distribution channel distribution chain level
    Mark ups maintained at two levels:
    For DC: At distribution chain level
            Condition type used: AUFS
    For Stores: At article level
         New condition type ZUFS created.
    4. Maintain Mark up for Stores (VK11) Markup % at Store distribution chain level
    5 Create Pricing Procedures (IMG) -Pricing Procedures created
    6. Carry out Price calculation for DC(VKP5) - Pricing Document created - DC Transfer price calculated
    7. Carry out Price calculation for Stores (VKP5) - Pricing Document created - Final Retail Price Calculated
    The final retail price that is calculated is stored in the condition type VKP0.
    Hope it helps,
    Regards,
    Anirban Roy

  • I have a CC student membership for one year, but I can only download trial versions of for example illustrator and indesign (30 days). How do I solve this problem?

    I have a CC student membership for one year, but I can only download trial versions of for example illustrator and indesign (30 days). How do I solve this problem?

    If there is no billing issue,
    Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    If you use Photoshop at all, you may need to install the latest update to resolve this issue. See this blog post for more information:
    http://blogs.adobe.com/crawlspace/2013/01/photoshop-13-0-413-1-2-updat es-now-available.html
    If you do not have Photoshop, then try the solution that others have mentioned previously:
    Open the Adobe Application Manager (AAM).
    If applicable, let AAM complete any automatic updates and restart itself.
    Sign in with your Adobe ID. (Optionally, you can close AAM at this point.)
    Open a CS6 application (e.g. InDesign CC).
    If prompted (e.g. you get the trial screen), click "License This Software" and sign in with your Adobe ID.
    Refer to: Re: Top Ten Questions About Creative Cloud
    creative cloud software says my free trial has expired, but I have a paid subscription
    Regards
    Rajshree

Maybe you are looking for