Badge Scanning

Hi There!
I am new to SAP and to sdn community as well. I had posted the question in SAP Mobile forum and was redirected to this forum.
I believe there are ways of scanning badges embedded with QR codes into SAP (scanning the badge should autofill username and password in SAP GUI) Are there any special requirements on the choice of hardware(scanner) to be integrated with SAP? Also is there a way to disable manual typing of username/pwd on SAP GUI so that authentication is only through scanning. Any information on this regard will be of great help!
Thanks!

Hi Vipin,
I was going through your blog "How to change Payment method in SAP CRM Web Channel". We are using SAP CRM 7.0 B2B and i can create the order in the Webshop.
After entering the product I just click the Order and Order gets created in CRM and gets replicated to ECC as well. In the process i do not even see the payment method as you have explained in your blog.
I think what you have explained in your blog was for WCEM.
I am checking in my Shop Management as shown in the attachment and i do not find option to enable payment method under the Transaction
Whether i should implement the BADI mentioned in the following blog....
http://wiki.scn.sap.com/wiki/display/stage/Payment+cards+in+SAP+CRM+B2B
Your suggestion and small hint should help me to incorporate the same in my current system. Looking forward to your valuable inputs.
Thanks,
Krishna

Similar Messages

HP Officejet - Crooked Scans and PreSet Margins

Scanning: Pages feed through automatic ADF unevenly, causing all the scans to be crooked. I want to be able to scan stacks of documents at a time and do not want to have to straighten every scan. The problem appears to be with the roller that pulls pages through the ADF. There is only one roller and it is positioned in the center of the page, allowing the paper to go askew as it passes through the feeder.
Preset margins: There appears to be no way to override the preset margins of 1/2" on all sides. This prevents me from downloading information from the internet. The printer clips off the top and bottom of each page unless I reduce the documents to 93 - 95%.
I am unable to use Avery Design and Print templates for labels and name badges. The preset margins clip the first and last rows on each sheet. Only about 60% of the badges on a page is usable. Extremely wasteful.

Hi @genibug
I would be happy to help you with your Officejet 7610 printer.
Although I can't change the preset margins, the margin specifications can be found in the following link; Printer Specifications for the HP Officejet 7610 and 7612 Wide Format e-All-in-One Series (H912). The information here might be helpful.
As for the crooked scans, it would be best to use the paper jam troubleshooting steps even though you are not experiencing a jam; An ADF Paper Jam Error Displays on the HP Officejet 7610 Wide Format e-All-in-One Printer Series. This document wil guide you through steps ti inspect and clean the document feeder.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

QR Code Scanning

Hi There!
I am new to SAP and to sdn community as well. Hence please bear with me if this is not the right place for the question below and would appreciate anyone redirecting me to the right forum.
I am looking to see if there are ways in SAP that can scan users for their identity autentication from their physical Badge instead of they typing in their username/pwd each time during the course of day while working with the application. SAP should handle the passwords being encrypted. Any information on this regard will be of great help!
Thanks!

You are in the wrong forum for this question, probably more related to SAP Security or Basis forums. If I understand you correctly then you want to have a QR reading scanner and some custom developed program that takes the information that is on the QR code (username only or also password?) and pass that over to the SAP GUI - Logon screen, signing the user into SAP without the user entering his password. If this is the scenario then I don't believe there is any restriction on the hardware part but passing the logon parameters to the SAP system and logging you in is something that the SAP security or Basis forum people should be able to guide you. Also possible that the abap forum has discussed this type of requirement previously.

Reminder badge count is incorrect

My Reminder badge count shows that I have 4 tasks outstanding - when I have none. This is true for the machine I just upgraded to Yosemite and the one that is also running Mavericks. My iOS devices are fine.
When I go into Reminders and click on the "Task" tab on the left I can see the four tasks (from 2012) - I can mark them as completed - and it ignores the action. I can delete them and it ignores the action. I can change the due date and it ignores the action. The one thing that is different than current tasks is that rather than associated with iCloud tasks it references calendar tasks.
Is there anyway to clear these out?
Thanks

I've been having this same issue for a while on my iPad2. After scanning this post, I decided to start removing items from the misbehaving folder. No change, until I got to Camera Prime (iPhone app). This app does not have any control panel settings for badges, but does have an internal option (by the way, the folder showed the badge number -3). Upon removing the offending app (Camera Prime), the count immediately corrected.
Attempt 1) I opened the app, turned off the badge count (no badge showing on the app by the way), and then put the app back into that folder. Count on the folder dropped by ONE only.
Attempt 2) Deleted the app, reinstalled from the cloud, put it back in the folder. Count drops by ONE. Tried deleting through the control panel (deletes data as well), then reinstalled. No change.
Test1 - Moved the app to a different folder (with a badge count), count reduced by ONE.
Test2 - Moved the app to a different folder with NO badge count. No change.
So I've reduced the effect of the count, but this app (Camera Prime) seems to have a defect that is (perhaps) a default count of -1.
Have not tried resetting the iPad since going through this. Maybe later.
Good luck.

QR codes data merge for delegate badges

Hi
We are creating delegate badges for a event and have 300 names and details we would like to merge into a badge design,
merge fields have been done <Name> and <Company> however the client has requested a qr code that can be scanned to phone and creates a vcard.
i have read the support about data source files, however as a novice to excel, I am not sure how i create the 'csv' so it import and creates a QR code
any help would be very much appreciated

Thanks mike,
I saw these, however the stumbling bloc for me is the csv\excel and how i set that up for a vcard
the post explaining BEGIN:VCARD\nVERSION:2.1, etc...just didn't make sense .........
as reading it, sounds like I would need to do this to each of the delegates manually, which then it is weighing up the time spent doing that or doing each qr code in design, copy and pasting in the fields, either way is far to long!
I'm a creative designer, i do pretty pictures
kind regards
Marcus

Why doesn't my reminders app show a badge?

My reminders app is enabled in the notifications center and "show badge app icon" is enabled but whenever a reminder goes off on my phone no red badge pops up to show me. I was wondering if there was a way to fix this. I'm using ios7.0.2 with iPhone 5s

Passbook keeps things like airline boarding passes, movie tickets, and gift cards all in one place, letting you scan your iPhone or iPod touch to check in for a flight, get into a movie, redeem a coupon, and more.
iOS: Using Passbook - Support - Apple
Apps aren't added to passbook, they can simply interact with it.
Take a look at the Starbucks app. There is probably an option to add your Starbucks card to Passbook.

Problems getting passbook to scan cineworld

I can't get my iphone 5 pasbook app to scan cineworld QR codes . The phone runs version 8.1.2 and when I try to scan a code, (which has the "Add to Passbook badge" below it), it just tells me there is no pass available for the code, whatever that means. I have the Cineworld app on the iphone (which I downloaded after following the "Find Apps for Passbook" box on the Passbook and can't understand why it's not working - I would appreciate any help to make this piece of crap do what it's supposed to do.

Call HP tech support or visit their tech support website.

HP LaserJet Enterprise 500 Color MFP M575 - Can't scan from Windows

We recently purchased and installed an HP LaserJet Enterprise 500 Color MFP M575 to be used as a networked all-in-one solution for a number of offices. I have been able to get it set up on our network and have installed the appropriate drivers on the requested Windows 7 x64 machines, and network printing works perfectly. However, it seems that despite the fancy scanning features available from the all-in-one itself (scan to email, scan to a network folder, etc.), I can't find any way to do an old-fashioned scan from Windows.
I have installed the full software solution available on the driver download page for the device, and while Windows lists the device as a "Multi Function Printer; Scanner" it does not recognize it as an actual scanner. The built-in Windows Fax and Scan simply reports that no scanners are installed. The software installation did not include the HP Solution Center (which I am used to seeing from my experience with various other HP all-in-one devices) or any equivalent for direct scanning. The driver download page for the device does not include any separate scanning drivers, so I can't be certain if they were included with the full installation or exist at all.Some of our staff also use Adobe Acrobat to scan, and even that fails to recognize the MFP as a scanner.
We'll eventually be setting up the device to scan directly to a network folder, but we need a fallback while IT takes their time getting it set up; I can't imagine that the simplest option is not available at all. I must be missing something here, any assistance would be greatly appreciated.
Edit: To add, I also ran the HP Print and Scan Doctor. Interestingly, it reports the device as a printer and only offers to "Fix Printing" without any sort of resolution for my scanning problem.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

Cannot send email from scanned pages

I am having trouble with the updated HP remote app on Ipad, since the update I can scan the pages in, but then cannot send them via email. This is qute important because i work remotley from the office and rely on getting my design drawings in on a nightly basis
please help

cannot send email from scanned pages

Malicious or not? Message popped up: Mozilla security found (something like too much, forget exact word) activity on your computer so it will do a fast scan of system file. With OK button.

I was looking at youtube.com, which always tells me my browser is not supported and recommends I download Firefox, but that is what I was using, so I went to Firefox to check for updates. (I think I also had freecycle.org open.) Then this message popped up in a new page: Mozilla security found (something like "too much", forget exact word) activity on your computer so it will do a fast scan of system file. There was an OK button. The page address was: http://update17.stegner.ce.ms/index.php?Q7Lhl9ShbRxGJXpkM1VLSi4ZE8H4pTedoVPySgeppM3VpC+thEspcFG7qxHgn1pdsC2h5ygPGWI3t5hXqMzL9EQaZZ3J1e3CKXgCb0Qp. I did not click OK but copied the link and closed the window which closed the internet. I have never seen this before and would like to know if it is really Mozilla or possibly something malicious. Thank you.

Good catch. That almost certainly is an invitation to download malware.
There are a lot of infected web sites pushing "fake antivirus" software. If you have any doubts about whether your system might have become infected, you can supplement your regular security software with these two highly regarded scanners:
Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
SUPERAntiSpyware : http://www.superantispyware.com/

Scanned items go to wrong folder

I was scanning old photos and all at once they were sent to a temp folder not in my Adobe Photoshop Elements 9. Does anyone know what got changed?

Check your preference settings.
In the Organizer click Edit à Preferences à Scanner

HP AiO Remote app will not recognize scan and copy function of HP Envy 120

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Replied on: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-AiO-Remote-will-n...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP AiO Remote will not recognize scan and copy function of HP Envy 120 printer

Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

Hi UJKarl, welcome to the HP Forums. You should be able to scan from the HP AIO Remote App on your Envy 120 printer. You probably just need to power cycle the printer, iPad and router to regain proper function.
Turn off your printer with the power button. Power down the iPad by holding the sleep button down until you get the option to 'slide to power off'. Then disconnect the power cord to your router and count to about 10, and then plug it back in. Once the router comes back online, turn the printer on. When the printer comes back online (blue wi-fi light stops blinking), then power the iPad back up. Try again, and it should work.
Let me know how it turns out.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Hp aio remote app on iPhone won't scan to my hp photosmart 7515

hp aio remote app "there was a problem during scanning. check scanner and try again" when using hp photosmart 7515 however this is a new issue the app scanning worked before. Also I can no longer print or scan unless at home and connected to my network

Hello @mbranch37,
Welcome to the HP forums.
I understand that you are having a problem with the AIO app, as well as what sounds like a web services issue.
I would like to help.
Before working with the app, I would like to make sure the printer is fine.
On the front panel of your printer touch the Web Services icon. (also known as the ePrint button)
If you get a server connection error, I would set a manual DNS.
The following post by happytohelp01, has instructions for setting the manual DNS.
If for some reason the printers email or ePrint address has changed, you will have to set it up again.
If the email is the same and you do not get any error messages, try cycling your network.
Turn off the printer and other network devices.
Unplug the power to your router for at least a minute.
Plug the power cord back into the router.
Turn on all your network devices.
Wait until the blue wireless light on your printer stops blinking.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

AiO Remote iOS app -scanning A4

I have a Photosmart 5515 All in One printer and have been using the iOS app AiO Remote app to scan in some A4 pages. I set the app to scan to a document and also the page size to A4. Looking at the resultant document it has scaled the the document down. It has centralised the document but you end up with margins of a couple of inches all round.
Has anyone else noticed this?
Does anyone know how to overcome this?

Hi Rturner003,
Welcome to the HP Support forums. I understand that you are encountering difficulties when scanning A4 documents with HP's All-in-One Printer Remote app.
I did some testing on this with an iPad and 3 different ePrint capable printers and each time I was able to recreate it. However that doesn't mean we are kippered. I have included a link to a post on the forums and the key part for you to get your A4 scanned document to print the document as you require, please follow step 3 after you have scanned the image. The key is to pinch the image to the size you would like.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Badge Scanning

Similar Messages

Maybe you are looking for