BADI ADDRESS_CHECK from webclient

I have already carried out a BADI implementation, for the ADDRESS_CHECK. Which works fine for BP transaction.
As per requirement it also needs to be exectuted from IC webclient. However, it could not triggered by using IC webclient.
Is there any way to resolve it.

Hi,
Put an external breakpoint and debug, if it is not being triggered then use some other BADI.
Thanks,
Shobhit

Similar Messages

How do I delete a bad email from iCloud so it will stop showing up?

I followed the instructions to remove a bad email from my email on my macair but it won't go away. I think that stupid icloud won't let me get rid of anything and it drives me nuts. Every time I try to send an email to the correct address, the wrong one keeps popping up. There should be a way to permanently remove something you want removed (unlike iPhone that removes everything you don't want removed). May have to go back to pc world -- apple lacks logical apps.

You mean that it's auto-completing the address incorrectly? Go to 'Previous Recipients' from the 'Window' menu and delete the address from the list. (This is in Mail 4.6, I don't know if it's the same in later versions.)

HT204022 When a photo that is included in photo stream is deleted from cameraroll it should ask whether we want to delete it from photostream too, shouldn't it? How do I delete a bad photo from camera roll and photo stream? I have to delete it twice???

80% percent of photos we take are bad photos, we delete them later when reviewing them. Now the photos are in both camerroll and photostrean. When we delete them from the camera roll they do not get deleted from photo stream, when I delete them from photo stream they do not get deleted from camera roll.
I want to keep good photos only in both photo stream and camera roll. How do I do it? Delete them twice?? What a waste of time.
When a photo is deleted from camera roll it should ask whether we want to delete it from photo stream too. Otherwise photo stream is useless.I remove bad photos from camera roll but they all stay in the photo stream ...

Hi JM,
Even 20 days later, the answer is the same.....you have to delete photos from them individually - they are kept in separate places, so you have to delete them from both if you don't want them. However, photostream will, eventually, "delete" the bad photos, since it only keeps up to 1000, and then starts overlaying the oldest ones....
Sorry....
GB

BADi called from transaction FB60

Hi all
I am looking for a BADi called from transaction FB60 in ECC 6.0. This is needed due to the fact we will develope a solution where we transfer the cost from an invoice booked to an intern order and transfer the cost and currency to CRM 7.0. Please if there is anybody who know a Badi that is triggered when the transaction FB60 is Saved, it will be very help full to us.
Best Regards
Camilla

Hi,
Re: Need user exit or BADI for FB60
Best regards, Christian

Solaris 10 SNMP SMA error: community_check() : bad community from localhost

I enabled SMA SNMP on my Solaris 10 servers (SunOS 5.10 on i86pc) and now i receive a lot of errormessages in my logs with the following message:
Oct 13 09:57:41 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost
Oct 13 09:57:41 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] session_open() failed for a pdu received from localhost.32923
Oct 13 09:57:42 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost
Oct 13 09:57:42 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] session_open() failed for a pdu received from localhost.32923
Oct 13 09:57:43 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] community_check() : bad community from localhost
Oct 13 09:57:43 area3 /usr/lib/snmp/snmpdx: [ID 702911 daemon.error] session_open() failed for a pdu received from localhost.32923
i searched the internet but it seems that this error should be resolved in my Solaris version.
How can i resolve this error?

Hi,
Welcome to oracle forums :)
Refer links:
http://forums.sun.com/thread.jspa?threadID=5065724
http://www.sunmanagers.org/pipermail/sunmanagers/2006-November/042435.html
http://unix.derkeiler.com/Newsgroups/comp.unix.solaris/2004-07/0089.html
Hope helps
Regards,
X A H E E R

Flash gets bad reputation from lazy programmers

Hi all
I would just like to say Flash gets a bad reputation from
lazy programmers. I talk about flash with friends and they say
'Flash is to costly to bandwidth' or 'Flash files are to big for
the net' or 'I hate preloaders they take too long'.
I've learned that Vector graphics are the most efficient way
to display images on the net. People are loading unnecessary PNG,
JPEG or bitmaps in flash movies. Often they do not even optimize
the images. Even further they do not allow their Flash movies to
print the images to a printer. So why do lazy programmers do this?
I have created a site using Flash elements to illustrate the
content, and this is the most efficient method there is on the net.
Flash Vector graphics are faster, cheaper and better than the other
formats. If I have to hear another person complain about Flash
again!
Vector Graphics
driven site
regards
John
www.javono.com

I have to agree that Flash drawn graphics can provide a
substantial efficiency and clarity. I will use them whenever the
opportunity presents itself. But I don't think lazy programmers are
responsible for any sort of bad reputation that Flash might have...
I haven't heard that it has one.
At one end, programmers are just that, programmers, not
graphic artists, and they have to rely on others to create graphic
elements for them. And while Flash can be used to create some nice
drawings it does not have all of the features and capabilities that
software created for drawing has to offer, so graphics people are
more prone to use such software, it's what they are trained in,
which is why Flash often ends up with jpeg and png files. And alot
of web-based content utilizes complex imagery such as photographs,
3D renderings, and video... which Flash vector drawing cannot be
used to recreate.
And on the other end are those that use Flash almost solely
for animations and have little to no programming skills nor need
for any.
One of the nice things Flash does, which some of your friends
apparently take exception to, is provide preloading capability. Not
all of the preloading you see is always what lives in a flash file,
a good portion of that preloading could be image content and other
media that is dynamically brought into play later on. A very small
Flash file can end up presenting a very large amount of content
this way. Sure, in this microwave oven world we live in, nobody
likes a long wait, but I think it's better to wait the one time up
front than to have to wait every time some new piece needs to be
flown in from a server like your average web page often makes you
do.
You're not likely to find an anti-Flash attitude popping up
much in these forums... the folks that come here a usually those
who have fallen under its spell and seek to enhance their abilities
to use it.

HT201272 used 2 days for download 1 magazine, it has been bad service from AIS ebook app and Matichon app.(download on high speed internet)

used 2 days for download 1 magazine, it has been bad service from AIS ebook app and Matichon app.(download on high speed internet)

iOS 6 came out a couple of days ago, so Apple's servers have probably been busy as a result of people downloading it

BADI Address_check

Hi experts,
I have a requirement in which if there is any change/add the address of the partner details in VA01/VA02 I needed to implement one logic. But to implement that logic I need the order type and partner type details .
Example if I change the address of shipment for the order type. Then I needed the partner Sh and order OR for my logic.
I have found that Badi Address_check helps in this case to implement my logic if any change/add address.
But only constraint is I will not get the partner type and order type.
So kindly let me know if there is any BAdi before this BAdi which can give the partner type and order type of the address change.
Thanks in advance,
Regards,
Vineeth

Hi,
go to transaction SE19
create
Implementation name ZADDRESS_CHECK
Active
Implementation short text Address validation
Definition name ADDRESS_CHECK
Interface name IF_EX_ADDRESS_CHECK
Name of implementing class: ZCL_IM_ADDRESSCHECK
Method Description
IS_ACTIVE_FOR_COUNTRY Determines whether there is a check for the
ADDRESS_POSTAL_CHECK Postal address check
IF_EX_ADDRESS_CHECK~ADDRESS_POSTAL_CHECK should be implemented and active.
you remember it can be check triggers when you enter on postal code field of address transactions
i think it will helpful for you.

BADI ADDRESS_CHECK implementation

I am trying to implement Badi ADDRESS_CHECK to validate address using regional structure .But in SE19 during implementation when i click on methods ' IS_ACTIVE_FOR_COUNTRY & ADDRESS_POSTAL_CHECK'
to maintain the ABAP code..it is throwing a message like " specify filter types ".
Can any one suggest me how to set filter to this BADI .
Thanks & Regards,
Rahul D

On se19 screen>attributes tab>in below selection screen TYPE add an new row>and put in ISO CODE as IN>Save.

How can I purge a bad address from iPad Mail?

I have entered a bad address for my husband, thinking it was his correct e-mail address. I finally figured out it was wrong(there was an extra letter in it) and I changed it in contacts to correct it(Mobile Me corrected it on all my devices).
Now when I type in his name to send him an e-mail, iPad keeps wanting to send it to the old incorrect address, instead of the corrected address shown in contacts. Please tell me how I can purge the incorrect address from the mail program.

The more times that you use the correct email address, the sooner the correct address should come up as the first option in the list. Still can't delete it, but eventually the correct address should pop up as the first option over the incorrect address.

How to call a badi implementaion from report program

Hi ABAP Guru,
I have ZBADI_FALLBACK_DEF new badi created by me and there two implementation ZBADI_FALLBACK_IMP and ZBADI_FALLBACK_IMP1
Now I am calling this badi from report program
DATA:
W_HANDLE TYPE REF TO ZBADI_FALLBACK_DEF.
* GET BADI - for getting objects..................
GET BADI W_HANDLE.
* CALL BADI - for calling interface methods.
CALL BADI W_HANDLE->ADD.
This is fine,,,
But I want to call only one implementaion ZBADI_FALLBACK_IMP.But here two implementaion is called.Please help....

Hi Palash,
Then you create filter BADI and use filter in implementation.
While getting BADI reference use filter
GET BADI W_HANDLE FILTERS
Thanks & Regards,
Arun

Bad information from call centre.

Phoned to get BT mobile as the signal at home is bad I asked if I used BT Smart-talk would the calls come from my mobile minutes allowance and was told they did. So I requested the £12 package with 500 minutes and stopped the Anytime calls on my landline number as 500 minutes a month is more than enough for me.
When I came to setup my new phone I found calls using Smart talk were charged to my landline number not taken from my mobile minutes.
Luckily I was able to downgrade to the £5 mobile package for the next month and restore Anytime calls on my landline having wasted£ £7 on this months package
Phoneing over wifi is becoming common where like in our house there is very very poor mobile reception and on Three Mobile the call comes out of your minutes allowance or at the normal call rate where as using Smarttalk you are charged at BT landline to mobile rates.
I hope BT pull their socks up or I'll be thinking of changing next year.

imjolly wrote:
at present the only people doing wifi calling as you describe are EE and only for iphone so may be a while before BT mobile have the facility - unless the other operators follow EE and it does become common place
Just for info. EE also now do WIFI calling on certain other handsets, like Galaxy S5 and S6 and some others. These handsets must have been purchased direct from EE. ie: no good purchasing the phone from C/warehouse or others and joining the EE network because it wont work .
Iphone will work wherever you purchase it from, just needs iOS 8.3
toekneem
http://www.no2nuisancecalls.net
(EASBF)

INVITE with display-name="" in Contact header- 400 Bad request from occas

Hi,
When a UAC sends an INVITE to OCCAS
with the Contact header in the form :
Contact: "" <sip:user@domain>
OCCAS rejects the message with 400 Bad request.
The problem comes from display-name = ""
(proven easily with sipp)
In the 400 response : X-Bad-Request: Illegal header "Contact"
It seems that the string "" as display name should be allowed according to rfc 3261:
display-name = *(token LWS)/ quoted-string
quoted-string = SWS DQUOTE *(qdtext / quoted-pair ) DQUOTE
qdtext = LWS / %x21 / %x23-5B / %x5D-7E/ UTF8-NONASCII
quoted-pair = "\" (%x00-09 / %x0B-0C / %x0E-7F)
Has anyone encountered the problem?
regards
Christophe

Hi LJ, you may want to post over on the new My Oracle Support Communications Community which is moderated by and responded to by Oracle Support and accessible by Oracle customers. Many new features will be developed for the Community in the coming months, please come and check it out at https://metalink.oracle.com/CSP/ui/index.html
Regards
Graham

While working on BADI coping from PR to PO, it's not triggering

Hi,
I am working on BADI to get one field VENDOR MATERIAL NO to get displayed in PO while coping from PR to PO in IDES version.
I have created PR and based on that PR, I want to create PO but one particular field VENDOR MATERIAL NO is not copied from PR to PO.
I have used on BADI ...ME_PROCESS_PO_CUST and Method is PROCESS_HEADER.
I have used this below code
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_HEADER.
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_HEADER.
    DATA: po_items TYPE purchase_order_items,
    po_item_obj TYPE purchase_order_item,
    lv_BANFN type eban-banfn,
    lv_BNFPO type eban-bnfpo,
    lv_idnlf type eban-idnlf,
    po_item TYPE mepoitem.
*-Get All Line Items
    po_items = im_header->get_items( ).
*-Set vendor material no For Each Line Item
    LOOP AT po_items INTO po_item_obj.
      po_item = po_item_obj-item->get_data( ).
Get the Vendor Material Number
      SELECT SINGLE
      BANFN
      BNFPO
      idnlf
      FROM EBAN
      into (lv_BANFN , lv_BNFPO , lv_idnlf)
      WHERE BANFN = po_item-BANFN
      AND BNFPO = po_item-BNFPO.
      if sy-subrc EQ 0.
        po_item-idnlf = lv_idnlf.
        po_item_obj-item->set_data( po_item ).
        clear: lv_BANFN,
        lv_BNFPO,
        lv_idnlf.
      endif.
    ENDLOOP.
endmethod.                    "IF_EX_ME_PROCESS_PO_CUST~PROCESS_HEADER
endmethod.                    "IF_EX_ME_PROCESS_PO_CUST~PROCESS_HEADER
But this BADI not getting trigerred in IDES... ECC6.
So can any one help me on this
Waiting for quick response.
Best Regards,
BDP

Dear Jürgen,
Thanks for the prompt revert. I create a PR by using the ME51N and later create a PO via ME21N with reference to the PR. After I drag and drop the PR into the basket (PO screen), subsequently, the system ask me to fill up all the information again about the account assignment. I tested with other account assignment category, such as "K", it is able to copy the reference (PR's account assignment information) to the PO without any problem.
Thank you.
Regards,
Edwin

Bad SQL from 2.3.4 (and 2.3.2)

Hi guys,
In the Maine Lighthouse Rental app for my book, there are a total of 48 Rental records. To start
with, all rentals are available. Mary reserves one rental. Subsequently a search for all of Mary's
reservations and all available records, returns 95 rental references in the result collection
instead of 48. The problem arises from bad sql generated by Kodo 2.3.2 and 2.3.4.
This particular query can be fixed in two ways, but I'm not sure about the general mapping issues.
One, SELECT DISTINCT will fix it. Two, dropping the CUSTOMERX table from the query and changing the
first AND clause from:
WHERE (((t1.JDOIDX = 1351 AND t0.CUSTOMERX = t1.JDOIDX)
OR (t0.CUSTOMERX IS NULL))
to
WHERE (t0.CUSTOMERX = 1351
OR t0.CUSTOMERX IS NULL)
Code and generated SQL are below.
Hope this helps.
David Ezzio
---- query setup -------------
// set up query for customer's rentals and available rentals
Extent extent = pm.getExtent(Rental.class, false);
queryCustomerAndAvailableRentals = pm.newQuery(extent, "customer == c || customer == null");
queryCustomerAndAvailableRentals.declareParameters("Customer c");
queryCustomerAndAvailableRentals.setOrdering("week.startDate ascending, lighthouse.name ascending");
----- generated SQL -------
[ C:1923370; S:1238221; T:700575; D:10/22/02 3:48 PM ]
SELECT
t0.JDOIDX,
t0.JDOCLASSX,
t0.JDOLOCKX,
t0.CUSTOMERX,
t0.LIGHTHOUSEX,
t0.PRICEX,
t0.WEEKX,
t2.STARTDATEX,
t3.NAMEX
FROM
CUSTOMERX t1,
LIGHTHOUSEX t3,
RENTALX t0,
WEEKX t2
WHERE (((t1.JDOIDX = 1351 AND t0.CUSTOMERX = t1.JDOIDX)
OR (t0.CUSTOMERX IS NULL))
AND t0.LIGHTHOUSEX = t3.JDOIDX
AND t0.WEEKX = t2.JDOIDX)
ORDER BY
t2.STARTDATEX ASC,
t3.NAMEX ASC

SQL*Net 2.3.4 was shipped along 8.0 products:
* SQL*Plus
* ORACLE NET8 PRODUCTS
* ORACLE NETWORKING PRODUCTS (SQL*NET 2.3.4)
* ORACLE 8 JDBC DRIVERS
This is not supported to connect against a 10g database. The last valid combination was 8.0.6 vs 9.2.0
~ Madrid.

BADI ADDRESS_CHECK from webclient

Similar Messages

Maybe you are looking for