BAdi at Leave Modification Request

Hi,
Is there any standrad BADi which gets triggered during leave request modification prior to approval?
Regards
Partha

Hi Tajuddin,
Could you please specify for what reason this BADi is used? I require a BADI which updates the leave prior to sending it for approval.
Regards
Partha

Similar Messages

  • User exit  or BADI to validate service request value with PO value

    Dear gurus,
    Is there any userexit or BADI to validate service request value with PO value. Please help me regarding this.
    Thanks in advance

    Hi,
    Please check these enhancements (SMOD) for user exits available of transaction ML81N.
    SRV_FRM  - SRV: Formula calculation (obsolete since 4.0A!)             
    SRVSEL   - Service selection from non-SAP systems                      
    SRVREL   - Changes to comm. structure for release of entry sheet       
    SRVQUOT  - Service export/import for inquiry/quotations                
    SRVPOWEB - Purchase order for service entry in Web                     
    SRVMSTLV - Conversion of data during importing of standard service cat.
    SRVMAIL1 - Processing of mail before generation of sheet               
    SRVLIMIT - Limit check                                                 
    SRVKNTTP - Setting the account assgnmt category when reading in, if "U"
    SRVEUSCR - User screen on entry sheet tabstrip                         
    SRVESSR  - Set entry sheet header data                                 
    SRVESLL  - Service line checks                                         
    SRVESKN  - Set account assignment in service line                      
    SRVESI   - Data conversion entry sheet interface                       
    SRVENTRY - Unplanned part of entry sheet (obsolete since Rel. 3.1G)    
    SRVEDIT  - Service list control maintenance/display)                  
    SRVDET    - User screen on tab strip of service detail screen           
    INTERFAC  - Interface for data transfer                      
    Regards,
    Ferry Lianto

  • Transport-Leave Transport request in queue for Later import

    Dears,
    I want that U0 mode i.e. Leave Transport request in queue for Later import should always be selected by default while importing any transport.
    Please suggest,How it can be done.
    Shivam

    Shivam,
    Please check the attached link.
    [http://help.sap.com/saphelp_nw04/helpdata/en/3d/ad5b814ebc11d182bf0000e829fbfe/content.htm]
    Sample Syntax
    tp import T11k904711 P11 U0
    Hope this helps.
    Manoj
    Edited by: Manoj Chintawar on Mar 20, 2009 11:55 AM

  • Is it bad to leave your iPhone connected to the charger constantly?

    I was looking at buying the Mophie juice pack plus and was seeing if it was bad to leave the mophie running while my iphone is fully charged.

    Battery life for your iPhone
    For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

  • Http-404   HTTP-400 Bad name in the request: not a legal PLSQ

    Hi All,
    I have apex 3.1.0.00.32 installed on solaris 10g R2. I didnt make any changes to a page which is based on report/query.
    When I modify the records I get the above error page not found HTTP 404
    When I check the apache logs I see
    mod_plsql: /pls/apex/src= HTTP-400 Bad name in the request: not a legal PLSQL identifer
    Any hints on this?
    thanks
    Rajesh

    Rajesh,
    When I modify the records
    Modify records how? Using what tool? What to you mean by "When"? Do you mean "after" modifying records you run the report and get the error or do you mean "in the process of" modifying records using a control in your application? What kind of report is this? Can you show us on apex.oracle.com?
    Scott

  • Is it bad to leave your iphone 5 charging all night?

    Is it bad to leave your iphone 5 charging all night?

    Not at all...
    http://www.apple.com/batteries/iphone.html

  • Request failing due to 'WARNING: Header modification request was rejected.'

    Why commandButton navigation inside a pageTemplate throws
    WARNING: Header modification request was rejected. Because the setter method was called from included servlet. It is restricted by SRV.8.3 of Servlet Specification 2.4. : current-workspace-app?When the same commandButton logic is outside pageTemplate it works fine.How to overcome this?

    why i dont know, but when i call the any page on my application. On the log view, this warn appearing.

  • Is it bad to leave ipod in the dock

    I have a Belkin dock that connects to my receiver. It also charges my ipod. Is it bad to leave it in the dock for extended periods? Afraid of battery issues etc.

    No.  That should be just fine.  See this article for more details and information regarding your iPod's battery.
    http://support.apple.com/kb/TA26689
    B-rock

  • Leave Deletion requests get auto-approved

    Hi,
    If an approved leave is deleted in calendar view then it does not go for approval to manager. Instead it gets deleted immediately
    What is the reason for this ? Std behaviour is required that the deleted leave should appear in red color and when manager approves it, it should be deleted and turned to white color in the calender to indicate that the leave is deleted.
    kindly help
    thanks
    b

    Hi B,
    I think it depends on the leave you mentioned posted or not.
    As far as I know the flow of leave approval is look like this:
    1) User submit leave request
    2) Approver approve
    3) Schedule job post approved leave to ERP
    It is marked as approved in both stage 2 and 3, but if the leave is still at stage 2, user can delete the leave without approval, while approval is required at stage 3.
    Regards
    Bill

  • How to raise role creation/modification request in AC 10

    We are implementing AC10. I have issue more related to the process followed than technical. Please suggest from your experience.
    We found that we can raise the request for new user account, role assignment to user, etc in Acess Request(formerly CUP), but we cannot raise the request for role creation, role modification. This is directly done in Role management.  My question is, how the security admin will recieve the requests for creating or maintaining the roles. Is it necessary to use ticketing tool for users to raise the request for role creation and modification.
    Thanks everyone for your valuable solutions.

    Dear Ashish,
    Whatever you have mentioned is correct to have the common platform for every request, either for user creation or role creation.
    But what we decided earlier, that the end users can raise the request in CUP directly, rather than involving security admin. But after realizing that there is no request type for role creation, I think we have to use our ticketing tool as a common platform.
    Request will come to security admin from the ticketing tool and than he will create the request in CUP, thereafter it will follow the approval workflow.  Only problem I see in this, it goes to the manager twice, once in ticketing tool and than through CUP workflow. i think we need to take out the manager stage from the workflow.

  • Is it bad to leave isight on?

    I have looked everywhere for this answer all over the boards, couldn't find it, so I'm asking. Does anyone know if it is a bad thing to leave your isight camera on? Like I mean for extended periods of time, like ever time the screen saver goes up or what not. Please help, thanks!

    Hi all readers
    Other than Answered helpful and actual posts supplying an answer that works for you can be marked with the Stars.
    Hint time.
    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    Alternatively, you can change the status to Answered.
    If we use the forums properly they will work well...
    7:20 PM Saturday; December 16, 2006

  • BAdI that checks a request on import

    Hi
    I know that in BAdI definition CTS_REQUEST_CHECK there is a method that allows me to check a request when I release it. What I need is a method that allows me to check a request when I import it.
    Does such a method exist?
    Regards Anders

    Hello Anders
    A previous colleague of mine did some nice work on the BAdI CTS_EXPORT_FEEBACK which does not match your request but may be of interest anyway:
    [Writing to the transport log (CTS_EXPORT_FEEBACK-FEEDBACK_AFTER_EXPORT)|Writing to the transport log (CTS_EXPORT_FEEBACK-FEEDBACK_AFTER_EXPORT);
    If I remember correctly all feedback during the export was executed by the DDIC user in client 000. Not sure about the import feedback an whether there is a difference between workbench and customizing requests.
    Regards,
      Uwe

  • Bad to leave backlight off?

    I was just wondering.. I use my iBook alot with the vga adapter & a dell display.. when I have my iBook half closed while doing this, is it better to keep the backlight off or on.. or does it make no difference? I've been keeping it off while it's not in use and I just wanted to know if keeping it off for prolonged periods of time is bad for the iBook's display. Thanks alot

    Hi Patrick,
    Are you talking about the "burn in" effect? That is most commonly known with the CRT displays. Leaving your screen on should only cause problems with causing the computer to over heat. I don't think that it will effect the screen.
    I hope that helps,
    Jon

  • How to collect BADI implementation to transport request

    Hi Gurus,
    I have implemented BADi. I want collect it to a transport request. How to collect BADI and implemented class.
    Any help greatly appreciated.
    Best Regards,
    Reddy.

    Hi,
    Goto transaction SE19.
    Enter the badi name
    click goto=> Object Directory entry
    Enter the package name instead of $TMP
    Click on SAVE.
    It will ask for transport. Enter the TR number.
    Best regards,
    Prashant

  • Bad to leave the nano always fully charged?

    Is it a bad idea to leave my nano always fully charged? The reason I ask is because I sometimes go many days without using my nano. Should I leave it charged in the dock often?

    This ir really a battery question, so what you might want to do is research how to best utilize Lithium ion batteries. Or go to www.iLounge.com and download their free iPod book. Lots of helpful hints including a section on batteries.
    This question isn't limited to Li-on batteries either. Concerns with any rechargable will spark a comment or an out-right debate. Ultimately it's your call on the recommendations provided.

Maybe you are looking for