BADI - CRM_CUSTOMER_I_BADI - IN SOLUTION MANAGER OF SAP.

Hi Friends,
  I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
But i want how to add custom tab in which item details were to be attached.
i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
Thanks a lot in advance.
Thanks
Ravi.

Hello Debasis,
Would suggest to debug. Just set the break point in the BADi and wait if it stops at the BADi. All you need is to call the BADi before calling the save FM, or call the BADi from the save event.
This blog may help you
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Award points if this helps.
Regards,
Martin Kuma

Similar Messages

  • Solution manager For SAP PI monitoring

    Hello All,
    Can you please explain me how to use Solution manager in SAP Netweaver PI monitoring ?
    Please point me to any diagrams that can make me understand better.
    Thanks & Regards,
    Sita

    Hi
    Please check the below guides
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd1603-6761-2b10-f0bf-8dd799ef7263?quicklink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd1603-6761-2b10-f0bf-8dd799ef7263?quicklink=index&overridelayout=true]
    [Monitoring SAP PI 7.1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d05c14c3-34af-2b10-a1b1-fa2a39e0d2ae?quicklink=index&overridelayout=true]
    and more specific INTERFACE MONITORING SET UP GUIDE under
    https://service.sap.com/bpm --> Media Library --> Technical Information this gives details about how to use PI monitoring with Business Process Monitoring  and explains the automated alert monitoring of all interface technologies like IDOC, qRFC, tRFC.....
    Please check
    Thanks
    Jansi

  • Role of Solution Manager in SAP Security.

    Hi
    Can anyone help me to understant the role of SAP Solution Manager in SAP Security.   Link to any relevant document is appreciated.
    Thanks you all.

    Hi,
    First understand and decide what each consultant is going to do in the system. Like Technical Consultant will take care of Installation, Setting Up Landscape, Setting up TMS etc.
    Project Manager will create projects, Handle roadmaps etc.
    Segregating this way will help you defining the Roles in the system. I would also suggest you to have authorization Matrix in a Spreadsheet.
    The authorization can also be categorized based on Operational processing.
    Check this link.
    http://help.sap.com/saphelp_sm40/helpdata/en/24/c7baad86044eacb7203cdd341211a9/content.htm
    For authorization in Servicedesk.
    Check page 35 in this link.
    https://websmp207.sap-ag.de/~sapidb/011000358700001197002005E/Addtional_Information.pdf
    http://help.sap.com/saphelp_nw2004s/helpdata/en/52/6714a9439b11d1896f0000e8322d00/content.htm
    Rewads point if help ful
    Thanks
    Pankaj Kumar

  • Solution Manager and SAP ECC on same server

    Hi Experts,
    I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
    But can I use same mount folders?
    Kindly highlight your experience and knowledge on this point?
    Thank you so much
    Regards,
    LuongDK

    >
    LuongDK wrote:
    > Hi Experts,
    >
    > I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
    > But can I use same mount folders?
    >
    > Kindly highlight your experience and knowledge on this point?
    >
    > Thank you so much
    > Regards,
    > LuongDK
    Hello LuongDK,
    Please refer to the FAQ section on http://service.sap.com/solutionmanager, Check the installations section:
    Which system should I use to install SAP Solution Manager?
    The system has to be dedicated to the SAP Solution Manager. No other components can be installed on top of SAP Solution Manager.
    SAP Solution Manager does not necessarily require separate hardware. It can be installed as a separate instance on an existing hardware.
    This means that the hardware can be shared if it is sufficient to support 2 systems. However a MCOD option is not recommended at all.
    Regards
    Amit

  • SAP XI scenarios (SAP Solution Manager and SAP ECC 6.0)

    Hi!
    I have a SAP Solution Manager System 7.0 (ABAP+Java) and SAP IDES ECC 6.0 (ABAP).
    Futhermore I have SAP NetWeaver 7.0 with SAP XI 7.0.
    Which scenarios can I implement with these systems and where can I find the appropriate documentation?
    - Proxy to Proxy
    - IDOC/ALE
    - Webserice
    - other scnenarios (???)
    Thank you very much!
    regards
    Holger

    Hi Holger,
    Please do search in SDN you might get more.......
    Proxy to Proxy
    ABAP Proxies in XI(Client Proxy) - ABAP Proxy to File
    File to R/3 via ABAP Proxy - File to ABAP Proxy
    IDOC/ALE
    Introduction to IDoc-XI-File scenario and complete walk through for starters. - IDoc to File
    Few other scenarios :
    File to R/3 via ABAP Proxy - File to ABAP Proxy
    Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1) - File to File Part 1
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2) - File to File Part 2
    Convert any flat file to any Idoc-Java Mapping - Any flat file to any Idoc
    RFC Scenario using BPM --Starter Kit - File to RFC
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
    Dynamic File Name using XI 3.0 SP12 Part - I - Dynamic File Name Part 1
    Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II - Dynamic File Name Part 2
    The specified item was not found. - Dynamic Mail Address
    Understanding message flow in XI - Message Flow in XI
    Walkthrough with BPM - Walk through BPM
    Schedule Your BPM - Schedule BPM
    Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
    The specified item was not found. - Maintain RFC destination centrally
    Triggering e-Mails to Shared folders of SAP IS-U - Triggering Email from folder
    Outbound Idoc's - Work around using "Party"? - Handling different partners for IDoc
    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
    The specified item was not found. - Testing of integration process
    The specified item was not found. - Authorization in XI
    http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
    The specified item was not found. - Alert Configuration
    The specified item was not found. - Trouble shoot alert config
    Executing Unix shell script using Operating System Command in XI - Call UNIX Shell Script
    Overview of Transition from Dev to QA in XI - Transport in XI
    Using ABAP XSLT Extensions for XI Mapping - Using ABAP XSLT Extensions for XI Mapping
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
    IDOCs (Multiple Types) Collection in BPM - Collection of IDoc to Single File
    XI : Controlling access to Sensitive Interfaces - Controlling access to Sensitive Interfaces
    The specified item was not found. - The same filename from a sender to a receiver file adapter - SP14
    Payload Based Message Search in XI30 using Trex Engine - Payload Based Message Search in XI30 using Trex Engine XI : Configuring CCMS Monitoring for XI- Part I - XI : Configuring CCMS Monitoring for XI- Part I
    The specified item was not found. - XI: HTML e-mails from the receiver mail adapter
    Thanks
    Prabhakar

  • Upgrade CRM 3.0 to CRM 5.0 -Is solution manager by SAP required?

    Hello CRM gurus,
    We are currently running on CRM version 3.0 and planning an upgrade to CRM 5.0.
    Is solution manager absolutely required for this upgrade. I know that SAP heighly recommends it but is it absoutely required.
    Also, could you please give me few inputs if you did the upgrade with/without the solution manager?
    Thanks for your inputs,
    Prasoon

    Hi Prasoon,
    in the <a href="http://service.sap.com/~sapidb/011000358700005413872005E">CRM 5.0 Upgrade Master Guide</a> I found this:
    "Use of SAP Solution Manager is mandatory for mySAP CRM 2005. When you install SAP CRM 5.0 ABAP server or upgrade to this release, you are asked to enter a key generated by the Solution Manager. For more information, see the installation or upgrade guide for SAP CRM 5.0."
    Regards
    Gregor

  • SAP Solution Manager and SAP Production Server on Single Host

    We are rolling out our new infrastructure using high end Solaris Servers that have plenty of grunt.
    I am looking at running SAP Solution Manager 7 and SAP Netweaver 6 on the same HOST using two Oracle databases.
    We will use 10g and have 2 separate  transport volumes for transports. The Development and test environments will be very similar.
    Appreciate any advise or thoughts. We are not looking at virtualising this particular environment.

    Technically you can do that - yes. I could also imagine in installing the ERP on the bare metal and the SolMan in a zone, together with a processor set you can limit resource usage and you´re totally isolated from your production environment and will so make sure that SolMan is not stealing necessary resources from your production environment.
    Markus

  • Solution Manager for SAP BI

    I have to use solution manager for an SAP BI/BW implementation. The BW client is currently in SAPERP 2005 (ECC 6.0). Is is possible to use solution manager in the same system or should the BI/BW be implemented in NetWeaver for implementing solution manager.
    Thanks,
    Neha.

    Hi Neha,
    I am not sure, whether I understand your question correctly.
    - SAP ERP 2005 (ECC 6.0) and SAP Solution Manager 4.0 are separate installations, each will get their own system id.
    They might share the same hardware, depending on your hardware capacity.
    Best regards,
    Ruediger

  • Solution Manager for SAP BI/BW

    I have to use solution manager for an SAP BI/BW implementation. The BW client is currently in SAPERP 2005 (ECC 6.0). Is is possible to use solution manager in the same system or should the BI/BW be implemented in NetWeaver for implementing solution manager.
    Thanks,
    Neha.

    Hi Neha,
    I am not sure, whether I understand your question correctly.
    - SAP ERP 2005 (ECC 6.0) and SAP Solution Manager 4.0 are separate installations, each will get their own system id.
    They might share the same hardware, depending on your hardware capacity.
    Best regards,
    Ruediger

  • Prepare Solution Manager for SAP services (EWA/GLC)

    Hi,
         I have installed a Solution Manager and I request a EWA alert in the market place for some systems that I have in production... for the exercises I need to have the Solution Manager connected to the systems.. how can I do that?? What are the steps?
    Thanks a lot for your help!!

    Hi,
         Thanks for your information people but kourosh, when I try to access the link I receive this message: The page you were trying to reach does not exist. You may want to try a search, or browse the site to find the page you were looking for.
    Shitij, the page that you give me present me a search web page that is not working too.
    I execute the report RTCtool in all the system and are ready for the service but I don't know how to configure the Solution Manager system to connect it to the other systems for the SAP exercises...
    Some idea of how can I do that?

  • Accessing Document URL in SAP Solution Manager from SAP R/3 using BAPI

    I want to access the hyperlink corresponding to a document present in Solution Manager from another system (i.e SAP R/3). The hyperlink can be generated manually by clicking on the button "Generate" present in Solution Manager. Can anyone please help me advising any BAPI to generate this hyperlink, or any standard function module for generated such a hyperlink used in Solution Manager so that I can define a custom BAPI.
    Thanks in advance!

    Hi Alvaro Hernán Rojas R ,
    The product line is the hierarchy of the finished goods.
    It is pertinent that the finished goods has emerged due to some process(es) carried on the raw material.
    Thus logically you should map in solution manager based on the process only.
    The macro process while depicts the processes at the highest level.The Business scenarios, Business Process gives a good idea about how you should go about configuring.The Steps/activities helps you to map in to SAP thro' T/Codes.
    From the point of view of all of the below three,namely,
    Easy configuration activities
    Easy design of Unit and integration test
    Easy activities of Process enhancement and optimization,
    the option   Map the process as ISO Standards
    - Several projects : For each product line,will be most ideal.
    It is the processes that drives the activities.The control activities like internal control etc are all process based.Given these,divorcing the business process from the configuration -as in -is certainly not a good practice.
    Hope this helps.
    Regards,
    Ramesh

  • Difference between Solution Manager and SAP CTS

    Hi,
    I am having trouble understanding what is the difference between the two. Which tool is recommanded to use?
    Thx in advance,
    regards
    Edited by: Bob Thiouwz on Apr 3, 2008 12:47 PM

    Hi,
    search on SDN u will get more helpful answers.
    Solution manager is a tool which is used for maintaing a project related documents.
    refer the below link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06
    /people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
    CTS is the change and transport system used to transport Xi objects.
    refer the bleow link for more detail:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
    The XI use case for CTS+ introduces a new transport handling mechanism that offers tighter integration for the transport of ABAP, Java, and Integration Builder objects (Integration Repository and Integration Directory) using the Change and Transport System (BC-CTS) functionality.
    As your XI system requires both the ABAP and the Java stack of the SAP NetWeaver Application Server, the following transport tools are available after installation:
    The ABAP transport environment (BC-CTS)
    The file export and import mechanisms or CMS integration to transport Repository or Directory objects in your transport landscape
    In addition, you might also have to transport Java development objects by using the SAP NetWeaver Development Infrastructure itself.
    The enhancements to CTS in combination with the SAP Solution Manager Change Request Management (ChaRM) address the following issues:
    Synchronized transports for mixed systems (ABAP & Java)
    A unified application for mixed system landscapes
    Tracking of non-ABAP transports including Change Request Management
    For your XI landscapes there will be one central transport environment with CTS+ where you can manage all XI-relevant transport objects from a single entry point.
    Chirag
    Edited by: Chirag Gohil on Apr 3, 2008 4:36 PM

  • SAP Solution Manager for SAP Business Suite On HANA

    Dear Experts,
    I have a small question regarding the available installation options for SAP Solution Manager for SOH.
    Is there other available database platforms for the installation of SAP Solution Manager than the SAP HANA Database ?
    Meaning that if we have a customer who has the license for SAP HANA Database, does he have other database options for installing the Solution Manager that are covered by the HANA license ?
    Kind Regards,
    Mohamed Awny

    Well if you can find the solution manager software for a DB other than HANA in service market then you can install.
    You can check this by checking the service market SAP Technology Components" ==> SAP SOLUTION MANAGER" ==> SAP SOLUTION MANAGER 7.1
    HANA is so fast why choose another DB?

  • Solution Manager Key SAP Netweaver 2004s SR2

    Hi, 
    I am trying to install SAP Netweaver 2004s SR2,
    Can anyone help me by generating the solution manger key for
    SAP System ID: RVR
    Central Instance Host: ravuri
    Central Instance Number: 00
    Thanks
    ginjupalli

    No This is against licensing. This thread needs to be blocked.

  • Add new fields using BADI DNO_EVENT_SAVE in Solution Manager

    Hi,
    I would like to add new fields using BADI DNO_EVENT_SAVE. How can I add new fields? Thanks.

    Hi,
    This is the blog which explains how to add custom fields for CRM_DNO_MONITOR.
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    Instead of looking or changing the BAdI, you can copy the program of CRM_DNO_MONITOR and modify it.
    Please check this thread:
    Reg : CRM_DNO_MONITOR
    Regards,
    Sanjai

Maybe you are looking for

  • Weblogic Server 8.1 for japanese lang install comes out with CRC error

    We are trying to install the evalution copy of weblogic 8.1 sp1 Japanese. During extraction it comesout with following error. Extracting 0%........../mizrwsdv/weblogic/tmp //aaabIaiHU/jre141_03/lib/font.properties.UTF8.5.6 ba d CRC d4bf6e9f (should b

  • Light table View error

    when i swith from navigator view to lighttable view I get a error message that flashes causing the screen to flicker. I can only get out force quitting. any ideas on the error? i'm getting on a few different presentations. I'm on Keynote 5.1 with OS

  • Number range doubt

    In SQL Server we have some thing like Select * from Table_Name where Col_Name like '%[0-9]%' which would get all the row where column has atleast one number. Is there any such functionality in Oracle which is also short in length?

  • Premier Elements 11 trial doesn't run

    I downloaded and installed the trial version. It seemed to install correctly but when I select the program in the Start menu or click on the desktop icon that was created, nothing happens. So I uninstalled the program.

  • Diminishes timeout of the inactive user in the portal

    Hi Please, which parameter that diminishes timeout of the inactive user in the portal to netweaver 7.0?