BADI CTS_EXPORT_FEEDBACK

hi experts,
i implemented the method FEEDBACK_AFTER_EXPORT by the way this method is not callled during the CR release.
should i perform any other setting in CTS...
Can anyone help me?

Hi,
did you find a solution?
I have the same problem.
Kind regards,
Tobias

Similar Messages

Why my activated CTS BADI is not working ?

Hello,
I'm using the BADi CTS_EXPORT_FEEDBACK. To do this, I used the transaction SE19, created a new implementation, add my own code and activated implementation, class and method.
The problem is that when I export an order, the code I've written is not run.
My BADI is activated and I noticed that in the transport protocol new lines appears :
DEV        Developpement
       Checks at Operating System Level         03.09.2010 16:39:00    (0) Successfully Completed
       Pre-Export Methods                       03.09.2010 16:39:06    (0) Successfully Completed
       Export                                   03.09.2010 16:39:12    (0) Successfully Completed
     Import steps not specific to transport request
           Feedback after export or import          03.09.2010 16:39:13    (0) Successfully Completed
INFORM SAP-SYSTEM OF TP TERMINATION
Transport request   : ALL
Start: Executing method FEEDBACK_AFTER_EXPORT for business add-on CTS_EXPORT_FEEDBACK
End: Executing method FEEDBACK_AFTER_EXPORT for business add-on CTS_EXPORT_FEEDBACK
INFORM SAP-SYSTEM OF TP TERMINATION
End date and time : 20100903163913
Ended with return code: ===> 0 <===
I tried in my code to write in DB for example but no lines are added. My code works fine when I'me testing the BADI.
So it's very strange, everything seems to be activated and running but nothings done.
Another info, the BADI is launched from the program RDDFDBCK (l.348) and when I test this part of the code (call function...) everythings working fine...
Any idea ?
Thanks in advance.
Simon

Ok, I solved the problem Myself.
If anybody has the same problem.. here is the solution.
The job RDDFDBCK is running in backgroung. I ran a DEBUG thanks to the tip in this page : [SDN|http://wihttp//wiki.sdn.sap.com/wiki/display/ABAP/ABAP%20Debugger#ABAPDebugger-HowdoIdebugrunningbackgroundprocessesorasynchronousprocesses%3F]
I created a block While l_int = 0. Endwhile. In my BADI implementation in order to make the job duration long enough to enter in debug with SM50.
Here I saw that my SELECT didn't returning lines.
Finally, I found in SM37 that the main job was launched with the mandant 000 => and my tables contained a field MDNT.
So the BADI was launched but nothing was done cause to the mandant. I just removed the field MDNT of my customs tables to solve the problem.
Simon

MEssage when Transport request is released

Hello,
I want to get a message, when a transport request is released. But this throws no Event (Object CTREQUEST ) .
Is there any possibility ?
Thanks and best regards
Stefanie

Hi Stefanie,
Go to SE24 and open the class CL_EXITHANDLER, in the method get_instance, put a breakpoint on the statement
CALL METHOD cl_exithandler=>get_class_name_by_interface
Line 14 and release your request and see if the BADI CTS_EXPORT_FEEDBACK is called.
I cannot check this in my system as i don't have any request to release.
Regards
Rajvansh

Enhancement for se10

hi,
my requirement is that whenever a user releases a transport a custom program will be triggered.. I could not find any user exit for se10..Please tell me how can I implement this...

Hi,
You will not have any userexit for se10 as this TCode does not belong to SD module. But you have BAdi's to impliment your functionaity for the transaction SE10.
CTS_EXPORT_FEEDBACK -> feedback after export of a transport request.
CTS_IMPORT_FEEDBACK -> feedback after import of a transport request.
CTS_INT_REQUEST_CHECK -> internal: request checks.
CTS_REQUEST_CHECK -> request checks.
CTS_TASKDOC_TEMPLATE -> determine template for the task documentation.
I think BAdi CTS_EXPORT_FEEDBACK satisfies your requirement.
Please reward points if helpful

BADI UserExit Required for Before transport Request is created

Hi Friends,
I have a problem in implementing :
We have two development client one for support and other for development.
Same object can be worked together in both client simultaneously that is causing lot of synchronization problem in both client.
Can any one suggest any BADI which i can use when creating Transport Request to check if the same object is locked in other client or not using the RFC.
Please provide if there is any solution to implement the same.

Hi
Check the following BADI's
<b>
CTS_REQUEST_CHECK               Request checks</b>
CTS_EXPORT_FEEDBACK           Feedback after export of a transport request
CTS_IMPORT_FEEDBACK           Feedback after import of transport requests
CTS_INT_REQUEST_CHCK          Internal: Request Checks
CTS_TASKDOC_TEMPLATE        Determine template for the task documentation
<b>Reward points for useful Answers</b>
Regards
Anji

Badi/Enhancement to while creating a transport request

Hi Friends,
Please let me know if there any enhancement or Badi while creating a transport request to add a additional field while creating a transport request.
I found below list of badis but are not relevant to my requirement
CTS_EXPORT_FEEDBACK
CTS_IMPORT_FEEDBACK
CTS_INT_REQUEST_CHCK
CTS_REQUEST_CHECK
CTS_TASKDOC_TEMPLATE
Thanks in advance

solution removed, not correct.
Edited by: vishal kapoor on Nov 28, 2008 2:41 PM

User EXit / BADI to find if a program is changed or saved

Hi,
I need a user exit/BADI to tell me details of the program if it is being changed or saved. I need to capture the action when an object is changed or the point where a transport is created on saving the object. I found a CTS BADI. But it did not contain the name of the object being changed/saved. Can someone plz help me reg the same?
Poornima L Nathan

Hi,
try the following BADi and user-exits.
CTS_EXPORT_FEEDBACK -> feedback after export of a transport request.
CTS_IMPORT_FEEDBACK -> feedback after import of a transport request.
CTS_INT_REQUEST_CHECK -> internal: request checks.
CTS_REQUEST_CHECK -> request checks.
CTS_TASKDOC_TEMPLATE -> determine template for the task documentation.
This will help you in transport request issue.
As far as the program changes are concerned i guess you can use version management to compare them.
let me know if it works.
Regards,
Raj

CTS Badi or User Exit

Hello,
Does anyone know of a BADI of User Exit that exists for CTS within SE10 or SE01? We have a business need to email an interactive form to management when we release a transport request. I know that we could automate the process via the transport workflow however, the business users want to have a form emailed to them to approve and forward on to Basis. So, should this be done via workflow or is there a user exit/BADi that I can implement to accomplish this?
Best Regards,
Jereme

You will not have any userexit for se10 as this TCode does not belong to SD module. But you have BAdi's to impliment your functionaity for the transaction SE10.
CTS_EXPORT_FEEDBACK -> feedback after export of a transport request.
CTS_IMPORT_FEEDBACK -> feedback after import of a transport request.
CTS_INT_REQUEST_CHECK -> internal: request checks.
CTS_REQUEST_CHECK -> request checks.
CTS_TASKDOC_TEMPLATE -> determine template for the task documentation.

BADI for changing fields during Creation of BP in CRM

Hello to everyone,
I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.

Hi
If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
Cheers
Dom

Implementing BADI MD_ADD_COL_EZPS for MD04 custom column

Hi there,
I'm using BADI MD_ADD_COL_EZPS to display 3 new buttons and three new columns in MD04.
For each line item that is displayed, the custom column is filled, after the button is hit -This works fine.
My Question is:
Is there any way to limit the value that is filled into the new column so that it only appears on the FIRST line item/row?
(At the moment it is repeated all the way down the page - the new value is a material characteristic, so doesn't change, will always be the same for each line)
I've looked at all the available structures/tables in the FILL_ADD_COLUMNS method of the BADI, and none seem suitable
to determine the "first" row. (ie. something like the way SY-TABIX or SY-INDEX might be used)
Any help appreciated.
Thanks,
David.

Hi Shubhendu,
in the method 'ACTIVATE_ADD_COLUMNS', you can set the flag EZ1_MODE to '1' to make the first column visible always. (it's been a while, but I think setting it to '2' makes it visible when the button is pressed.)
Same applies to EZ2_MODE for second column, EZ3_MODE for third.
look at the flags/parameters in this method, and also in FILL_ADD_COLUMNS, to fill the data.
here you need to fill structure EMDEZX_USEX1 (for column 1) etc.
The code is hit for each record displayed in MD04
Hopefully this helps you.
Regards,
David

Help Needed Badly | BlackBerry INC000025111306 | BlackBerry PlayBook - Tablet button does not work, almost stuck, copper under screen, seventh repair

I was really Humilitated my RIM on this Ticket whcih i rasied.
1) I bought a new tablet in last november in 2 months i had a Charger issue
2) They said this charger issue we cannot replace with new tablet and gave me a refurbished Tablet to me .
3) Which also had same charging issue and they exchanged 2 more tablets and the last tablet which was given to me by RIM have a safety concern
- 1 Small mesh of wire is poping out from the Tablet
- Power Button is very hard and its not that easy to press,
So i raised the above ticket and was esclated internally with RMA as well and i got an update from the esclation agents that we will reply back in 2 Days i waited almost 3 weeks and called 2 times in this 3 weeks for an Update asking for a new tablet so that atleast once in all i can jeep a good 1 Tablet.
But they never bothered to call me and today i called them again and RIM gave me a call back mentioning we cannot give a new tablet we can again check this tablet repair it and give it back , If we cannot repir then give a replacement new/Old tablet,
I was wondering how can a tablet from RIM can go out without such safety concern ? How a mesh of wire can comeout of tablet so what safety norms RIM is follwoing for customer.
AM i not humilitated? since after taking all these struggle tto get a good tablet i have been considered as bad.
What RIM have to say for this, I am planing to take this to Legal department to follow how i can get a justice for this.

I would have deleted this but can't find a delete?
At any rate. got the Blackberry going again but it reset it and lost all the info, pictures and so forth.. oh well. at least it is still working.
Thanks.

Error message in a BADI getting displayed in a popup instead of status bar

Hello All,
I have implemented a BADI in ECC6 to prevent the change of formula in ERP from transaction O3I8.
The BADI gets called on clicking 'Save' from transaction o3I8.
Within the BADI i am giving an error message using the following command:
Message e000(ZABC) .
However , the message gets displayed in a pop up instead of the status bar .
The same is for information and warning messages.
Any suggestions on how to display them in the status bar ?
TIA
Regards,
Vartika

Hi Brad,
The checkbox to display messages in pop-up is already switched off.
Still themessages are getting displayed in pop-up.
Regards,
Vartika

Error message from a BAD PDF

I am using Adobe Reader to render PDF documents as a part of a process and then convert it into TIFF. Some of the documents that come in are corrupt PDF documents and cannot render itself in the reader and hence cannot be converted. This is the error that the reader throws:
ADobe reader could not open "test.PDF" because it is either not a supported file type or because the file has been damaged(for example, it was sent as an email attachment and wasn't correctly decoded)
Now, the process is automated with no human intervention. with the advent of this error message, since there is a modal dialog box waiting for a response from the user, the process is interrupted and needs human intervention.
My question is simply this. Is there an API i could use where i can figure out beforehand if the PDF is bad so i can reject such files early on? research shows that using the adobe forms server which has the PDF utility services, there is a query "Is a PDF document" that is available. I do not want to use a server product.
Is there any other ADOBE product that exposes something similar?

I guess i forgot to add that piece of information. WE do not create the PDFs. We receive PDFs from external sources over which we have absolutely no control and that explains why we get such corrupt documents in the first place. I was just wondering if there was a simple API event/method/means attached to any ADOBE product which is compatible with .net that tells me if the PDF is corrupt UPFRONT.

Error while transporting infospoke with BADI in BW7.0

Hi:
We have an infospoke with Transformation ( ie with BADI) in BI7.0.
While transporting to Quality box it gives error.
"Transfer structure /BIC/CZZTXXXXX3 could not be generated
Error when activating InfoSpoke ZTXXXXX3.
Message no. RSOH010 "
Could you please help in rectifying the error.
PS: we tried transporting BADI first and then the infosoke but still its failing.
Regards!
Saniya

Hi
Check the forum link below
Transport Problems with Spokes that have BADIs
Thanks

IPod can no longer sync or charge, bad pin connectors?

I've got an iPod touch thats a year old now that suddenly no longer will charge/sync to anything. I'm thinking maybe the pins are bad?
I've had difficulty inserting chargers into it since I got it, I've been careful to not handle it too roughly but it does take a strong push to get the charger in there. Of all the ipods I've had (and i had the first gen iPod touch before this too) over the years, never had that problem.
Before I get a bunch of "just reset it" kinds of replies, it is functioning properly other then that. Last night I did have it hooked up and synced to my Mac so it fully charged, but just now I went to connect it and now it refuses to connect at all. I've tried 2 cords, and with the same cords I plugged my iPhone in as well and it all worked fine, so it's definitely not my other hardware. iPod software is also up to date as well.
I haven't had a real issue of it not syncing with my computer before today, but in the past month it's had issues staying properly synced to my car radio (play it through USB). It would sometimes drop off or glitch up and not want to work correctly, though in the past week it started working more normally again.
I listen to my ipod as much as humanly possibly, so I'm wondering if this something I can take to the Apple Store and see if its fixable or replaceable. I've been looking for a great excuse to get the new red ipod touch but I've been unemployed since August.. Of course it has to break before I get a new job
Has anyone else had the issue of having difficulty getting the sync cords into their ipod touches/problems where the pins just die?
EDIT: Nevermind. My imac suddenly wont sync my iphone either but I plugged the ipod into the iphone charger and it synced immediately. It's something on my computer's end.
Message was edited by: Arei

*all the songs are there, but there are shown in light grey and not able to be high lighted.*
*I'm also not able to play from my ipod list, only from my itunes??*
Grey text when you look at the content and a lock symbol at the bottom of the screen just indicates that the iPod is set to sync automatically with iTunes. If you want to play the iPod songs through iTunes, delete songs from the iPod, drag songs from iTunes, add playlists to the iPod etc. you need to change the update setting to "manually manage songs and videos" as per the link above. The text will change from grey to black and everything will be directly accessible through iTunes
*I have seen a friend plug his ipod into some one elses computer and the same thing happened, it showed all the content but he was not able to access it, or modify it.*
Again that's most likely because the iPod was set to auto-sync with his home library. If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
*Before I backed up my itunes libary from my external hard drive, and itunes was empty, it would not allow itunes to be copyied from my ipod?*
iTunes will only give you the option to copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (music from CDs, other downloads etc) there are third party utilities that you can use to retrieve the music files and playlists from your iPod.

BADI CTS_EXPORT_FEEDBACK

Similar Messages

Maybe you are looking for