Badi does not execute at runtime

Hello All,
We are having a problem trying to implement BADI BBP_CATALOG_TRANSFER with method ENRICH_ITEM_DATA / interface IF_EX_BBP_CATALOG_TRANSFER
We have created a new implementation for this BADI that has generated a new class (in se19). The implementation is visible in V_ext_act and the class and implementation is visible in SXC_CLASS.
The implementation is active, the class is active and the class has the correct method IF_EX_BBP_CATALOG_TRANSFER~ENRICH_ITEM_DATA
However
When performing a where used list for this BADI our new implementation does not appear. Instead we are still seeing an old implementation that has been deleted. In addition the source code that we have implemented as part of the exit is not being executed during run time.
We think that we have covered all the steps required but may be missing something vital ???
I know this is a tricky one but any help would be greatly appreciated.
Thanks very much in advance
Regards
Ketan

Hello
Just wanted to add that in addition to our custom implementations, the class implementation
CL_EX_BBP_CATALOG_TRANSFER
is also associated with this BADI in the where used list.
When I look at this in our QA environment this class is not associated only the custom developed classes are associated.
Not sure why?
Any ideas would be appreciated..
Regards

Similar Messages

  • Interface mapping Object does not exist in runtime cache

    I am getting the following error after importing IR into our test system (PI7.0 SP10).
    Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
    You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 .     However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
    I cannot change the mapping and reactivate - as this cannot be changed.
    I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
    The mapping is there and I can test it in the IR.
    Any thoughts?

    I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
    I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
    Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
    Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
    CALL FUNCTION 'ZMY_FM'
       IN BACKGROUND TASK
       DESTINATION 'PI_DEST'
       EXPORTING
         t_file = lt_file.
    COMMIT WORK.
    Don't forget the commit work here.
    Hope this helps.
    Cheers
    Jens

  • When I touch my iPad screen to execute an app, the screen goes dark then the app icon reappears. The app does not execute.

    When I touch my iPad screen to execute an app, then the screen goes dark then the app icon reappears. The app does not execute. Any thoughts?

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    Basic troubleshooting
    From Here
    http://www.apple.com/support/ipad/basics/

  • Oracle ADF refresh as deferred does not execute query on page load

    In the oracle ADF page I have two panel boxes. (Oracle ADF 11.1.1.4)
    a) Personal information panel box with PanelFormLayout (PersonalInfoViewObj) - ReadOnly View Object
    b) Address information panel box with Table (AddressInfoViewObj) - Read Only View Object
    For the iterators in a) and b) I have kept refresh condition as deferred and cacheResult=false. Also in b) for af:table, I have kept contentDelivery="immediate"
    When page loads it fires SQL query for a) and populate the data in Personal information panel box. However for b) it does not execute the SQL query and the data is not getting populated ( in AddressInformation panel with the tables. Please note data is there in the DATABASE......)
    Becasue with the refresh as deferred it was not executing the sql query for Panel b) (panel with Table and table iterator). I have tried refresh as always and refresh ifNeeded/renderModel/prepareModel however in that case it is executing the SQL query two times (twice).
    Please let me know the best way to fix this issue.

    Hi,
    I think you need a method in an application module to init your data.
    In your AM : create a method like :
    public void init(){
    getViewObject().executeQuery();
    }In your adfc-config.xml create a methodCall from this method and a "control flow case" from the methodCall to your page.
    and keep refresh as "deferred " in your pageDef.
    Clément

  • Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

    Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
    How/Where to increase the relationship count?
    The message which I can see :
    Warning:
    This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
    Thanks

    This really brings up a larger topic around change management.
    The questions you should start with is
    1. What kind of change is happening to the raw material? 
    2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
    3. Who needs to approve this change?
    If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession.   Get Latest Revision will automatically switch out the material with the latest approved version.  This logic is also configurable in case you need to add additional guard conditions.   We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
    If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification.  Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur.   Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks. 
    Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes.  We can also schedule a change management training session for everyone where we can share our vision and tools available for change management.  This topic is quite large and generally requires a lot of business process discussion beyond just the tools available. 
    Thanks
    Kelly

  • User exit code does not execute

    I'm having a problem with User exit code that does not execute yet seems to be set up correctly.
    The User exit is implemented as FM "EXIT_SAPLIPW1_001" in function group XQSM.
    I've tried everything I know of with the CMOD and SMOD transactions, and I suspect some sort of transport error.
    The only clue I can find in comparing the development system (which works) with the test system (which does not work) is that running "Extended Check" in SE80 on function group XQSM fails with the following error:
    "The namespace of program SAPLXQSM has the setting "C" and cannot be tested."
    Has anyone any idea what could have happened?

    Let us try to retrace the steps.
    1. You created a Z project in CMOD and assigned the enhancement IQSM0001 and the component EXIT_SAPLIPW1_001 and activated the same. This is there in the transport.
    2. You double clicked on the include in the user exit and created it. You activated the code and included it in the same transport.
    If you did the above steps, then your user exit should be active in your test system.
    Can you please go to SE10, and list out the objects in your transport? You should see entries in there like below(not necessarily a complete list)
    R3TR CMOD <your project name>
    R3TR PROG ZXQSMU01
    See if you created any of the objects as local objects.
    Srinivas

  • Enhancement section does not visible at runtime

    I created enhancement section in SAP standard program, activated it but it does not visible at runtime. How do I make it available? Thanks!

    Hi Anthony,
    Have you implemented Implicit Enhancement?
    Once code is activated without error there is no other step required.
    Refer [Enhancement|https://wiki.sdn.sap.com/wiki/display/ABAP/ThenewEnhancementFrameworkandthenewkernel-basedBAdI] for more information.
    Regards
    Shital

  • Actions does not executed on quotation saved.

    Hi,
    Actions does not executed on quotation save.
    Action profiles has been created as per my production system.
    In production system it is executing properly. but in development system it does not get triggered.
    Pls suggest.
    Points will be rewarded.
    Thanks

    Hi Vinayak
    U can check in 'Define Conditions' for the actions and see whether the actions for the Action profile have been scheduled or not.
    On the left hand side u get the action profiles. U can right click on that and schedule the actions.
    Plz reward points if it helps.
    Thanks and regards
    Debolina

  • Tcode opens selection screen, but does not executes the program

    Hi!
    tcode opens selection screen of a custom program, but it seems that it does not executes the program itself.
    Sounds strange, but how to explain this if I can run a program manually with no problem and it displays result screen, but when I try to run the program with tcode - it opens selection screen but program quits before displaying result screen. I was putting a breakpoint at the begining of the program - it does not triggers debuger when running a tcode (it triggers debugger if to run program manually).... any ideas?
    Help will be appreciated,
    Mindaugas

    Are you using this???
          SET PARAMETER ID '80B' FIELD T_TABLE-OPBEL.
          CALL TRANSACTION 'FPE3' AND SKIP FIRST SCREEN.
    That way it should work....
    Greetings,
    Blag.

  • My calendar is stuck. i press 'done' and it stays as is.  I noticed this on my contacts also. it sometimes does not execute.

    my calendar is stuck. i press 'done' and it stays as is.  I noticed this on my contacts also. it sometimes does not execute.

    http://support.apple.com/kb/TS3281
    Apple does not respond here this is a user to user forum There are no Apple staff here
    Millions have updated without issue

  • Interface Mapping does not exist in runtime cache

    Hi,
    I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
    Regards
    Scharlotte

    Hi...
    Try to re-create the Interface mapping.
    And also test your Configuration with test tool where you can find the error on which step.
    if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
    Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
    u can follow this blog for how to test configuration part:
    Test Your XI Configuration With The New Test Tool
    Regards,
    Parvathy

  • Error : Interface mapping does not exist in runtime Cache

    Hello Guys
    I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
    but the data is not getting transfered from one point to another.
    I checked SXMB_MONI and saw the following error:
    Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
    Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
    Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
    But still has the same problem.
    Can some one help me with this? I would really appreciate it.
    Thanks
    Ram

    Hi,
    We too faced the same problem.
    Do the following
    1) Delete the Interface mapping and re-create it
    2) First test your Config with test tool
    /people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
    I think here you will find the error on Interface mapp or Receiver agreement
    Then delete the interface det and receiver agreement also and re-create those.
    Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
    Then finally u will get the success
    Regards
    Seshagiri

  • I have a slide with 4 smart shapes that I am using as buttons. If I select include in quiz, the On Success branch does not execute. If I deselect include in quiz, the On Success branch executes. What am I missing?

    I have a slide with 6 smart shapes that I am using as buttons. If I select include in quiz, the On Success branch does not execute. If I deselect include in quiz, the On Success branch executes. What am I missing?

    What setting do you have in Quiz > Settings > Required?  If it's not set to Optional, do that.

  • Waiting for approval item does not execute attached procedure !

    Hi.
    Using 3.0.8 on Solaris.
    Create one custom item type and associate one on plsql procedure to be run in place when item is listed within its folder.
    Go to folder, add item, look for the plsql result : Good it's working !
    After that create an item as a create with approval ACL and come back as folder owner, look at the plsql result : NOTHING !!!
    My PLSQL procedure is displaying some attributs in order for the folder owner to approve or not the waiting item. So if wainting for approval items does not execute associated plsql function as they are "waiting" (active=0) then I've got some problems!
    Any suggestions ?

    Hi all,
    Thanks very much for your feedback.
    In reply to Brian's suggestions
    1. I checked to see if WS14500013 was defined as general task; it was not and this has has now been rectified. Went through the other workflows also.
    Double checked the contents of the tables:
    APPROVAL_TABLE, ITEM_APPROVAL_TABLE, ITEM_APPROVAL_OBJECT.
    All appeared OK.
    Created a simple one line SC. Invoked approval preview and the message: 'Approval step without ad-hoc capability. No preview possible' was displayed. This is odd since WS14500015 and sub-workflows do not use AD-HOC approval. Or am I not understanding this correctly.
    Followed Smitas suggestions but to no effect.
    Here are the contents of the said tables which I lifted from the workflow tables:
    Again, many thanks for your responses...
    **APPROVAL_TABLE****
    NAME="APPROVERLIST:ApproverList:"   <APPROVAL_INDEX>0000000001</APPROVAL_INDEX>
    <APPROVAL_BRANCH>0000000001
    <APPROVAL_AGENT>USMGRR11000 
    <APPROVAL_STATE>0000000002 
    <INITIAL_AGENT>USMGRR11000
    <INITIAL_INDEX>0000000002
    **ITEM_APPROVAL_OBJECT***.
    NAME="ITEMAPPOBJTABLE:ItemAppObjTable:" - <item>
      <SC_GUID>957117374BC6434882B0BFD5462A2724</SC_GUID>
      <APP_CRIT_NAME1>COST_CTR</APP_CRIT_NAME1>
      <APP_CRIT_NAME2>ORDER_NO</APP_CRIT_NAME2>
      <APP_CRIT_NAME3 />
      <APP_CRIT_VALUE1>R11000</APP_CRIT_VALUE1>
      <APP_CRIT_VALUE2 />
      <APP_CRIT_VALUE3 />
      <APPROVAL_OBJECT_GUID>9E6EFAC500B681458284BBB60BF99C8A
    *****ITEM_APPROVAL_TABLE***,
    NAME="APPROVALITEMLIST:ApprovalItemList:"
    <item>
    <APPROVAL_OBJECT_GUID>9E6EFAC500B681458284BBB60BF99C8A  <APPROVAL_ITEM_GUID>1137519335F51C4DB3D2844A8AD484C0

  • System - services - reporting does not execute ABAP Reporting

    Hi All,
    system -> services -> reporting does not execute ABAP Reporting.
    we are able to execute sa38 by running t-code.
    Please help.
    Thanks
    Harshit

    Check authorizations (SU53).

Maybe you are looking for