BADI FI_INT_CUS01 method INT_PRINT_OPTIONS not getting called in RFINTITAR

Hi,
I have implemented the BADI FI_INT_CUS01 to set the Print archive mode (Storage mode) to '3' (print & archive) for the FINT transaction (program name: RFINTITAR), using the method INT_PRINT_OPTIONS. But the method INT_PRINT_OPTIONS is not being called in the program RFINTITAR anywhere. So the BADI implementation is not being called up, so not able to change the Print archive mode to '3'. Please let me know if I'm missing anything.
Thank you..
Lakshmi

Carin,
Using the method INT_ADD_ITEMS is possible to filter, displaying only the items required.
See also SAP note 736223 .
Regards,
Fabrício Fernandes Aguiar

Similar Messages

Badi trip_ web_ check not getting called in Portal

Hi
We have implemented the trip_web_check badi to check the validation on the Advance entry while Travel request screen (standard). Two days back validation was working fine.
But today it is not getting called. Please give you inputs if you have any idea?
Also tell me if any other settings in SPRO already we have assigned the badi in spro

Hi,
Donu2019t go for the NOTE directly
1st you need to check basic things ...
( take a help of ABAPER )
Check where the badi implementation is active or not ...You can do this by "SE19" give the BADI implementation name and check where its Activate or not.
If it is activate then set the User specific (the user which your are using on Portal) break-point in the method and check where its get stop in BADI .
Barin : 1st we need to check some basic things like where the BADI is Active or some techical issue like coding etc ...NOTE will be last option to use.
Cheers,
Vivek D Jadhav

One Method is not getting called from of one BADI Customer_add_data

Hi,
I am Implementing one method BUILD_TEXT_FOR_CHANGE_DETAIL
I have done coding part also and set breakpoint to check the data.
I went to transaction XD01 and created one customer and check the execution but it didnt reach to the step where i placed the break point.
I checked the program SAPMF02D from transaction x01 and searched for the method where its being called . But search for unsuccessful as no reaults has been found.
Please help me in rectifing this issue.
Thanks,
Izaz.

if the question is not clear please tell me i ll write it in detail

Bookmark method for a page is not getting called

Hi,
I am developing a simple ADF application which contains two jspx pages, in JDEVELOPER 11g (build JDEVADF_MAIN_GENERIC_080910.1420.5124).
I have a commandLink in Page1 which takes me to the Page2.I have a bookmark method for Page2, which gets called when I load the page.
When I access the Page2 directly,the corresponding bookmark method is getting called.But when I navigates it through commandLink provided in Page1,the bookmark method is not getting called.
Page1.jspx:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document maximized="true">
<af:form>
<af:commandLink text="Go to Page2" action="page2" />
</af:form>
</af:document>
</f:view>
</jsp:root>
Page2.jspx:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:bib="http://xmlns.oracle.com/dss/adf/faces">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document maximized="true">
<af:form>
<af:outputText value="This is Page2"/>
</af:form>
</af:document>
</f:view>
</jsp:root>
adfc-config.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<view id="page1">
<page>/page1.jspx</page>
</view>
<view id="page2">
<page>/page2.jspx</page>
<bookmark>
<method>#{mBean.bookMarkMethod}</method>
</bookmark>
</view>
<control-flow-rule>
<from-activity-id>page1</from-activity-id>
<control-flow-case>
<from-outcome>page2</from-outcome>
<to-activity-id>page2</to-activity-id>
</control-flow-case>
</control-flow-rule>
<managed-bean>
<managed-bean-name>mBean</managed-bean-name>
<managed-bean-class>view.ManagedBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</adfc-config>
ManagedBean.java:
public class ManagedBean {
public ManagedBean() {
super();
public void bookMarkMethod() {
System.out.println("Inside bookmark method");
Please look into this...........

Hi Frank,
I need to provide the af:commandLink inside af:table component and the values which I pass to page2 depends on the row I select at runtime.
so,I am trying to use ad:setActionListener inside af:commandLink.
If I use FacesContext.getCurrentInstance.getExternalContext.redirect() inside the actionListener of af:commandLink, I need to extract all the required values in the actionListener.
Isn't there any way so that, I can pass the values using af:setActionListener inside af:commandLink and a method ( which will initialise the managed bean) will be called when page2 loads ???
Regards,
Lokesh.

Getter & Setter Method not getting called for a field enhanced through AET

Hello,
I am new to SAP CRM 7.0 and working on a requirement.
A Z-field was added by our functional guy in CRM 7.0 WebGui through AET in the 'Create Opportunity' transaction (Header data).
Now the requirement is, as soon as the opportunity is created through the WebGui, I should post a document in R/3 and paste that document number back to the enhanced Z-field in opportunity.
Work done by me:
I pressed F2 on the enhanced Z-field in the WebGui screen and took the details of view, component name etc. After this I went to normal SAP CRM system and open tcode "BSP_WD_CMPWB", located the corresponding view "BT111H_OPPT/Details" and right clicked & enhanced the same.
Then I opened the structure of this view, expanded context node, located context "BTOPPORTH" and inside this, located my Z-attribute. Now right clicked on the Z-attribute & selected the option "Generate SETTER & GETTER Methods" and these were generated successfully.
Problem:
The problem is even after putting external break points in these methods, these methods are not getting called while creating, modifying & displaying the Opportunity in WebGui.
I hope that for the requirements that I have, I have to do the coding in "Getter & Setter" methods. But since these are not getting called, I am unable to proceed.
Please help/suggest how to achieve this.
Thanks in anticipation.
Best Regards,
Rahul Malani

Hi,
If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
There should be some note for the issue you faced.
please refer:
Help Needed immediately - AET getter setter methods not getting triggered
Regards,
BJ

Get method of HtmlPanelGrid is not getting called

Hi,
I'm creating components dynamically.
I have a dropdown. Based on the selection of dropdown, the corresponding values are displayed and the get method of HtmlPanelGrid should be called.
First time the panel grid getmethod is getting called. But when i change the value of drop down, panel grid get method is not getting called and its not rendering.
This is the code:
JSF:
Drop Down
<h:panelGroup>
<t:selectOneMenu id="selectProjectTypes" onchange="sbmitform();" immediate="true" valueChangeListener="#{ProjectController.projectTypeChanged}" value="#{ProjectController.project.selectProjectTypes}">
<f:selectItem itemLabel="--------------------" itemValue="-1"/>
<f:selectItems value="#{ProjectController.projectTypesList}"/>
</t:selectOneMenu>
</h:panelGroup>
Panel Grid
<h:panelGrid columns="2" rendered="#{ProjectController.projects}" id="test" binding="#{ProjectController.defaultValues}" columnClasses="hunderadfifty" cellpadding="5" />
Controller:
public void projectTypeChanged(ValueChangeEvent event) throws AbortProcessingException,Exception {
String nodeTypeId = null;
String selectedValue = (String)event.getNewValue();
getSessionCache().addValue("test", 0, "1");
if(selectedValue.equalsIgnoreCase(selectedValue)){
try
// this.getDefaultValues().setRendered(true);
// defaultValues=this.getDefaultValues();
} catch (Exception e)
e.printStackTrace();
FacesContext.getCurrentInstance().renderResponse();
Panel Grid Method
*public HtmlPanelGrid getDefaultValues() throws Exception {*
String devlues = (String)getSessionCache().getValue("test");
Application app = FacesContext.getCurrentInstance().getApplication();
labelList = nodeTypeFieldsService.getFixedFields(this.getRpUserData(), this.getAuthUser());
HtmlPanelGrid panelGrid = (HtmlPanelGrid)app.createComponent(HtmlPanelGrid.COMPONENT_TYPE);
for(int i = 0; i<labelList.size(); i++)
HtmlOutputText heading = (HtmlOutputText)app.createComponent(HtmlOutputText.COMPONENT_TYPE);
HtmlPanelGroup panelGroup = (HtmlPanelGroup)app.createComponent(HtmlPanelGroup.COMPONENT_TYPE);
HtmlInputText inputText = (HtmlInputText)app.createComponent(HtmlInputText.COMPONENT_TYPE);
String fieldHeading =((ProjectField)labelList.get(i)).getFieldHeading();
int fieldLength = ((ProjectField)labelList.get(i)).getFieldLength();
String fieldDescription = ((ProjectField)labelList.get(i)).getFieldDescription();
String fieldType = ((ProjectField)labelList.get(i)).getFieldType();
inputText.setValueBinding("value", (ValueBinding) app.createValueBinding("#{ProjectController.newProj}"));
if(fieldType.equalsIgnoreCase("3"))
heading.setValue(fieldHeading);
heading.setTitle(fieldDescription);
inputText.setMaxlength(fieldLength);
inputText.setSize(fieldLength);
UIRDDialog dialog = (UIRDDialog)app.createComponent(UIRDDialog.COMPONENT_TYPE);
dialog.setTitle("Object Type Dialog");
dialog.setHeight("370");
dialog.setWidth("350");
dialog.setUrl("searchObjectTypeDialog.jsf");
UIRDIconButton iconButton = (UIRDIconButton)app.createComponent(UIRDIconButton.COMPONENT_TYPE);
iconButton.setType("button");
iconButton.setTitle("Search for Object Types");
iconButton.setIcon("/image/icon/portalicon_search.gif");
iconButton.setActivateDialog("searchObjectTypeDialog");
panelGroup.getChildren().add(inputText);
panelGroup.getChildren().add(iconButton);
panelGroup.getChildren().add(dialog);
panelGrid.getChildren().add(panelGroup);
}else
panelGroup.getChildren().add(inputText);
heading.setValue(fieldHeading);
inputText.setMaxlength(fieldLength);
inputText.setSize(fieldLength);
heading.setTitle(fieldDescription);
panelGrid.getChildren().add(panelGroup);
panelGrid.getChildren().add(heading);
panelGrid.getChildren().add(panelGroup);
HtmlCommandButton createButton = (HtmlCommandButton)app.createComponent(HtmlCommandButton.COMPONENT_TYPE);
createButton.setId("create");
createButton.setTitle("Create");
createButton.setValue("Skapa");
createButton.setAction(app.createMethodBinding("#{ProjectController.saveProject}", null));
HtmlCommandButton backButton = (HtmlCommandButton)app.createComponent(HtmlCommandButton.COMPONENT_TYPE);
backButton.setId("back");
backButton.setTitle("Cancel");
backButton.setValue("Avbryt");
backButton.setAction(app.createMethodBinding("#{ProjectController.cancel}", null));
panelGrid.getChildren().add(createButton);
panelGrid.getChildren().add(backButton);
return panelGrid;
/* } else {
return null;
kindly help me out.
regards
venkatraman.P

Hi,
I'm having the exact same problem, and it's freaking me out!!! The setGridPanel method is always called but not the getGridPanel. This one is only called the first time the page is rendered, and when I change a drodpdownlist it never gets the gridPanel again! I'm using an HtmlPanelGrid. Anyone can help please?
Thanks in advance,
Raquel

Method in custom controller not getting called from view

Hi experts,
I have a very strange problem. My web dynpro application works fine on the development portal. i am in the process of deploying to the production portal there is no issue it deploys perfectly without any problems. However i have noticed that some methods in my custom controlller which are called from the view do not run. there is no error message or anything data just doesnt get picked because the execute function which fills the context are in the custom controller methods.
For some reason the method in the custom controller does not get called even though i'm calling it for the view. I have this problem with two methods. the other methods work without any issue.
Now i overwrote what i have on production at the moment so am stuck and in need for a solution.
I have tried undeplying, restarting and re-deploying to no avail. what could be wrong?
thanks and regards,
dilanke

Deal all
This is the code. basically im calling it from the plug on the detail screen.
This is the method that doesnt get called anymore.
wdThis.wdGetGetPurchaseOrderCustController().getPODetail();
The reportSuccess() works fine.
regards,
Dilanke
public void onPlugFromListView(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onPlugFromListView(ServerEvent)
     try
         String po = wdThis.wdGetGetPurchaseOrderCustController().wdGetContext().currentContextElement().getPO_Id();
          wdContext.currentZGETPODETAILS_INPUTElement().setI_Ebeln(po);
          wdThis.wdGetGetPurchaseOrderCustController().getPODetail();
          wdComponentAPI.getMessageManager().reportSuccess(po);
          String fileName = "F://XML_Downloads//" + po + ".xml";
          IWDResource resource = WDResourceFactory.createResource(new FileInputStream(new File(fileName)),fileName,WDWebResourceType.XML,true);
          wdContext.currentContextElement().setXml_Resource(resource);
     catch(Exception e)
          e.printStackTrace();
    //@@end

Badi is not getting called in IC Web client in Quality server

Hi Experts,
I have implemented a badi CRM_SERVICE_CONTRACT which determines contract based on component no. in complaints.
My badi is working fine in development server in IC web client but in Quality server the badi is not getting called in IC Web client.
The badi is active in both the servers.
Please let me know what configurations to look into.
Regards,
Sangeeta.

Hi,
Did you try to debug till the point where the BADI is supposed to get called? You may set a break-point in your Dev system to check the call stack and based on that set break-points in your QA system and see why this is not getting called?
Also, check all the implementations of the BADI got transported to the QA system. Check if there is any filter on that badi.
Regards
Prasenjit

BAdi not getting called after applying CRM7.0 ehp1

Hi experts,
We applied EHP1 to our Sandbox system and now Badi: CRM_MKTPL_OL_OBJ is randomly getting called.
I went to se18 enter the enhancement spot and once i enter the Badi Implementation I can see under
Runtime Behavior that the implementation is active. However the description in Effect in Current Client says:Execution depends on runtime filter values
While in our other client in which we havent applied EHP1 the Effect in Current client: Implementation is called
I know that is just the description but I am not sure if somthing has changed with EHP1
For both clients the implementation is active, but in the client in which we applied EHP1 the Badi is not getting called where expected.
Does anyone please have any suggestions.
your help is appreciated.
thanks,
Jeannet.

Hi Jeannet,
probably have a look at the filter values in the BAdI implementation as well. It says it has got filters. Maybe the BAdI is only activated for Campaigns but not Elements?
If that does not bring the conclusion do a where used list on the interface for the BAdI. It will bring you to the place where it is called in ABAP and you see the direct cause why it sometimes is called or not.
I implemented the mentioned BAdI on CRM 6 as well as 7 and 7.1 had no problems I can remember so far.
cheers Carsten

ACE for CRM 2007-AFO method not getting called!

Hi Experts,
I am trying to implement ACE for CRM 2007.The only issue/concern is the Actor From Object(AFO) method is not being called even once.
I was assuming that every method is called at the time of right's activation.
I placed breakpoints in all the 5 methods, but only method Actor from User(AFU) and Object by Filter(OBF) were being called.
Can anybody suggest at what point the method-Get Actors From Objects is called?
Thanks and Regards,
Rohit

Hi Rohit,
the method Actors-For-Object isnt used any more by SAP. Always use method Actors-For-Objects.
This method should be called, when objects pass the method "object_by_filter" (runtime --> check_object..., activation --> get_object..).
Perhaps there are no objects passing your OBF-methods? Can you check the output of your method?
Regards,
Mario

Custom enhancement spot not getting called.

Hello guros,
We are currently upgrading to ECC6 and I started playing a little bit with enhancement spots.
I've tried inserting my own enhancement spot using
ENHANCEMENT-SPOT ELI SPOTS ZELI_SPOT.
I've created the ZELI_SPOT badi definition and created a sample interface.
Then I implemenet an enhancement spot and implemented the BADI interface (Which by the way should have all its methods static right?).
Despite all objects being active, and the explicit "IMPLEMENTATION IS CALLED" on the badi implementation, my implementation is not getting called, Is there something im missing here?
I would also like to understand how in such a case do i actually transfer parameters to such a method.
Thanks a lot in advance,
Eli.

Hi,
Can you elaborate on where you have created the enhancement spot. If the enhancement spot you have created within some IF condition in the standard code, then it will get triggered only if the condition is true.
Regards,
Hari

Server side function not get called after dispatching cairngorm event second time on same page

Hi All,
I am facing a urgent issue regarding cairngorm event. Actually my page contain 3 button add,delete,save
and clicking of any button I do the respected functionality. For ex:
I click the add button & on clicking of add button I fire a cairngorm evnt & after getting response from server side that the record is added
I displayed a message that the record is added & update the data source.
After addition of the record , with out going to other page if I perform the same functionaly(Like adding another record) on same page the cairngorm
event not call the server side function - after debugging I find out that cairngorm event reach to the corresponding excutecommand function & called that function but it is not calling my server side function & I also din't get any error message .
I dont know why the server side function not get called?. similarly if I try for delete or update case the same things happend. Only for the first time it works properly but not for the second time.
Could any of you please tell me why the cairngorm event not calling the server side function.
Thank you for your kind assistance.
Regards,
Ujjwal

Okay, well I think I've worked out the problem.
In ASP.NET we would typically bind repeating controls such as DataLists and Repeaters manually using <i>Control</i>.DataBind(), because we're usually using a separate class library containing collections for our objects. Seems the SAP Table control doesn't like this approach.
I changed the code so that the databinding is specified on the control, and call the Page's DataBind() method and it all worked fine.
One tip: because the collection I used to bind to is in a separate class library, I receieved a <i>BC306523: Reference required to assembly MyAssemblyName...</i> message, even though I had a reference to the assembly in my project and the DLL is being properly deployed. To fix this, you must include the following directive at the top of the component's ASCX file:
<%@ Assembly Name="AssemblyName" %>

This method should not be called anymore. The client was already released i

Hi,
while configuring Business Packager for Projects 50.3 fo, we made few changes in R/3 side as per the documentation. after that we are getting following error in portal
"This method should not be called anymore. The client was already released into the pool or the pool entry was deleted"
all the chages were reverted in R/3 system still we are getting the same error.
Can any one help on this issue....
Thanks in advance and for early responce higher marks would be awarded!!!..
Regards
Ravi Sankar Karri

Hi,
Well there were errors in how stop works:
"Stopping a thread with Thread.stop causes it to
unlock all of the monitors that it has locked (as a
natural consequence of the unchecked ThreadDeath
exception propagating up the stack). If any of the
objects previously protected by these monitors were in
an inconsistent state, the damaged objects become
visible to other threads, potentially resulting in
arbitrary behavior. "
I do understand that you want to have something like
killTheTreadIDontCareAboutConcequences-method, but
it's better to let all your methods that you want to
be able to terminate take a timeout argument, and deal
with the termination in the method. (Close the
sockets/streams etc that you are blocking on).
/KajThe point is, it is not always possible to make those blocking methods stop, via some magic "timeout" thingamabob. The bottom line is still that the blocking methods were written incorrectly to begin with (to possibly block indefinitely), so one cannot come up with an across-the-board solution, other than getting the root cause fixed in the first place. However, one is not always in control of fixing the root cause.

CRM_ISA_PRICING_ITMDATA_GET is not getting called

Hi All,
The FM - CRM_ISA_PRICING_ITMDATA_GET (and BADI CRM_ISA_HDR_PRICING - NEW_ITEM_VALUES_READ) to pass additional pricing fields is not getting called during product catalog pricing . We added the below change to xcm->customer->modification->backendobject-config.xml and still is not working.
<configs>
<xi:include href="$/modification/backendobject-config.xml#xpointer(backendobject/configs/*)"/>
<config isa:extends="../config[@id='crmdefault']">
<businessObject type="PriceCalc">
    <params>
           <param name="doItemCalls" value="true"/>
      </params>
</businessObject>
</config>
</configs>
Even it is not working if we change the   <param name="doItemCalls" value="true"/> in xcm->sap->modification->backendobject-config.xml .
Any suggestions on how this FM (and BADI) will be called during product catalog pricing?
Thanks,
Rajinikanth G

Hi,
There was an authorization issue which configured in XCM and it was called after addaing proper authorizations.
Thanks,
Rajinikanth G

DidReceiveData not getting called for consuming a SOAP webservice

I am trying to access a webservice in iphone. didReceiveResponse connectionDidFinishLoading is getting called however didReceiveData is not getting called. I checked NSHTTPURLResponse allHeaderFields where Content-length is 0 and statusCode is 400. I am not getting why I am getting this HTTP status code. Can someone please help me in finding this error. Here is my code:
- (IBAction)buttonClickedid)sender {
NSString *soapMsg =
[NSString stringWithFormat:
@"<?xml version=\"1.0\" encoding=\"utf-8\"?>\n"
"<soap:Envelope xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" xlmns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">\n"
"<soap:Body>\n"
"<GetAllCarsJson xmlns=\"http://cscserver2.carrollu.edu/tshah2/\">\n"
"</GetAllCarsJson>\n"
"</soap:Body>\n"
"</soap:Envelope>"];
//---print it to the Debugger Console for verification---
//NSLog(@"%@",soapMsg);
NSURL *url = [NSURL URLWithString:@"http://cscserver2.carrollu.edu/tshah2/CarService.asmx"];
NSMutableURLRequest *req = [NSMutableURLRequest requestWithURL:url];
//---set the headers---
NSString *msgLength = [NSString stringWithFormat:@"%d",[soapMsg length]];
[req addValue:@"text/xml; charset=utf-8" forHTTPHeaderField:@"Content-Type"];
[req addValue:@"http://cscserver2.carrollu.edu/tshah2/GetAllCarsJson" forHTTPHeaderField:@"SOAPAction"];
[req addValue:msgLength forHTTPHeaderField:@"Content-Length"];
//---set the HTTP method and body---
[req setHTTPMethod:@"POST"];
[req setHTTPBody: [soapMsg dataUsingEncoding:NSUTF8StringEncoding]];
//[activityIndicator startAnimating];
conn = [[NSURLConnection alloc] initWithRequest:req delegate:self];
[conn start];
NSLog(@"Connection = %@", conn);
if (conn)
    //webData = [[NSMutableData data] ];
    webData = [[NSMutableData alloc] initWithCapacity:2048];
    //[[NSMutableData data] retainArguments];
- (void) connection NSURLConnection *) connection didReceiveResponse NSURLResponse *)response
    NSLog(@"soapMsg1: %d", [webData length]);
    //webData = [[NSMutableData alloc] initWith:
    [webData setLength:0];
- (void) connection NSURLConnection *) connection didReceiveData NSData *)data
    NSLog(@"DONE1111");
    [webData appendData:data];
    //NSLog(webData);
- (void) connection NSURLConnection *) connection didFailWithError NSError *)error
    NSLog(@"ConnectionFailed");
    //[webData release];
    //[connection release];
- (void) connectionDidFinishLoading NSURLConnection *) connection
    NSLog(@"DONE. Received Bytes: %d", [webData length]);
    NSString *theXML = [[NSString alloc] initWithBytes:[webData mutableBytes] length:             [webData length] encoding:NSUTF8StringEncoding];
    //shows the XML
    NSLog(theXML);
    //[theXML release];
    //[activityIndicator stopAnimating];
    //[connection release];
    connection = nil;
    webData =nil;

Hi,
If you can see the field in UI and still get_ method is not being triggered then try to regenerate these methods. If it still doesn't work then please look for SAP notes or raise an OSS.
There should be some note for the issue you faced.
please refer:
Help Needed immediately - AET getter setter methods not getting triggered
Regards,
BJ

BADI FI_INT_CUS01 method INT_PRINT_OPTIONS not getting called in RFINTITAR

Similar Messages

Maybe you are looking for