BADI for Assessment Cycle

Hi All,
Can anyone help me to search for BADI??
In Our Assessment Cycle the Profit center is hard coded for posting the values using Badi. Can anyone help me how to search the Badi. The Business want to avoid such postings to the Profit center.
Full points will be given
Regards
Tajammul

Hi Tajammul,
You can check the badi implementation in SE18 or SE19. If you are sure that the BADI is active then you can search it either in the infosystem or based on the application hierarchy.
Regards,
Abhisek

Similar Messages

Substitution Rule for Assessment Cycle

Hii All,
Can anybody suggest how do i define substitution rule for Assessment Cycle??
Reg
Umesh

I have created a assessment cycle thru KSU1 where i assigned SKF key , Thru SKF key i have to define allocation numbers with receiver cost centers but before that i have to set substitution rule for cycle.
All the common expenses booked under one common cost center
For eg. Expensed booked in GL series 3 - Common Cost Center
in Cycle - Assesment CEle start with 9
In FI - Common Exp GL start with 8
Above Example , when i run the cycle expenses will be allocated in 8 series with receivers cost center
Can ny1 suggest me how to do the process,how to define the rule
REg
Umesh

Bapi for assessment cycle

Hello everybody,
I would like to use a standard bapi (or at least a standard function module) to entry values of assessment cycle segments (senders, receivers, percent....)
Does anyone know if such a standard bapi exist ?
Thanks for your help, you'll be rewarded.
Philippe

You can use KGAL_CREATE_CYCLE. Look for function group KGALRFC.
I think they are not officially released, but I used them in a project successfully.
Kind regards
Tapio
Edited by: Tapio Reisinger on Jan 28, 2008 4:11 PM

Any BAPI or FM for Assessment cycle create 3KE1 tcode

Hi,
Any BAPI or Function module to create actual assessment cycle 3KE1 tcode.
i am doing BDC for that currently. Anybody done this please send the coding for this.
thanks
Muthappan

Hi Muthappan,
Could you please send me some sample code you used to create Assessment Cycle / Distribution Cycle using the function module.
Many Thanks in advance
Soumen

Runtime Analysis in PA Assessment Cycle

Dear All,
I have run an PA Assessment Cycle in with "Flow Trace On" and "Run Time Analysis On".I have a 3 part question
A) I seek your help in understanding the following and correct my understanding(stated in small brackets) if i am wrong
     1) Before Selection (Start Time of the Cycle)
     2) After Selection (Database Selection)
     3) After Iteration (???)
     4) After Oldkey (???)
     5) After Post (???)
     6) No Of Sender Values in Database (No of Senders in my Cycle and for which Master data exists in Database)
     7) No Of Receiver Values in Database ( No of Unique Combination of Receivers in the Database CE4XXXX table)
     8) No Of Allocating Senders (Out of the Senders stated in Point 6, No of Senders that are actually sending Values)
     9) No Of Allocating Senders (Out of the Senders stated in Point 7, No of Receivers that are actually receiving Values)
    10) No Of Line Items(???)
B) When i run the same Cycle in Test Run and Update run there is a huge difference in time and the Values for the items 6~10 points also differ( i am the only one working on the test system and there is no other data posted posted apart from this) so what is the reason for difference.
C) If i am running on a HANA COPA Accelerator, will the change in the receivers (stated below) have an impact on the read time (logically yes, but need some expert opinion also)
     1) No of Characteristics (Ex: Unitil now Profit Center alone, from now on PCTR, Product, Div, Dis Chl)
     2) No of Characteristics Values (Ex: Unitill Now PRTCR Values are A,B and C From now on it will be A~Z)
Request your valuable inputs. And my apologies for a very long question.
Thanks & Regards
Surya

Hi Gaurav,
Thanks for your comment. But that is not compliant to my question. I didn't do any configuration in KEPA and assign any characteristics groups for assessment cycle. However I really don't know why only one characteristics(Product:ARTNR) is suppressed and so I cannot input any value into that characteristics for actual assessment cycle.
I will appreciate your kindly help.
Best regards,
Ivan

Assessment Cycles' Log

HI,
Can somebody help me in getting the Log for Assessment cycle sequence. In Transaction code FAGLGA16 I am not able to get the time. It is giving only the date.
Thanks & Regards,
Raghav

Hi,
Report Groups and reports in report painter can be transported from DEV-QA-PRD. You can do this using T.code GCTR.
You can also transport sets from DEV-QA-PRD. Go to GS02 Change sets. Mention the set you want to transport and then go to utilities in menu bar. Under utilities you will have the option of transport which have transport request has sub node.
Please assign points if useful.
Regards,

Assessement cycle

Hi,
I have a requirement as below for Assessment cycle.
Requirement is to send a proportion of the costs of monthly salary to a specific cost centre, and then to be able to assess
those amounts to secondary cost elements. Problem is that internal orders require a profit segment rather than a cost centre.
For example -
Employee 111 (mr.david) in co code 1000
26% is posted directly to cost centre 200914
20% is posted to cost centre 200913, order 900080 (which then posts 30% to product 500006, 40% to product 500008 and 30% to product 500010 via the PSG)
I then want to send 46% to cost centre 200913, which can then subsequently be assessed to a secondary cost element.
then 8% 200913 different cost element.
I am assuming that internal orders are the correct vehicle to do this, and then once they have been settled, the values from the specific orders can be assessed through the assessment cycles ?
I have tried setting up an internal order (900086) to do this, but the statistical entries to the cost centre will prevent these from subsequently being assessed.
Anybody can guid me.
Thanks in advance.

Hi,
You can do the same without posting the same to internal orders also. then the postings in Cost centers are real. you can do multiple assessments as per your business requirement.
You plan your assessments cycle wise by identifying costs from which cost centers are to be allocated to which cost centers in each cycle. Then only you create you cycles in SAP.
Hope this will clear you confusion.
Regards

COPA Assessment Cycle using KEU5 for multiple controlling areas

Hello All,
There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
Regards,
Soumya

Hi Soumya,
Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
Pls find the following text from SAP Help...
Parallel Processing of Cycles of an Allocation Type
Use
Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
Srikanth Munnaluri

Assessment Cycle for Planned Cost

Hi,
I have production cost centers and dept cost centers for which cost center planning has been maintained in KP06. I have maintained assessment cycle for planned costs with planned skf. When I run the cycle, system is apportioning the costs based on the factors maintained.
However on execution, without test tun, the system is posting the costs to the receiver cost centers as Actual Costs and not Planned Costs..
Can anyone tell me what is the reason?

Hi,
Have you created ur assessment cycle in T.Code: S_ALR_87005540 - Define Assessment for Plan cost (or) S_ALR_87005742 - Define Assessment for Actual cost. Assessment cycle execution t.code. KSUB for Plant cost posting. and KSU5 for actual cost posting.
If you define cycle in S_ALR_87005540, Please check have u select Plan (or) Actual Radio button
Thanks

Execution of assessment cycles for Costcenter group

Hi Friends,
   i have a program which excutes assessment cycles for 1 costcenter.
    now i need to run the program for multiple costcenter
(costcenter group)
eg: in the selection screen if user enter the costcenter group ........ program needs to get all the costcenters in the group and run the cycles for those costcenters.
can any help me with .. how to get the costcenters when user enters costcenter group in the selection screen.
any suggestions would be helpful.
Thanks in advance

Try:
call function 'K_HIERARCHY_TABLES_READ'
       exporting
            e_class                     = '0101'
            e_setid                     = setid
            e_kokrs                     = '1234'
            e_mandt                     = sy-mandt
            e_master_data               = 'XXX'
            e_structure                 = 'X X0200'
            e_replace_class             = space
            e_replace_unit              = space
            e_suffix                    = space
       tables
            t_nodes                     = it_ccg_nodes
            t_values                    = it_ccg_values
       changing
            c_info                      = c_info
            c_overwrite                 = c_overwrite
       exceptions
            no_controlling_area         = 1
            no_chart_of_account         = 2
            different_controlling_areas = 3
            different_chart_of_accounts = 4
            set_not_found               = 5
            illegal_field_replacement   = 6
            illegal_table_replacement   = 7
            fm_raise                    = 8
            convert_error               = 9
            no_overwrite_standard_hier = 10
            no_bukrs_for_kokrs          = 11
            others                      = 12.

Assessment Cycle(KSU5) - Allocating Cost for Only One Month

Hi,
I want to allocate cost relating 2008 from cost centres to WBS. For that I'm trying run the assessment cycle(ksu5). The test results shows allocation of cost for the month of Sep2008. i.e It doesn't allocate cost that are posted before sep and after september though the cost centre has costs from Apr 2008. My Assessment cycle period starts from 01.04.2008 and is valid for the whole year till 31.03.2009. I've 3 WBS elements to which the costs for the whole year has to be posted according to the no. of hours. Among 3WBS one is created in the month of Apr 2008 and the other is created in Aug 2008 and the last one is create in Dec 2008.
So Can anyone tell me why the cost is not posted for all the months.
Thanks in Advance
Harikrishnan L G

Hi,
Please check the Cumulative indicator in the Assessment Cycle definition. If the Cycle is not cumulative then it would not include costs of earlier month for allocation.
Go to - KSU2 and in the Header screen you will find the check box called Cumulative.
While executing the cycle through KSU5 in the selection screen you will have to specify period from and period to. It will automatically consider all costs upto the period.
Thanks,
Sanjib

Reserval of Assessment Cycles for closed periods - FAGLGA15

Hello,
We have assessment cycles in closed periods which we want to reverse / repost in current period. We are using ECC New GL functionality. Tcode KISR does not seem to recognize Assessment cycles created with FAGLGA1* .
Suggestions / options to achieve the end result, please.
Regards
Jayesh.

Hi:
If your CO allocation has some external postings (like GL or fixed assets) or generating some intercompany documents, then it needs FI to be open also. It happens sometimes if the allocation goes external so it would need fI period to be open also. If FI is close but CO is open, it would only work for CO specific allocations and others would error out.
Please check the cycle/segment which is in error. If it is suppose to hit FI, then FI (OB52) and CO (OKP1) periods should be in sync.
Thanks.
Rahul

COPA assessment cycles for revenue postings

Dear SAP gurus,
is it possible to allocate revenues to COPA via assessment cycles (tcode KEU5)? We have service income related revenues that are not linked to COGS therefore they are posted to Cost Centers but they need to be visible in the cOPA report to have a complete profitability by product. at the moment I am not allowed as revenue are considered statistical postings... any clue how can I solve this?
Thanks
Monica

Hi Monica
Welcome to SDN!
I dont agree with the responses provided above.. As far as I know, statistical postings can neither be settled, nor can they be allocated
Catg 11 cost elements post statistically to Cost Centers.. Hence, you cant allocate...
For the postings made till now, Manually update COPA using KE21N (If you are using Costing Based COPA)
Way Forward: Make your service income postings in an Internal Order and you can settle the same to COPA and then allocate using Top Down Dist KE28...
Try note 605281 and see if it allows to use IO as senders in KEU5....
BR,Ajay M

Tables for amount of document against assessment cycle & distribution cycle

Hi,
Please let me know in which table the transaction value of document(s) are updated in CO module when we run the assessment cycle & distribution cycle ( through T Code - KSV5 OR KSU5).
With regards,
B.Padhy

Hi,
The documents are updated in COEP table.
Regards,
Eli

Distribution criteria list for receiver weighting factors in COPA segment assessment cycle

Hello guys !
I would like to add the product hierarchy in the distribution criteria list (transaction KEU3).
Is someone could give me the solution ?
Best regards
Bruno

Hi Ashok
Summ levels can be used in Assessment cycles... Your "Distribution List" tab might take time to finish...
However, I would ask you to assess your req once again... This level of allocation is more likely to cause performance issues
however, if no of docs in COPA is not much, then you need not worry
What worries me is that you cant use non-segment level chars as receivers in COPA assessment cycle.. have you specified BATCH No as segment level char in KEQ3? If yes, please undo it.. Else, you are going to face a nightmare situation
Regards
Ajay M
Edited by: Ajay Maheshwari on Jan 10, 2011 3:04 PM

BADI for Assessment Cycle

Similar Messages

Maybe you are looking for