BAdi for change for cost center prevent

Hi MM Guru's,
Is there any BAdi availble to prevent the cost center change once purchase requistion is done.
Thanks for your HELP?
Regards
Shrini

Hi Jack, I am not able find the given BAdi (ME_PROCESS_REQ_ACCT) in our system
Can you please give us correct BAdi name.
Thanks for your input.
Regards
Shrinivas

Similar Messages

  • Badi for cost center accounts

    Hi SAPERS,
    Please provide me information about, if more than one cost centers are there in Organization and we need to maintain a different G/L account for separate cost center. In this case we need to implement a BADI, what is the BADI and How we can implement. Please provide me the step by step process.
    Thanks in advance,
    Prasad

    Create a Z Table with Cost center, Product Category and G/L Accoount mapping
    Use BADI: BBP_DETERMINE_ACCT
    In that BADI call FM: BBP_PD_SC_GETDETAIL and get the Cost Center of the Shopping Cart. And read the ZTable and update the Shopping cart.

  • Table for change in cost center in Kb61

    Dear friends,
    I changed the cost center using t code KB61, From which table i can get the details of change in cost center
    Rgds
    Madhavan

    Hi,
    KB61 will post the document with the change from old cost object to new cost object in CO documents, so you can check the following tables for this posting.
    CO document Header: COBK
    CO document items:COEP
    CO summary table:COSP (or COSS)
    best regards, takashi

  • Report for Cost Center Changes Collectively

    Hi,
    I need a report to see the cost centers changes. For individual cost center, I can see in KS05 - Display Changes
    I tried to search the SAP reports, but could not find any
    Regards,
    Bhavesh

    Hi,
    I donu2019t think there is any standard repot available for it.
    You can develop your own report or query based on the Tables CDHDR and CDPOS, OBJECTCLAS = 'KOSTL' for cost center
    Regards,
    Gaurav

  • Change of Cost center for Assets --- AS02

    Hi,
    I have one asset 1234. for that Already we closed the year 2008.
    In the Asset master we are using Cost Center -- ABCD, but from 2009.04.01 m i want to change the Cost Center -- XYZ. For that i tried to change the cost center in following way;
    1. In AS02-- Time independent data-- i enter the new interval effective from 2009.04.01 then i was saving the asset master,
    But while saving one error Msg is coming
    "Automatic Transfer is not Possible for Asset 1234. "
    Details of SAP message :
    "   Automatic transfer is not possible for asset E8 840200000066-0
        Message no. AMOC 001
    Diagnosis
        You changed assignments to organizational units for asset E8
        840200000066-0. The indicator for 'time-independent organizational
        units' is set for this company code in Asset Accounting Customizin
        This means that the system is supposed to create a transfer docume
        automatically.
        However, asset E8 840200000066-0 manages one of the following:
        o   Open items
        o   Investment measures
        o   Down payments
        Therefore, the system could NOT automatically create a transfer document. "
    So please tell me , How can i change the Cost center in Asset Master.
    Sachin

    We have many company codes and all company codes have same configuration and All company code have time independent settings.So why this message is only coming for this asset class and in this company codes only. I tried in other company codes with same asset class, but its working, No error message is coming.

  • Change of Cost Center in Asset Master for Investment measure (AuC) Assets.

    Hi,
    We have an asset class 4001 which has been maintained as an investment measure for AuC. I want to change cost center for all the assets that are maintained in the asset class 4001. The system is showing cost center field in display mode in change transaction of the asset AS02 for all the assets in the asset class. I want to replace the old cost center with new cost center in the asset master record. How can I make the cost center field changeable ? 
    Can anyone help me ?
    Regards,
    K.S.K

    Hi Kattula,
    We can change the cost center for AUC with Investment Measure. To do this you need to identify the relevant WBS element assigned to your asset. You can find the WBSE in Origin tab of your asset master record.
    Then go to the change WBS element Transaction CJ12 and change the cost center. Once you change the cost center of the WBSE, the change would automatically get reflected in the correspondind asset master record.
    This would solve your issue.
    Thanks & Regards
    FICO GSupport team.
    RK & IK.

  • Change of Cost Center Assignment for Organization Unit in HR

    Hi,
    Recently my client is changing their cost center number from 6char to 5 char format. I have created customized mapping table to link between old cost center number and new ones.
    Create new cost center referencing to old cost center is done too.
    However, for each Personnel Number, i need to change the cost center assignment which link to org unit. I have done this too manually at t-code PPOM. How can I do this for mass change? I have a list of org unit number with me. Is there any standard program to do this or i should use LSMW ?
    How do I make sure for each Personnel number, their cost center assignment will change to new 5 char format in the end as required?
    I am new to HR module.
    Thank you for your help.

    Hi,
    As Sikandar said, you will have to write an LSMW or BDC ( where in you can check and validate the input Cost centers) using PP01 or Po10.
    Also I think if you use BDC or LSMW you will have to run the RHINTE30 report. Check the documentation on RHINTEXX reports to get better idea.
    Cheers..
    Ajay

  • How to run GR55 reports in background for cost center hierarchies

    1.  I have been asked by our users to create batch jobs to run in the background for some GR55 reports, that can then be sent directly to cost center managers via email.
    I have figured out the process to do this as long as the cost center manager only needs to see a single cost center at a time.  However, if they are in charge of multiple cost centers, we also want to send them a summarized report using the hierarchy we have set up.  I can't seem to make this work, as the job only seem to recognize the last cost center in the group and the report is for that cost center.
    Example.  cost centers 100, 200 and 300 belong to hierarchy abc.  If I run the job just for cost center 100 it is fine.  But if I have a variant to run hierarchy abc, or even if I use the range 100 to 300, all I get is a report for cost center 300.
    We cannot use BW because we only have revenue in BW.  I am being asked to make this work from standard R/3 within the GR55 realm of reporting.
    2.  In addition, the report selection criteria includes two separate plan/forecast versions.  They need to update these each month prior to running the reports and sending them out.  I looked at the variables associated with the versions and tried to set them up with default values that I hoped would update automatically so that they don't have to manually change 50 or so variants each month.  But I don't see any dynamic variables that I can use to have the system make that change without going into each variant individually.
    3.  There is another piece to this equation as well.  There is another report they want sent out in batch, but it is several pages wide in SAP and several pages long.  So when you run it in batch and either spool it or get it sent as an email, it is very ugly in the formatting due to all the page splits horizontally and vertically.  If anyone knows how to get the report to stay together like it would if you had excel integration turned on, it would be very helpful.  I have tried running it with that integration turned on, but the jobs are set up with user batch_mgr and not my id, so it isn't working well.  The batch_mgr id is just a system id, not a dialog id.  We also don't want the jobs set up with a regular user id because if people leave, then the jobs all need to be changed.

    Kim,
    I may have options for issues 1 and 2. In case of 3, what I can tell you is I understand the concern, but this is what  typically happens in some standard CO reports that are not ALV compatible, I don't think there is not much  there to do unless you add some custom code for the output.
    In regards to point 1, yes,  I have noticed that this happens in some standard and custom reporting, not sure what is going on. I came up with a work around that  made the trick for my client in a similar scenario; which is editing the cost center groups. For instance, instead  of having the group set as a range from 100 to 300,  the groups are have  listed the cost centers, 100, 200 and 300. Obviously, the disadvantage of  this option is  that it would require a bit of more cost center group maintenance.
    In regards to point 2,  I understand from your note  that your users already have set up selection variants for the report. One option for you is to get the help from a developer to create a custom period variable and tiny program that runs in batch every month that would update that variable accordingly. Once that's done, you may have to update at least once, the selection variant  attributes to change the period to a selection variable, so everytime from that point of time forward that the variable gets updated,  it will be ready with the right value for every selection variant that uses it.
    Hope this helps.
    GG

  • KO88 - Error when settling for Cost Center AND Auc for the same Internal Or

    Hi Experts,
    We need to configure Investment Internal Orders that could settle to both Cost Center and Auc, but each assignments with different Source Cost Elements
    We did the following:
    1. Created Auc Class
    2. Created Investment Profile "IMOBIL" and assigned to Auc Class, flagging Auc
    3. Created Allocation Structure "CV" with two assignments:
    01, Source = Cost elements 7000000000 to 7999999999, receiver AUC "by cost element"
    02 Source = Cost elements 4000000000 to 4999999999, receiver CTR "by cost element"
    4. Created Model Order, filling the Investment Profile IMOBIL created in step 2.
    5 Created Settlement Profile ZCV0001, assigning Allocation Strucutre CV, allowing CTR and AUC for receivers, default receiver is "FXA", doc type "AA".
    6 Created ORder Type CV01, assigning Settlement Profile ZCV0001.
    When I post only for Asset Expenses (Source Cost element 7, Assigment 01), the settlement through KO88 correctly settles to AUC, and also creates the settlement rule for cost center (i'm using the strategy to create from Responsible Cost Center).
    But when I post for Asset Expenses (cost elements 7, receiver AUC) AND General Expenses (Source Cost element 4, receiver CTR), KO88 generates an error KD506, saying that for Assigment 02 - AUC I didnt define a settlement cost element.
    1. Assignment 02 is not AUC, is CTR;
    2. I flagged "by cost element", so I don't need a settlement cost element. And also, I was able to post to AUC when the source posting was only for cost element 7.
    Did you face any problem like this?
    I cannot find out what is the missing configuration, or if it is a program error...
    Kind Regards
    Mayumi Blak

    Hi Ajay
    I already created Source Structure and assigned to my Setllement profile (so I assigned Allocation Structure AND Source Structure).
    I don't understand when you say that I need to assign the Source Sutrcture in each rule....because the Source structure is in the Settlement Parameters valid for both rules...
    When I post to Asset Expenses only for the internal Order, the 2 rules (CTR and AUC) are created when I run KO88 (but only AUC rule is settled). This is OK.
    The problem is when I post for both General Expenses AND Asset Expenses, the system is not recognizing that I have 2 source structures, neither is findind that for CTR AND AUC the Settlement cost elements are the original cost elements.
    I'm thinking about changing message KD506 to warning, do you know if this can help?
    Kind Regards
    Mayumi Blak

  • BPS Retraction for Cost Center Accounting - Cost Element - Compounding with

    Hello everybody,
    I'm using the "BPS Retraction for Cost Center Accounting" described in the blog from Praveen Mayalur. I have customized the BPS system  (3.5) as described.
    But if i started the retraction i receive a dump. I have debug a little bit and i found out that there is a problem with the InfoObject "Cost Element". It is compounding with two InfoObjects "Source system ID" and "Controlling area".
    PERFORM FILL_RSRDEP USING I_AREA
                              I_CHANM
                              ITO_CHADEP
                        CHANGING LT_RSRDEP
                                 L_SUBRC.
    IF L_SUBRC NE 0.
    *Abhängige Merkmale müssen in der ITO_CHADEP stehen
      MESSAGE X099(UPC).
    ENDIF.
    Does anybody have this problem before. ?
    Regards Detlev

    Hi,
    it looks that your 0COSTELEMNT has been changed and the additional compounding object 0SOURSYSTEM has bben added. In BI Content it is only compounded to 0CO_AREA. So may be this is the problem.
    To be sure that it works you must make the change in your source system to and "compound" 0COSTCENTER to 0SOURSYSTEM. Or you have to chabge the retraction that way that it ignores the source system and only reads 0CO_AREA and costcenter.
    Regards,
    Juergen

  • Add Range Selection for Cost Center in Report Painter

    Dear Gurus,
    I had a report painter which had Cost Center selection, may I know how to change the cost center selection become in range like shown in below picture?
    [Report Painter - Cost Center in Range|http://www.pikipimp.com/pp/pimped_photo/s/image/42/231/888/range-compiled.JPG?ts=1236930732343]
    Thank you very much!

    Hi,
    Thanks for your guide, is really detail ~
    I had follow your step, create a new variable set for the cost center at GS11.
    When I want to include the set (KOSTL2) into the general data selection it prompt this [error|http://www.pikipimp.com/pp/pimped_photo/s/image/42/314/153/ErrorGS12-compiled.JPG?ts=1237172967140] may I know how should I correct it?
    Is it my setting was wrong?
    Please guide if possible.
    Thank you very much!
    Warm regards

  • Activity Type ENGINE not set up for cost center

    Hi all,
    Currently, we have set up a work center in our system, which has the following intergration:
    - Controlling Area --> TECH
    - Cost Center --> TECH001
    - Activity Type --> ENGINE
    - Plant --> PN01
    - Work Center --> PL01
    Based on the above, the work center PL01 has the relationship of where Activity Type ENGINE and Cost Center TECH001 are linked together, where Cost Center is tied to Controlling Area TECH.
    However, when a user tried to create General Task List (Trxn IA05), under Work Center PL01 and Plant PN01, and inserted Activity Type ENGINE in Operation item. It gives the following error:
    Activity Type ENGINE not set up for cost center
    I have also checked KP26 that everything is setup correctly.
    Please can someone shed some light on the above?
    Many thanks and regards,
    Patrick
    PS: Full point guaranteed for helpful answer.

    Hi all,
    I have solved the issue by changing the Start Date of the Work Center. Now everything works well.
    cheers,
    Patrick

  • 2LIS_02_ITM Delta for Cost Center Does Not Work

    Experts,
        I have activated 2LIS_02_ITM extractor and it extracts delta for PO Header and Item changes. However, when I change the 'Cost Center' or 'GL Account' assignments for a PO Item, system does not generate a delta. I have to make another change, e.g. text or something to bring the related change into BW.
    Can someone please advise.
    thanks,
    Kartik.

    Hi Kartik,
        Just ensure you run a job control first on that extractor.A job control would push data from R/3 queue to BW delta queue.Then check the BW Delta queue(RSA7).Then  run the extract checker in Delta mode and check for the delta records. If everything goes fine you should find your delta records here.
    Regards,
    Harold.

  • Why time-dependent not work for cost center and profit center hierarchy

    Has anybody been able to successfully turn on time-dependent for cost center hierarchy? Looks like the R/3 datasource 0COSTCENTER_0101_HIER is defaulted to be NOT time-dependent, and I don’t know how to change the R/3 configuration to enable time-dependent for this datasource.
    Here is what I found. If you go to RSA2 in R/3 and enter datasource 0COSTCENTER_0101_HIER, and then select "Hierarchy Info", you will see that all the time-dependent properties are unchecked by default. By comparison, Cons Unit datasource 0CS_UNIT_CSCU_HIER has “Version Dependent Hierarchy” as selected, and we are able to load Cons Unit hierarchy as time-dependent, but have no luck so far with the Cost Center hierarchy.
    Can any BI guru tell me how I can make time-dependent work for the cost center hierarchy?
    Thanks a bunch!

    Check SETLEAF and SETNODE.
    Basically CO Master data groups dont have seperate tables. They will be available in above tables. Choose proper Set class to filter the results

  • BAPi for Cost Center

    hi all
    I am looking for a BAPI/Functional module  for the below mentioned SAP stan report for cost center
    S_ALR_87013611 - Cost Centers: Actual/Plan/Variance
    S_ALR_87013625 - Cost Centers: Actual/Target/Variance
    Regards
    Praveen

    hi all,
    If there is no BAPI/BADI/Functional module avaible  for cost center report ( Planned /Actual comparision)
    can you please tell me the relative CO table  from where i can get the Planned and Actual values,so that i can prepare a report based on the CO table.
    Revert
    Regards
    Praveen

Maybe you are looking for