BADI for SAP Claims Management Reporting

Does anyone has information in regards to the 2 BADI´s for SAP Claim Management Reporting.
- Business Add-In: Data Change in 'Claim Overview' Report
CLAIM_REPORT_ADD_1
- Business Add-In: Data Change in 'Claim Hierarchy' Report
CLAIM_REPORT_ADD_2
How to implement and what benefits do these BADI´s provide ?
Thanks

Hi,
This is what the documentation for the BADI says,
1) Business Add-In: Data Change in 'Claim Overview' Report - CLAIM_REPORT_ADD_1
Use
With this enhancement you can change data in the claim report 'Claim Overview'.
Do not change the key QMNUM in the transfer table pt_qmel.
Requirements
If you want to display more columns than those stipulated by SAP in the standard system in structure RCLAIM001 you must first add these additional columns to the structure RCLAIM001.
2) Business Add-In: Data Change in 'Claim Hierarchy' Report - CLAIM_REPORT_ADD_2
Use
With this enhancement you can change data for the claim report 'Claim Hierarchy'.
Do not change the key fields QMNUM, MANUM and OBJNR in the transfer table pt_qmel.
Requirements
If you want to display more columns than those stipulated by SAP in the standard system in structure RCLAIM002 you must first add these additional columns to the structure RCLAIM002.
It would be better if you could get in touch with your ABAP guys to know about how to implement these BADI's
Regards,
Gokul

Similar Messages

EWA: error message in CRM check for SAP Solution Manager system

Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name                                Status     Date of first entry             Entries
CSABUPA0000000070           READY     03.12.2007                          45
CSABUPA0000000934           READY     07.05.2008                          45
CSAIBASE0000000000           READY     23.11.2007                          36
CSA_ORDER_8000000000      READY     22.11.2007     5
CSA_ORDER_8000000001      READY     22.11.2007     3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AM

Hi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH

Requirements for SAP Document management system in ECC 5.0

Hi All,
Can any one provide me the requirements for SAP Document management system in ECC 5.0.
SAP Component   ECC 5.0
OS    Solaris 5.9
DB    Oracle 9.2.0.7
Thanks in advance.
Regards,
Surendra
<removed_by_moderator>
Edited by: Juan Reyes on Aug 6, 2009 12:49 PM

That info is available either at http://service.sap.com/pam or http://service.sap.com/quicksizer
Please do some research before posting
Read the "Rules of Engagement"
regards
Juan

Issue working with WPF client v6.1.0.3 for SAP Service Manager 4.0

Hi All,
This issue is similar to an on - going discussion - http://scn.sap.com/thread/3508608
Issue Description :
1. We installed WPF client 6.1.03 for SAP Service Manager 4.0 using SMP 2.3 SP00. We got the below error
2. To solve this error we followed the forum - http://scn.sap.com/thread/3465106 and installed the certificate following the link for installing the self signed certificate from Sybase infocenter.
3. We came to know that this is due to the SMP version. hence as suggested by SAP we upgraded the server to SMP 2.3 SP03
4. We tried to connect the WPF client and again got the error "Communication error 14"
My Question is
1. After the server upgrade from SP2.3 SP03 , do I still need to generate a certificate again ? Is yes Please guide me the steps/document to do this step
2. Is there any document which mentions how exactly we use the WPF client, the configuration to connect the SAP backend and download the Syclo Service Manager 4.0 application without any issue
Please guide
Thanks
Neha

HI Steve,
I tested with the WPF client 6.1.3.X.
I was getting a different error with the host name "Connect to server myhostname certificate is for myhostname:domain name this is not valid. Commnication error(14)
However I got the solution in one of the link where they mention to provide the complete fully qualified domain name in the server ie myhostname:domain .
This has solved the issue and the WPF client is up and running.
Thanks for the help
Regards
Neha Mahanty

Urgently required Good Installation Document for SAP Solution Manager 4.0

Hello Experts,
Iam implementing /installing SAP Solution Manager 4.0 in our scenario in a day/two. My query is tat do we need to install it APAP + JAVA based only or can we install it ABAP based only?
Secondly i needed good self prepared document for SAP Solution Manager 4.0 installation which gives me step wise step procedure in detail.Plz dont give service marketplace link as i hv already seen and checked installion guide over it ,act. i wanted self prepared doc which is of more use. The useful answers shall be surely awarded points. Requested to revert at earliest as i need this guide in a day itself.
My Email Id is [email protected] .
Regards,
Saumya

Hey Somya,
Can u plz send me the configuration guide of change request management that Rakesh had sent to you..
My Email-id is [email protected]
Plz its urgent, let me know if u want me to open a new thread so that i can reward you with points..
Tnx in advance.

Missing 0CLM_INVOICE Data Source for SAP Collections Management

I was activating BC for SAP Collections Management for BI, and it states that exist a 0CLM_INVOICE Data source.
I Look into ECC (R/3) and try to activate de datasource, but it doesn't exist.
Does anyone knows what could be the problem?
Best Regards
Jaime Benavides

Thanks a lot for the answers. We are now at BI Content Add-On 3 SP02, but the data source still doesn't appear.
We checked the R/3 system and it is on SAP BW SP 12.
any other ideas about this issue? We also have a oss message with the subjet.
Best Regards.
Jaime Benavides.

Ticket SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0

Hi,
I want to migrate all tickets from SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0 , please let me know the procedure how to migrate it.
DB Detail
SAP Solution Manager 7.0 - MSSQL( 9.00.4035)
SAP EHP 1 for SAP Solution Manager 7.0 - MSSQL(10.00.2531)
Thanks,
Kaleel

Dear Mohamed,
I was reading the post and the replies and while I think your question has been answered, I just want to make sure what you are trying to achieve. Is it a migration, where you have one Solution Manager system on SAP Solution Manager 7.0 and another
SAP Solution Manager EHP1 system and you were looking to migrate the Service Desk messages?
If you are "Upgrading" one system from Solution Manager 7.0 to EHP1 then all the messages are preserved.
If you are "Migrating" to a physically different system, then transfer of Service Desk Messages is not supported.
Please see the document [SAP Solution Manger- Conent Transfer|https://websmp204.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000608232009E]
Also Service Desk is a completely independent CRM Service, so the messages could always be archived, as has been suggested.
No depending on your scenario, is the EHP1 system brand new or is it already productive? If it was brand new, you might be able to do a homogenous system copy, and then upgrade the new system to EHP1. But if it is already productive, this would not be an option.
Hope this helps to clarify.
Regards,
Paul

SAP EHP 1 for SAP Solution Manager 7.0 configuration check

Hi All,
I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.

SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
Thanks
SM

SAP Time management reports for Ukraine

Hi All,
can anybody send me the list of Time management reports available for ukraine.
i have checked in other sites also, i am getting only standard reports, but i am not getting reports for ukraine. i have given ukraine country grouping also.
regards
Vani

Hai..
Personal Work Schedules (Report RPTPSH10)
Daily Work Schedules (Report RPTDSH20)
Attendance
Attendance/Absence Data: Overview (Report RPTABS20)
Attendance/Absence Data: Calendar View (Report RPTABS50)
Attendance/Absence Data: Multiple Employee View (Report RPTABS60
Attendance Check (Report RPTEAB00)
Attendances/Absences Overview Graphic (Report RPTLEA40)
Absence
Attendance/Absence Data: Overview (Report RPTABS20)
Attendance/Absence Data: Calendar View (Report RPTABS50)
Attendance/Absence Data: Multiple Employee View (Report RPTABS60
Attendances/Absences Overview Graphic (Report RPTLEA40)
Time Accounts
Time Leveling (Report RPTCMP00)
The Time Statement (Report RPTEDT00)
Cumulated Time Evaluation Results: Time Balances and Time Wage T
Time Accounts (Report RPTDOW00)
Displaying Absence Quota Information (Report RPTQTA10)
Displaying Time Evaluation Messages (Report RPTERL00)

Competitors for SAP Solution Manager within central system monitoring

Hello!
We currently use SAP Solution Manager (CCMS monitors from RZ20) for the central system monitoring for several SAP systems.
Are there some other tools/competitors that can also serve as central platform for system monitoring of several SAP systems?
(e.g. HP OpenView).
Many thanks!

Hello,
You may want to take a look into the EarlyWatch Alert report.
It's a weekly report that gives information about many different areas of your systems and helps you to maintain them. It helps to detect problems before they occur by analysing trends on your systems and alerting about it. It definitely may work taking a look into it: service.sap.com/ewa.
It does not have an additional cost, all you need is a solution manager.
Regards,
Daniel.
Edited by: Daniel Nicol on Apr 11, 2011 8:04 PM

Portal Implementation for SAP Land Management Module?

Hi Gurus,
Has anyone done the Portal Implementation on SAP Land Management Module?
If so please share the documnets and also Please let me know is there any Business packages available for this module?
Thanks in Advance,
Dharani

Hi chandra,
You first need to understand the requirement of the business first because if there are 600 reports in legacy system you no need to presume that you need to develop 600 coz of the multidimensional report of BI you can club so many requirements in to one report. And you have to decide, up to what extent the Business content reports would be helpful. If the BC report meets the requirement it is as simple as that to activate and use it. But if the BC report wont meet the business requirement then you need to estimate the efforts to develop. Here you need to keep in mind that the standard extractors would be fine or need to enhance or need to go for Generic extraction. And also the HCM reports are big tricky and lot of data issues would rise. By considering all this you need to plan the days of work to complete all the reports.
I hope you understood what i am trying to explain.
Thanks,
RRRR

Career for SAP Strategy management & BPC?

Hi Guys,
Could you please advise me on SAP Strategy management & BPC. How about the future for this?
Is this good for career, if I learn SSM?
Please advise me.
Thanks in advance!
Anil.

Hi Harish Bysani,
Thanks for your valuable info.
Presently I'm working on BI-BPC. Also have a scope to work on BPC that's the reason why posted.
I will involve/gain more knowledge on Finance side. Actually I dont have that much skill on it.
Basically I was Microsoft technologies and .NET programmer for last 6 years. Then I moved into SAP BW since 2 years.
Please provide me so reference links where to gain Finance related knowledge to gain.
I have assigned points to you.
Thanks & regards,
Anil.

Help required in finding out the tables for FS-Claims Management module

Hi All,
In FS - claims Management module, i need to find out from which tables we can fetch the following fields,
INSURED             : insured person
DESCINSURED     : Description of insured person
CLAIMANT     : person eligible for benefits
DESCCLAIMANT     : Description of insured claimant
OUTSTRES     : Outstanding reserve
PAID             : paid amount
INCURRED     : paid amount + outstanding reserve LOSSDESC     : loss description
Thanks & Regards,
Anil

Hi Anil,
I was searching for the fields you mentioned using SE15 and came up with lot of hits. I thought, it would be good if you do the same thing and you can find the relevant tables as might you have good idea in this area.
I will tell you the procedure and I hope it will give you good results.
1) Go to SE15 (Repository Info System)
2) Click on "ABAP Dictionary"
3) Click on "Fields"
4) Select "Table Fields" and enter description as "insured" on the right hand side panel with Application component as "FS"
5) Click "Execute" (F8) and you will lot of hits.
You need to search through it to find relevant tables for your purpose.
Hope this will give you an idea.
Regards,
Vicky
PS: Award points if helpful

TREX on Portal-Server also used for search/index for SAP Records Management

Hi all,
can a installation of the TREX on the Portal-Server (or as separate Server) used for Portal Index/search and also in parallel for searching of Content in an SAP Records Management (means full text research of records/ dossier in the SAP RM) ? Some ideas, tips or settings to keep in mind ?
THX
mario

Hi Neil,
We have exactly the same problem. We installed a new SAP E-Commerce system on Microsoft Windws 2008 R2 with TREX Version 7.10.43.00. The TREX connection is okay. Also the catalogue replication works without any problems. The SAP support means it is a permission problem on the IIS. The problem isnu2019t solved yet and the message to the SAP support is in process.
What is your effect with this link?
http://localhost:<TREXNAMESERVER>/TREXHttpServer/
Default:
http://localhost:<30305>/TREXHttpServer/
Kind regards,
Roland

Informatica PowerCenter Adapter for SAP Solution Manager

Hi
I would know if exist an adapter to connect SAP Solution Manager and Informatica PowerCenter.
Is it possible use Business Process Monitoring scenario with Informatica PowerCenter?
thanks
giovanni

Hi giovanni serreli
I think this product isn't supported yet. I checked the latest version of System Landscape Guide from here => http://service.sap.com/diagnostics => Media Library... => SAP Solution Manager Landscape Setup Guide.

BADI for SAP Claims Management Reporting

Similar Messages

Maybe you are looking for