BAdI help us to bring leaves and planned vocations to BP availability

Hi All,
Please help me Which BAdI can help us to bring leaves and planned vocations from PA30 T code to BP availability in PS.
Regards
Subhaskar

Hi friend,
I think this link will give you an idea,
http://www.urz.uni-heidelberg.de/saphelp/helpdata/DE/32/fb4d40eae76f13e10000000a1550b0/23_pt_en.pdf
This is having information about different BADI available related to TM
But i think you cant find a single BADI for all these things or
See the Standard program RPTIME00 which has all the information about overtime, Quota compensation, Absence quota as well as attendance,
Check this program i think you can find any BADI or User-Exits in it for the purpose.
If your doubt still exits post this thread in HR Forum so that you can get many related replies. Please revert back to me if you still have queries
Thanks,
Sri Hari

Similar Messages

Help with coding - MouseEnter/Leave and Click commands for animated tabbed panel

Hello!
I've asked a question similar to this but unfortunately couldn't figure it out! I'm hoping someone may be able to help now as I'm much clearer about what I need...!
Here's my Edge Animate project - http://we.tl/JEOuvnK4SX It's going to be embedded on a Muse website.
At the moment, it works well, with the animations happening as the mouse is rolled over each icon at the top. What I'd love to achieve is something very similar but with click actions - When the icon at the top is rolled over it plays and reverseplays but the panel below is only played when the icon is actually clicked - and it holds until another is clicked (so the mouse can wonder around the screen without the information dissappearing), it should then playreverse before the new one appears.
I'd also like it to begin with 'Concept' pre-selected so users can see the first panel. At the moment there's a big empty space which makes it look like there's actually something missing.
So I'd like something like this (hopefully this makes sense!):
TO BEGIN - ICON (Concept) and PANEL (Concept_1) already activated (CLICK) (see image). It would also be quite nice if this began as the user scrolled down the page as I already have a few scroll effects on the Muse project.
MOUSE ENTER:
sym.getSymbol("ICON").play('Over');
MOUSE LEAVE:
sym.getSymbol("ICON").playReverse();
CLICK:
< find currently activated "ICON" .playReverse(); >
< find currently activated "PANEL" .playReverse(); >
sym.getSymbol("PANEL").play('Over');
I've been racking my brain over this but I think I just don't know enough code! Any help would be MASSIVELY appreciated!! Thanks

Ok, i will look at mouse events.
Code to display default panel and icon requires a new line.
compositionReady:
// Default Panel: first panel
sym.getSymbol("Concept").play('Over'); // <== new line
sym.getSymbol("Concept_1").getSymbolElement().show();
sym.getSymbol("Concept_1").play("Over");
sym.setVariable("displayedPanel","Concept_1");

Ipod touch wont show up in usb or itunes help pages just bring me in circles. how can i get it to show up. I use windows xp at home and tried everything then tried a relatives computer using windows 7 and still nothing. this is an older ipod touch

the help pagers just bring me around in circles. the ipod doesn't show up in system devices under the busses. i've tried just about everything. Im using windows xp at home and though maybe it was because of that. so went to a relatives and used a brand new lap top avus with windows 7 and it wont show up here either. When i got the ipod a few days ago from a third party the only screen i could get to come up was a picture of a usb cord with an arrow pointing towards the itunes logo. I downloaded i tunes and couldn't get it to change. brought it to at&t store today they hooked it up with my usb cord to thier computer and suddenly the menu screens work and i could even get online with it yet when i try to hook it up to one of my computers it doesn't show up anywere where can i go to get this fixed and fixed quick jumping around the apple help pages have put me in a foul mood and im sick of it two days spent trying to get it to show now. im sick of waiting around i need help asap so i can return this **** thing if it turns out it is broken somehow..which i dont think it is.

What gen iPod (3,4?) did you buy?

Extend the EPM install to a new EOI and remove the old EOI's (server decommissioning). EPM version 11.1.2.1 and having essbase and planning; I understand removing EOI's is not as simple as 11.1.2.3 but any suggestion/steps would be of great help.

Extend the EPM install to a new EOI and remove the old EOI's (server decommissioning). EPM version 11.1.2.1 and having essbase and planning; I understand removing EOI's is not as simple as 11.1.2.3 but any suggestion/steps would be of great help....

Next time try to create a topic that is not the question.
There was no option to remove epm instances in 11.1.2.1, basically the cloest you get is uninstalling the products on the server and hope that some of the info is removed from the epm registry
Cheers
John

The loading date, transportation date and planned date on the STO are the same as Delivery dates.

Hi,
We have created a Intra plant STO (plant to plant in the same company code). The planned delivery date is 4 days. So if I create a STO today (27th march), the delivery date is 31st march (excl Saturday and Sunday).
During delivery creation, the loading date, transportation date and planned date are also coming as 31st march. The route determination for the given shipping point and route shows 2 days for transit and 4 hours for pick pack. There is no loading time maintained for the given combination.
Can you please advice why are the dates coming the same as delivery date during delivery creation without considering the duration maintained in route determination ?
Thanks!!!
Anuja

Hi,
This is a standard behavior of SAP in case of Stock Transfer PO.
If you want that the delivery date of receiving plant be transferred to supplying plant, please use BADI MD_STOCK_TRANSFER.
Hope this helps.
Regards,
Prashant

FDM ERPI metadata mapping with EBS and Planning

Hi,
ERP integrator metadata mapping in its showing only Planning dimension names and EBS segments ,then mapping.
suppose source(EBS) Account to Target(planning) Account,in this the EBS member codes and planning memeber codes are different ,
how can i know this mapping is happend,
If possible to see all the members?,and connect each and every member?,
Can you please...
regards,
SV

Thanks for your help. I hit against another issue though.
On clicking on Open Source document, an error page opens up with an error - HTTP: 400 Bad Request.
On checking the properties for this page I noticed that the address for the url is
res://ieframe.dll/http_400.htm#http://localhost:6550/workspace/index.jsp
My workspace is on port 80.
6550 is the ERPI port.
The url should have read localhost/workspace/index.jsp
Is there some settign that I am missing.
Thanks.

Financial report for essbase and planning application

Hi,
Can any one please explain me what is the difference between creating financial report for essbase application and planning application.
Considering we will have Essbase cube for the planning application
Thanks in advance

Correct, the data that is stored in Essbase will be the same regardless of which connection type you use.
Data that is only stored in Planning can only be retrieved using a Planning connection. This includes Supporting Detail and SmartLists as these are stored in the Planning relational database.
As a general rule I always use an Essbase connection unless i specifically want to get supporting detail or smartlists but that is just me.
Hope this helps
Stuart

Rolling forecase for Actual and Plan

Hi
Iam working on Rolling Forecast for Actual and Plan report.. My Planning here is Quaterly based so for example say we plan it on April so the months after april (May - Dec) would be Planning. So when my month keeps on moving the forecase also moves..
So can you please guys help me to get out of this with an solution..
Thanks

Hi,
If you are using BI-IP for your scenario of forecasting then you can refer to the below links for forecatsing strategies.
http://help.sap.com/saphelp_nw70/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
for forecasting strategies
http://help.sap.com/saphelp_nw70/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
If you are using SEM-BPS you can consult these links:
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
Forecast (old)
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
Forecast(Exit)
http://help.sap.com/saphelp_sem60ep1/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm
Regards,
Priyanka Singh

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

Help with ibook G4, Freezing and wont turn on :-(

Can anyone help a fellow MacLady?
I have an ibook G4, her her a year with no problems,
2 days ago cursor froze, and I turned off and restarted and am left with a blank screen.
Every now and then it starts up, all my documents are there, connects to to wireless ok, and last for anything from 5mins to 1hr. Then freezes again.
Took it to a local PC man who looked and said he doenst really know apples but guessed it was Hard Drive.
Have no lost NO information from the PC, its all backed up now thankfully as I do occassionaly get access to it, though all my 876 entourage emails have strangely dissapeard. Aghhhhhhhhhhhhhh
Have an appointment with a "Genius" in Bluewater on Wednesday (earliest they can see me), but just wondered if anyone knew what the problem might be and how much I am maybe looking at for a repair? As the PC man told me to buy a new one as this will cost hundreds.
I work from home so not been able to print or do hardly anything so am running out of time
Thanks for any help, the PC is here next to me (am on my old Win one, blergh) so if anyone can help or give advice I would really appreciate it,
Thanks for any help in advance.

Hi LadyMacB and welcome to Apple Discussions.
First of all see if you can start up inSafe Mode.
Safe Boot takes longer than normal startup.
What is Safe Boot, Safe Mode.
If you are able to start up in Safe Mode and reboot into normal mode this may, in itself, be enough. If not restart in Safe Mode, if you are able, & put your OS X install disk in and restart holding the C key until you see the spinning gear wheel. When you get to the Language screen select your language and select 'Next'.
At the top of the screen towards the left in the menu bar select Utilities>Disk Utility. Select the Drive name at the very top, then look at the report at the bottom of the window. Amongst everything else you will, hopefully, see S.M.A.R.T. status 'Verified'.
If it says 'Failing' then your PC bloke is spot on. Be grateful that you were able to get everything backed up. Otherwise proceed…
Select your OS volume 2nd down in the left hand box, then click the 'Repair Disk' button. Leave Disk Repair to run, If it reports that repairs were made select 'Repair Disk' again until you get the message that the Volume appears to be OK. If DU reports at any time that it could not repair then third party utilities may be necessary or, irrespective of the S.M.A.R.T. status report, your HD may be shot. Try the above for starters and report back.
Best of luck,
Adrian

Business Rules and Planning Login Error

Hi Experts,
Today with the help of our DBA we migrated all the Production Planning Oracle database to Planning development database.
But after all, we restarted all the services and after that when we are connecting to the Console and Planning application we are getting log in erros and in console it is successfully opening all the administration services but giving fail to login to HBR.
When i login into the Planning application I am getting this error.
"Unsuccessful logon check for details"
We are using Planning 4x and Essbase 7x.
Please suggest me.
Edited by: 795788 on Jun 14, 2011 11:03 AM

I guess I did not read your post carefully before this. Did you just copy application databases or planning system database too? You probably just needed to copy application databases for copy applications from prod to dev.
You cannot log in because of difference in user authentication. when you add a user to any system, it translates that userid into a ID that identifies the user according to external system you may be using. However, if you are using PROD to connect to prod MSAD but using dev to connect to dev MSAD (or other), they potentially resolve in different internal IDs. My suggestion would be to drop planning tables and recreate/reconfigure planning in dev. Then create your applications in dev. After creating application shells, you can ask DBA to copy database for applications into application databases followed by copying essbase apps from prod to dev. For HBR, you should just export rules from PROD and import to DEV. Its more involved but much cleaner.

Windows Server 2003 and Microsoft Assessment and Planning tool (MAP)

Preparing for the end of support for Windows Server 2003 (4/2015) and the need to migrate from Windows Server 2003, I have been directed on several sites run the Microsoft Assessment
and Planning tool (MAP) to aid in identifying any software and hardware issues. Apparently this tool has been recently updated (7/2014) and cannot be installed on a Windows Server 2003 system. As it requires .NET Framework 4.5 to run. Unfortunately,
.NET Framework 4.5 cannot be installed on a Windows Server 2003 as it only supports .NET 4.0.x versions. All older version links to the MAP tool have been updated to link directly to version 9.1. Where can I get a MAP tool version that will run
on Windows Server 2003?

Hi,
Yes, i would agree with arnavsharma
After the environment scan has been completed in Windows Server 2008r2 or another supported OS, MAP looks at computers running earlier versions of Windows.
http://technet.microsoft.com/en-us/magazine/ee677580.aspx
Meanwhile, for the MAP related issue, you'd better ask in MAP forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=map
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT204053 I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and

I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?

Heya Katie!!
So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!!

I have some days ago started updating of Firefox for Mac OS 10.6.8 under Help but it is paused and the upgrading don´t continue when i start again

I have some days ago started updating of Firefox for Mac OS 10.6.8 under Help but it is paused and the upgrading don´t continue when i start again

Hi Ryan,
I managed to find this reference specifically for restoring on Snow Leopard:
If you are using Mac OS X Snow Leopard, start your computer from the installation disc. Then use the "Restore From Time Machine Backup" utility.
Now that was copied from this more comprehensive reference:
Mac Basics: Time Machine backs up your Mac
You may also find this article helpful:
http://pondini.org/TM/14.html
Finally, I cannot see why Time Machine would leave out your playlists and ratings? Think about it. Why would Time Machine specifically copy everything BUT your playlists and ratings? Ryan, what are your options? I would have to ask you this: Are you certain that you properly did the sync? That is another/different forum altogether: Using iPhone /see subsection on Syncing.
Either way...
Best Regards,
mm
EDIT: For whatever reason I tried three times to edit out one of the redundent adjectives... either different or another which preceeds the word forum, but the advanced editor would (apparently NOT allow me to do so). I hope that it doesn't render without any adjective before the word forum.

How to add "Cost Plan Version" and "Planned Cost" into CNE5 report?

Hi,
I would like to display Cost Plan Version(VERSN) and Planned Cost in the CNE5 report.
How to retrieve Planned Cost that based on the Cost Plan Version ?
Appreciate helps. Thanks.
Regards,
See Mun

Plan versions: A plan version is created in accounting and stores different cost plans for a project, such as an "optimistic" and a "pessimistic" plan.
Now coming to plan version 0 is verson where actaul cost is updated in your organisation.
Plan version 1 is used for the planning...
How to see the same in CJE5 is suggested by Virendra..
However there is no filed name planned cost in report but the name of the filed is Proj.cost sched.000
with which you can achieve your result.
path is run txn CJE5>give your Project no.> F8> in new screen> F5-->in new Window scroll down in the right side for the Proj.cost sched.000 filed > with select take the same to left side>Enter--> values will displyed for this field in your report.
similarly you can use the other fields as well... take help of F4, to know the meaning of fileds.
Regards
Nitin
Edited by: Nitin Patoliya on Jan 17, 2009 11:18 AM

BAdI help us to bring leaves and planned vocations to BP availability

Similar Messages

Maybe you are looking for