BAdi HRPAD00INFTY - Dynamically change the value of Wage amount in Infotype

Hello all,
I am implementing BAdi HRPAD00INFTY for infotype 0008.
The requirement is, whenever user checks/saves Infotype 8, System should look out FTE wage type exists or not. If it exists then amount should be calculated and get updates for that wage type. If wage type not found insert wagetype FTE and amount in the infotype for the employee.
I have calculated amount in method AFTER_INPUT of the BAdi. I am trying to reflect the updated amount on the screen using method CL_HR_PNNNN_TYPE_CAST=>PNNNN_TO_PRELP. but it is not working.
I also tried to use the same method CL_HR_PNNNN_TYPE_CAST=>PNNNN_TO_PRELP in BEFORE_OUTPUT method.
Can somebody help me on this?
Any pointer would be helpful and appreciated.
Thanks in advance.
Best Regards,
Dharitree

Added by Jeyhun Hajiyev - Azerbaijan Baku DemirBank 05.04.2010
Function EXIT_SAPFP50M_001 INCLUDE ZXPADU01
DATA : lv_message_handler TYPE REF TO if_hrpa_message_handler
           , wa_0008 LIKE p0008
FIELD-SYMBOLS: <fs_p0008> TYPE ANY.
IF innnn-infty = '0008'.
CLEAR : lv_plans
        , ls_hrp1005
        , lv_result
Transfer the structure p0008 from INNNN
ASSIGN ('INNNN') TO <fs_p0008> CASTING TYPE p0008.
CHECK sy-subrc = 0.
MOVE <fs_p0008> TO wa_0008.
u201COR
CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
EXPORTING
PRELP = INNNN
IMPORTING
PNNNN = WA_0008.
u201CChanging in Infotype 0008
      wa_0008-trfst = '01'.
      wa_0008-lga01 = '1000'.    "FOR SEE RESULT YOU MUST ADD THAT LINE
      wa_0008-bet01 = 100. " $ Amount for Q0008-BETRG
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
      pnnnn = wa_0008
    IMPORTING
      prelp = innnn.
ENDIF.

Similar Messages

Dynamically change the value in standard text

Hi all,
I have created standard text using SO10 transaction. I have included the text id in SAP FORM. My requirement is some text need to change dynamically in the text when printing the form.Is there any way to do it.
Thanks
Suadrsana

Hi .. Here is the solution ...
Hi &V_NAME&
Thanks
XXXXXXXX
U need to get the value of
V_NAME
from the SF.
If u have the value of the variable in an internal table, then
LOOP AT ITAB INTO WA.
V_NAME = WA-NAME.
ENDLOOP.
I think this will be useful.
Suhas
Message was edited by:
Suhas Saha

Dynamically change the value in order by clause (urgent)

Could any one help atall with this.
I have a cursor within a procedure and i want to be able to pass parameter into the procedure so that the record fetched by the cursor can be ordered by the parameter passed in.
For instance
create or replace procedure select_all(p_order_by in varchar2) is
cursor r_cur (c_order_by in varchar2) is
select empno,empname,job,manager,salary
from emp
ordry by c_order_by;
r_rec r_cur%rowtype;
lv_order_by varchar2(30);
begin
lv_order_by := p_order_by;
for r_rec in r_cur(lv_order_by) loop
dbms_output.put_line(empno||empname||job||manager||salary);
end loop;
end;
I have obviously done it as written above but the output is not ordered by the value i passed into the procedure when ran. Is the a better way to achieve the desired result?

I handle dynamic order by using dynamic sql
create or replace procedure select_all
               (p_order_by in varchar2) is
TYPE               RefCurTyp is REF CURSOR;
CV                    REFCURTYP;
v_sql_stmt VARCHAR2(4000) ;
r_rec r_cur%rowtype;
BEGIN
v_sql_stmt := 'select empno,empname,job,manager,salary '||
                            ' from emp ' ||
                            ' ORDER BY '||p_order_by ;
open CV for v_sql_stmt;
loop
        fetch CV into r_rec ;
                exit when CV%NotFound;
        dbms_output.put_line(r_rec.empno||' '||r_rec.empname||' '||r_rec.job||' '||r_rec.manager||' '||r_rec.salary);
end loop;
close CV;
end;

Dynamically changing the value in table control

Hello Every one,
In MD61 transaction table control am trying to change value dynamicaly i.e am trying to change value in table control automaticaly tht value to be captured and i need to show in status bar...
Ex table control field is number: am giving 10,20,30 tht should show in status bar by adding if u enter 10 at status bar it show 10 then when u enter 20 it should add with 10 and give 30 ..
in this way when ever u enter value in filed it should add with the status bar value.

Hi!
For conversion you can use the function module
data :   w_amt         TYPE cms_dte_original_amt,
                                                                                " Amount
            w_conv_amt    TYPE cms_dte_conv_amt,
                                                                                " Converted amount
            w_kmein       TYPE cms_dte_original_curr,
   CALL FUNCTION 'CMS_API_CURR_CONV'
        EXPORTING
          i_original_curr = w_kmein
          i_original_amt = w_amt
          i_result_curr   = 'INR'
          i_rate_type     = 'M'
          i_conv_date     = sy-datum
        IMPORTING
          e_conv_amt      = w_conv_amt.
now accordingly you can move the currency and amount that is changed....
here as you were saying that on f4 after selecting you want the other field to get the value on that currency.....
this work can be done as here....
in this the next field gets populated as the first field gets the value......
refer to it.....
https://wiki.sdn.sap.com/wiki/display/ABAP/GettingainputfieldpopulatedonenteringthevalueinoneInputfield
Regards.

Dynamically change the value of a select list in form based on a table

Hi Friends,
I am using a form based on a table. I want to display two fields as select lists instead of text boxes and when a value
in a select list is selected, the corresponding values will be listed in the next select list. For example if department
value is selected in a select list the employees in that department will be listed in the employee select list. I saw a
metthod using ajax for achieving this in tabular form in Denes's sample application[Click Here| http://apex.oracle.com/pls/otn/f?p=31517:176:462842537250908::NO] .
Is there any way to achieve the same for a form based on a table,
Thanks,
Tj

Hi Andy,
Could you tell me how I could use your example with multiple Application Items?
My page has 3 cascading select lists. The second is dependent on the first and the third is dependent on both the first and second. I thought I would just need to add the second application item as a get, but not sure what the syntax would be. I have troubleshooted to the point where my select list refreshes when I have one in the javascript...just not sure how to add the additional one?
Here's what I have (I have been referencing your 'Get Employees' page)
My Page Items:
P0_VENDOR_ID
P0_VENDOR_SITE_ID
P0_INVENTORY_ITEM_ID
My Application Items:
F_VDR_ID
F_VDR_SITE_ID
My query in the application process has both F_VDR_SITE_ID and F_VDR_ID in it.
My javascript function...this worked OK until I added the additional get.add('F_VDR_SITE_ID')
function getItems(filter, listName)
var xml = null;
var list = document.getElementById(listName);
var listvalue = list.value;
var get = new htmldb_Get(null,$v('pFlowId'), 'APPLICATION_PROCESS=Set_Items',4);
get.add('F_VDR_ID', filter.value);
get.add('F_VDR_SITE_ID', filter.value);
ret = get.get('XML');
if(ret)
var s = ret.getElementsByTagName("select");
if(s){
var o = ret.getElementsByTagName("option");
var oCount = o.length;
list.options.length = 0;
for(var i = 0; i < oCount; i++){
var l_Opt_Xml = o;
appendToSelect(list, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue);
list.value = listvalue;
if (list.selectedIndex == -1)
list.selectedIndex = 0;
get = null;
Thanks,
Janel

OBIEE 10g AGO Function Dynamically Change the Heading

I created columns in my rpd named Sales Previous Month, Sales 2 months ago and Sales 3 months ago using the AGO Function. This is working fine.
My problem is when displaying these headings the users would like to see the Month Name instead of the Headings I created. For example if looking at a report for January the users would like to see:
Sales Previous Month = December
Sales 2 Months ago = November
Sales 3 Months ago = October
Is there any way to dynamically change the value of the column header to show the name of the month?

Hi SriniVEERAVALLI,
Thanks for the reply. I have found that I might haven't created the relationship between dimension and fact tables correctly.
I initially created the foreign key relationship (instead of creating complex join) in physical diagram between the dimension and fact table. And the relationship type is hence greyed out.
I have deleted the foreign key relationship in physical diagram. Then
1. In physical diagram, create complex join between dimension and fact . The relationship is 'inner' and can't be changed.
2. In Logical table diagram, create foreign key between dimension and fact . The relationship can be changed (inner, outer, etc).
Is this the correct way?
I tried these on two newly created dummy tables and it worked.

Issue using JS to change the value of an output text component dynamically

I am developing an application and I need to change the output text component value at run time when the mouse moves over a field. I am using javascript and then using UIComponent.setproperty to change the value.
I am not able to do this and am getting nothing.
Kindly let me know what am I doing wrong
I am using ADF 11g (10th November release).
Regards,
Deepak

Hi i'm doing the same thing with an input text
here is my code
jspx:
<af:inputText value="#{bindings.MiddleName.inputValue}"
label="#{bindings.MiddleName.hints.label}"
required="#{bindings.MiddleName.hints.mandatory}"
columns="#{bindings.MiddleName.hints.displayWidth}"
maximumLength="#{bindings.MiddleName.hints.precision}"
shortDesc="#{bindings.MiddleName.hints.tooltip}"
id="it4" autoSubmit="true">
<f:validator binding="#{bindings.MiddleName.validator}"/>
<af:clientListener type="valueChange" method="mo_UpperCase"/>
</af:inputText>
js:
function mo_UpperCase(event){
var inputField = event.getSource();
if (event.getNewValue().toUpperCase()!=event.getNewValue())
inputField.setValue(event.getNewValue().toUpperCase());
In my case i change the input text to upercase when the value is changing
I hope it works with output text also,
change my examples clientlistener type from valueChange to mouseOver
If you have more than one component and you need to pass parameters check this thread also:
bug at af:clientAttribute 11.1.1.2.0
Tilemahos

Is it possible to programmatically change the value of a LV8.2 project symbol at runtime?

I need to programmatically change what a conditional disable structure will execute at runtime. (See this thread for more details if you're interested.) As far as I can tell the only way to do this is to change the value of a project symbol at runtime.
I've tried to find a property that allows me to do this but so far it eludes me.
Anyone know how to do it?
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle

This is definetly not possible. When the conditional disable structure is compiled, only the actual case is compiled. The other cases don't even have to have valid code, they can have broken wires or bad VI's in them!
Like Mike suggested, you need to load VI's that do the task dynamically.
Regards,
Wiebe.

How do I change the value of the Order By field in an MP3 file?

good day Guys,
I'm new here in the forum and I have a question that is "breaking" the order of my songs and my head too ...
How do I change the value of the Order By field in an MP3 file?
for example, in the photo below, the song "The Bad Touch" is coming BEFORE the song "A Little Respect", this happens because of the Name field to Order ...
My "problem" is in the photo below, the "tab" Order, iTunes will not let me erase what is written in the "Sort As" ...
I've been "collecting" several songs over SEVERAL years
I'm currently with more than 1,500 songs on HD and several backups on DVDs and external hard drives and I think, download it again, will be a "little" laborious and boring
I DON'T WANT to be filling the tags of songs (name, singer, CD, year, etc.)
I have used the program Mp3tag to remove the music tags
I've tried to download the song again and go through Mp3tag program as if it were a new song
I've changed the music access permissions, folder and even entire hard drive (my Windows has only one user)
I've tried to catch the song again, from a previous backup
I've tried to create a copy of the file at iTunes own
I've tried to create a new music file in a music recording program
NOTHING of what I did above resolved
-> I'm using Windows 7 64-bit Ultimate
-> I'm using iTunes 12.1.1.4 for 64-bit Windows
-> My iPad is the third generation (a little old, I know) with Wi-Fi and 3G, but it has served me VERY WELL
-> The iPad is updated with iOS 8.1.3 and is not unlocked
I'm sorry for the GIANT post, but well, I think I could explain as much as possible and for my English, too bad, by the way, I'm from Brazil and I'm using Google translator
Hugs and await answers,
Paulo Ricardo

hello turingtest2,
my language is Brazilian Portuguese (there are some little differences between Brazilian Portuguese and the Portuguese of Portugal, but nothing that interferes with the script)
at this time, I'm managing songs manually, I don't know if this will interfere with the execution of a script or command
as I picked up this iPad recently, I still don't understand how to set up the iTunes Music Library and the person who gave me, told me it was easier to put the songs manually
as you said, in my iTunes, 95% of the songs are with ALL the blank fields, including the Name to Sort field, only songs that begin with a/an/the standing with the Name to Sort field filled with name of the song, without the a/the
I do not know what to do...
I want to learn to ride the iTunes Music Library, that my work is less
you know any site that teaches create/manage my iTunes Music Library?
this site/forum may be in English, no problem
thanks for all your help and the help of others who responded to my request

How to dynamically change the text of a TextObject with embedded DataField?

Hi
I'm trying to dynamically change the text of a TextObject at runtime, by using the .NET library. My problem is that if one or more DatabaseFieldDefinition is embedded inside my text, I'm unable to change the "static text" only, by keeping the field, e.g. I have :
Text1 => "Contact Name: {Contact.Name}"
and I'd like to change it to anything else like:
Text1 => "Nom du Contact: {Contact.Name}"
Half of my TextObject is static text while second part comes from the dataset.
(of course the translation is dynamic - it is called at run-time and the new value to be set depends on the calling application language)
If I simply modify the Text property of my TextObject, the {Contact.Name} embedded field is not evaluated anymore by the Crystal Engine, but considered as a single text.
Using formulas or parameters looks quite difficult, because it means having many ones just for translation needs - I cannot control the way my users will create their reports and "force them" to use complex methods just in order to put a text and a value together...
Anyone knows how to deal with that ?

Only way I can think of doing this:
1) Create a formula (call it lang) and enter the string "Contact Name" in it
2) Place the {Contact.Name} field next to the string
3) So now you have:
ContactName: {Contact.Name}
4) Check what localization you are after. If you need "Nom du Contact", change the lang formula so it shows "Nom du Contact" using the code below:
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Inherits System.Windows.Forms.Form
Dim Report As New CrystalReport1()
Dim FormulaFields As FormulaFieldDefinitions
Dim FormulaField As FormulaFieldDefinition
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
FormulaFields = Report.DataDefinition.FormulaFields
FormulaField = FormulaFields.Item(0)
FormulaField.Text = "[formula text]"
CrystalReportViewer1.ReportSource = Report
End Sub
I realize this may not give you consistent spacing as the translations may have strings of differnt length. Perhaps someone has other idea(s)...

Is it possible to change the values of fields In Me21n tansaction?

I Have to put in some logic to change the values of already existing Shipping condition field in the SHIPPING subscreen at the Line item level in ME21n transaction.
I searched for the user exit to do soo. Did not find anything to do this. I would like to know if it is possible through some other way.
thanks
shubha

Hi Shubha!
You might use BAPI_PO_CHANGE. Even if there would be a user exit / BADI, then execution is not sure.
You said: 'already existing shipping field' -> exits of a transaction are only executed during maintenance, not afterwards.
So maybe you have to make your changes completely outside of PO.
Still have a look at BADI ME_PROCESS_PO_CUST, there are a lot of methods and one might help you.
Regards,
Christian

How to change the value of Label in runtime

Hi All,
I want to change the value of the Label in runtime. Is it possible to change? If so then can you please let me know how to do it?
Regards,
Raghu

Hi Ram,
Check the below thread
Dialog program - label problem
The above thread has been updated just couple of hours ago only
if it is Standard Screen then try using SHD0 Tcode , but this donot dynamically change the Field labels
for more info go through Transaction Variants might be helpful,
This demands Field Exits to be implemented
Cheerz
Ram

Dynamic change the ALV layout

Alle experts:
In ALV layout report, how to dynamic change the layout int ABAP porgram?
e.g. I have save 5 layout, I need to change them base the my selection in ABAP program? How to do this?
Thanks in advance!

Try to call fieldcatlog dymnamically. Refer tofollowing code. Reward if helpful.
REPORT zfir0001 MESSAGE-ID ztax.
                           Tables
TABLES : glt0, t001, skat.
                      Internal Tables
DATA: BEGIN OF itab OCCURS 0,
        racct               LIKE   glt0-racct,    "Account number
        txt20               LIKE   skat-txt20,    "G/L account short text
        co_1000          LIKE     glt0-hslvt,     "Balance carried forward for company code 1000
        co_1100          LIKE     glt0-hslvt,     "Balance carried forward for company code 1100
        co_1200          LIKE     glt0-hslvt,     "Balance carried forward for company code 1200
DATA : BEGIN OF itab1 OCCURS 0,
         bukrs LIKE glt0-bukrs,
         waers LIKE t001-waers,
       END OF itab1.
DATA : BEGIN OF it_itab1 OCCURS 0.
        INCLUDE STRUCTURE glt0.
DATA : END OF it_itab1.
                      Data Declarations
DATA : w_total   LIKE glt0-hslvt,
       w_count   LIKE glt0-bukrs,
       w_flg     TYPE c,
       lv_count TYPE i.
      w_slash   TYPE c VALUE ' '.
                      Selection screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE tit1.
SELECT-OPTIONS : s_bukrs FOR glt0-bukrs OBLIGATORY,
                 s_racct FOR glt0-racct OBLIGATORY,
                 s_ryear FOR glt0-ryear OBLIGATORY,
                 s_rldnr FOR glt0-rldnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
tit1 = 'Please select:'(004).
TYPE-POOLS: slis.                                 "ALV Declarations
DATA: i_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
        gd_tab_group TYPE slis_t_sp_group_alv,
        gd_layout    TYPE slis_layout_alv,
        gd_repid     LIKE sy-repid.
********Geting the selected company code in table itab1****
START-OF-SELECTION.
IF NOT s_bukrs-high IS INITIAL.
    itab1-bukrs = s_bukrs-low.
    APPEND itab1.
    w_count = s_bukrs-low.
    DO.
      IF s_bukrs-high = w_count.
        EXIT.
      ELSE.
        w_count = w_count + 1.
      ENDIF.
      SELECT SINGLE * FROM t001
          WHERE bukrs = w_count.
      IF sy-subrc = 0.
        itab1-bukrs = w_count.
        APPEND itab1.
        CLEAR itab1.
      ENDIF.
    ENDDO.
ELSE.
    itab1-bukrs = s_bukrs-low.
    APPEND itab1.
ENDIF.
SELECT * FROM glt0 INTO CORRESPONDING FIELDS OF TABLE it_itab1
          WHERE rldnr   IN s_rldnr
          AND   bukrs   IN s_bukrs
          AND   ryear   IN s_ryear
          AND   racct   IN s_racct.
SORT it_itab1 BY bukrs.
LOOP AT it_itab1.
    AT END OF racct.
      w_flg = 'X'.
    ENDAT.
    SELECT SINGLE txt20 INTO (itab-txt20) FROM skat
              WHERE spras = sy-langu
              AND   saknr = it_itab1-racct.
    PACK it_itab1-racct TO it_itab1-racct.
    itab-racct = it_itab1-racct.
    w_total = it_itab1-hsl01 + it_itab1-hsl02 + it_itab1-hsl03 + it_itab1-hsl04 +
              it_itab1-hsl05 + it_itab1-hsl06 + it_itab1-hsl07 + it_itab1-hsl08 +
              it_itab1-hsl09 + it_itab1-hsl10 + it_itab1-hsl11 + it_itab1-hsl12 +
              w_total        + it_itab1-hslvt.
    IF w_flg = 'X'.
      READ TABLE itab1 WITH KEY bukrs = it_itab1-bukrs.
      IF sy-subrc = 0.
        SELECT SINGLE * FROM t001
            WHERE bukrs = itab1-bukrs.
        IF t001-waers = 'JPY' OR
           t001-waers = 'HUF'.
          w_total = w_total * 100.
        ENDIF.
        CASE it_itab1-bukrs.
          WHEN '1000'.
            itab-co_1000 = w_total.
          WHEN '1100'.
            itab-co_1100 = w_total.
          WHEN '1200'.
            itab-co_1200 = w_total.
        ENDCASE.
        COLLECT itab.
        CLEAR: itab, w_flg, w_total.
      ENDIF.
    ENDIF.
ENDLOOP.
SORT itab BY racct.
IF NOT itab[] IS INITIAL.
    PERFORM field_cat1.
    lv_count = 1.
    LOOP AT itab1.
      PERFORM field_cat USING itab1-bukrs.
    ENDLOOP.
    PERFORM display_alv_report .
ELSE.
    MESSAGE s000 WITH 'No records Found'(003).
ENDIF.
*&      Form display_alv_report
      text
FORM display_alv_report .
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = gd_repid
      is_layout          = gd_layout
      it_fieldcat        = i_fieldcat[]
      i_save             = 'X'
    TABLES
      t_outtab           = itab
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
ENDFORM.                    "display_alv_report
*&      Form field_cat1
      text
FORM field_cat1 .
i_fieldcat-col_pos     = 0.
i_fieldcat-fieldname   = 'RACCT'.
i_fieldcat-seltext_m    = 'Account'(001).
i_fieldcat-fix_column = 'X'.
i_fieldcat-emphasize   = 'X'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-col_pos     = 1.
i_fieldcat-fieldname   = 'TXT20'.
i_fieldcat-seltext_m    = 'Description'(002).
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
ENDFORM.                                                    "field_cat1
*&      Form field_cat
      text
     -->XV_BURKS   text
FORM field_cat USING xv_burks TYPE char4.
lv_count = lv_count + 1.
i_fieldcat-col_pos     = lv_count.
CONCATENATE 'CO_' xv_burks INTO i_fieldcat-fieldname.
i_fieldcat-seltext_m    = xv_burks.
i_fieldcat-just = 'C'.
i_fieldcat-no_zero = 'X'.
i_fieldcat-do_sum = 'X'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
ENDFORM.   "field_cat
Edited by: dhanashree wadkar on Apr 30, 2008 6:00 AM

Dynamic changing the LOV

Hi
we are facing some problem in Dynamic Changing the LOV.
Lets assume the below scenario.
I have tables like location and department table.
In location table i have values like country name and location. For one country there will be multiple locations.
First i need to show the unique country names in LOV. based on the country selection i need to show locations.
all we need to achieve in same page meaning i have two lovs in one page. first one is country and second one is locations.
pls. help us to resolve this issue.

Why wouldn't you put two items (visible=no) on page; first of them with "select distinct..." of country on record group for LOV1 and the second with LOV2 with locations, depending of values in item1 where you took value from LOV1?

Exit to change the value of eban-ekgrp and ekko-ekgrp

Hi all,
which user exit is the best to change the value of eban-ekgrp and ekko-ekgrp

Hi Deva,
My client wants to control the desired purchasing group matched with material group during creating/changing OA, PR & PO.
So I created customised screen to map between purch group & mat. group .
I have to find the appropriate exit/BADI to change the pruch. group regarded the mat. group is found in the customised screen.
For PR/PO, i have found the BADI, for OA , i still dont know which exit to use .. pls advise..
thanks,
Ester
Message was edited by:
ester johannes

BAdi HRPAD00INFTY - Dynamically change the value of Wage amount in Infotype

Similar Messages

Maybe you are looking for