BADI HRPAD00INFTYDB

Hello,
We want to raise an error message from the BADI HRPAD00INFTYDB.
Do anyone of you know how we can achieve this.
There is no parameter related to messages imported into the class interface.
when we raise the exception for the class, its not sending the required message.
Is there any way, we can update the common messages table so that the system will automatically handle afterwards.
Kind Regards,
Anil

We tried passing back the message filling in the message_tab. the problem we faced is, its showing a short dump from ESS when we pass an error message. We have used a different BADI PT_ABS_REQ to overcome this.
Thanks for your reply.
Anil

Similar Messages

  • Getting Exception when implementing badi 'hrpad00inftydb'

    Hi friends..
    My need is to update infotype 0207 when ever employee changes address thru ess.
    I implemented the badi 'HRPAD00INFTYDB' and inside it called 'HR_MAINTAIN_MASTERDATA'. But its giving the following two exception :
    1. Exception 'CX_HRPA_VIOLATED_PRECONDITION' occured in the    
        procedure "INITIALISE_PS_ADAPTER'.
    2. Exception named 'cx_sy_ref_is_initial' occured in the procedure 'HRXSS_PER_CLEANUP'.
    I have checked the implementation by running it separately. It is working fine and is updating 0207.
    Bt when i do the address change through portal, it is giving the above mentioned exceptions.
    Please post a solution, if possible.
    Thanks and Regards.
    abhi

    encountering the same error
    anybody has answer to these? why is the standard old FM for updating infotypes is not supported by this BADI?

  • Exception in implementing badi " hrpad00inftydb"

    Hi friends..
    My need is to update infotype 0207 when ever employee changes address thru ess.
    I implemented the badi 'HRPAD00INFTYDB' and inside it called 'HR_MAINTAIN_MASTERDATA'. But its giving the following two exception :
    1. Exception 'CX_HRPA_VIOLATED_PRECONDITION' occured in the    
        procedure "INITIALISE_PS_ADAPTER'.
    2. Exception named 'cx_sy_ref_is_initial' occured in the procedure 'HRXSS_PER_CLEANUP'.
    I have checked the implementation by running it separately. It is working fine and is updating 0207.
    Bt when i do the address change through portal, it is giving the above mentioned exceptions.
    Please post a solution, if possible.
    Thanks and Regards.
    abhi

    Hi...
    thnx for d reply..
    yes..tht i checked thoroughly..
    and anyways i independently executed my implementation, it is working fine.
    Thnks and Regards
    Abhi

  • BAdI HRPAD00INFTYDB is not called

    Hi there!
    I encountered the problem that the BAdI HRPAD00INFTYDB is not called on any update of infotype 2002. The mentioned infotype is updated by the report RPTARQPOST, after this update I want to have some code executed in th method UPDATE_DB. We are using ERP2005 an EP7.
    In addition I implemented my code in BAdI HRPAD00INFTY, too. But this one is not called either.
    Maybe somebody could tell me if one of the BAdI are called at all!?
    Thanks and best regards,
    Michael

    Hi,
    Have u activated your BADI?
    Go to se19 n create implementation for the concerned badi there.
    Click on the method in which u want to add ur code..save code and check it.
    Go back and then activate the BADI.
    Regards,
    Manoj.

  • Ess wda: updating Iban for insert/copy/modify in bank detail screen for germany

    Hi,
    We are using standard detail screen HRESS_CC_PER_DTL_BANK_DE for Germany, We have observed that even if the user changes/updates/creates the new record without filling Iban field system will not throw any error which is correct as per V_T588MFPROPC as we have not made it mandatory. but we have an option to populate Iban using specific button in PA30, can we have the same functionality in ESS? Can we implement HRPAD00INFTYDB for this purpose? Is there any other option for this functionality?
    Thank you,
    Krishna kishore T.

    I can solve this issue implementing the BAdI HRPAD00INFTYDB
    Summary of configuration options in ESS Personal Information scenario
    Regards

  • Decoupled Framework for Infotypes in SAP HCM

    Hi Experts,
    I am new to Decoupled Framework concept. Could you Please help me in gaining some knowledge on this concept and suggest me on below queries.
    1) my BADI implementations are in HRPAD00INFTY, some of the implementation which use class CL_IM_HRPADPL_LIMITS_GEN
    is giving ABAP dump.
    2) we have raised the issue to SAP they are saying that HRPAD00INFTY is invoked, and suggested some code lines in the class as temporary solution.
    and also for permanant solution suggested to use BADI HRPAD00INFTYDB (Decoupled frame work BADI)  instead of HRPAD00INFTY.
    so my question here is, there are so many differences in both the BADIs and we have around 50+ implementations to HRPAD00INFTY. Do we need to understand each implementation of HRPAD00INFTY and implement the same to HRPAD00INFTYDB or there is any automatic process?
    If we need to implement each and every thing, it is tedious job (understanding each and every implemention and add the same functionality to new BADI, Testing the functionality etc..  it will impact the busness also if any thing goes wrong).
    Thanks in Advance,
    Rahul

    As a starting point, read this blog. I would make sure all the enhancements you have in place can be implemented using the decoupled framework. As far as I remember, not all infotypes are covered by the decoupled framework.

  • Getting error Data record has grouping value "" in

    Trying to change Address data in HR using BAPI_ADDRESSEMPUS_CHANGE
    Getting error message : Data record has grouping value "" instead of ""
    Please advise.
    Thanks,
    Bhaskar

    Hi,
    I assume the following system situation exists:
    The new Infotypeframework NITF is inactive for PA30. Flag CCURE PC UI is activated in T77SO. You are using ESS based on Web Dynpro which uses the new Infotypeframework.
    Here we have to differentiate between infotypes which are participating in the data sharing functionality and all other infotypes. Such as:
    Infotypes without Data Sharing:
              - Infotype checks     => module pool
              - Infotype update     => SAPFP50P/SAPUP50R
    Infotypes with Data Sharing:
              - Infotype checks     => module pool
              - Infotype update     => NITF
    ATTENTION:
    BAdI HRPAD00INFTY is not processed in this case (importing parameter NEW_IMAGE is always space). Instead the BAdI HRPAD00INFTYDB of the NITF is been processed.
    The following notes (1 and 2) will solve the problem. Note 3) solves an involving problem caused during the deletion process of a personnel number.
    1) 783499 - Incorrect framework synchronization
    2) 845592 - Incorrect framework synchronization - Retroactive accounting
    3) 844998 - PU00: Termination when deleting a personnel number
    Hope this will help!
    Regards,
    Sibylle

  • Message Handling for Personal Information application on ESS Portal

    Dear Experts,
    JAVA webdynpro applications are attached on portal for Personal Information, Whenever employee changes his personal Information like personal details, address , Family details after pressing 'SAVE' button I want to display custom message.
    I have gone through this post Personal data changes in ESS portal 
    1) Class CL_HRESS_PER_DETAIL is not triggering.
    2) BADI  HRPAD00INFTYBL is triggering on 'REVIEW' button only & it is only showing error message , I want to show successful message.
    3) BADI  HRPAD00INFTYDB  is triggering on 'SAVE' button but method  IF_EX_HRPAD00INFTYDB~UPDATE_DB don't have any message handling parameter.
        I tried with class cl_hrpa_message_list  in UPDATE_DB  method   its not showing any message.
    Please Help.
    Thanks & Regards,
    Bhushan

    Hi Yugandhar,
    If possible I want to change message as shown in screen shot, If it is not possible to change it I have to show additional success message "The Changes you made were sent for HR approval".
    Thanks & Regards,
    Bhushan

  • BADI for changing fields during Creation of BP in CRM

    Hello to everyone,
      I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.

    Hi
    If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
    You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
    Cheers
    Dom

  • Implementing BADI MD_ADD_COL_EZPS for MD04 custom column

    Hi there,
    I'm using BADI MD_ADD_COL_EZPS to display 3 new buttons and three new columns in MD04.
    For each line item that is displayed, the custom column is filled, after the button is hit -This works fine.
    My Question is:
    Is there any way to limit the value that is filled into the new column so that it only appears on the FIRST line item/row?
    (At the moment it is repeated all the way down the page - the new value is a material characteristic, so doesn't change, will always be the same for each line)
    I've looked at all the available structures/tables in the FILL_ADD_COLUMNS method of the BADI, and none seem suitable
    to determine the "first" row. (ie. something like the way SY-TABIX or SY-INDEX might be used)
    Any help appreciated.
    Thanks,
    David.

    Hi Shubhendu,
    in the method 'ACTIVATE_ADD_COLUMNS', you can set the flag EZ1_MODE to '1' to make the first column visible always. (it's been a while, but I think setting it to '2' makes it visible when the button is pressed.)
    Same applies to EZ2_MODE for second column, EZ3_MODE for third.
    look at the flags/parameters in this method, and also in FILL_ADD_COLUMNS, to fill the data.
    here you need to fill structure EMDEZX_USEX1 (for column 1) etc.
    The code is hit for each record displayed in MD04
    Hopefully this helps you.
    Regards,
    David

  • Help Needed Badly | BlackBerry INC000025111306 | BlackBerry PlayBook - Tablet button does not work, almost stuck, copper under screen, seventh repair

    I was really Humilitated my RIM on this Ticket whcih i rasied.
    1) I bought a new tablet in last november in 2 months i had a Charger issue 
    2) They said this charger issue we cannot replace with new tablet and gave me a refurbished Tablet to me .
    3) Which also had same charging issue and they exchanged 2 more tablets and the last tablet which was given to me by RIM have a safety concern
     - 1 Small mesh of wire is poping out from the Tablet 
     - Power Button is very hard and its not that easy to press,
    So i raised the above ticket and was esclated internally with RMA as well and i got an update from the esclation agents that we will reply back in 2 Days i waited almost 3 weeks and called 2 times in this 3 weeks for an Update asking for a new tablet so that atleast once in all i can jeep a good 1 Tablet.
    But they never bothered to call me and today i called them again and RIM gave me a call back mentioning we cannot give a new tablet we can again check this tablet repair it and give it back , If we cannot repir then give a replacement new/Old tablet,
    I was wondering how can a tablet from RIM can go out without such safety concern ? How a mesh of wire can comeout of tablet so what safety norms RIM is follwoing for customer.
    AM i not humilitated? since after taking all these struggle tto get a good tablet i have been considered as bad.
    What RIM have to say for this, I am planing to take this to Legal department to follow how i can get a justice for this.

    I would have deleted this but can't find a delete?
    At any rate. got the Blackberry going again but it reset it and lost all the info, pictures and so forth.. oh well. at least it is still working.
    Thanks.

  • Error message in a BADI getting displayed in a popup instead of status bar

    Hello All,
    I have implemented a BADI in ECC6 to prevent the change of formula in ERP from transaction O3I8.
    The BADI gets called on clicking 'Save' from transaction o3I8.
    Within the  BADI i am giving an error message using the following command:
    Message e000(ZABC) .
    However , the message gets displayed in a pop up instead of the status bar .
    The same is for information and warning messages.
    Any suggestions on how to display them in the status bar ?
    TIA
    Regards,
    Vartika

    Hi Brad,
    The checkbox to display messages in pop-up  is already switched off.
    Still themessages are getting displayed in pop-up.
    Regards,
    Vartika

  • Error message from a BAD PDF

    I am using Adobe Reader to render PDF documents as a part of a process and then convert it into TIFF. Some of the documents that come in are corrupt PDF documents and cannot render itself in the reader and hence cannot be converted. This is the error that the reader throws:
    ADobe reader could not open "test.PDF" because it is either not a supported file type or because the file has been damaged(for example, it was sent as an email attachment and wasn't correctly decoded)
    Now, the process is automated with no human intervention. with the advent of this error message, since there is a modal dialog box waiting for a response from the user, the process is interrupted and needs human intervention.
    My question is simply this. Is there an API i could use where i can figure out beforehand if the PDF is bad so i can reject such files early on? research shows that using the adobe forms server which has the PDF utility services, there is a query "Is a PDF document" that is available. I do not want to use a server product.
    Is there any other ADOBE product that exposes something similar?

    I guess i forgot to add that piece of information. WE do not create the PDFs. We receive PDFs from external sources over which we have absolutely no control  and that explains why we get such corrupt documents in the first place. I was just wondering if there was a simple API event/method/means attached to any ADOBE product which is compatible with .net that tells me if the PDF is corrupt UPFRONT.

  • Error while transporting infospoke with BADI in BW7.0

    Hi:
    We have an infospoke with Transformation ( ie with BADI) in BI7.0.
    While transporting to Quality box it gives error.
    "Transfer structure /BIC/CZZTXXXXX3 could not be generated
    Error when activating InfoSpoke ZTXXXXX3.
    Message no. RSOH010 "
    Could you please help in rectifying the error.
    PS: we tried transporting BADI first and then the infosoke but still its failing.
    Regards!
    Saniya

    Hi
    Check the forum link below
    Transport Problems with Spokes that have BADIs
    Thanks

  • IPod can no longer sync or charge, bad pin connectors?

    I've got an iPod touch thats a year old now that suddenly no longer will charge/sync to anything. I'm thinking maybe the pins are bad?
    I've had difficulty inserting chargers into it since I got it, I've been careful to not handle it too roughly but it does take a strong push to get the charger in there. Of all the ipods I've had (and i had the first gen iPod touch before this too) over the years, never had that problem.
    Before I get a bunch of "just reset it" kinds of replies, it is functioning properly other then that. Last night I did have it hooked up and synced to my Mac so it fully charged, but just now I went to connect it and now it refuses to connect at all. I've tried 2 cords, and with the same cords I plugged my iPhone in as well and it all worked fine, so it's definitely not my other hardware. iPod software is also up to date as well.
    I haven't had a real issue of it not syncing with my computer before today, but in the past month it's had issues staying properly synced to my car radio (play it through USB). It would sometimes drop off or glitch up and not want to work correctly, though in the past week it started working more normally again.
    I listen to my ipod as much as humanly possibly, so I'm wondering if this something I can take to the Apple Store and see if its fixable or replaceable. I've been looking for a great excuse to get the new red ipod touch but I've been unemployed since August.. Of course it has to break before I get a new job
    Has anyone else had the issue of having difficulty getting the sync cords into their ipod touches/problems where the pins just die?
    EDIT: Nevermind. My imac suddenly wont sync my iphone either but I plugged the ipod into the iphone charger and it synced immediately. It's something on my computer's end.
    Message was edited by: Arei

    *all the songs are there, but there are shown in light grey and not able to be high lighted.*
    *I'm also not able to play from my ipod list, only from my itunes??*
    Grey text when you look at the content and a lock symbol at the bottom of the screen just indicates that the iPod is set to sync automatically with iTunes. If you want to play the iPod songs through iTunes, delete songs from the iPod, drag songs from iTunes, add playlists to the iPod etc. you need to change the update setting to "manually manage songs and videos" as per the link above. The text will change from grey to black and everything will be directly accessible through iTunes
    *I have seen a friend plug his ipod into some one elses computer and the same thing happened, it showed all the content but he was not able to access it, or modify it.*
    Again that's most likely because the iPod was set to auto-sync with his home library. If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
    Using iPod with Multiple computers
    *Before I backed up my itunes libary from my external hard drive, and itunes was empty, it would not allow itunes to be copyied from my ipod?*
    iTunes will only give you the option to copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (music from CDs, other downloads etc) there are third party utilities that you can use to retrieve the music files and playlists from your iPod.

Maybe you are looking for