Badi implementation error after implementing oss note 745168

Hi All,
i implemented oss note 745168 to fix badi ME_PROCESS_REQ_CUST by doing step 1 & 2 manually..
during the implementation of step 3, there was error but we just proceeded..now my whole badi consists error and can't be activated but the definition works just fine..
can anybody pls help

Hello Babita,
For which version are u applying this note?? Is it for 4.7??
I checked the note and for r/3 release 4.7 there are two correction instructions.
Implement them in the following order
1. Correction instruction 434275
2. Correction instruction 434276
Please make sure you have implemented both corrections.
In code comparison editor you can check the code difference by clicking the "next code difference" tab in toolbar. It will tell you which code changes are missing.(You can see the required code changes just by clicking the correction instructions 434275 and 434276).
Hope this will helpful.
Regards,
Bhavana

Similar Messages

Bad Character Errors after Unicode implementation???

Hi,
Uncode is implemented in BW Development system in my project. While prforming unit testing after implementing the unicode, we faced an issue of bad character in Sort field while loading data for 0VENDOR master data. Till now we used to correct this kind of error in PSA level and reload the data from PSA to Data target in production. I hope, this kind of error should be resolved after implementation of Unicode Conversion project. But, even after implementation of Unicode, we faced this problem.
Can you please confirm me my understanding is correct - after implementation of Unicode, bad character errors will disappear?
Best Regards,
Venkata.

HI again,
I would like to correct my statement above. I did encounter an error during the import phase (ie. import abap) where it stopped at SAPDFACT.
I changed the "err" to "ok" in the tsk file to continue cuz I couldnt find any other alternative working. On browsing other forums I have come to conclude that is the problem for sure.
Can you please help me figure how to resolve the issue please .. ??
thank you!

MATP- error after implementing note

Dear All,
We are working on MATP scenario. After configuring all the necessary settings we run availability check in simulation.
Initially when we ran availability check for small quantity, it was confirming in APO ( In ATP simulation). But while providing larger quantity, it was showing an ABAP error.
At the same time in R3, system gave an error saying u201Cerror in calling up function u201CBAPI_APOATP_CHECKu201D in APO server XYZ a calculation field is defined too smallu201D while checking availability for larger quantity.
To overcome this situation, we had implemented a note u201C1005131u201D. Now the dump in APO and error message in R3 is not coming, but it not confirming orders.
(When we check materials availability in R3, missing part button does not appear but at the same time system does not confirm any quantity)
Have anyone of you have faced similar situation? Please reply if anyone has any clue regarding this issue.
We are using SCM 7.0
Regards,
Nitesh

Hi Nitesh,
Are you using phantom assemblies ?
There can be a error during PDS explosion that causes the error. We faced the same error and implemented note 1147324.
Please implement note 1147324
Thanks,
Pavan Verma
Edited by: Pavan Verma on Jan 21, 2010 11:38 PM

Error after implementing SP11 Patch 5 for 7.5 MS

After implementing SP11 Patch 5 for BPC 7.5 the SPRunConversion function (which worked find under SP07) no longer works. Every time that the function runs an error FX-160 is generated indicating that there is No Entity selected.
I have modified all of the applications, optimized all of the applications, and reprocessed all of the rate related dimension files.
Has anyone else run into this issue with the stored procedure after upgrading to patch 5 on SP11?

Hey Experts,
other templates working fine (personell admin. personell time, organizational management, travelmngt.)!
The templates running in the 3.5 BW....but since the update of our testsystem the e-recruiting templates give back these errors.
We dont wanna initialize the migration of templates and other objects to 7.0 now. Maybe in a few months.
Could it be that several (in my case the e-Recruiting Templates/Queries) 3.5 objects never be running without migration?
Thx for your answers!!!
kind regards,
moriz

Formatting error when displaying OSS note w/PDF

While searching & displaying OSS notes, I click the PDF button to print or download the note. I then get a message "An error occurred when formatting the SAP note.". Has anyone seen this and have suggestions for correcting it? My colleague is able to bring the note up in PDF format just fine, so it's something unique to my PC or Adobe reader.

I've seen this last week too - no matter what PC I was using.
If it doesn't work after a while I'd open an OSS call
Markus

Repeated "Bad Request" errors after clearing cache, cookies, and cookies.sqlite

I get repeated "Bad Request" errors when submitting forms, logging in/out of sites, etc. I get this on a wide variety of sites. I have tried repeatedly clearing all cache and cookies. And I just tried disabling all my add-ons (only have 4) and then deleting the cookies.sqlite file and this still made no difference.
I am using Mac OS 10.5.8 and Firefox 5.0.1 but I have been experiencing this problem in past versions as well, maybe as far back as the latest firefox 3. My main motivation for upgrading Firefox multiple times was hoping this problem was corrected. It never used to happen, it just started happening all of a sudden. It has never occurred on Safari and I am still able to get any site that doesn't work properly to work on Safari without any problem.
I experience this on many sites. One reliable cause of it is logging out of Facebook.

You did delete all cookies.* files ?
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Cookies#Removing_cookies
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Page display:400 Bad HTTP request after implement WebDispatcher fo portal

Dear all
Our portal implement the WebDispatcher(7.0) to load balance for our
portal system(include one CI and one Dialog instance,we use HTTP to
load our portal request.).After that,some of the portal page display
the information like this:
400 Bad HTTP request
Bad HTTP request
Error: -21
Version: 7000
Component: HTTP_FILTER
Date/Time: Thu Sep 27 10:26:51 2007
Module: http_auth.c
Line: 469
Server: portal_WDP_02
Error Tag:
Detail: illegal request
© 2001-2005, SAP AG
We logon the CI and the page all are right.So,some wrong with our
WebDispatcher?Can you give us some advice?

Hi,
The answer from SAP:
The maximum size of request URI is hard coded in kernel, and it cannot be configured by a parameter. The maximum size of PATH is 4096, and the maximum size of query string is 4096 as well.
If the request is a post request, you have to ask the calling side to move some name value pairs from query string to the POST body.
If it is a GET request, you have to ask the calling side to change it to POST and move value pairs to the POST body.
Kind Regards

400 bad request error after Firefox 4.0.1 update

After the latest Firefox update, the browser no longer works. When I try to go to a web site, Firefox sends the URL incorrectly by repeating the url. For example: if I type the url http://my.yahoo.com/, I get the following error:
400 Bad Request
Your browser sent a request that this server could not understand:
my.yahoo.comhttp://my.yahoo.com/ (port 80)

Thank you again for your help. After clearing the cache and cookies, and still having the problem, I uninstalled/reinstalled firefox. I had tried this before, but allowed it to keep my bookmarks, etc.. This time I had it remove everything (this is a check-box when doing the uninstall).
After reinstalling Firefox this time, the problem went away. Thank you for your help. Your comment about the cache and cookies, made me think that removing all information during the uninstall would help, and it did.
I don't know if your second suggestion would have helped, because it is now fixed.
But I believe it was a possibility.

See my code that no me error after complied but not give me pdf result and

hi master
sir i use this code for create the pdf
ExternalContext econtext = getExternalContext();
InputStream stream = econtext.getResourceAsStream(PREFIX);
try {
JRResultSetDataSource mcon = new JRResultSetDataSource(getSessionBean1().getChartofaccRowSet());
JasperPrint jasperPrint = null;
jasperPrint = JasperFillManager.fillReport(stream, null, mcon);
JRExporter exporter = null;
HttpServletResponse response = (HttpServletResponse)econtext.getResponse();
FacesContext fcontext = FacesContext.getCurrentInstance();
exporter = new JRPdfExporter();
exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_STREAM,
response.getOutputStream());
exporter.exportReport();
fcontext.responseComplete();
} catch (Exception ex) {
log(" Error Description" , ex);
error("Error counting rows: " + ex.getMessage() );
error("Error counting rows: " + ex ); }
sir this code not give any error but also not create /display the pdf
i try to find the where problem occurred i get textfiled and send some value after one by one line
like is this
first time try
JRResultSetDataSource mcon = new JRResultSetDataSource(getSessionBean1().getChartofaccRowSet());
textField2.setValue(PREFIX);
is given me right result and show /WEB-INF/reports/mfa.jasper in textfield2
second time
jasperPrint = JasperFillManager.fillReport(stream, null, mcon);
textField2.setValue(PREFIX);
when i press button second time this time page not give me result in textfield2 and show blank it means
only this line have error but what i could not foud out jasperPrint = JasperFillManager.fillReport(stream, null, mcon);
use see my code and give me idea or solution of my problem
thank�s
aamir

I found and easier way to do it and wrote it up here: http://developers.sun.com/jscreator/learning/tutorials/2/reports.html

Bad Disc error after burning

Hi guys, Ive just finished making a dvd in Final Cut express and have exported all the files ready for Burning onto a dvd.
I thought i had done it correctly but after a few attempts every disc comes up 'Bad Disc' when i try to play it through a dvd player. But will play when i put it im my Mac with no probs at all.
This has been filmed with PAL sony cam (as i live in Australia) and i think i have all the settings set up for PAL in the DVD studio pro. Can anyone explain or think why this is happening?
Thanks
Nathan

Did you make an HD DVD? (Take a look at what folders are being created in you build destination, if you see something other than VIDEO_TS and AUDIO_TS, you probably made an HD DVD. Open the DVD in Finder and see if HVDVD_TS is on the disc.)
You cannot change a HD project to SD once it is HD so it needs to be recreated. In preferences you can set the default to SD.
Also, did you set a first play on the DVD?

Itune errors after update will not reinstall

it keeps saying "failed to start because MSVCR80.dll was not found reinstalling may fix" ... I tired and it says same thing what now ..i have 30 gig of music backed up to a seagate portible hard drive,,,,, do i just scrap this laptop

Hello bigjohnjed,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described. The following article has steps to do this (it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
I recommend continuing with this article if you continue to experience issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

IDoc Adapter error / oss note 856266

Hi all,
Has anyone else run into and successfully fixed the error described in oss note 856266? We ran into exactly this issue. Found the note by searching on the error message, downloaded and applied the correction instructions, all the while feeling pleased it was such an easy fix...
Nothing changed whatever though after the correction instructions were implemented. So either we did something dumb or the fix is not working for our system. Just wondered if anyone had similar experiences?
We are on Win2k/SQLServer/SP13
Cheers,
Chris

One LAST suggestion. Looking at Note 837595, it doesn't seem to specify a value for authorization group (DICBERCLS). Try authorization group 'SS' (without quotes). So:
Object: S_TABU_DIS
Activity: 03
Auth. Group: SS
I recall now that a customer recently had this issue and (for them), this helped.
Jin

Applying OSS note with attachments

Hi All,
I am trying to implement one sap note. This note contain two attached files. Bot are having the file extension .SAR. How to implement such kind of OSS note.
Please reply.
Thank you

Hi JJ,
In some cases , when objects are not present in Customer systems then SAP will provide objects in difff ways
1.Providing source code with in note as a attechments
2.Providing External trannsport Request, this request as same as ur normal transport requet which consists of CO and Data files.So we have to add these files to out TP buffer , after that we can import all these into ur DEV server and so on.
so ask ur basis person, i think we can give so good idea how this will works.
Regards
Prabhu

"Bad request" errors in Firefox with second user account

Yesterday, I set up a second user account for my husband to use. Everything seems to work fine with one annoying exception. When Firefox 3 is used as the browser under the new user account, I get frequent "Bad Request" errors with various web mail programs (MobileMe, GMail, Earthlink's web mail).
This does not happen when the same Firefox 3 is used under my original user account. It also does not happen when performing the same functions with Safari under the new user account. It also doesn't seem to matter whether Fast User Switching is enabled or disabled.
I have tried clearing caches, deleting cookies, deleting preferences etc. in the second user's Firefox, all to no avail. Anyone have any other ideas?
I guess one thing I'm a little unclear about... is the second user actually using the same Firefox app as the first user? If so, would there be a way to install a 2nd Firefox app that would only be for the second user? I'm just thinking maybe there is some kind of conflict going on?
Any thoughts or help out there much appreciated!

I think I figured it out. I found an article online that said if you have Parental Controls enabled on an account (which I did on the second user account), it will not allow Firefox to write cookies, thus causing the "bad request" errors.
This is not exactly true, as Firefox under the new user DID seem to be writing cookies just fine. However, when I disabled Parental Controls on the account, suddenly the errors went away. So, it doesn't have to do with cookies, but there is something about having Parental Controls turned on that can cause these errors.

After implementing Note 992032 getting errors in Bex workbook

Hi All,
After Implementing the note 992032 (You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about using transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes) getting error messages in BEx workbook when try to filter on any InfoObject but when I run query I'm getting data but not able to filter, we are using BI 7 on patch 11. When implementing the note number 964580 it's giving error and this particular note number is not yet implemented.
Getting error messages like:
1. Error reading the data of InfoProvider 0FIAR_O03
2. An error occurred in the program:
3. ORA-20000: Insufficient privileges ORA-06512: at "SYS.DBMS_STATS", line 2150 ORA-06512: at "SYS.DBMS_STATS", line 14112 ORA-06512: at line 1
4. System error in program CL_RSR_WWW_RENDERER and form GET_FILTER_VALUES_CHA:03 (see long text)
Before implementing 992032 everything worked well.
Could anyone please help!
King Regards
Suman

We are getting similar errors after applying BW SP11 yesterday on our dev BW system. I've opened a message with SAP support . If anyone gets a solution for this please post it.
Regards,
Ron.

Badi implementation error after implementing oss note 745168

Similar Messages

Maybe you are looking for