BADi in QA32 and COR3
Dear All
I am searching for badi in QA32 and COR2 .IF any one have done this please do let me know.
As well i serached for badi
These are the BADI's:Check once.
QPL1_SUBSCREEN_ADDON
INSPECTIONLOT_UPDATE
Check these Exits:
QEVA0004 Exit for changing information line in usage decision he
QEVA0005 User subscreen for displaying add. data for usage decis
QEVA0006 Entry to usage decision transactions
QEVA0007 UD: Control of compulsory comment or long text presetti
QEVA0008 Usage decision: Customer function key (e.g. to cancel U
QEVA0009 UD: Predefinition of quantity to be posted to sample st
QEVA0010 UD: Usage decision check
QLCO0001 QM: Call alternative costs report from UD
QSS10001 Possibility of calling a different print report
but then too my req was not done
i want to add fields in qa32 which are there in MIGO (in migo down in general i want to get Delivary Note, Doc Header text,
DOWN in where tab i want to get goods recpipent,unloading point)
Thanks in advance
Sravya
no answer from long time
Similar Messages
-
i purchased bad boys 1 and 2 from the i tunes store but they would not play so i restarted my laptop and now they are not even on my itunes
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete the songs and redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
User exit / BADI for training and event management
Hi all,
Can anybody tell me if there is any user exit / BADI for training and event management module?
Thanks & regards,
LOIHi
BADI's for Training and Event Management
HRTEM00MASTERDATA HR: Training and Event Management - Master Data
HRTEM00NET_ACTIVITY Determine Activities of an Attendee (e.g. ESS PV8I)
HRTEM00NET_WEBST Set Cancellation Reason in ESS PV8I
HRTEM_CORR_NOTIF_REQ Customer Enhancement:Confirmation on Send (R/3 Mail, E-Mail)
HRTEM_HANDLE_BOOKING HR-TEM BAdI: Employee Leaves Company - Update TEM Data
HRTEM_INT_ZW HR-TEM: Badi for Integration TEM - Time Management
HRTEM_READ_OBJECT Customer Enhancement: Name Format
RHPV0001 Customer Enhancement for Additional Checks for Booking
Enhancemnet Spot:
HRTEM00MASTERDATA HR: Training and Event Management - Master Data
~~~Ganesh Kumar K. -
Bad PBR sig and dual booting with Windows
This site's menu config is too difficult for me...
fyi.
=>
Below is the cases that happened in my environment
when installing Solaris 8 Operating Environment, Intel Platform Edition
Some will help you, and some may be just for your thinking.
Bad PBR sig
You know what it means?
I don't know.
If you know, let me know please...
@ Case 1
My Seagate ST39236LW 9.2GB HARD DISK fdisk info
Total disk size is 14342 cylinders
Cylinder size is 1251 (512 byte) blocks
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS:NTFS 0 7165 7166 50
2 Active x86 boot 7166 7182 17 0
3 Solaris 7183 14341 7159 50
(I use cylinder number to partition hard disk. Why?
When I use % and insert 1% to partition 2 then
fdisk makes start cylinder 7155.
It overlays with partition 1's end cylinder number.
So fdisk save(menu no 4) fails...
because the partition 1's start cylinder number is 0 ?)
After rebooting, bizarre Bad PBR sig, and my system dies...
So I boots my PC with Windows(or Dos) booting diskette.
A> fdisk
First Hard Disk partition info
1 NTFS 4377 50%
2 NON-DOS 10 0%
3 A NON-DOS 10 0% <= Solaris created x86 boot
4 NON-DOS 4363 0%
Solaris created extra X86 boot partition 3 and made it active.
But partition 3 could not boot...
I made partition 2 active from dos fdisk menu,
and pc boots well.
After rebooting, my disk partition info is like this
Total disk size is 14342 cylinders
Cylinder size is 1251 (512 byte) blocks
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS:NTFS 0 7165 7166 50
2 Active x86 boot 7166 7182 17 0
3 x86 boot 7183 7199 17 0
4 Solaris 7200 14341 7142 50
Then after installation?
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS:NTFS 0 7165 7166 50
2 Active x86 boot 7165 7181 17 0
3 Solaris 7200 14341 7142 50
Partition 2 and 3 changed...
Where did partition 3 go???
Just deleted?
Then why partition 2 Start cylinder changed?
@ Case 2.
Another queer thing....
Total disk size is 14342 cylinders
Cylinder size is 1251 (512 byte) blocks
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 IFS:NTFS 0 7165 7166 50
2 Active Solaris 7166 14341 7176 50
In Solaris x86 format fdisk menu,
if I've allocated remaining disk space all to Solaris(without x86 boot),
then Solaris also makes x86 boot partition(size 10MB), reboots well.
But install fails due to not enough free disk space
when install begins slicing Solaris partition.
error log says
Installing 32 Bit Solaris Packages
- Configuring boot device
- Using disk(c0t0d0) for "rootdisk"
- Deleting x86 boot fdisk partition (c0t0d0)
- Creating x86 boot fdisk partition (c0t0d0)
ERROR:Not enough free space to create x86 Boot fdisk partition(c0t0d0)
Why does Solaris delete and create x86 boot partition?
Why did it exist?
Case 3.
If I've fdisked like this, what will happen???
Total disk size is 14342 cylinders
Cylinder size is 1251 (512 byte) blocks
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1BAD PBR SIG message comes from your BIOS - no partition boot record.
Sorry but it's not clear what else is going on - might be worth running a ODS based fdisk to clear the disk before installing Solaris? -
RESTORE - Kernel Bad page - header and trailer not matching
Hello,
I have a Problem with the recover of my backup.
When i want to make a restore of the Database this error is shown in Logfile KNLDIAGERR
2008-11-26 21:20:38 --- Starting GMT 2008-11-26 20:20:38 7.5.0 Build 032-123-111-699
2008-11-26 21:26:57 0xE0C ERR 20005 Kernel Bad page - header and trailer not matching
2008-11-26 21:26:57 0xE0C ERR 20006 Kernel Header [ 5277032 - data - tab - checksumData - empty ]
2008-11-26 21:26:57 0xE0C ERR 20007 Kernel Trailer[ 0 - data - nil - chckNil - empty ]
2008-11-26 21:26:57 0xE0C ERR 52015 RESTORE write/check count mismatch 5277032
2008-11-26 21:26:57 0xDFC ERR 52012 RESTORE error occured, basis_err 300
2008-11-26 21:26:57 0xDFC ERR 51080 SYSERROR -9026 BD Bad datapage
any Help ?
thanks a lot
StevenHi Steven,
the database kernel checks with every read the header trailer. If it got a mismatch during read the error message you got is logged.
The same checkes will be executed when you create a backup. You told us that the backup could be executed without any errors and that the system where you created the backup is ok as well -> you executed a Check data?
Now everything looks like the error is in the backup and happened during writies to the external backup medium. Or the backup is ok and then the error happens during read from the external medium.
To get closer to the reason where the problem is located I need to have some more information.
1. You did the restore several times?
2. Did the bad Data Page shappens always on the same page -> Check knldiag.err
3. Did you do your backup on tape?
4. Did you try to create a backup into a file?
5. Does the restore from file got the error as well?
Regards, Christiane Hienger -
I wonder if it is possible to hack the iphone? because a friend received a bad message me and i never send the messenger. is someone please help me
It wasn't your iPhone that was hacked, but your email account (or
messaging account) that was hacked. Immediately change all your
passwords for such accounts. -
Hi All
I am learning XI and the difference between " ALE, IDOC, RFC, BAPI, BADI "
Not clear and when to use what and how in point of XI ?
Pl..clarify me
Adv..thanks and points
--- Rakesh BeheraHi
This will expalin you every thing ...pl..go through
The interface concept of the classic R/3 is based on two different strategies: Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
I hope this will help you to understand the difference bet..those
regards
--- prasad -
Bad pop ups and this thing called macsweeper. what us it and how do I get rid of it
I gave bad pop ups and this thing called macsweeper. What is it and how do I get rid of it. Thanks
There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
and I need to work on music not only in time but the battery after that.
I ask for help pleaseThanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
was doing the latest os update on my iphone 4 the update was interuptedby a bad internet connection and now the screen is stuck on an image of the itunes logo with a pic of the usb cord and an arrow in between HELP!!!n
or you can try this
http://www.iclarified.com/entry/index.php?enid=1034 -
Hi Guys, my iphone 4 showing bad retina display and showing horizontal lines? What could be the problem???
Could be that your screen is damaged or dying. Only way to know is to bring the phone to Apple for evaluation.
-
BADI For XK01 and MK01('bout STCD1)
Hi, i need a badi for this transactions XK01 and MK01, what i need to do is to validate that the input for STCD1 exists into LFA1-STCD1
Tks
ttorresGood day,
I want to add customer define screen or subscreen in subscreen area for xko1 tcode, there is Badi avialable vendor_add_data and vendor_add_data_cs but
how adjuctly i have to attach screen using this.
if u can help me.
regards. -
Demo programs of new and classic BADIs - transactions SE18 and SE19
Does SAP supply any demo examples of the new BADI switch framework and/or classic BADIs.
I've been trying to learn how to use SE18 and SE19 from examples on the web and articles in Thomas Weiss blogs. But, I'm still confused.
Thanks
Ed BakerThank you for replying.
I did look at that example during my investigations. In fact, I found another page with screen shots for the example at http://www.sapmaterial.com/badi.html
Unfortunately, I'm on ECC 6.0 and the screen shots don't quite line up.
What I'm actually referring to is spots like this in SAP supplied code. Here's a typical example in SAPMV45A during transaction VA01 (sales order create).
How do I get SAP to branch off to user code when it reaches the "ENHANCEMENT-POINT" line.
* MODULE XVBAP_LESEN *
* Tabelle XVBAP fuer Bildschirmanzeige lesen, es wird die erste *
* Einteilung mit Wunschmenge zur Verfügung gestellt *
MODULE XVBAP_LESEN OUTPUT.
PERFORM XVBAP_LESEN(SAPFV45P) USING CHAR1.
ENHANCEMENT-POINT XVBAP_LESEN_01 SPOTS ES_SAPMV45A.
*$*$-Start: XVBAP_LESEN_01----------------------------------------------------------------------$*$*
ENHANCEMENT 59 /SAPHT/SW_LIC_BU_VERS_SAPMV45A. "active version
* IS-HT (D45)(D44)
CALL FUNCTION '/SAPHT/SW_BUMP_ICON_OUTPUT'
EXPORTING
i_vbap_posnr = vbap-posnr
i_vbap_uepos = vbap-uepos
i_vbup_bump = xvbup-bump
CHANGING
c_gg_process_icon = gg_process_icon.
ENDENHANCEMENT.
*$*$-End: XVBAP_LESEN_01----------------------------------------------------------------------$*$*
ENDMODULE. -
"Disable Bad Name Cache" and "Disable Bad Address Cache"
hi,
on some issues it helped to deactivate "Disable Bad Name Cache" and "Disable Bad Address Cache".
Where/ how can we set these options for zcm 10.3 agents?
thx,
hugoThose are Novell Client settings not ZCM Client settings.
On 4/4/2012 1:16 PM, susehoush wrote:
> "Disable Bad Name Cache" and
> "Disable Bad Address Cache".
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Claims Error " Please Impliment BADI for Approver and Approver Group"
Hi all,
We have configured all the Eligibility criteria for an employee to create an
Advance and claim request through ESS.
while raising a claim or Advance request it is
showing the message request validation sucess full
but when we are sending the request it is throwing the error.
" Please Impliment BADI for Approver and Approver Group"
we have configured the
1. Privileges Group
2.Approver Group
3.Map Privileges Groups to Approver Groups
still Issue is there?
Warm Regards
Hari Sankar MHi All,
We have Implemented Badi to determine Approver and Approver Group.
while executing the Application its throwing a new error
"Incorrect Status Movement(New:New to In-Process:Approved) for Claim"
We have put a break point inside the Badi but it is not getting called?
Regards
Hari Sankar M
Maybe you are looking for
-
When will Mozilla correct the printing bug with Firefox where only 1 page is printed?
There is a problem with FireFox whereby it only prints the FIRST PAGE of many sites. Searching the web on this, it seems that this problem has been around for a long time and even what the cause is. Apparently FireFox interprets the html text "overfl
-
My Client wants to restrict appearing used PO Line items in MIRO
Hi Gurus My client wants to restrict appearing blank line items agaisnt already used Purchase Order Items (Full Qty GR / IR happened, GR Based IV) in MIRO so that user can not book another invoice against the same PO with diffrent ref. no. and in dat
-
RH Window not updating / topics not displaying after repositioning
Hi, I'm running RH8.0.2 on a 32-bit version of Windows 7. In the last few days I've had peculiar problems with the RH Window itself (not compiled help) not refreshing properly. For example, I want to compare a Word document to a help topic, so I resi
-
we have an one zreport for AUC report where we would like to introduce Internal Order Group on the report selection screen. We are unable to trace this field to a table. please help me for the same Regards RRR
-
Having a view of the bitrate of ALL tunes on mi
Is there anyway to use the software that came with the micro, or WMP, or Musicmatch, or Napster - whatever. to see the bitrate as a column in all of the songs on my micro? I haven't found this anywhere - I can get columns on just about anything but b