Badi ME_PROCESS_PO_CUST-PROCESS_ITEM

Hi,
I have using the badi ME_PROCESS_PO_CUST-PROCESS_ITEM and the works fine.
But i need to write in a item field that the status is "display", in that status the badi does not write in the field.
To write i have to change the status to "optional entry" in spro, but the ideia is the field is the field stay non-edit.
Can someone help with that question?

Can everyone help me?

Similar Messages

BADI ME_PROCESS_PO_CUST Method:PROCESS_ITEM

Hi,
I have to update the vendor material field through BADI ME_PROCESS_PO_CUST.
I have created an implementation for this BADI.Can anyone help me find the solution for the same.
Thanks.

DATA: wa_ekko TYPE ekko,
        wa_ekkn TYPE ekkn,
        wa_ekpo TYPE ekpo,
        wa_vbap           TYPE vbap.
DATA : lt_item TYPE mepoitem.
IF im_item->is_persistent( ) EQ mmpur_no. "Only check for new items
* Retrieve item data into BADI buffer
*get data
    CALL METHOD im_item->get_data
      RECEIVING
        re_data = lt_item.
    ENDIF.
    SELECT SINGLE * FROM ekko
      INTO wa_ekko
      WHERE reswk NE ''.
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM ekkn
          INTO wa_ekkn
          WHERE ebeln = wa_ekko-ebeln.
      IF wa_ekkn-vbeln <> ''.
        SELECT SINGLE * FROM ekpo
          INTO wa_ekpo
          WHERE ebeln = wa_ekko-ebeln
          AND   idnlf = ''.
        IF sy-subrc EQ 0.
        SELECT SINGLE * FROM vbap
          INTO wa_vbap
          WHERE vbeln = wa_ekkn-vbeln
          AND   posnr = wa_ekkn-ebelp.
        IF sy-subrc EQ 0.
          lt_item-idnlf = wa_vbap-kdmat.
        ENDIF.
      ENDIF.
    ENDIF.
        ENDIF.
* Update changes
    CALL METHOD im_item->set_data
      EXPORTING
        im_data = lt_item.

ME_PROCESS_PO_CUST~PROCESS_ITEM Shipping data doesn't get populated

Hi Gurus,
I need your help to solve one issue while populating shipment data via 'BAPI_PO_CREATE1' to create a PO I am populating poshipping[] and poshippingx[] with Route field and and also 'X' but the value I am passing it is overwritten by other value.
Then I have implement ME_PROCESS_PO_CUST BADI method PROCESS_ITEM where I was trying to pass the value what I have pass through my custom program but when PO is created shiping tab is missing.
Attaching my code written in BADI method:
ASSIGN (lc_ship_table) TO <lfs_ship_tab>.
    IF <lfs_ship_tab> IS ASSIGNED.
Retrieve Item level details
      lw_ship = ir_purchase_order_item_mm->get_shipping_data( ).
Read item
      READ TABLE <lfs_ship_tab> ASSIGNING <lfs_ship_line>
      WITH KEY po_item = lw_ship-ebelp.
      IF sy-subrc EQ 0.
        lw_ship-route = <lfs_ship_line>-route.
        CALL METHOD ir_purchase_order_item_mm->set_shipping_data
          EXPORTING
            IM_EKPV = lw_ship.
Any suggesions and how to acheive this.
Dip

Hello All,
I am also facing the same problem.
Can anyone help me to make the standard fields non editable ?
Either user exit or badi.
Thanks in advance..
Regards
Prapul Kumar

BADI ME_PROCESS_PO_CUST - DOES NOT CLEAR OUT ERROR

In ME21N I want to validate the field Commodity Code - STAWN. I have used the BADI ME_PROCESS_PO_CUST*
. Have used get_foreign_trade() in the PROCESS_ITEM method . I am able to throw an error . It is doing it but*
after throwing error then when we give a valid Commoditycode too it is still showing the error and not clearing the error .*
As suggested by Dean Q I used INCLUDE mm_messages_mac,
tried im_item->set_foreign_trade( ls_mepo_eipo) still when a valid Commodity code is entered after an invalid one it does not clear out the error. In fact on checking using break-point I found that the second time it does not enter into the method PROCESS_ITEM. Any help is welcome
Nivedita

Hi,
In SE18 give ME_PROCESS_PO_CUST as the enhancement spot and display. At the left side of the screen you can see the badi definition ME_PROCESS_PO_CUST. Expand the tree and double click on implementations. You can see the enhance implementations created. Double click on the enhancement implementation and in that screen there is a check box 'Implementation is active' and field 'Effect in current client'.
If you know the enhancement implementation name(not the badi implementation name), you can check it directly from se19.
Regards,
Poornima

How to issue warning message in BADI ME_PROCESS_PO_CUST

Hi Guys,
I have already checked the forum regarding this. There are lots of threads. Unfortunately none of them helped me. I must be missing some thing in my code.
I tried issuing warning message in BADI ME_PROCESS_PO_CUST and method PROCESS_ITEM.
First i tried with normal message statement
MESSAGE w001(00) WITH text-001 text-002.
Didn't worked.
Next tried calling standard macros
DATA:mmmfd_cust_01 TYPE mmpur_metafield VALUE 90000000.
call method cl_contextfield_mm=>set_current_field
exporting im_field = mmmfd_cust_01.
mmpur_metafield mmmfd_cust_01.
mmpur_message_config 'W' 'X' ' '. "Tried all permutations here
mmpur_message_forced 'W' '00' '001' text-001 text-002 '' ''.
Still no solution
Tried with macro mmpur_message also
Can some one helpme out to solve this issue.
Thanks,
Vinod.

Hi all,
Thanks for the responce.
Not sure whether you have looked into BADI documentation or not. Please check below.
"Further notes
The above-mentioned macros are defined in the program MM_MESSAGES_MAC. Please include this program in your own application.
Never issue messages in BAdI ME_GUI_PO_CUST! This is the task of the business logic and must therefore be done via the BAdI ME_PROCESS_PO_CUST.
"Never use the ABAP statement MESSAGE in the BAdI ME_PROCESS_PO_CUST. Please use the macro mmpur_message_forced only. This macro only writes a message in the message collector.
If you wish to mark the business object as invalid in order to prevent posting, you must additionally use the INVALIDATE ( ) method of the relevant interface. In this connection, see also the code example in the PROCESS_ITEM method of the BAdI ME_PROCESS_PO_CUST.
I have tried almost all macros including mmpur_message_forced 'E' 'ME' '083' l_text ' ' ' ' ' '.
Not sure where i am missing:(
If i give error using MESSAGE statement it is working perfectly i.e. give error and save the PO. Only wanted to know if there are any implications.
Thanks,
Vinod

Badi-- ME_PROCESS_PO_CUST, PROCESS_ACCOUNT method

Hi,
My requirement is that While Creating PO,if the first four characters of Cost Center and FundsCenter is not equal to Plant then an error message should be raised . For this i used
Badi>ME_PROCESS_PO_CUST and Method->PROCESS_ACCOUNT .
The problem is that in PROCESS_ACCOUNT method the parameter IM_ACCOUNT doesn't contain Plant value.
If I am using PROCESS_ITEM method,in this IM_ITEM is not capturing Fundscenter value.
Please help in solving the issue. Is there any User Exit or Badi which gives me Plant,CostCenter,FundsCenter Values.?
Thanks
K Srinivas

Hi,
You can use same Badi for getting Plant,CostCenter,FundsCenter. what are all values you are not getting for that you use field-symbols. like here for getting Plant value Try these steps.
1. Press F1 on PO Screen Plant value. Get Program name, screen field structure from that.
2. declare one variable as field as field-symbols, in badi.
FIELD-SYMBOLS: <lv_var> type any.
Assign '((SAPLMEGUI)MEPO1211-NAME1) to <lv_var>.
Here SAPLMEGUI is Program Name And MEPO1211-NAME1 is field structure of your program screen.
in <lv_var> you will get the value of plant.
Same process you can try for other fields also.
Regards
Vishnu Gupta

BADI ME_PROCESS_PO_CUST is not triggering while creating/changing PO

Hi,
I am new to BADIs,
I am trying to implement BADI ME_PROCESS_PO_CUST in ECC 6.0. I have done the implementation and activated. I kept a break point in PROCESS_ITEM method, but the BADI is not triggering while creating or changing the PO. Please advice me what could be the reason behind this?
I used the SQL trace but i couldn't get the BADI ME_PROCESS_PO_CUST in the list.
thanks in advance
Regards
Jagadish

hello jagdish,
implement this user exit.....
MM06E005...
go to EXIT_SAPMM06E_017 in that then you can put a break point in the user defined function module.....
or use
BREAK 'C5133392' (use your user in place of C5133392)....it will stop here while creating PO or changing PO...
now you can do whatever you want to do in create or change PO using this function exit......
perform the validations on import parameters.....to create or change ....and activate the project....
hope this will give you some idea and help

Implementing Badi ME_PROCESS_PO_CUST

Hi all,
I'm trying to implement the BADI ME_PROCESS_PO_CUST, the method PROCESS_ITEM, and I'm trying to change the field ls_positem-lebre, but it doesn't works. I've seen that this field is in the mepoitem_tech structure in the method set_data and it restores this value to his old value, anyone knows how to change this field?
..and another question...
In the same BADI, I'm trying to change the sale's area in the shipping data, but when I call the method set_shipping_data there is a firewall that only allows me to change the fields vstel, lprio, vsbed, route and ablad. Is there any way to change the other fields?
Thanks,
Xavi

Hi,
By implementing the above badi you can change limited fields at item level.
I am using this to change the following and it is working fine for me.
a) Chaning field -- PLIFZ and RESWK and NETPR based on some header conditions
DATA : LS_MEPOITEM TYPE MEPOITEM.
DATA : ZZPLIFZ TYPE EKPO-PLIFZ.
Get the Item data
    LS_MEPOITEM = IM_ITEM->GET_DATA( ).
     LS_MEPOITEM-PLIFZ = ZZPLIFZ.
     LS_MEPOITEM-NETPR = V_NETPR.
Set the Item data
    CALL METHOD IM_ITEM->SET_DATA
      EXPORTING
        IM_DATA = LS_MEPOITEM.
Try this.
I hope this will help.
Message was edited by: Lanka Murthy

BADI ME_PROCESS_PO_CUST with ME21N

Hi.
I'm using the BADI ME_PROCESS_PO_CUST, i create an implementation and i'm using the method process_item to make some checks in the field Payment Term (autocomplete this field from the table lfm1 acording to lifnr). I have a problem, when i hold a PO and after open it and save it the method process_item dont work (because i dont do any change in the PO). Anyone know some way to do this cheks in a held PO? I try to using the method open to do this but dont work either. Thx (sorry for my english)

Yes, i use this method too. I get the data from im_header to a variable X, change the fileld zterm (if the conditions are true) and use the methos im_header->set_data ( X ); but the change is not visible in the screen and when i save lost this change.

BADI ME_PROCESS_PO_CUST Implementation is not called

Hello,
I have created a test implementation(local object) for BADI ME_PROCESS_PO_CUST and implemented the Process_Item method to compare item price with material master commercial price. I have also activated the implementation.
When I create a PO using ME21N, this implemenation is not getting called. I have put a breakpoint in the implementation but processing doesn't stops here. Also I am not able to find 'Where used' of the BADI name or the interface 'IF_EX_ME_PROCESS_PO_CUST'.
What are the reason for above behaviour? Do we maintain this BADI name in some Customizing Table?
Please help.
Regards,
Shubham

i did the same as you did and the code is clearly getting triggerred.
Samle Code:
DATA : l_header TYPE REF TO if_purchase_order_mm.
DATA : l_conditions TYPE mmpur_tkomv.
DATA : l_item LIKE LINE OF l_conditions.
DATA : l_data TYPE mepoheader.
CALL METHOD im_item->get_header
    RECEIVING
      re_header = l_header.
CALL METHOD l_header->get_data
    RECEIVING
      re_data = l_data.
CALL METHOD im_item->get_conditions
    IMPORTING
      ex_conditions = l_conditions.
CALL METHOD im_item->set_conditions
    EXPORTING
      im_conditions = l_conditions.
if i put break-point on any of these methods the implementation is getting trigerred.

BADI ME_PROCESS_PO_CUST get item nr

Hi experts,
I would like to get the item number EBELP in a purchase order ME21N, ME22N.
My problem is that when I change of item, I can't get the item n° in the BADI ME_PROCESS_PO_CUST
Thks for help,
Ant

Yes , you can get that values.check this .
badi: ME_PROCESS_PO_CUST
method:PROCESS_ITEM
data:ls_mepoitem TYPE mepoitem,
       ls_mepoitem_prev TYPE mepoitem,
    ls_mepoitem = im_item->get_data( ).
    CLEAR ls_mepoitem_prev-netpr.
    SELECT SINGLE netpr FROM ekpo
    INTO ls_mepoitem_prev-netpr
    WHERE ebeln = ls_mepoitem-ebeln
      AND ebelp = ls_mepoitem-ebelp.
      if ls_mepoitem-netpr GT ls_mepoitem_prev-netpr.
       MESSAGE 'Not Allowed to change values of Previous years WBS'
        TYPE 'E'.
        ENDIF.

BADI ME_PROCESS_PO_CUST AND BADI ME_DEFINE_CALCTYPE

Hi,
How do I change the pricing type when creating aPurchase Order using BADI ME_PROCESS_PO_CUST and ME_DEFINE_CALCTYPE.
I need to set the value IM_DATA-Calctype = 'B' (Calctype) on the first badi.
Please help!

hi this is the code:
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
DATA:   RE_DATA TYPE MEPOITEM,
          IM_DATA TYPE MEPOITEM.
     CALL METHOD IM_ITEM->get_data
     RECEIVING
        RE_DATA = RE_DATA.
MOVE 'B' TO RE_DATA-calctype.
CALL METHOD IM_ITEM->set_data
         EXPORTING
            IM_DATA = RE_DATA.
endmethod.
Upon creation of PO error message prompt
'Data from Business Add-In ME_PROCESS_PO_CUST not adopted'

Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST

Hello all,
I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields.
So, my question is how do I handle line selection in the context of these BAdIs? Is there a way to know which lines have been selected and then only change the data in those items?
I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet.
I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N. However, I haven't found a way to work with it. It doesn't get passed to any of the methods in the BAdIs, as far as I know.
January 27, 2012 **************
We were able to capture the lines selected by using code from method mass_change in Include LMEGUICJK, Function Group MEGUI. The lines are in the lt_models table.
So, now my issue is getting data to save in ME22N. When I put data in my custom tabs and select a line, the data gets changed on the screen but does not save. It does work when I make a change in another field, like changing the description for instance. I'm using the set_changed method in Process_Header from ME_PROCESS_PO_CUST but it doesn't work.
I'm getting the idea that I'm the first ABAP developer to try this...
Thanks for any help.
Kind Regards,
Chris
Edited by: Chris Mowl on Jan 11, 2012 10:33 AM
Edited by: Chris Mowl on Jan 11, 2012 4:24 PM
Edited by: Chris Mowl on Jan 27, 2012 10:57 AM
Edited by: Chris Mowl on Jan 27, 2012 2:00 PM

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

How to fetch newly updated item data in BADI ME_PROCESS_PO_CUST?

Hi Everyone,
While changing a PO, I have a requirement where I need to only modify fields of newly added items of a purchase order and keep the values of existing items as it is. I have implemented the BADI ME_PROCESS_PO_CUST for this. but not able to know how to achieve this requirement. please suggest a solution.
Thanks and Regards,
Indudhar P.G

Hi,
interfaces for PO header and item have method is_persistent. This method returns true if the item/header is persistent which is equal to that it has been written to DB. So new items are not be persistent and old items are persistent.
Cheers

BADI ME_PROCESS_PO_CUST

hi experts,
we are using me59n to create the stock transfer orders from stock transport requisitions. the requirement is during the creation of STO we need to stop the creation of STO for some of the STR based on custom logic. the logic needs the STR number.
i tried "check" method of BADI ME_PROCESS_PO_CUST and it seems working. i was able to stop the creation of PO based on some condition. but, in the actual requirement i need to to know STR ( that is purchase requisition number ) number in the method. based on the values in STR i need to stop the PO creation. i have checked the import parameters of the method but could not find anything.
but when i went inside IM_HEADER associated type IF_PURCHASE_ORDER_MM I this is the importing parameter of the "check" method) i found a method IF_MESSAGE_OBJ_MM~GET_PARENT. I am not sure whether this will help? or is there any other way u think i can get the STR number in this method.
or is there any other BADI / exit to meet this requirement.
thanks

no replies from anybody

Badi ME_PROCESS_PO_CUST-PROCESS_ITEM

Similar Messages

Maybe you are looking for