Badi Multiple Use and Filter Dependent.

Dear Experts,
i Have enough Documents on Badi.
and My question is If we implement the Multiple Use the program calls all active implementations in Dynamic sequence.
to Call Particular Implmentation do we go for Filter dependent?
or is both concepts are independent .
Let me Know the difference
Regards
Raj.

Yes,Both Concepts are independent.
If the BADI Has checked with Muliple use check box then u can implement multiple implementation for that BADI for example check the BADI ME_PURCHDOC_POSTED Attributes tab.
If the check box is marked with Filter-dependent then u can implement based on the data element.Example check the BADI NOTIF_EVENT_SAVE Attibutes tab.

Similar Messages

Difference between multiple use and filter depend in BADis

Dear Experts,
Can u plz tell me the major difference between MULTIPLE USE and FILTER DEPEND types in badi definition.Is it possible to create a BAdi definition without selecting none of them
Thanks & regards,
vineel

You can differentiate between single-use and multiple use Business Add-Ins. The distinction is based on the procedure or event character of an enhancement. In the first case, the program waits for the enhancement to return something, usually a return code. A typical example could be a benefit calculation in HR. Depending on the implementation, alternative calculations can be executed. With multiple use add-ins, an event that may be of interest to other components is processed in program flow. Any number of components could use this event as a hook to hang their own additional actions on to.
Business Add-Ins may be implemented on the basis of a filter value. If an enhancement for country-specific versions is provided for in the standard version, it is likely that different partners will want to implement this enhancement. The individual countries can create and activate their own implementation.
Enter a filter type when defining your enhancement (a country or industry sector, for example). All methods created in the enhancement's interface have filter value FLT_VAL as their importing parameter. The application program provides the filter value for the enhancement method. The method then selects the active implementation for that value.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm

BADI: Diff between Multiuse & Filter Dependent

Hi All,
I would like to know whats the diff between Multiuse and Filter Dependent, Filter Types and Defined Filters.
Thanks,
Santosh

Multiple Use
This property defines whether during the initialization of a BAdI object using GET BADI just one implementation needs to be selected through the specified filter values, or whether an arbitrary number of implementations (or no implementation at all) can be selected.
If more than one implementation is selected at GET BADI for a BAdI provided for single use, the exception cx_badi_multiply_implemented is triggered. If no implementation is found, the exception cx_badi_not_implemented is triggered.
Use
You can define whether a BAdI is to be provided for single or multiple use. In the standard version, a BAdI is provided for single use, but a multiple use can also be selected.
In the case of a multiple use, there is a general restriction in addition to the general restriction regarding variable attributes that the BAdI methods must not have any EXPORTING or RETURNING parameters. The reason for this is that, if you have a call with CALL BADI, the methods of all the object plug-ins referenced by the BAdI object are called and that there is no definition regarding from which of the implementations a returned value will actually come. CHANGING parameters, on the other hand, are allowed since these are changed by all the calling methods, one after the other, so that a method can also access the parameter changed in a previous method.
Regards
- Gopi

How to Use and Filter Table contents after execution of Bapi

Can anybody guide me how to Use and Filter the table Contents which i got after successful execution of a Bapi
I used Component Controller in my Project
Ex: My table contains Redundant data for a single column but i want to display the column contents with out Redundancy
Name
Raghu
Raghu
Raghu
Debasish
Debasish
I want to filter the table contents and i want to display the table with out Redundancy
and Even when i am using a Dropdown i selected a Column from a Table as the values for that Dropdown but that table is having redundant data and the same data is getting displayed in that Dropdown i want the Dropdown to display data with out redundancy
Thanks

I also got that problem recently and after debuging for a while I figured out, that it was resulting from an error in my table's model: When the model received new items to display I
1.) Fired an delete event for the old items
2.) Fired an insert event for the new items
Problem was that when firing the delete event I didn't already assigned the new items to the model. Therefore it had still the old row count.
Maybe you have also a faulty table model?...

How to Pass Filter value to Filter dependent BADI ?

Hi,
I am having some doubt related to CRM Badi's there are two types of BADI's one is Muliple use badi and other in Filter dependent BADI.
    Incase of filter dependent BADI. when we are creating implentation for filter BADI how to pass this filter value to that new implentation.i.e. if we are going to see the importing parameters for Each method of that Filter Dependent BADI.   the 1st importing parameter for each method is FILTER VALUE for each method in Filter Dependent BADI.
      So my question is that how to map this filer value while creating new implentation for Filter Dependent BADI ?
     It will Automatically get this importing filter value or we have to do any coding for this ????
for this you can refer badi : CRM_ISA_BASKET_HEAD
this Badi defination is filter dependent.
Please let me clarification for this .perfect answer will be rewarded !!!!
Regards,
Amol Tambe
SAP CRM Technical Consultant.

Hi,
If this is the case. Then what is the use of filter in that if it is automaticaaly getting mapped i.e. How the filter will restrict the use for Badi ??
          I am not getting it ??????
Because for every simple badi when we are going to creat the implenation it will work fine without any restrictions by getting all importing values automatically.
And incase of filter depednt Badi also its going in same way it will get its filter value automatically so both the cases are same for Filter dependent badi and simple badi.
Then what is the use of Filter value ????
Regards,
Amol Tambe.
SAP CRM Technical Consultant.

Multiple Use BADI help

Hi
do you think it is appropriate to give as example calculation of shape (square, rectangle, triangle)
as an example to BADI Multiple use?
can you give me a tips on how i can start

Hi,
Pls go through the following links
BADI's
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/web/BAdI
http://www.allsaplinks.com/badi.html
New to Badi
Thanks,
Reward If Helpful.

Creation of filter dependent Custom BADI defination.

Hello,
How to create a custom BADI definition (ECC 6.0), so that I will be able to make it filter dependent.
I need to create an implementation of the same as per Logical system name filtering for ALE processing.
I tried to create Enhancement Spot and then created BADi but not able to make it filter dependent.
Please suggest.
Thanks.
Edited by: Parthasarathi Mohanty on May 20, 2011 2:46 PM

Hi,
I tried to create an independent custom BADI definition and make it filter Dependant.
So that I can create my own implementation and call that in a Standard BADI method.
Through SE18, it's not allowed to directly create BADI, I created an enhancement spot but while creating BADI in this process, it not giving me the option to make it filter dependent.
Is there any special process to create an independent BADI definition & to make filter dependent in ECC 6.0.
Thanks.

Multiple use badi

hi guru,
i am new in abap,
if we have 20 badi's using multiple implimentation.which one trigger first.it is necessary to deactive all badi before running new badi name of some single use ,multiple,filter dependent badi in crm.

Hi,
As per my understanding, your query is this - for a single BAdI there might be multiple implementation and which one will be triggered first.
As per SAP, there is no guarantee of the order of the call of the BAdI Implementation, but only thing that can be guaranteed is that all the active implementation will be called. You don't need to deactivate any Badi before implementing your BAdI.
I hope this answers your question.
Some important BadI's of SAP CRM are - ORDER_SAVE, COM_PARTNER_BADI, etc.
Thanks,
Samantak

Problem in creating new implementation for filter dependent badi

Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!

Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM

Filter Dependent BADI - All Country codes to be included

Hi,
I am using a BADI 'CMS_RE_LR_DIALOG' which has a filter type 'CMS_RE_DTE_LR_ID'.
This BADI is used in conjunction with a screen field that can take as inputs the 'country codes'. However currently this BADI has only one implementation for the country code 'DE' (Germany) and this is a SAP implementation and should not be modified. The requirement is that I need to include all the country codes in this BADI so that the associated transaction is executed for all country codes.
Could anyone brief me how this could be done? One procedure would be to create an impl each for every country code, however this is not a feasible solution. Is there any other way in which we can pass all values in a structure to the filter type? I tried using the data element LAND1 for this purpose, but not getting the required output with it.
Kindly pitch in your inputs as to how this could be implemented.

filter is implemented in se18 in badi definition.
certain times u may require to implement certain checks based on country so u can specify the country element as key and implementa filter dependant badi.
кu03B1ятu03B9к
Edited by: kartik tarla on Feb 15, 2009 12:46 PM

Multiple use Badi implementation

Dear Experts,
I have created a custom BADI definition of multiple use type and one implementation for it n it is working fine but now i want to create multiple implementations for it.
But when im trying to use method of second implementation in my program its raising an error that this method is not defined.
Hope u understand my query.Plz explain me with an example that how to implement multiple use BADI's.
Thanx in advance.

Hi,
You can implement several BADIs based on the same definition if FILTER option or MULTIPLE USE option are active.
In this way you can have (implement) the same method does different actions according to the BADI where it's defined.
So you can use the FILTER to decide which method (BADI) has to work.
If the FILTER isn't active a definition of a BADI can use once, so it can implement only ones.
But if the flag MULTIPLY USE is active it can use the same BADI for several implematations.
In this case every BADIs'll works because there isn't a filter.
So you can implement several actions.
See this Weblogs,
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
See here:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/user/view/cs_msg/9494
http://www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
Regards,
Padmam.

Unable to check multiple use check box for BADI

Hi,
In ECC 6.0, when I am trying to activate the multiple use check box ( For multiple implementation of BADI ) , it is not allowed me the same.
Throwing the error as - interface IF_EX_TAX1_XTXIT_SET can not be used.
BADI name - BADI_TAX1_XTXIT_SET
Can anyone pls help me how to do this.
Thanks,
Shakti

Hello Sakti,
I am also in ECC6.0 & if i see the definition of the BAdI BADI_TAX1_XTXIT_SET, "Multiple Use" checkbox is checked! What are you trying to do - trying to create an implementation?
@Prabhu: Although the BAdI is "multiple-use", but there is not filter applied to it. Next time do your checks properly before replying
BR,
Suhas

About BAdI's Atribute: Multiple-Use

Hi all,
I found a BAdI that may be very useful for me. But its attribute "Mutiple Use" is not selected. When I create an implementation,I find it can not be activated. Could you tell me why? And Can I use this BAdI ?

Hello Alex
Since the flag "Multiple Use" is not marked you can have only a single active BAdI implementation.
There is another standard or customer implementation which is already active (check in SE18 menu ... -> Overview: here you see all current implementations, active and inactive ones).
You need to check if you can inactivate the current active implementation without any harm to the affected processes. Afterwards you can activate your implementation.
Regards
Uwe

How many implmentation allowed of BAdi with multiple use option???

Dear all ,
 I have doubt in BAdi implementation -
Case 1 - I have create a z badi with multiple use option enabled . than i create two implementation of that BAdi . when i call it from my z program than it will call only one which was created 1st so what is use of 2nd implementation and when it will call ???
Case 2 - Same case for tcode VD02 their is badi CUSTOMER_ADD_DATA which is also multiple option enable Badi
 for this also i have created 2 implementation but in this case when i create 2nd implementation it asked for migration of implementation why ???
Thanks

Dear deepak ,
 i have check it both implementation showing yellow color please check my z program and tell me what is wrong in this .
REPORT Y_BADI_EXP1.
CLASS cl_exithandler DEFINITION LOAD.
DATA : l_badi TYPE REF TO ZIF_EX_MYBADI,
 email TYPE AD_SMTPADR,
 email1 TYPE AD_SMTPADR..
PARAMETERS : p_user TYPE sy-uname.
START-OF-SELECTION.
CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
EXPORTING
EXIT_NAME = 'ZMYBADI'
NULL_INSTANCE_ACCEPTED = 'X'
CHANGING
INSTANCE = l_badi " here it will return 2 implementation ZMYBADI_IM1 , ZMYBADI_IM2
EXCEPTIONS
NO_REFERENCE = 1
NO_INTERFACE_REFERENCE = 2
NO_EXIT_INTERFACE = 3
CLASS_NOT_IMPLEMENT_INTERFACE = 4
SINGLE_EXIT_MULTIPLY_ACTIVE = 5
CAST_ERROR = 6
EXIT_NOT_EXISTING = 7
DATA_INCONS_IN_EXIT_MANAGEM = 8
OTHERS = 9
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD l_badi->GET_USER_EMAILID
EXPORTING
uname = p_user
CHANGING
emaill = email.
WRITE : /5 email. " when o/p comes it shows only 1st implementation .
i placed break point in methods of both implementation but as usual it stop only at first method ???

Can Single Use standard BADI be converted to Multiple Use

Is it possible to make standard BADI a Multiple Use when it is single use?
I hope it is not.
Please confirm.
Thanks,
Arshad

Hello Arshad
If a BAdI is defined as single-use (SE18) then you can have only a single active implementation within the system. Thus, the answer to your question is: No, it is not possible.
However, there may be the reverse situation where you have a BAdI defined as single-use but would like to have multiple implementations. In this case you have to adjust the single active implementation and instantiate other implementations if certain conditions are fulfilled, e.g.:
Active implementation of a BAdI should be: ZCL_MY_BADIIMPL_01
You create a second implementation (not active): ZCL_MY_BADIIMPL_02
Within the methods of ZCL_MY_BADIIMPL_01 you could code:
DATA:
 lo_badi2 TYPE REF TO <BAdI interface>.
IF ( <condition is fulfilled> ).
 CREATE OBJECT lo_badi2 TYPE ('ZCL_MY_BADIIMPL_02').
* Call methods of second BAdI implementation
ENDIF.
Regards
Uwe

Badi Multiple Use and Filter Dependent.

Similar Messages

Maybe you are looking for