BADI or EXIT name for t-code CJ20N
Hi Guru ,
" In cj20n for any project for activities we have user fields that user field check box should be checked in the time of Confirmation. "
Which BADI or EXIT can be use .
I am trying to use one Exit - CNEX0001 but it will triggered only when we select thats check box .But I want the Exit or BADI name which will trigger all the time when we will go for confirmation .
Hello,
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
OR go to se80
give the Package name
Thank u
santhosh
Similar Messages
-
BADI OR USER-EXIT NAME FOR CJ20N
Hi GURU ,
Is there anyother BADI which is triggre in the time of Confirmation .
The process is - CJ20N -
> Internal Activity -
> User Field -
> U can select or Not Check box ( I need when we will not select Check Box ) -
> EDIT -
> Activity -
> Confirm .
In this time which BADI / EXIT is trigger .Hi,
Please check in package CJBADI....there u will get relavent BADI for T.CODE CJ20N....
hope this will help a lot...
Regards,
Kranthi. -
Can anyone give me user exit name for create/update purchase order partners
Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.hi,
check these exits.
Transaction Code - ME21N Create Purchase Order
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number -
Enhacement component EXIT name for 0EQUIPMENT_ATTR
Hello,
I am enhacing 0EQUIPMENT_ATTR, and in CMOD i created a project.
What is the Enhancement Component EXIT name for 0Equipment_attr to assign to my project?
Please help me in this!
Thanks in advance.Thanks for your reply Mti.
I could able to enhance the extractor by using:
Enhancement component: RSAP0001
Function exit: EXIT_SAPLRSAP_002.
This Document helped me a lot:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46?quicklink=index&overridelayout=true -
BADI or EXIT Required for QM01,QM02,QM03
BADI or EXIT Required for qm01 Create Notification:MCDR-TOOL Screen To Validate DeviceData i/p Field so that the user can enter their LOT NO Correctly .
similarly In QM02 - Serial Number Field And In QM03.
Quick Response is appreciated.Hi
" Enhancement QM01 IWO10026 IWO10027
IWOC0001
IWOC0002
IWOC0003
IWOC0004
" BADI's QM01
IWOC_OBJECTINFO_CHNG
IWOC_LIST_TUNING
IWO1_SUBSCREEN_0170
IQS_MASS_CHANGE
IQS0_STATUS_MAINTAIN
NOTIF_AUTHORITY_01
WOC_FL_DETERMINE
Thanks & REgards -
Is there another name for printer code?
I do not see where it says "printer code" on anything that I am using with the D110 printer. Is there another name for printer code? Please help me find.
The printer code is the first part of the email address assigned to your printer. For instance ,everything before @hpeprint.com.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
How to find User Exits/ Enhancments/ BADI's for T-code CJ20N
Hi All,
In T-code CJ20N, assume there are two fields A & B. User will input value in A, based on A value I need to fill B field. So I need to find first suitable User Exit/ Enhancment/ BADI.
Kindly help me in this regard. Pls tell me how to find User Exit/ Enhancment/ BADI for a given t-code.
Regards
Jaker.Hi,
Check the following , this might help,
1. CNEX0037
2.CNEX0038
3.CNEX0039
Regards
Kiran Sure -
How to change the Tab Strip name in T-Code CJ20N?
Dear All,
I have done one Screen Exit to add 5 additional fields in the T-Code CJ20N using Enhancement CNEX0007.
I got one extra tab "Cust. enhancement" in T-Code CJ20N.
Now my requirement is that the name of the Tab Strip "Cust. enhancement" should be changed into "User Tab2".
Can any one guide me how to do that?
Thanks & Regards,
Neerajhi niraj
how u add fields in cj20n
please dive me steps
of that.
Thanks in advance
chetan -
BADI / USER-EXITS available for Txn. QE01
Hi Experts,
Could anyone please suggest appropriate BADIu2019s and user-exists available for Txn. QE01 to send the status change.
Our requirement is to send a mail notification to the user when all the result recording status of the inspection characteristics turn to 'complete'
In Tx QE01 the inspection results are recorded for each inspection characteristics.When results recorded for all the characteristics the user will close the insp. characteristic and the status will change to 'complete' then needs a mail notification so that user decision (UD) can be performed for the inspection lot.UD (Txn QA11) will be performing after result recording.
Any suggestion will be appreciated.
Thanx and RegardsHi ,
Please check below BADI and User exits .
Bus. add-in name Description
QE_RESULT_VALUATION "Valuation of Single Values
QE_SAVE "Save Results
QEEM_SUBSCREEN_5000 "EE: BAdI Subscreen for Display of Data on Screen 5000
QM_IDI_INSPPOINT "Changing of Inspection Point Processing in IDI and BAPIs
QM_INPUT_PROCEDURE "Input Processing
Exit name Description
QEEM0003 "User exit: add. functions after valuating insp. characs
QEEM0004 "User exit: add. functions after valuation of partial samples
QEEM0006 "User exit: add. functions after closing inspection characs
QEEM0007 "User exit: add. functions after completing partial samples
QEEM0011 "User exit: add. functions before valuating insp. characs
QEEM0012 "User exit: add. functions before valuating partial samples
QEEM0015 "User exit: add. functions after entering individual results
QEEM0020 "User exit: additional functions after entering the inspector
QEEM0021 "User exit: additional functions for user key +US1
QEEM0022 "User exit: additional functions for user key +US2
QEEM0023 "User exit: additional functions for user key +US3
QEEM0024 "User exit: additional functions for user key +US4
QEEM0029 "User-Exit for Characteristic Overview Subscreen
QEEM0030 "User-Exit for Subscreen: Characteristic Single Screen
QEEM0031 "User-Exit for Table Structure with External Numbers
QEEM0032 "Presentation of the characteristic text in the logon lang.
QEEV0003 "Determination of order type for print
QIST0002 "Generating MATERIAL_DATA for QM STI Interface
QIST0003 "Generating VENDOR_DATA for QM STI Interface
QIST0004 "Generating CHARACTERISTIC_HEADER for QM STI Interface
QIST0005 "Generating CHARACTERISTIC_QUANTITATIVE for QM STI
QIST0007 "Generating SAMPLE_HEADER for QM STI Interface
QIST0008 "Generating RESULTS_ADDITIONAL_DATA for QM STI
QIST0009 "Generating RESULTS_QUANTITATIVE for QM STI Interface
QIST0010 "Generating REPORT_HEADER for QM STI Interface
QIST0011 "Generating METHOD_DATA for QM STI Interface -
BADI/User Exit suggestion - for determining Partner in PO header
Hi All,
I want to be able to automatically populate and determine a manual partner function within the header of a purchase order creation.
Example, when PO is allocated against account assignment 'P' then go to the WBS element assigned and retrieve the specific partner number for partner function type XX. Then populate this into the relevant header partner function of the PO.
Any ideas of which BADI/User exit could be used in ME21N?
Thanks
SteveHi Steve
Before going to search the UserExit/BADI, please remember your account assignment will be at item level and the partner will be at Header level.If you have number of line items with different account asssginments or different WBS elements under account assignment P, it is difficult to determine the partner functional at Header level.Please think on how can you build logic? There are number of BADI/Exits available for Purchase order.
Regards
Ramakrishna -
BADI-User exit required for updating Purchase order header field -IHREZ
Hello All,
We have requirement in our business to update the purchase order header field "our reference" EKKO-IHREZ with some text field. We need a BADI/user exit that can be used for updating this field . We have checked the BADI ME_PROCESS_PO_CUST and unfortunately we are not able to use this BADI as it getting triggered in enjoy SAP transactions ME21N , ME22N etc. We are not creating the purchase order manually and we are using ME59N for creating Purchase order . Hence we are looking for some user exit/BADI that can be used in ME59N for updating the purchase order header field IHREZ.
Thanks in advance for your immediate response .
With regards,
Joseph Anand BTRY using the exist u2022 EXIT_SAPLME59_001
You can also later on add this field by BAPI_PO_CHANGE -
Enhancement/exit name for Account assignment category for tcode XD01
Hi Gurus,
Can you tell me Exit name/Enhancement name To populate the proper
Account Assignment group based on the type of customer and the relationship of the customeru2019s country to that of the sales organization while creating customer master record using tcode XD01Hi
For this u need to ehancement Point.
Regards,
Raghu. -
Problem to find Exit Name for me52n
Dear all,
Recently i've facing a problem for finding the exact Exit Point for transaction ME52N.Can anyone please help me for finding this?
regards,
sameek.Hi, read http://www.surfingincognito.com/index.php?q=aHR0cDovL2ZvcnVtcy5zZG4uc2FwLmNvbS9tZXNzYWdlLmpzcGE%2FbWVzc2FnZUlEPTQ0OTU5MDE%3D You can use inside of methods additional metods-GET_ items, GET_DATA. Please ask from your abaper, he'd know how to use it
Also check this ME51N / BADI ME_PROCESS_REQ_CUST
Edited by: alex ice on May 7, 2011 12:47 PM -
Program name for Transaction code
Hi All,
Is there an other table for program name for a given transaction code other than TSTC? I am asking this question beacuse for TCODE MM01, program name in TSTC is given as SAPMMG01, where as if you goto MM01->System->Status->Program it is giving as SAPLMGMM.
Regards,
Prashant.Hi All,
I want the table name for TCODE other than TSTC.
Regards,
Prashant. -
BADI or Exit Required for Sales Order
Hi Experts,
In the sales order, when i entered the item, depend upon the pricing determination I need to display message with condition base value and a popup should be automatically raise with 3 variants.
Can any one suggest me the suitable BADI or Exit for this.
Thanks in Advance.Hi,
Can please elaborate more about your question.
Regards
Goutham
Maybe you are looking for
-
TS1368 How can I enable my iTunes Store account ?
I need to enable my iTunes Store account , how can I do that ?
-
Problems with Customer Service AND unexplained charges!
I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel fi
-
Error in J1INCERT while generating the tds certificate
Dear All, when i do the J1INCERT, geting the error mesge no data selected for printing. Please help me on this. Best Regards, Venkat, 9616246748.
-
i'm currently trying to make a simple cd cover using iPhoto to add to itunes. Is there any way i could add text to a photo that i have in the iPhoto library?
-
Delivery split through VLSP along with JIT Calls with AW Partner profiles
Hi SAP SD/LE Guru's, I have one critical issue to resolve immediately in my implementation of SAP 4.6C system in multinational automotive industry. It's in the area of Delivery split along with AW - Duns number partner profile and JIT calls. Here is