BADI or User-Exit for Adding New Input Field in 0VTC
Hi Experts,
Has any of you worked on enhancing transaction 0VTC (Define Routes and Stages)? I have a requirement right now to add two new input fields in New Transport Routes screen. Could anyone provide a BADI or customer exit that I could use to modify the screen of the transaction?
Thanks!
Cross post locked
Edited by: Rob Burbank on Mar 8, 2009 2:58 PM
I'm concerned about the layout of the screen. Also, I didn't find any documentation about BADI_SD_ROUTE. Can anyone provide me the documentation for this BADI?
Thanks!
Similar Messages
-
Is there a badi or user exit for including new field in XK01 ?
Hi
We have a legal requirement for incluiding new field in T/C XK01, is there a badi or user exit wich help it?
Thanks in advance.
Moderator message: please (re)search yourself first.
Edited by: Thomas Zloch on Dec 16, 2010 4:01 PMCan anyone provide the documentation for this BADI? Also, I'm concerned about the layout of the screen. Can this BADI do the necessary changes on the layout of the screen?
Thanks! -
BaDi or User-Exit for a new column in COGI
Hi everybody,
is there a User-Exit or a BaDi to add a new column in the TA COGI?
Maybe anyone have an idea!
Best regards,
MarkusBefore Posting Pls try to Search from the Forum...definitely will be find ur Answer
Pls Check the Exits Associated to COGI
Exit name Short text
CONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default values
CONFPI02 Process order confirmation: Customer spec. input checks 1
CONFPI03 Process order conf.: Cust. spec. check after op. selection
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when saving
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default values
CONFPM02 PM/SM order confirmation: Customer specific input checks 1
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 PS confirmation: Determine customer specific default values
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. selection
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when saving
BADI Used for COGI
VIM_AE_BADI
Try to Implement Ur Code in Suitable User Exit or BADI.
Reagrds,
SD -
BADI or User Exit for updating MSEG
Hi,
We are using ECC 6.0 and here is the scenario that we have to update custom fields into VBAP, LIPS and MSEG tables when these fields are entered on the sales order screen VA01,VA02.These field are added on this screen using Additional Data B screen.Also, These fields are there in VBAP and LIPS through Append Structure and MSEG through CI_COBL.Is there any BADI or USER EXIT for this.Thanks in Advance.
Priya.Hi
You can use exit ZXMBCU02 ( Function EXIT_SAPMM07M_001
in SAP enhancement MBCF0002 ). Here also whtever changes you make to I_MSEG will be lost as MSEG is an importing parameter. You can do something like this.
FIELD-SYMBOLS <F1> TYPE MSEG.
DATA NAME(50) VALUE '(SAPMM07M)MSEG'.
ASSIGN (NAME) TO <F1>.
<F1>-KOSTL = 'XXXX'.
( In above example MSEG-KOSTL will be set as XXXX, you can change any of MSEG fields in above way. ).
Cheers -
BAdI: or User Exit for Campaign Creation IN CRM 5.0
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshIN WHICH TRANSACTION U R CREATING CAMPAIGN ??
-
Badi or user exit for changing currency INR to EUR
hi friends,
in po header there is one tab called status.
in this tab there is one field called delivery payment
which has curr INR but i want to change that INR CuRR
to EUR.Can any one tell me how do this is there any badi or user exit
for this req.
thanks.Hi Sonu,
Use the following program to find out the appropriate user exist for ur transaction:
REPORT ZGURU_USER_EXIT_FIND .
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Then u can use the function CONVERT_TO_LOCAL_CURRENCY to change the amount from INR to EUR.
Regards,
Himanshu -
BADI or User Exit for Txn : CRMD_ORDER
Hi Experts,
Is there any badi or user-exits for the transaction crmd_order.
regrads,
arul jtohi aDear Arul Jothi,
BAPI_ACTIVITYCRM_CREATEMULTI
BAPI_BUSPROCESSND_CREATEMULTI
CRM_BUSPROCESSND_BAPI
CRM_LEADCRM_BAPI
BAPI_LEAD_CREATEMULTI
CRM_OPPORTUNITYCRM_BAPI
BAPI_OPPORTUNITY_CREATEMULTI
CRM_SLSTRANSACTCRM_BAPI
BAPI_SLSTRANSACT_CREATEMULTI
Also, visit the following thread:
Change status for sales order in crmd_order
BAdi/Enhancement:
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Regards,
Naveen. -
Hi Gurus,
I am looking for BADI's or User exits for transaction ME23n.
Exactly I am looking for BADI or user exit for the release strategy for the PO and then mailing it to th e apporover.
regards
kanishkadear ,
check out these two badi it may be useful for your requiremrnt
ME_RELEASE_CREATE
SMOD_MRFLB001
Cheers
fareed -
BAdI: or User Exit for Campaign Creation
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshDear Ganesh,
As campaign can be created and executed individually also, it will never check for higher level project ID.
Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan. -
Badi or user exit for allocation run (Tcode-J3AT) on save button
hi friends,
i m searching for the BADI or user exit for the Tcode J3AT on the save button press. if u know any badi or user exit for same pls let me know.
thanks and regards,
vicky.solved with the help of SAP note.
-
BADI or USER Exit for BP Adress check
Hi All ,
what is the badi or user exit for giving a additional check on Postal Codes when creating a BP ?
I have checked BUPA_ADDR_CHECK
BUPA_ADDR_EXPORT
BUPA_ADDR_IMPORT
BUPA_ADDR_UPDATE
BUPA_ADRREL_EXPORT
and the user exit ZXSZARU01
but when i am entering the postal code and pressing Enter , i am not able to catch the User/EXIt or badi .
Thanks for help.Hi
Use the BAdi : ADDRESS_CHECK
Implement the method: ADDRESS_POSTAL_CHECK
Once you enter the Post Code and Country on BP Txn, Pressing Enter will trigger this Badi for address check !
Good Luck !
Thanks
<b>Allot points if this helps !</b> -
User Exit for checking Purchase Requisitioner Field in CJ20N Transaction
Hi,
I want user Exit for checking Purchase Requisitioner field while making PR through CJ20N transaction. I have trie EXIT_SAPLEBND_001 user exit. Problem in this user exit is I am not getting Purchase Requisitioner No & Item No in I_CEBAN
structure.
Please suggest what to do ?
Regard's
ShabbirHi,
You can check with this BADI ME_PROCESS_REQ_CUST.
Kindly refer below mentioned link for further details:
Badi ME_REQ_POSTED For CJ20N Transaction
Hope this will help you.
Regards,
Mudita -
VT01N User exit for adding additional field to VTTP table and populate the
Hi,
Can any one sujjest what is the use exit/bapi when we add(append) a custom field to vttp table to populate the incremental number based on ship to address when we create a shipment..
need user exit in ...............to populate data to vttp table custom field when we append......hi,
check these exits for vt01n.
Transaction Code - VT01N Create Shipment
Enhancement/ Business Add-in Description
Enhancement
V56USVDP Preparation for updating new objects for transport?
V56USVDO Update new objects for transport
V56USTAT User-individual definition of transportation planning status
V56UNUMB Shipment number allocation
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO Check shipments are complete
V56UCHCH Shipment processing: Check whether changes were made
V56TDLIF Filter Delivery Items for Shipment
V56SLDET Shipment processing: Leg determination
V56MVT04 Extensions for Collective Processing of Shipments
V56LOCID Shipment Processing: Determine Location Identification
MV56AINI Initialization of transaction control for transportation
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI Read Delivery Data for Shipment Processing
Business Add-in
BADI_LE_SHIPMENT BadI: Shipment Processing
BADI_V56N User Exit for Message Determination: Shipment -
User-exit for call new customize screen of another new program
Hello, I'm very appreciate for all who read this topic and give me some advice.
Anyone has an experience about customize standard program to create new screen
and add new screen to pop-up when user click some standard button to do something
for support business requirement and then continue to working the old step (such next old screen).
In QA11 (Manual UD), For posting stock quantity (After click button "Stock for inspection lot")
Business requirement need to avoid user to input stock quantity for unrestriced used (UR) and block
by after click button "Stock for inspection lot". Need to customize to pop-up new created screen for user
to choose sub-set of this inspection lot to post for UR or block by check box (Just overview)
Then after finish to select, Need to go back old screen ("Record UD : Stock" Screen) and default sum
of UR and block into screen (Automatic) for post to mvt.type 321, 350 later.
After checked, Not have any screen-exit after clicked button "Stock for inspection lot".
but i found 1 user-exit which was called after click above button.
So, Can i use user-exit to call new customize screen?
If need to go back from new customize screen to main screen, May have any problem? How to do it?
If finish to do in new customzie screen and need to continue display next old screen. How to do it in PAI of new customize screen.
Thank in advanceCan anyone provide the documentation for this BADI? Also, I'm concerned about the layout of the screen. Can this BADI do the necessary changes on the layout of the screen?
Thanks! -
BADI or User exit for FB50 to update custom field in table COEP
Hi all,
i have added one custom field in table COEP through include CI_COBL .
when i do posting through sales order(VA02) or purchase order(ME22n) that custom fields in COEP get updated with controlling document
and through BADI AC_DOCUMENT i m updating that custom field in COEP.
but when i do manual posting through FB50 controlling document is generated in COEP but i m not able to update that custom field
because in this case BADI AC_DOCUMENT is not get triggered.
is there any BADI or User exit or enhancement spot for FB50 through which i can update that custom field in table COEPHi Sandy,
Thanks for u r reply,
RFAVIS01 is not getting triggered through FB50
and F180A001 ( EXIT_SAPLF048_001) is getting triggered but it doesnt contain COEP field in its parameter
import - F180A_DOC_HEAD_TAB
F180A_DOC_ITEM_TAB
changing - RELATION_TAB
Maybe you are looking for
-
The remote server returned an error: (503) Server Unavailable in search service
Hi I got this error message: when applying toplogy to search service I am applying admin component : SPINDEX Server crawl component-0 to : same index server spindex server in sharepoint farm has 1 applicationserver 1 index server 1 wfe server 1 db se
-
Does Adobe Reader for iOS have the ability to open inbedded links created with Acrobat Standard to additional PDF docs? If not, then what would be the best way to use these already created PDF's on an I Pad?
-
Hi Experts, I have an SOAP inbound interface comming to XI. The SOAP envelop has not prefixes defined. This message was genareted by Microsoft Bizztalk The message is generating error in mapping. But, when I run the interface with the same WSDL but u
-
Access request creation - select roles screen - field boxes were not aligned
I'm not sure if this is really the screen of SAP GRC 10.1 access request creation. The field boxes were not aligned. Is there a note to fix this issue? Thank you. Regards, Jenilyn
-
Configure Oracle Lite DB Connection
I'm using JDeveloper 10.1.2. How do I configure a DB connection in Jdev to connect to an Oracle Lite DB (the version that comes with BPEL)? Thank you, Dave