BADI or User Exit for role/profile assignment SU01/PFCG
Hi ABAP gurus,
I need a way, BADI, UserExit to do some verifications over a role or a profile before is assigned in the Tcode: SU01 and PFCG.
These verifications prevent the assigment of critical roles, transacction or access to tables.
Any information about this topic it would be very helpful...
thanks...
Hi RAFAEL ,
Only one exit is available for this Tcode SU01.No Exits available for PFCG
Enhancement SUSR0001 User exit after logon to SAP System
For SU01 we can check the profile assignment in program MS01CU10 and some AUTHORITY-CHECK:
AuthCheck MS01CC10 S_DEVELOP AUTHORITY-CHECK ABAP Workbench
AuthCheck MS01CU10 S_TCODE AUTHORITY-CHECK Transaction Code Check at Transaction Start
AuthCheck MS01CC10 S_USER_AUT AUTHORITY-CHECK User Master Maintenance: Authorizations
AuthCheck MS01CC10 S_USER_GRP AUTHORITY-CHECK User Master Maintenance: User Groups
AuthCheck MS01CC10 S_USER_PRO AUTHORITY-CHECK User Master Maintenance: Authorization Profile
AuthCheck MS01CC10 S_USER_SYS AUTHORITY-CHECK User Master Maintenance: System for Central User Maintenance
In the same way PFCG contains some AUTHORITY-CHECK:
AuthCheck LSUPRNU18 S_USER_TCD AUTHORITY-CHECK Authorizations: Transactions in Roles
AuthCheck LSUPRNU27 S_USER_PRO AUTHORITY-CHECK User Master Maintenance: Authorization Profile
AuthCheck LSUPRNU23 S_TCODE AUTHORITY-CHECK Transaction Code Check at Transaction Start
AuthCheck LPRGN_TREEI0O S_USER_AGR AUTHORITY-CHECK Authorizations: Role Check
I hope this may helpfull.
Thank you,
Thanks,
AMS
Similar Messages
-
BADI or User Exit for updating MSEG
Hi,
We are using ECC 6.0 and here is the scenario that we have to update custom fields into VBAP, LIPS and MSEG tables when these fields are entered on the sales order screen VA01,VA02.These field are added on this screen using Additional Data B screen.Also, These fields are there in VBAP and LIPS through Append Structure and MSEG through CI_COBL.Is there any BADI or USER EXIT for this.Thanks in Advance.
Priya.Hi
You can use exit ZXMBCU02 ( Function EXIT_SAPMM07M_001
in SAP enhancement MBCF0002 ). Here also whtever changes you make to I_MSEG will be lost as MSEG is an importing parameter. You can do something like this.
FIELD-SYMBOLS <F1> TYPE MSEG.
DATA NAME(50) VALUE '(SAPMM07M)MSEG'.
ASSIGN (NAME) TO <F1>.
<F1>-KOSTL = 'XXXX'.
( In above example MSEG-KOSTL will be set as XXXX, you can change any of MSEG fields in above way. ).
Cheers -
BAdI: or User Exit for Campaign Creation IN CRM 5.0
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshIN WHICH TRANSACTION U R CREATING CAMPAIGN ??
-
Badi or user exit for changing currency INR to EUR
hi friends,
in po header there is one tab called status.
in this tab there is one field called delivery payment
which has curr INR but i want to change that INR CuRR
to EUR.Can any one tell me how do this is there any badi or user exit
for this req.
thanks.Hi Sonu,
Use the following program to find out the appropriate user exist for ur transaction:
REPORT ZGURU_USER_EXIT_FIND .
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Then u can use the function CONVERT_TO_LOCAL_CURRENCY to change the amount from INR to EUR.
Regards,
Himanshu -
BADI or User Exit for Txn : CRMD_ORDER
Hi Experts,
Is there any badi or user-exits for the transaction crmd_order.
regrads,
arul jtohi aDear Arul Jothi,
BAPI_ACTIVITYCRM_CREATEMULTI
BAPI_BUSPROCESSND_CREATEMULTI
CRM_BUSPROCESSND_BAPI
CRM_LEADCRM_BAPI
BAPI_LEAD_CREATEMULTI
CRM_OPPORTUNITYCRM_BAPI
BAPI_OPPORTUNITY_CREATEMULTI
CRM_SLSTRANSACTCRM_BAPI
BAPI_SLSTRANSACT_CREATEMULTI
Also, visit the following thread:
Change status for sales order in crmd_order
BAdi/Enhancement:
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Regards,
Naveen. -
Hi Gurus,
I am looking for BADI's or User exits for transaction ME23n.
Exactly I am looking for BADI or user exit for the release strategy for the PO and then mailing it to th e apporover.
regards
kanishkadear ,
check out these two badi it may be useful for your requiremrnt
ME_RELEASE_CREATE
SMOD_MRFLB001
Cheers
fareed -
BAdI: or User Exit for Campaign Creation
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshDear Ganesh,
As campaign can be created and executed individually also, it will never check for higher level project ID.
Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan. -
Badi or user exit for allocation run (Tcode-J3AT) on save button
hi friends,
i m searching for the BADI or user exit for the Tcode J3AT on the save button press. if u know any badi or user exit for same pls let me know.
thanks and regards,
vicky.solved with the help of SAP note.
-
BADI or USER Exit for BP Adress check
Hi All ,
what is the badi or user exit for giving a additional check on Postal Codes when creating a BP ?
I have checked BUPA_ADDR_CHECK
BUPA_ADDR_EXPORT
BUPA_ADDR_IMPORT
BUPA_ADDR_UPDATE
BUPA_ADRREL_EXPORT
and the user exit ZXSZARU01
but when i am entering the postal code and pressing Enter , i am not able to catch the User/EXIt or badi .
Thanks for help.Hi
Use the BAdi : ADDRESS_CHECK
Implement the method: ADDRESS_POSTAL_CHECK
Once you enter the Post Code and Country on BP Txn, Pressing Enter will trigger this Badi for address check !
Good Luck !
Thanks
<b>Allot points if this helps !</b> -
Hi,
I'm looking for a BADI or User-Exit to modify a field in MSEG. This field is an IS-Oil component, but, I must modify this field when I make an outbound delivery.
I have tried the BADI MB_DOCUMENT_BADI but the system short-dumb when I modify the field. "The program tried to assign a new value to a field even though it is protected against changes.".
If you have any user-exit or BADI or any solution for this BADI please tell me.
Regards
FrédéricHi
You can use exit ZXMBCU02 ( Function EXIT_SAPMM07M_001
in SAP enhancement MBCF0002 ). Here also whtever changes you make to I_MSEG will be lost as MSEG is an importing parameter. You can do something like this.
FIELD-SYMBOLS <F1> TYPE MSEG.
DATA NAME(50) VALUE '(SAPMM07M)MSEG'.
ASSIGN (NAME) TO <F1>.
<F1>-KOSTL = 'XXXX'.
( In above example MSEG-KOSTL will be set as XXXX, you can change any of MSEG fields in above way. ).
Cheers -
Hi Gurus,
I need your assistance for the below requirement.
In AS01 ( Create Asset ), while creating ASSET the Equipment should be created. This syncronization is already done in the customization.
1.The requirement is the Equipment Field in the ALLOCATION Tab should automatically get the Asset Number Value once we click the ALLOCATION Tab.
2.And also the Equipment should be created only if the Evaluation Group 2 is 'Y'.
i checked all the Exits and BADI's available. But my requirement is not met. please help me in this.Hi,
Transaction Code - AS01 Create Asset Master Record
Exit Name
AAPM0001 Integration of asset accounting and site maintenance
AFAR0003 External changeover method
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
AIST0001 Exchange number range in master data maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
TRAN0001 User exit for asset transfer
Reward points if useful....
Regards
AK -
Any BADI or USER EXIT for Authorization check in ME51N
Dear MM Gurus,
My requirement is to assign Authorization to the User to create Purchase requisition based on the combination of Plant and Storage location. Is there any BADI or User Exit available to achieve this?
Regards
Yogahi,
> Its not possible to have the authorization for PR at storage location level...
> you can have authorisations for Puchase organisation EKORG, plantWERKS, puchase group EKGRP, puchase document type BSART ...
> and authorisations objects are:
>M_BANF_BSA : Document Type in Purchase Requisition
> M_BANF_EKG : Purchasing Group in Purchase Requisition
> M_BANF_EKO : Purchasing Organization in Purchase Requisition
> M_BANF_FRG : Release Code in Purchase Requisition
> M_BANF_WRK : Plant in Purchase Requisition
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Apr 27, 2009 3:01 PM -
BADI or USER EXIT for MIGO when changing order number
Hi experts, I'm looking for a BADI or USER EXIT in Tx. MIGO that is triggered after pushing ENTER when you change the order number. What I need to do is to propose the movement type depending on the order data. Thanks.
Not sure but you can try in BADi MB_DOCUMENT_BADI menthod:
MB_DOCUMENT_UPDATE -
Badi or user-exit for QA32 after save
I need a badi or user exit to execute exactly after save in QA32 ..I tried belows but they are not that i want
QPL1_SUBSCREEN_ADDON
INSPECTIONLOT_UPDATE
Check these Exits:
QEVA0004 Exit for changing information line in usage decision he
QEVA0005 User subscreen for displaying add. data for usage decis
QEVA0006 Entry to usage decision transactions
QEVA0007 UD: Control of compulsory comment or long text presetti
QEVA0008 Usage decision: Customer function key (e.g. to cancel U
QEVA0009 UD: Predefinition of quantity to be posted to sample st
QEVA0010 UD: Usage decision check
QLCO0001 QM: Call alternative costs report from UD
QSS10001 Possibility of calling a different print reportHello Tuncer,
have you checked the BADI QE_SAVE? This is the last possible chance of changing data on saving a QM transaction and should be active in QA32.
The only other solution I can come up with is a follow-up action i.e. for the UD-code
Hope this information proves usefull.
Regards
Isabelle -
BADI or User exit for FB50 to update custom field in table COEP
Hi all,
i have added one custom field in table COEP through include CI_COBL .
when i do posting through sales order(VA02) or purchase order(ME22n) that custom fields in COEP get updated with controlling document
and through BADI AC_DOCUMENT i m updating that custom field in COEP.
but when i do manual posting through FB50 controlling document is generated in COEP but i m not able to update that custom field
because in this case BADI AC_DOCUMENT is not get triggered.
is there any BADI or User exit or enhancement spot for FB50 through which i can update that custom field in table COEPHi Sandy,
Thanks for u r reply,
RFAVIS01 is not getting triggered through FB50
and F180A001 ( EXIT_SAPLF048_001) is getting triggered but it doesnt contain COEP field in its parameter
import - F180A_DOC_HEAD_TAB
F180A_DOC_ITEM_TAB
changing - RELATION_TAB
Maybe you are looking for
-
I've looked through the forums and see many people complaining about a lack of coverage and then a few customers replying by stating "you should have known within 14 days that you didn't have coverage. It's your fault you're stuck in the contract."
-
The problem of starting the tlisten
When I execute the command :tlisten -l 135.10.200.3:6001, I always get the message: CMDTUX_CAT:1319:INFO:Terminating tlisten process. even if I reboot the windows2000. What's the cause?
-
Calendar Server Migration from iplanet5.2 to Sunjava messaging server
Hi Can any one help me on Calendar server migration. How can i migrate the calendar server from iplanet 5.2 to sunjava messaging server Users Calendar resources Groups Attributes
-
Anyone using Intech Speedtools 3??
Speedtools is packaged with OWC drives. Can't find many reviews of it, and the company's website seems pretty dead ("Leopard is here!" is announced on the home page and the forum is down.) Anyone using and liking this utility?
-
Cannot connect essbase sever using Essbase administration service console
Hi: I installed Essbase 11.1.2.2 in my PC, but I cannot connect essbase server with the administration servise console. but I try to connect with ESSCMD.exe, everything is OK. could you pls help to advise how can I connect it ?