BADI OR User Exit for send mail when realize PO in me29n
Hi all,
i need some enhancement to send mail when we release PO in me29n.We have release strategy of some levels.When first level release PO i have to send mail to the higher level group.
I implement EXIT_SAPMM06E_013 but the program do not go there.
Do anyone know some other solution?!?
Thanks in advance.
Hi,
i have alredy implement EXIT_SAPMM06E_013 but the program do not stop there.Do i miss something?I activete the project and saw that EXIT_SAPMM06E_007 EXIT_SAPMM06E_013 and EXIT_SAPMM06E_016 are implemented and active.
Similar Messages
-
User exit for sending mail to customers
Hi all
I have a requirement where i need to trigger a mail to customer when the shipments are planned for the sales order.
I got a suggestion asking me to use user exits for this. I would like to know is there any user-exit for this. I came to know a user-exit exists to trigger mail when a purchase oreder is released. Is there any user-exit for triggering mail to customers once the shipmetns are planned for a sales oreder.check all exists with VA01
Transaction Code - VA01 Create Sales Order
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
No of Exits: 15
Reward points if useful......... -
Badi or User Exit to send Mail for Tcode IW31 and IW32
Hi All,
I have a requirement as follows:
In IW32, after entering an order number, if we change the user status (activating the user status) and press the SAVE button, a mail needs to be triggered
I have found a couple of user exits but I am unable to find one soon after the table updation. Another important thing to note is that if the user wants to deactivate the user status (i.e., when the user status is reverted back to the previous status) and saved, then this functionality should not be executed.
Kindly help me with the user exit or the enhancment or the BADI where I can implement this functionality.Hi,
Create a event driven function module, your function module will trigger based on the event. Configure that in the transaction SWETYPV..When ever the status is changed it will trigger a function module (Z function module) which inturn send a mail(IF you write the code)..
Use Business object - -
BUS2007
Use events:
MaintenanceOrder.released Order released
MaintenanceOrder.teccompleted Order technically completed
MaintenanceOrder.finconfirmed Order finally confirmed
MaintenanceOrder.completed Business completion for order
Regards, -
BAdI: or User Exit for Campaign Creation IN CRM 5.0
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshIN WHICH TRANSACTION U R CREATING CAMPAIGN ??
-
Hi Gurus,
I am looking for BADI's or User exits for transaction ME23n.
Exactly I am looking for BADI or user exit for the release strategy for the PO and then mailing it to th e apporover.
regards
kanishkadear ,
check out these two badi it may be useful for your requiremrnt
ME_RELEASE_CREATE
SMOD_MRFLB001
Cheers
fareed -
BAdI: or User Exit for Campaign Creation
Hi all,
we are working in CRM 5.0,
we have a Requirement like :
when we create the campaign it should check higher level project ID (marketing Plan ID)
if it is there it should permit for create campaign else it ll show error...
Any BAdI: or User Exit for Campaign Creation?
I ll geive reward points....
Rhanks & Regards,
GaneshDear Ganesh,
As campaign can be created and executed individually also, it will never check for higher level project ID.
Let me check the system if we can block creation of campaign individually, without having a higher level marketing plan. -
BADI or USER Exit for BP Adress check
Hi All ,
what is the badi or user exit for giving a additional check on Postal Codes when creating a BP ?
I have checked BUPA_ADDR_CHECK
BUPA_ADDR_EXPORT
BUPA_ADDR_IMPORT
BUPA_ADDR_UPDATE
BUPA_ADRREL_EXPORT
and the user exit ZXSZARU01
but when i am entering the postal code and pressing Enter , i am not able to catch the User/EXIt or badi .
Thanks for help.Hi
Use the BAdi : ADDRESS_CHECK
Implement the method: ADDRESS_POSTAL_CHECK
Once you enter the Post Code and Country on BP Txn, Pressing Enter will trigger this Badi for address check !
Good Luck !
Thanks
<b>Allot points if this helps !</b> -
BADI or User Exit for updating MSEG
Hi,
We are using ECC 6.0 and here is the scenario that we have to update custom fields into VBAP, LIPS and MSEG tables when these fields are entered on the sales order screen VA01,VA02.These field are added on this screen using Additional Data B screen.Also, These fields are there in VBAP and LIPS through Append Structure and MSEG through CI_COBL.Is there any BADI or USER EXIT for this.Thanks in Advance.
Priya.Hi
You can use exit ZXMBCU02 ( Function EXIT_SAPMM07M_001
in SAP enhancement MBCF0002 ). Here also whtever changes you make to I_MSEG will be lost as MSEG is an importing parameter. You can do something like this.
FIELD-SYMBOLS <F1> TYPE MSEG.
DATA NAME(50) VALUE '(SAPMM07M)MSEG'.
ASSIGN (NAME) TO <F1>.
<F1>-KOSTL = 'XXXX'.
( In above example MSEG-KOSTL will be set as XXXX, you can change any of MSEG fields in above way. ).
Cheers -
Badi or user exit for changing currency INR to EUR
hi friends,
in po header there is one tab called status.
in this tab there is one field called delivery payment
which has curr INR but i want to change that INR CuRR
to EUR.Can any one tell me how do this is there any badi or user exit
for this req.
thanks.Hi Sonu,
Use the following program to find out the appropriate user exist for ur transaction:
REPORT ZGURU_USER_EXIT_FIND .
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Then u can use the function CONVERT_TO_LOCAL_CURRENCY to change the amount from INR to EUR.
Regards,
Himanshu -
BADI or User Exit for Txn : CRMD_ORDER
Hi Experts,
Is there any badi or user-exits for the transaction crmd_order.
regrads,
arul jtohi aDear Arul Jothi,
BAPI_ACTIVITYCRM_CREATEMULTI
BAPI_BUSPROCESSND_CREATEMULTI
CRM_BUSPROCESSND_BAPI
CRM_LEADCRM_BAPI
BAPI_LEAD_CREATEMULTI
CRM_OPPORTUNITYCRM_BAPI
BAPI_OPPORTUNITY_CREATEMULTI
CRM_SLSTRANSACTCRM_BAPI
BAPI_SLSTRANSACT_CREATEMULTI
Also, visit the following thread:
Change status for sales order in crmd_order
BAdi/Enhancement:
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Regards,
Naveen. -
Badi or user exit for allocation run (Tcode-J3AT) on save button
hi friends,
i m searching for the BADI or user exit for the Tcode J3AT on the save button press. if u know any badi or user exit for same pls let me know.
thanks and regards,
vicky.solved with the help of SAP note.
-
BADI or USER EXIT for MIGO when changing order number
Hi experts, I'm looking for a BADI or USER EXIT in Tx. MIGO that is triggered after pushing ENTER when you change the order number. What I need to do is to propose the movement type depending on the order data. Thanks.
Not sure but you can try in BADi MB_DOCUMENT_BADI menthod:
MB_DOCUMENT_UPDATE -
Badi or User exit for CJ20N..Milestone date
HI...
I have to access the field of CJ20N fieldname (LST_ACTDT) (Milestone date).I have to send the alert mail using that value.
But i am unable to get the BADI or user exit to get that value.I am using the BADI WORKBREAKDOWN_UPDATE. But not reaching to solution.
Can anyone help me out..Hi Priyank,
Instead of that you can directly use the BAPI -BAPI_PROJECT_GETINFO
CALL FUNCTION 'BAPI_PROJECT_GETINFO'
EXPORTING
PROJECT_DEFINITION =
WITH_ACTIVITIES = 'X'
WITH_MILESTONES = 'X'
WITH_SUBTREE = 'X'
IMPORTING
E_PROJECT_DEFINITION =
RETURN =
TABLES
I_WBS_ELEMENT_TABLE = " send the pspnr value by appending in the table i.e. IT_WBS_ELEMENT-PSPNR
E_WBS_ELEMENT_TABLE =
E_WBS_MILESTONE_TABLE = "catch this in a internal table
E_WBS_HIERARCHIE_TABLE =
E_ACTIVITY_TABLE =
E_MESSAGE_TABLE =
If u wish to have details of wbs only..by entering WBS ELEMENT in I_WBS_ELEMENT_TABLE u have to give
WITH_ACTIVITIES X
WITH_MILESTONES X
WITH_SUBTREE X
then only u will get deatils of corresponding wbs via bapi BAPI_PROJECT_GETINFO.
In the milestone internal table you will have all the dates.
Please refer to the function module documentation for further details. -
BADI or User exit for FB50 to update custom field in table COEP
Hi all,
i have added one custom field in table COEP through include CI_COBL .
when i do posting through sales order(VA02) or purchase order(ME22n) that custom fields in COEP get updated with controlling document
and through BADI AC_DOCUMENT i m updating that custom field in COEP.
but when i do manual posting through FB50 controlling document is generated in COEP but i m not able to update that custom field
because in this case BADI AC_DOCUMENT is not get triggered.
is there any BADI or User exit or enhancement spot for FB50 through which i can update that custom field in table COEPHi Sandy,
Thanks for u r reply,
RFAVIS01 is not getting triggered through FB50
and F180A001 ( EXIT_SAPLF048_001) is getting triggered but it doesnt contain COEP field in its parameter
import - F180A_DOC_HEAD_TAB
F180A_DOC_ITEM_TAB
changing - RELATION_TAB -
Badi or user exit for FTR_CREATE for modifying the Payment Details
Hi,
I need a Badi or user exit that will modify the internal table for the "Payment Details" in transaction FTR_CREATE. Basically, instead of using the default entries in the "Payment Details", data from a Z custom table will overwrite the "Payment details" or the internal table containing the "Payment details". This should create entries in the Transparent Table VTBZV with the values fron the Z custom table.
I'm trying to implement the BADI FTR_TR_GENERIC but I cannot find where and how to modify the original "Payment Details" entries. Or if its even possible to do this.Hi Ravi,
I was trying to do that but I am not sure were to start. I tried to modify the contents of PI_PROXY_TRANSACTION->A_TAB_CASHFLOW using MODIFY <itab> but an error occured when I tried to activate it saying that the Class/Interdace Attribute is read-only and cannot be modified. Is there a Method that I need to do in order to modify the Attribute? (I'm not that familiar yet with Classes and Methods though)
Also, just to test, I manually changed the contents of two internal tables containing the "Payment Details" data during debug mode. But after the program has ended its run and finally saved the data, the Table VTBZV was not updated with the manual data I introduced. So I'm not sure if the Badi FTR_TR_GENERIC (which is I'm implementing) really allows the "Payment Details" to be modified or if I'm modifying the correct internal table(s).
Maybe you are looking for
-
My flash no longer works, the flash light does not work it is an iphone 5 about 15 months old
My iphone 5 is a little over a year old, seems like after the update to IO7 the flash quit working as did the flashlight that comes with IO7. i have done the soft start, hard start, Reset and now the complete restore. any ideas? Thank You
-
Inserting an hyperlink towards a (Mathematica) document in Keynote
Hi, hyperlinks seem to be restricted in Keynote. I want to add an hyperlink to an image (which I know how to do) towards a different document (a Mathematica demo). Since it is not a webpage nor another Keynote document nor a Quicktime, it seems impos
-
Different views on computer and display
Is it possible to watch a slideshow in presenter view on my laptop while the slide is being presented normally on a projector or display - like you can with Powerpoint?
-
How can i input a video into a powerpoint?
I need to know if its possible to import a tv show into a powerpoint?
-
Access Denied when report is opened
Adobe Acrobat Reader v 10.0 release 1. We have an app that creates PDF reports. The PDF is throwing "Access Denied" message when the report is opened. Sometimes it works, other times the message is generated. Any ideas?