BADI QEC_RESULT_COPY can not be implemented
Hi, I am trying to implement this BADI QEC_RESULT_COPY but a error message appears with the text 'BADI definition QEC_RESULT_COPYis only provided for SAP internal use' and this is asking for a 'Access key'. Can you tell me what should i do in order to implement this BADI?
Thank you in advance!
Hi sudheer Addepalli,
I supose that i tried to create it in the right way, i followed this steps.
1. In se18 i filled the badi name and pressed 'change' button.
2. In menu 'Implementation' i select 'create' option.
3. The error appears...i spected that a popup window appears to input the Z name for the implementation.
Is it right? or is another way to implement the badi?
Thank you very much.
Similar Messages
-
hello my name is Yasser Prnak.Email'm from Iran and I want to know What did a bad job Can not Create an Apple ID? Only Because It was born in Iran? Please create one Apple ID fir me because I'm in Iran Born
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
SAP Note 1079446 can not be implemented
Hello Gurus,
Can anyone please suggest how to implement note 1079446 in BI7.
When trying to do this through SNOTE transaction its showing message "SAP Note does not contain valid correction instructions". Help will be rewarded with points !!!
Regards,
CNNHi CSM,
My BI Component details are as follows :
Component :
SAP_BW , SAP_BASIS
Release :
700 , 700
Level :
0015 , 0013
Highest Support Package :
SAPKW70015 , SAPKB70013
Could you please tell me the steps you followed to do this ?
Thanks,
CNN -
I can not register my implementation via oohap_basic
Hi,
i have a trouble. I made my badi and gave it a filter.
When i try to register the implementation via oohap_basic, i can not because the system says that my filter is not in the table T77HAP_FLT_EXI.
Infact my badi is HRHAP00_GET_LIST_FLT and its filter is HAP_FLT_VAL_GET_LIST_FLT and when i save my badi ZHR_GET_LIST_FLT that use the same filter the system save data into another table:
T77HAP_FLT_GLF and in oohap_basic this table is not used.
Could you help me?
thanks in advance.Find your serial number quickly
-
My hard drive went bad and I lost a lot of purchased items from the iTunes store. I want to re-download them but can not. They still show up on my purchased items. How do I solve this?
Update to iTunes 10.3.1
After you have finished, you can re download your iTunes purchases without having to re purchase.
iTunes 10.3.1
" Download Previous Purchases. Download your past music purchases again at no additional cost. Your purchases are available in the iTunes Store on your Mac or in the iTunes app on your iPhone, iPad, or iPod touch. Previous purchases may be unavailable if they are no longer on the iTunes Store."
"Available on iTunes in the U.S. and Canada only. Title availability is subject to change."
From here. http://www.apple.com/itunes/ -
I have an iMac model 4,1 running OSX 10.6.8. The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject. I have asked about this before and tried all all the suggestions I have received but I can not eject.
Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem. I still can not eject. When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
How do I solve this problem?Hi again Hal
Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
You have also tried resetting the PRAM as I suggestion in your other thread...?
See resetting the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys. -
SAP Notes status can't be implemented?
Hi All
I would like to know, why few SAP notes status can't be implemented.
your view will be appreciated and will rewarded with <<removed by moderator>>.
Regards
Madhavi
Edited by: kishan P on Sep 1, 2010 1:03 PMHI
Some SAP note can be implement manually and some are can be implement through the T-Code SNOTE
once you go to the look at the sap note it provide the instruct how to implement ,
when you go to SNOTE T-code in the GOTO> DOWNLOAD SAP NOTE once u click it you have to download SAP note direcly in to SNOTE and you can directly implement .
if its not downloading to this place you have to do it manually from taking the access key from SAP .
Regard
nawa -
i have had bad luck with computers laitly and have 5 pc allready authorised now i have a new one i cant authorise it so i can not access my itunes account can u deauthroise my pc from my accont so i can access it again
<Email Edited by Host>http://support.apple.com/kb/HT1420
-
Activity implementer can not edit Manual activity content
user role activity implementer can not edit Manual activity content assigned to him
just he can mark complete or mark as faild
what is required to give user permission to edit Manual activity ?
Ahmedattached user role tasks assigned, still can not edit Manual activity assigned to him
Ahmed -
I have Vista for an OS, I was running Foxfire 3.4 when it started to freeze after opening the internet the first time and forced me to open the internet again to have function. The first one could not be interacted with at all, not even to close it.
I loaded Foxfire 4 and now can not even understand the layout. Nothing makes any sense at all. Where are all the normal features? Where do my open in new tab s go and how the hell do I get to them? I am too frustrated to even accept the new interface. I want the old interface back.There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them: -
Slave instance can not synchronized with the master for a long time
Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170 Number of PERM messages not acknowledged
9245 Number of messages queued due to network delay
172415 Number of messages discarded due to queue length
25880 Number of existing connections dropped
3407 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994 Next LSN to be used
0/0 Not waiting for any missed log records
328872/466092 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
2323 Number of duplicate log records received
0 Number of log records currently queued
6768 Maximum number of log records ever queued at once
55284 Total number of log records queued
120M Number of log records received and appended to the log (120475988)
111 Number of log records missed and requested
2147M Current master ID (2147483647)
2 Number of times the master has changed
0 Number of messages received with a bad generation number
8505306 Number of messages received and processed
12 Number of messages ignored due to pending recovery
471869 Number of failed message sends
12M Number of messages sent (12959945)
0 Number of new site messages received
1 Number of environments believed to be in the replication group
990543 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup complete
6244678 Number of transactions applied
0 Number of startsync messages delayed
1 Number of elections held
1 Number of elections won
No election in progress
0.057097 Duration of last election (seconds)
8944103 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
5273M Number of records added to a bulk buffer (5273592170)
10M Number of bulk buffers sent (10490865)
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
slave db_stat:
0 Number of PERM messages not acknowledged
0 Number of messages queued due to network delay
0 Number of messages discarded due to queue length
1454 Number of existing connections dropped
0 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048 Next LSN expected
330433/2013808 LSN of first log record we have after missed log records
329543/5500501 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
5256M Number of duplicate log records received (5256599432)
3925284 Number of log records currently queued
3925285 Maximum number of log records ever queued at once
4880561 Total number of log records queued
3578038 Number of log records received and appended to the log
1912297 Number of log records missed and requested
0 Current master ID
1 Number of times the master has changed
0 Number of messages received with a bad generation number
12M Number of messages received and processed (12980442)
2 Number of messages ignored due to pending recovery
0 Number of failed message sends
1912307 Number of messages sent
0 Number of new site messages received
0 Number of environments believed to be in the replication group
0 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup incomplete
110568 Number of transactions applied
80 Number of startsync messages delayed
0 Number of elections held
0 Number of elections won
No election in progress
0 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
0 Number of records added to a bulk buffer
0 Number of bulk buffers sent
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike -
Filter for BAdi CRM_ORDER_STATUS does not work in WebUI
Hello,
we have made an implementation for BAdi CRM_ORDER_STATUS for our sales cycle.
In detail:
The BAdi implementation shall be triggered if the user sets a special user status within an opportunity.
Therefor we have used the standard filter functionality provided by this BAdi (giving the correct header status profile and user status).
Using transaction CRMD_ORDER in SAP GUI, creating an opportunity and setting the special user status -> the BAdi implementation is triggered as expected.
But: If we are using the WebUI the done BAdi implementation is triggered at every roundrip caused by creating/editing an opportunity and not only at setting the user status.
Does anybody of you made similar experiences with using BAdis in WebUI (SAP CRM 7.0)?
Cheers,
André
**EDIT***
It´s possible coding the filter within the BAdi implementation.
But we prefer using the provided SAP standard.
Edited by: Andre Schillack on Apr 23, 2009 8:47 PMHi Andre,
I just checked my system CRM2007 and below is what I found in WebUI mode:
During the build of DDLB for Status field, it calls method cl_crm_uiu_status_info=>get_status_info. What it does is:
1. It derives all status codes for the user status profile (based on customizing)
2. And then for each status code, it triggers the BADI based on filter value. In the BADI, customer can decide whether the particular status (filtered value) is allowed to see in the DDLB.
Since it is building the DDLB for Status field every time there is change on the opportunity and therefore DDLB method calls the BADI every time to build the Status code list.
If you want to do further processing based on status change in the method BEFORE_CHANGE, you can try the following code.
if is_status_wrk-active_old = 'X' and
is_status_wrk-user_stat_proc = 'CRMACTIV' and
is_status_wrk-status = 'E0002'.
Do something
endif.
I hope I have not confused you.
I feel that this is standard behaviour in WebUI. You may want to check with SAP OSS also.
Regards,
Paparao Undavali -
BADI "EXIT_SAPLFMWR_002" is not working
Hi All,
We have upgraded from 4.6C to 6.0 and
BADI "EXIT_SAPLFMWR_002" is not working . please suggest some solution for this.Look at OSS <a href="https://service.sap.com/sap/support/notes/834826">Note 834826 - Replacement for customer enhancement SAPLFMWR 002</a>
<b>
Symptom</b>
After the upgrade to SAP_APPL 4.70, the CMOD-exit EXIT_SAPLFMWR_002 for the derivation of the commitment item from the current G/L account does not work anymore.
<b>
Solution</b>
Do not activate the EA-PS enhancement or the Funds Management, but go to the general exit instead, in other words: Transfer the function to a separate implementation of the BADI 'TR_GET_ACCNT_ASSIGN' (Transaction SE19).
You can find example code for the implementation of the strict derivation logic in the source code of the method GET_ACCNT_ASSIGN below. If you already have a BADI implementation with a separate logic (for example, from the migration of the exit EXIT_SAPLFMCH_001) the specified logic should be prepended to your own logic.
Regards -
BADI ME_PROCESS_PO_CUST is not triggering while creating/changing PO
Hi,
I am new to BADIs,
I am trying to implement BADI ME_PROCESS_PO_CUST in ECC 6.0. I have done the implementation and activated. I kept a break point in PROCESS_ITEM method, but the BADI is not triggering while creating or changing the PO. Please advice me what could be the reason behind this?
I used the SQL trace but i couldn't get the BADI ME_PROCESS_PO_CUST in the list.
thanks in advance
Regards
Jagadishhello jagdish,
implement this user exit.....
MM06E005...
go to EXIT_SAPMM06E_017 in that then you can put a break point in the user defined function module.....
or use
BREAK 'C5133392' (use your user in place of C5133392)....it will stop here while creating PO or changing PO...
now you can do whatever you want to do in create or change PO using this function exit......
perform the validations on import parameters.....to create or change ....and activate the project....
hope this will give you some idea and help -
BADI "COPCMESSAGECONTROL" , only one active implementation ?
Hi,
I'd like to do a custom implementation of the BADI "COPCMESSAGECONTROL", eg
"Z_COPCMESSAGECONTROL".
For this BADI there's a SAP hint, that only one active implementation is allowed.
Cause in our system there's already an active SAP implementation "/CWM/MESSAGE_CK" I don't know,
if I can activate my custom "Z_COPCMESSAGECONTROL" implementation in addition to the SAP implementation.
Any Ideas ? Many thanks in advance !
Regards
OlafIf you look at the BADI definition in SE18, you'll find that the 'multiple use' flag is NOT set meaning by default this BADI can only be implemented once.
Therefore if you need to add custom coding to this BADI implementation either you add it to the implemented methods (modification) or you deactivate the standard BADI and implement your own BADI by copying the standard coding and adding yours to it (also a modification, but you would have your coding in a Z-class).
However whenever you copy standard SAP code into a custom peogram or class any notes that SAP releases which makes changes to that BADI implementation will not be applied to your Z-copy!
Hope that helps,
Michael
Maybe you are looking for
-
I can't access my gift card though the account balance is shown in window when I sign in to I store. When I try to purchase a song, site requests me to sign in for billing information. When I do this, it just keeps replacing the same window with sa
-
Using docs created w/ different wordpro program
Is it possible for Pages to read docs I created on my old iMac using Appleworks? Is there a way to transfer these files from a cd to my newer computer so I can print/revise/edit these docs in Pages or do I need a different wordprocessing program?
-
Possible bug report: "username in use" error not returned
When I was creating this account, I got stuck at the page that creates a forum ID to be linked to my Apple ID. I would enter my information, check the user agreement box, then hit submit... and the page would reload, having lost data in two fields (c
-
hi Can anyone help me. When i delete a message in outlook the message dose not go into my Deleted Messages folder, why?????
-
This is not a flash lite question but still content related. I have been researching about device customization but I am having a hard time trying to distinguish between the content that can be personalized by a device (independently from the carrier