BAdI SMOD_RSR00004 for Jump from BW Query to R/3 transaction

Hi,
I have to create a jump query to an R/3 transaction. The I/O 'Object key' in the BW corresponds to the r/3 field OBJKY of the NAST table. After trying out all the possibilities/ assignments in RSBBS(BW) also its not working.
Can anybody pls guide me how to implement BADI for this type jump query(RRI for Transaction).
Thanks in Advance,
Sandy.

Hi Gurus, Any help on this pls...

Similar Messages

BAdI SMOD_RSR00004 for Jump Query

Hi,
I have to create a jump query to an R/3 transaction. The I/O 'Object key' in the BW corresponds to the r/3 field OBJKY of the NAST table. After trying out all the possibilities/ assignments in RSBBS also its not working.
Can anybody pls guide me how to implement BADI for this jump query(RRI for Transaction).
Thanks in Advance,
Sandy.

Hi Sandy,
What is the problem you are experiencing exactly?
What I had to do was in the Assignment Details choose Type "3 Table Field" for the infoobject in the query you want to pass to the transaction then fill in the field name for the source table and the fields data element and domain values.
You will also need authorisation to transaction RSRR_WEB in the source for this to work.
Hope this helps.
Cheers
Craig

Jump from bex Query to cprojects application

Dear
I'm facing following problem.
We would like to jump from a Bex Query to a Cprojects application.
In our Query the project ID is our infoobject that we want to use as key field in RSBBS but the destination is a Cproject application (Web portal) .
I've received an URL where the application is stored but it seems that the Cproject application can't be called from BEX.
Any help is appreciated

hello,
have you verified that the source system has its ITS functioning, the RFC and logical systems defined.
Make sure the source ITS name is maintained in the RSBBS_RSRR_URL or TWPURLSVR table.
The OSS note 771351 gives details about the details for the configuration.
Regards,
Dhanya.

Alternative for result from other query and merge dimension option option

Hi Everyone ,
Am Developing one webi report over bex Query.
Actual scenario is output of one webi report should be the input of other webi report.
Eg:
Table 1
2010        Cus 1
2010        Cus 2
2011        Cus 3
table 2
cus1    m1   100
cus2    m2   200
Cus3    m1 400
Report 1 designing
First report created using table 1 and prompt for year
Report 2 designing
Second report created using table2 and prompt for customer
So when am Running first report it will ask for parameter year and if am selecting 2010 then the report will return C1 and C2
this out put should e the input for report 2.
So out put will be 100+200=300
NOTE:1. Result from other query is not working in webi filter pane since am building on olap universe.
           2. Merge Dimension performance is very slow .
Any Solution ?
Regards,
Kannan.B

Hi,
Thanks for ur reply
As you said , If am giving hyperlink to other report .
Eg: User selected Tamilnadu then report 1 opened then he has to click the some cell or hyperlink cell to view the actual report(2nd report).
Suppose user Clicked that hyperlink cell and 2nd report opened and he is viewing the data for Tamil nadu and he decided to see the report for
Andrapradesh so according to this logic he has to select first report and refresh the data for Andra and from there he has to come to 2nd report.
totally 4 screen will be opened for seeing the two states report.
So Some other alternative.......

Query Jump from Bex Analyzer to r/3 transactions: error of web server

Hello,
I have created a query jump in the RSBBS transaction to go in R/3 through a Bex Query. When i choose the jump in the query anayzer I have the error message:
<b>No Web server maintained for the presentation of log. system.</b>
Do you have ever had this message? what is the solution? why do my bex anayzer use a web interface to connect in R/3?
Thanks a lot!
Julien

Hi
this may be possible by using an openDocument URL.
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf
Still you have to configure the auhtentication connectivity between BOBJ and SAP Backend in the BOBJ CMC console.
And setup the SSO option in the database configuration panel of your CR reports (this has also to be done in the CMC, just go to Folders, navigate to your report and invoke the context menu. You have to scroll to the the bottom of the panel in order to find the SSP option)
Regards,
Stratos

Assigments to jump from BW-query to BP transaction

Hello,
I would like to know what assigments I should do in RSSB transaction to be able to jump from a BW query to BP transaction (CRM).
Thanks in advance.
Carmen

Hi,
The transaction code is RSBBS.Here you have to set the source query and the source target. and set the target to your BP transaction(CRM). The parameters depend on the way you want to have your jump.
Hope this helps.
Assign points if useful.
Regards,
Kiran

Link for jumping from a JSP Appl. with a button to an external Web-Side

Hi,
I'm searching for the solution to create a button where I can jump to an external Web-Side! What I have to do for that in JSF????
Regards Ingo

Good to know that you're fine...
For me all go well too.
I'm now in charge of loading the datawarehouse on my society...
And like a lot of others projects come on my hands I have to keep an eye on new technologies (like web service now).
Still not tested ODI 11g, and I have to say that I'm a bit cold on migrating all my projects on the new version...
Did you encountered issue when passing form ODI 10 to 11 ?
I'm a bit curious knowing new features of this first Oracle version....
Looking forward to reading from you
Brice

HP Officejet Pro 8600, bad size for print from Corel suite product

When i try to print a work with Corel Photo-Paint, or Corel Draw, I can't print to the same dimension that I see on the print preview of the program. For example if I want to print a photo in A4 format, the printer get out a sheet with a full print of a porzion of the photo as if the sheet dosen't match.
But in the print setup of Corel, for the page orientament I have "Use printer default", and for the dimension there isn't anything, but with my previous printer, this paremeter get out from the printer driver.
Please help me, because I work much with this two program, If I can't print I have to change the printer with other one!!
Thank
This question was solved.
View Solution.

Hello Lucatek2
What operating system are you running? Under printer preferences what paper type and paper size do you have set? In printer preferences -> advanced options is borderless printing enabled? Also what model of the Officejet Pro 8600 do you have? Example: N911a.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

RSBBS: Jump From BW Query to SAP Query

Hi
I have a cost center analysis report in BW which has an option to jump to R/3. When I type the transaction RSBBS and give the name of the query, the Receiver application is 'QU' (Sap Query) and the receiver object is 'GZ_BW_INTGRTYZISQ_CCA_Q01' which I am presuming is the query to which the Cost Center analysis report in BW is jumping to.
How do I view this SAP query and if necessary change it. I have tried tcodes SQ01, SQ02, SQ03 and none of these recognise the above mentioned receiver object
Kindly advise.
Regards
Sheily

the best way to figure out is to ask ur functional guy the Tcode to get there. it could be anything.

Jump from query

HI Gurus,
I have to develope a query where i have to jump from BI query to ECC. In my report There are two fields one is account and another is account number. If i click on the document number i have to go to an ECC transaction diplaying data about that document and if i click on the account i have to go to another ECC transaction displaying data about account. I know that we can jump from BI query to transaction, but is it possible to jump from one query to 2 different transaction? if so how to do it?
Regards,
Raghavendra.

Hi Raghavendra,
In the RSBBS t-code, give the sendor reprot name then click on create button.
Then select transaction and sourcesystem and then the T-code you need to enter.
Then after save the setting. goto Assignment details. Click on the field for which you need to assign that transcation.
Then create another one and select transaction .. provide the details as above and in assignment provide the details.
Ex: for G/l account you can assign the FS03n T-code on r/3.
for cost center you can assign the KS03 t-code on r/3.
Hope it helps...
Regards,
Ravi Kanth

JUMP (RSBBS) from a query on a transaction(local)

Hi,
Can You help me ?
I want to do a jump from a query on a transaction RSDMD (on local system).But particullary, I want to put in parameter the data (doc number) with wich I jumped.
So How I have to define the assignement detail in RSBBS for the transaction RSDMD?
Because, for the moment I have a popup where I must fill the name of my charactéristic and after the number of my doc number (for example), and it's with the doc number that I do my jump.
But, I don't want to fill characteristic and doc number, I want that it's automaticaly...
Thank you for your help...
Carine.

Calling the RRI with a transaction or an ABAP/4 Report as the receiver is done with the RRI
from the SAP NetWeaver Application Server. This is possible in an ERP system, a CRM
system or within the BI system. The selections are prepared by the BI system that does not
recognize the transaction or the report. The assignment is transferred from the RRI of the
SAP NetWeaver Application Server using inverse transformation rules. There must also be a
complete chain from the DataSource of the source system to the InfoSource, through
transformations up to the InfoProvider. This does not mean that data absolutely has to be
loaded using this chain. If this chain does not exist, the RRI cannot transfer the selections to
the source system. Calling the RRI only works for fields with dictionary reference. For ABAP reports, this means that the parameter has to be PARAMETERS param LIKE <table_field>
For transactions, this means that the Dynpro has to have a dictionary reference. Not every
transaction can be called with the RRI of the SAP Application Server.
These are the steps to do this
If you want to jump from a Web application to a transaction or ABAP/4 report using the
RRI, an ITS for the target system has to be assigned beforehand.
● The value of the input field to be supplied must be known at the time of the jump (for
example by entering a single value on the selection screen of the sender or by the
cursor position at the time of the jump).
● Sender and receiver fields that correspond to one another generally must link to the
same data element or at least to the same domain, otherwise the values cannot be
assigned to one another.
● The assignment of sender and receiver fields must always be a 1:1 assignment. For
example, the transactions called from the start screen cannot have two input fields of
the same data type. Then it is not clear which of the fields is to be supplied, which
means neither of them is supplied.
● There has to be a complete chain from the DataSource of the source system to the
InfoSource, through update rules up to the target.
Proceed as follows after you have created the sender-receiver assignment as described
above.
1. As the type, choose Table Field. The columns Field Name, Data Element, Domain and
Set-/Get Parameter become input ready.
2. Specify the field name, data element, domain and parameter ID for the receiver
transaction. You need to know this information because input help is not available. You
can usually find the parameter ID in the ABAP dictionary entry for the data element.
If this does not always make jumping to the transaction possible, it may be necessary to
program a short ABAP start program. For more information on how to do this, see SAP Note
number 383077

Problem in query jump from one sender and two receivers

Hello all,
My requirement is to jump from one query to another two queries. The sender comes from infoCube A and receivers comes from ODS B and ODS C (ODS C is a copy of ODS B). The problem is that when I execute the first jump a pop up appears with a selection date. This issue does not happen when I execute the second jump (and the selection date is needed). Target queries are identical, and I don´t know what is happening.
Any ideas?
Thanks in advance.
Carmen

Hi Carmen,
I think you have used the same variable for the day selection for the query on ODS C and ODS B. Hence when you fill it for the first time it does not ask you at the second instance.
Regards.

New browser window for Jump Query

Hi SAPGuru,
     I have main Query with three jumps Query (QA, QB, QC). I created web template with main query and three other web templates for jump query. All are working fine. When I am running main query template and trying to jump from main query to QA web template. Its open a new browse window thats fine. So now I have total two browsers are open. Now when I try to jump from main query to QB that web template is showing in the browser window which is shown by QA. Means its overwrite QA query with QB query in browser.
     I need to open a new browser window when I jump from main query to child query. In short I like to open one browser for main query and three another browsers (QA, QB, QC) to jump query so, I can compare all query with different browser window.
         Am I missing something in web template side or IEs option side?
         Thanks in advance...

Check the RRI_DISPLAY_TARGET property of the web template. make sure you do not have this set to open in the QA window.
Thanks.

From Clause query with form variables

forms 9.0.4 rdbms 9.2
Is it possible to create a From Clause query with form variables generated from another block (but in the same form)? I am not having any success.
I searched Metalink. It appears that according to DOC ID # 69884.1, in Forms 6i, this is not possible. Metalink suggest in DOC ID 104771.1 implementating a dynamic From Clause, but when I duplicate the example on my system, I receive an Oracle error. Further investigation from the web form (DISPLAY ERROR) indicates that the system does not see the dynamic value.
Has anyone else run into this error? Has this been fixed in forms 9.0.4 and I am just missing something? Does a dynamic from clause query work? Can anyone point me to an example or post an example or offer any advise.
thanks in advance

As far as I know it is not possible to use block items in a from clause query in forms 9.0.4. Here is my solution for a From-Clause-Query via the 'Query-Data-Source-Name-Property':
To use the values of the block items in my from clause query I implemented a database package with getter and setter routines for the block item values I needed for the query.
In the Key-Exeqry-Trigger of the From-Clause-Query-Block I set the global package variables with values of the block-items I am interested in. In the From-Clause-Query I used the values in the where-clause via package functions which return the global package variables.
Hope my solution will work for your problem.

Query on results from another query

Post Author: Duncan1980
CA Forum: Crystal Reports
Is it possible to query on the results from another query. I have a query that produces a list of document numbers. I want to use the output from that query as the filter criteria in a another query in the same Universe.
The output from the first query can be as much as 2000, so it would be very time consuming to cut and paste these into a filter.
Both reports are built, but can not figure out how to link the first report output to the filtering criteria on the second report. I
I am using business objects XI release 2 web intelligence 11.5.3.417 enterprise.

Hi Vivek,
It was not directly solved but I applied alternate logic to over come the issue.
Here's what I did to overcome:
I used a sub query in place of the whole result from another query.
For Ex:
Dim1 inlist result from another query1
I made it as
Dim1 inlist (Dim0)
where Conditions.
Here Dim0 is the object which we use for Result from another query and Conditions will be the necessary filter conditions to arrive proper Dim0. Make sure proper context is formed for the sub query.
Even though it resolved my problem, It introduces an new issue. It causes increase in query run time when huge set of data is returned from sub query.
Please let me know if i haven't explained clearly.
Hi Aris_BO,
Sorry for not responding earlier. The logic would probably make more queries null & not null. Thats why I was not advised to use it.
Thanks
LN

BAdI SMOD_RSR00004 for Jump from BW Query to R/3 transaction

Similar Messages

Maybe you are looking for