BADI/user exit for ME21N - Warning message for "our reference" field

Dear all,
I have a problem.
In ME21N, I need to show a warning message (message w... ) when user enter an already-used-before input in "Our reference' field (EKKO-UNSEZ).
I've tried in two methods.
1. Using fm EXIT_SAPMM06E_004. But it can only works for Error message. My warning message never shows up.
2. Tried to implement classic BADI ME_PROCESS_PO_CUST, using the PROCESS_HEADER method. Got the break-point spot on, but still didn't show the warning message.
Why is my warning message always got override?
Please advise.
Thanks in advance
Ahmad

Hi Ahmad,
Check the below links:
Unable to put Warning messages in ME21N and ME22N in Exit / BAdI in ECC 6.0
Warning message in me22n check user-exit can't process?
Custome warning message in T. code me51n me52n & me21n , me22n
Regards,
Nisha Vengal.

Similar Messages

BADI-User exit required for updating Purchase order header field -IHREZ

Hello All,
We have requirement in our business to update the purchase order header field "our reference" EKKO-IHREZ with some text field. We need a BADI/user exit that can be used for updating this field . We have checked the BADI ME_PROCESS_PO_CUST and unfortunately we are not able to use this BADI as it getting triggered in enjoy SAP transactions ME21N , ME22N etc. We are not creating the purchase order manually and we are using ME59N for creating Purchase order . Hence we are looking for some user exit/BADI that can be used in ME59N for updating the purchase order header field IHREZ.
Thanks in advance for your immediate response .
With regards,
Joseph Anand B

TRY using the exist u2022 EXIT_SAPLME59_001
You can also later on add this field by BAPI_PO_CHANGE

BADI / User exit for Purchase order(ME21N) after saving the document

Hi expert,
I need the BADI / User exit for Purchase order(ME21N) after saving the document
This is for email sending after create the purchase order so PO document number will be the import parameter
pls help me
point will be reward
Regards,
Ganesh

Hi Ganesh,
Could you please share your solution?
Thanks.
Hoops
Edited by: Hoops on Jun 13, 2011 10:51 PM

BADI/User Exit suggestion - for determining Partner in PO header

Hi All,
I want to be able to automatically populate and determine a manual partner function within the header of a purchase order creation.
Example, when PO is allocated against account assignment 'P' then go to the WBS element assigned and retrieve the specific partner number for partner function type XX. Then populate this into the relevant header partner function of the PO.
Any ideas of which BADI/User exit could be used in ME21N?
Thanks
Steve

Hi Steve
Before going to search the UserExit/BADI, please remember your account assignment will be at item level and the partner will be at Header level.If you have number of line items with different account asssginments or different WBS elements under account assignment P, it is difficult to determine the partner functional at Header level.Please think on how can you build logic? There are number of BADI/Exits available for Purchase order.
Regards
Ramakrishna

BADI/ User Exit for transaction FTR_EDIT/FTR_CREATE initial screen

Hi All,
I want a BADI/User Exit for FTR_EDIT/FTR_CREATE transactions to validate company code and partner fields.
please provide your suggestions.

Hi,
here is a coding example that I implemented in the BAdI FTR_TR_GENERIC. This coding is executed when the user press the check button. The method is EVT_TRANSACTION_CHECK. This example is checking the payment date dfaell if it is equal to the system date. If not then a message is sent to the message handler. Here is the code:
DATA: faelligkeit TYPE d,
        faelligkeit_text type c length 10,
        meldungstext TYPE c LENGTH 100.
FIELD-SYMBOLS: <it_source> LIKE LINE OF pi_proxy_transaction->a_tab_conditions.
IF sy-uname = 'XYZ'.
*    BREAK-POINT.
    READ TABLE pi_proxy_transaction->a_tab_conditions INDEX 1
      ASSIGNING <it_source>.
    faelligkeit = <it_source>-dfaell.
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
       EXPORTING
         DATE_INTERNAL                  = faelligkeit
       IMPORTING
         DATE_EXTERNAL                  = faelligkeit_text
       EXCEPTIONS
         DATE_INTERNAL_IS_INVALID       = 1
         OTHERS                         = 2
    IF sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF faelligkeit <> sy-datum.
      CONCATENATE 'Fälligkeit' faelligkeit_text 'incorrect' INTO meldungstext separated by space.
      CALL METHOD pi_proxy_messages->set_message
        EXPORTING
          pi_message_id       = 'T0'
          pi_message_number   = '101'
          pi_message_severity = 'E'
          pi_message_var1     = meldungstext
        EXCEPTIONS
          OTHERS              = 4.
    ENDIF.
ENDIF.
It is not a really nice coding but it shows in a simple way how to use the BAdI.
Regards
Robert

BADI/ User Exit for transaction FTR_EDIT/FTR_CREATE

Hi All,
I want a BADI/User Exit for FTR_EDIT/FTR_CREATE transactions to validate company code and partner fields.

Hi,
here is a coding example that I implemented in the BAdI FTR_TR_GENERIC. This coding is executed when the user press the check button. The method is EVT_TRANSACTION_CHECK. This example is checking the payment date dfaell if it is equal to the system date. If not then a message is sent to the message handler. Here is the code:
DATA: faelligkeit TYPE d,
        faelligkeit_text type c length 10,
        meldungstext TYPE c LENGTH 100.
FIELD-SYMBOLS: <it_source> LIKE LINE OF pi_proxy_transaction->a_tab_conditions.
IF sy-uname = 'XYZ'.
*    BREAK-POINT.
    READ TABLE pi_proxy_transaction->a_tab_conditions INDEX 1
      ASSIGNING <it_source>.
    faelligkeit = <it_source>-dfaell.
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
       EXPORTING
         DATE_INTERNAL                  = faelligkeit
       IMPORTING
         DATE_EXTERNAL                  = faelligkeit_text
       EXCEPTIONS
         DATE_INTERNAL_IS_INVALID       = 1
         OTHERS                         = 2
    IF sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF faelligkeit <> sy-datum.
      CONCATENATE 'Fälligkeit' faelligkeit_text 'incorrect' INTO meldungstext separated by space.
      CALL METHOD pi_proxy_messages->set_message
        EXPORTING
          pi_message_id       = 'T0'
          pi_message_number   = '101'
          pi_message_severity = 'E'
          pi_message_var1     = meldungstext
        EXCEPTIONS
          OTHERS              = 4.
    ENDIF.
ENDIF.
It is not a really nice coding but it shows in a simple way how to use the BAdI.
Regards
Robert

BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N

Hi,
I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
Please could anyone help me with this .
Regards,
Sushanth H.S.

Hi!
User Exits in Transportation
In Transportation, there are enhancements that you can use with transaction CMOD.
For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
Business Add-Ins in the transports
Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
Customer-specific functions can be executed before the save time and after the database update.
The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
IN_UPDATE: BADI is called up after the database update.
Standard Settings
Creating a BADI method:
Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
Afterwards, go to the heading and activate the interface.
Regards
Tamá

BADI/user exit for transcation code "BP" in CRM

Hi Experts,
Is there a BADI / user exit that is triggered after successful saving/updating of Business Partner using transaction code "BP"?
We want to send general infos such as partner number, Name, Birth date, etc. about the business partner being created/updated using IDoc.
We are using CRM WinClient 4.0.
If you know the steps on how this requirement will be done, kindly post them.
Thank you very much.

I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure you will find something.
One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
Transaction
BD50: Activate Change Ptrs for Mess. Type
BD61: Activate Change Pointers - Generally
and use report RBDMIDOC for triggering IDoc.

BADI/User exit for ME18 to specifically check for Approval Level...

Hi all,
I hope this is not a repost. I have found none so far in SDN forum. However if do, please point it to me. I will gladly close this thread.
Ok, i need a userexit/badi, whichever will do, to check for user approval levels in ME18.
So far I couldn't find a user exit/Badi that is suitable in my SAP system using SMOD and the program that find user exit by TCODE.
I hope SAP do provide a user exit that can actually check for user Approval Level in ME18.
Can anyone share this info on this issue?
Thanks,
William Wilstroth

There are few enhancement points available for ME18. Please check them once.
Thanks,
Srinivas

BADI / user exit for Tcode IW32?

Hi
Are there any BADIs / user exits for changing component data in Transaction IW32 for a maintainance order?
regards
cs

Enhancement
IWO10012                                Maintenance order: Priority handling on central header
Business Add-in
IWO_UI_USEFLEX                          BAdI for Calling Up an Alternative UI
I hope it helps.
Best Regards,
Vibha
Please mark all the helpful answers

BADI/USER EXIT for MIRO.

Hi All
I have added a new field (GST) on MIRO screen using GUI XT.
The requirement is such that I need to populate this field after I have entered the purchase order no (It needs to take the vendor from the PO and then its subsequent VAT no from the vendor master). I am not sure where to do this part of the coding.
i have tried to implement BADIs
BADI_ENJ_ALT_ADR
INVOICE_UPDATE
BADI_FDCB_SUBBAS01
but it doesn't help.
Is there any other BADI/User Exit that I can try.
Thanks in advance.
Harsh

Hi,
Bellow are the exit names for MIRO.
<Irrelevant enhancement list removed by moderator>
Regards,
Goutam Kolluru.
Edited by: Vinod Kumar on Feb 3, 2012 9:34 AM

BADI / user-exit for MD02 while creating Schedule Lines

Hi experts,
I have a problem with implementation that I'm designing.
Current situation:
While MRP run (MD02 or background) new Schedule Lines are being created in reference to MM Scheduling Agreement.
Example:
04.08.2014
SchLne
5500000415/00010
200
04.08.2014
IndReq
VSFB
200-
05.08.2014
SchLne
5500000415/00010
300
05.08.2014
IndReq
VSFB
300-
2 Schedule Lines where created - for wuantity 200 and 300.
Target:
There is a need to create more than one Schedule Line per day during MRP run. According to example there should be for example 2 Schedule Lines in 04/08 and 3 Schedule Lines in 05/08 all for quantity = 100. There is possibility to change Schedule Lines in ME38, but there is a need to make a change during creatin while MRP run.
04.08.2014
IndReq
VSFB
200-
04.08.2014
SchLne
5500000415/00010 *
100
04.08.2014
SchLne
5500000415/00010 *
100
05.08.2014
IndReq
VSFB
300-
06.08.2014
SchLne
5500000415/00010 *
100
06.08.2014
SchLne
5500000415/00010 *
100
06.08.2014
SchLne
5500000415/00010 *
100
So instead of creating only 2 Schedule Lines, MRP should create 5.
I'm looking for a BADI/user-exit to edit Schedule Lines which are to be created by MRP and change it tn reference to the needs.
I found only one BADI:
BADI: MD_CHANGE_MRP_DATA
method: CHANGE_MDPSX_MDBS
The priblem is that this method is only being executed when there are Schedule Lines which already exist.
Maybe some of you have done some extension similar to mine? Please give me advice where I should put extension.
Thanks in advance!

Dear Saravaran,
Thanks for the reply.
This will not suits to us. The provided BADI will works upto Posting the material document in transaction MIGO and it will not considered for the FI level entries.
Hope you could have understand mine requirement.
The requirement of mine is:
While doing the GR with ref to PO the material documnet will be posted and subsequently FI documnet will be generated in Background. While generating the FI document i need to manipulate the values for the G/L. So that the manipulated values will be flow into BKPF and BSEG tables.
Thanks.
Regards
Swamy

BADI/User exit for MIGO fi postings

Hello Experts,
I have one requirement regarding at the time of MIGO accounting entry is generating based on the OBYC settings,now the client want along with this entry, want to create one more FI document through background,In the background we will give the debit g/l and credit g/l.That means at the time of MIGO two FI documents has to generate one is with OBYC setting gl's and second FI entry is from programe hard coded gl's.
For this requirement has any BADI/USER Exit.I appriciate your valuable inputs.
Regards,
Nivas.

Hi,
May I know why you need two accounting documents?
You may refer the similar thread: BADI / Exit required for MIGO for posting FI document
And about the number ranges - I would suggest a custom number range object and a different number range for these additional documents.
Also refer the doc: Methods to find Customer/User Exit's & BADi's for a Transaction Code!
Regards,
AKPT

BADI/User-Exit for MD14

Hi,
Our client wants to update certain data in PR while the PRs are created from Planned orders or after a PR is created from a Planned order.
I've implemented BADI MD_PURREQ_CHANGE but while testing, the debugger is not taking to the break point.
Thus it appears that this BADI is not applicable for MD14.
I need a BADI/User exit where I can change the material description in PR.
Please help.Helpful answers shall be rewarded.

Hi abhijit,
Check this program.You will get all exits for a transaction.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

BADI/User Exit for KE51 and KE52

Hi Experts,
I am searchinf for a BADI/User exit In profit center master transactions KE51 and KE52 which should trigger when we activate the Profit center and after the data base committed as i need to send the changed profit center data to other system.
any ideas will be highly appreciated.
Thanks,
Rajinikanth

Try
PCA00003 Derive Partner Profit Center for External Deliveries
EXIT_SAPLPC45_002
EC-PCA: Activate Derivation of Partner Profit Center

BADI/user exit for ME21N - Warning message for "our reference" field

Similar Messages

Maybe you are looking for