BADI/User Exit for Order processing
Hi Experts,
I have a requirement that whenever someone modifies the order belonging to a specific order category then some error/ warning is issued. Can you please suggest some User Exit/BADI in APO for the same.
Hi Tiago,
My requirement is to block the processing of Released process order from both Product view and Detailed Scheduling Board.
If I am getting you correctly then in the mentioned BAdI and Method --I should call FM --/SAPAPO/OM_PEG_CAT_GET_ORDERS (to fetch orders by order category) to see whether the order category is for released process order or not.
If its Released process Order --then I should block the change. Is that correct for both Product View and Planning Board?
Similar Messages
-
BADI / User exit for Purchase order(ME21N) after saving the document
Hi expert,
I need the BADI / User exit for Purchase order(ME21N) after saving the document
This is for email sending after create the purchase order so PO document number will be the import parameter
pls help me
point will be reward
Regards,
GaneshHi Ganesh,
Could you please share your solution?
Thanks.
Hoops
Edited by: Hoops on Jun 13, 2011 10:51 PM -
BADI / user exit for Tcode IW32?
Hi
Are there any BADIs / user exits for changing component data in Transaction IW32 for a maintainance order?
regards
csEnhancement
IWO10012 Maintenance order: Priority handling on central header
Business Add-in
IWO_UI_USEFLEX BAdI for Calling Up an Alternative UI
I hope it helps.
Best Regards,
Vibha
Please mark all the helpful answers -
Dear Experts,
When I'm setting the BUDGETED status manually to Internal Order (With out distributing the Budget to Order in IM52) and after if I m setting RELEASE status the system is accepting. So, I want to stop this without giving the budget in IO, it should not accept to release IO.
This is not possible with User Status, coz' User may go and set manually "REL" Status.
can anyone suggest me the BAdi/User Exit for KO02(Internal Order Change) tcode.
Thanks,
Sanju.When you set a User status , you can assign an Authorization Object on who can change the status .
Follow the path in SPRO--> Controlling --> Internal orders --> Order Master Data > Status Management> Define authorization Keys for Status Management
Define Authorization Keys for Status Management
In this step you define authorization keys which you can use to set up authorization checks when you manually set or delete a user status. When the system sets a user status as a reaction to business transaction, it does not perform an authorization check.
When you set or delete a user status, the system checks whether the user is authorized for this action. In addition to the status profile and the object type, the system also checks the authorization key assigned to the user status in question.
Example
You want to define that certain user statuses can be changed only by a specified employee group.
To do this, create an authorization key and assign it to the relevant user statuses.
In the general authorization maintenance you can then assign authorizations for this key via the authorization object B_USERSTAT.
Activities
1. Check whether you want to define authorizations for your user statuses.
2. If necessary, create authorization keys as follows:
a) Choose "New entries".
b) Enter a key and an explanatory text in the appropriate fields and choose "Save".
You have now created the authorization key.
3. Assign the authorization key to one or more user statuses in your status profile.
4. Define corresponding authorizations and include them in the relevant authorization profiles. -
BADI/User Exit for custom table update from Delivery
Hi
Our requirement is to update a custom table with the delivery number and other related details when the picking status is changed to "C". Kindly suggest BADI/User exit for this requirement .
Thanks in Advance for your immediate help .Hi Joseph,
See SAP Note 415716 - User exits in delivery processing. It says when you have the document number available, what is permitted, what not, ....
I hope this helps you
Regards
Eduardo -
BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N
Hi,
I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
Please could anyone help me with this .
Regards,
Sushanth H.S.Hi!
User Exits in Transportation
In Transportation, there are enhancements that you can use with transaction CMOD.
For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
Business Add-Ins in the transports
Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
Customer-specific functions can be executed before the save time and after the database update.
The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
IN_UPDATE: BADI is called up after the database update.
Standard Settings
Creating a BADI method:
Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
Afterwards, go to the heading and activate the interface.
Regards
Tamá -
BADI/User Exit for validation in WAK1
Hi,
I need to put validations in transaction WAK1.
for the Site Groups under the site groups TAB.
Please suggest if any BADI or User Exit is available to do this.
I checked there are BADI's "WAKT_BADI_001" to "WAKT_BADI_008" but they are for SAP Internal Use only.
Regards
AnkurHi
Below are some of BADIs available for WAK1. Please check.
Exit
WCOUP001 User exit for coupon processing in POS inbound
BADIs
RDM_BAPI_PROMO_CREATE - Enhancement Spot (RDM_OPT_PROMO_IN)
RDM_PROMO_POST - Enhancement Spot
RDM_PROMOTION_WAK1 - Enhancement Spot
WAKT_BADI_001 -
~~~Ganesh Kumar K. -
How to find the user exit for order cancellation
I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
I have got a Zreport where this order should not come as open order item.
Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
Regards.hi
pls tell me t.code so that i will send all user exits related to that particular t.codes
Thanks & Regards
phaneendra -
BADI/ User Exit for transaction FTR_EDIT/FTR_CREATE initial screen
Hi All,
I want a BADI/User Exit for FTR_EDIT/FTR_CREATE transactions to validate company code and partner fields.
please provide your suggestions.Hi,
here is a coding example that I implemented in the BAdI FTR_TR_GENERIC. This coding is executed when the user press the check button. The method is EVT_TRANSACTION_CHECK. This example is checking the payment date dfaell if it is equal to the system date. If not then a message is sent to the message handler. Here is the code:
DATA: faelligkeit TYPE d,
faelligkeit_text type c length 10,
meldungstext TYPE c LENGTH 100.
FIELD-SYMBOLS: <it_source> LIKE LINE OF pi_proxy_transaction->a_tab_conditions.
IF sy-uname = 'XYZ'.
* BREAK-POINT.
READ TABLE pi_proxy_transaction->a_tab_conditions INDEX 1
ASSIGNING <it_source>.
faelligkeit = <it_source>-dfaell.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
DATE_INTERNAL = faelligkeit
IMPORTING
DATE_EXTERNAL = faelligkeit_text
EXCEPTIONS
DATE_INTERNAL_IS_INVALID = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF faelligkeit <> sy-datum.
CONCATENATE 'Fälligkeit' faelligkeit_text 'incorrect' INTO meldungstext separated by space.
CALL METHOD pi_proxy_messages->set_message
EXPORTING
pi_message_id = 'T0'
pi_message_number = '101'
pi_message_severity = 'E'
pi_message_var1 = meldungstext
EXCEPTIONS
OTHERS = 4.
ENDIF.
ENDIF.
It is not a really nice coding but it shows in a simple way how to use the BAdI.
Regards
Robert -
BADI/ User Exit for transaction FTR_EDIT/FTR_CREATE
Hi All,
I want a BADI/User Exit for FTR_EDIT/FTR_CREATE transactions to validate company code and partner fields.Hi,
here is a coding example that I implemented in the BAdI FTR_TR_GENERIC. This coding is executed when the user press the check button. The method is EVT_TRANSACTION_CHECK. This example is checking the payment date dfaell if it is equal to the system date. If not then a message is sent to the message handler. Here is the code:
DATA: faelligkeit TYPE d,
faelligkeit_text type c length 10,
meldungstext TYPE c LENGTH 100.
FIELD-SYMBOLS: <it_source> LIKE LINE OF pi_proxy_transaction->a_tab_conditions.
IF sy-uname = 'XYZ'.
* BREAK-POINT.
READ TABLE pi_proxy_transaction->a_tab_conditions INDEX 1
ASSIGNING <it_source>.
faelligkeit = <it_source>-dfaell.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
DATE_INTERNAL = faelligkeit
IMPORTING
DATE_EXTERNAL = faelligkeit_text
EXCEPTIONS
DATE_INTERNAL_IS_INVALID = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF faelligkeit <> sy-datum.
CONCATENATE 'Fälligkeit' faelligkeit_text 'incorrect' INTO meldungstext separated by space.
CALL METHOD pi_proxy_messages->set_message
EXPORTING
pi_message_id = 'T0'
pi_message_number = '101'
pi_message_severity = 'E'
pi_message_var1 = meldungstext
EXCEPTIONS
OTHERS = 4.
ENDIF.
ENDIF.
It is not a really nice coding but it shows in a simple way how to use the BAdI.
Regards
Robert -
User Exit for Inbound Process - Changing IDOC control record
Hi,
I want to utilize the identification field (under details tab) of the IDOC Control Record. What is the suitable user exit for inbound process that i can use to change the IDOC control record?It's been a long time since I have done any IDOC processing.
Go to SE37 and enter the function module IDOC_INPUT_ORDERS. Display the source code. Search for "CALL CUSTOMER". You should see several "CALL CUSTOMER-FUNCTION" lines. These are enhancements where you can manipulate the IDOC data. If you locate the correct one (where the data is read from the IDOC but not yet validated), you should be able to map the partner function value. Double-clicking on the number in quotes will bring you to an "EXIT_" function module. A "ZX" INCLUDE program is referenced. If you haven't used the exit yet, double-clicking on the ZX INCLUDE will create it. The values passed into the function module are available in the INCLUDE.
Ideally, you should create a project in transaction CMOD that references the chosen enhancement. This way you can activate/deactivate without commenting/uncommenting the code in the INCLUDE. -
Badi & User Exit for ME21N & ME22N
Hi,
My requirement is when a Purchase order is created using ME21n or when a line is added or changed using ME22n, the system should copy the vendors tax jurisdiction to the purchase order line items jurisdiction code. I tried badi (ME_PROCESS_PO_CUST) but could not suceed. Can any one tell me if any badi or user exit available for the same???
Thanks in Advance.hi,
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
Business Add-in
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001 Control Items for Contract Release Order
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
No.of Exits: 35
No.of BADis: 55
Arunima -
Hi Experts,
Please understand my issue/requirement that, I have to make the item conditions tab in display or deactivate mode to prevent users to change or create the price or conditions while posting VF01.
As std, system allows users to create or change the prices/qts and also add new conditions. My client needs to make it as display mode for all type of postings in VF01.
Please guide me, how to arrive it through Exit or Enhancements.
thanks & regards
Sankar.Hi,
Try these steps to find the BADI.
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler => get_class_name_by_interface'.
5. Then run your transaction.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.
These are exits in VF01.
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
J_3RSINV User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
Hope this helps u.
Thanks. -
BADI/user exit for ME21N - Warning message for "our reference" field
Dear all,
I have a problem.
In ME21N, I need to show a warning message (message w... ) when user enter an already-used-before input in "Our reference' field (EKKO-UNSEZ).
I've tried in two methods.
1. Using fm EXIT_SAPMM06E_004. But it can only works for Error message. My warning message never shows up.
2. Tried to implement classic BADI ME_PROCESS_PO_CUST, using the PROCESS_HEADER method. Got the break-point spot on, but still didn't show the warning message.
Why is my warning message always got override?
Please advise.
Thanks in advance
AhmadHi Ahmad,
Check the below links:
Unable to put Warning messages in ME21N and ME22N in Exit / BAdI in ECC 6.0
Warning message in me22n check user-exit can't process?
Custome warning message in T. code me51n me52n & me21n , me22n
Regards,
Nisha Vengal. -
BADI/USER EXIT for MIRO.
Hi All
I have added a new field (GST) on MIRO screen using GUI XT.
The requirement is such that I need to populate this field after I have entered the purchase order no (It needs to take the vendor from the PO and then its subsequent VAT no from the vendor master). I am not sure where to do this part of the coding.
i have tried to implement BADIs
BADI_ENJ_ALT_ADR
INVOICE_UPDATE
BADI_FDCB_SUBBAS01
but it doesn't help.
Is there any other BADI/User Exit that I can try.
Thanks in advance.
HarshHi,
Bellow are the exit names for MIRO.
<Irrelevant enhancement list removed by moderator>
Regards,
Goutam Kolluru.
Edited by: Vinod Kumar on Feb 3, 2012 9:34 AM
Maybe you are looking for
-
I cannot open Firefix to use my internet.
-
Titles, Date/timings in CSV file.
Hello Friends, Just curious to know if we could add the titles ,date,time in our excel report or not. I have a couple of reports with me and i have activated the "Report Export" functionality in that. Just want to know how i can add these things in r
-
Possibility of calling ALV report
hi experts, i have a requirement that i have to design an entry screen whcih contain pushbuttons (SAVE, CLEAR ,DISPLAY). whenever user pressed DISPLAY, he wants to call the selection screen of an alv report which is already exists. is that possible t
-
Set the margin automatically in a landscape report
How can I set the margin automatically in a landscape report without manual setting in page setup before printing the report in oracle report6?
-
I am quoting a very interesting article from Macfixit. May be of use to quite a few CS3 users Adobe CS3 deactivation limits Adobe's Creative Suite 3 imposes a limit of 20 deactivations per license. This is causing problems for users of cloned backups