Badi/user exit for sales and purchase order
HI folks,
I have to export the value of order type to a memory id for create and change transaction of sales order and the purchase order, I serached a lot for badis in purchase order and created implementation for that, but it didnt work. Please help me out....
thanks in advance
Hi,
As written I need to export the value of order type into a memory id at the moment below transactions are hit:
va01,va02, me21n, me22n.
for va01 first u need to enter the order type and then press enter...at this event I need to export its value,
for va02 the value of order is entered and then press enter,
similarly I have to export the purchase order type during execution of ME21n and ME22n.
I hope u will understand the problem better....If not please tell me
Similar Messages
-
BADI/User Exit for KE51 and KE52
Hi Experts,
I am searchinf for a BADI/User exit In profit center master transactions KE51 and KE52 which should trigger when we activate the Profit center and after the data base committed as i need to send the changed profit center data to other system.
any ideas will be highly appreciated.
Thanks,
RajinikanthTry
PCA00003 Derive Partner Profit Center for External Deliveries
EXIT_SAPLPC45_002
EC-PCA: Activate Derivation of Partner Profit Center -
How to extract User status for Sales and purchase contracts
Hello,
We need to load the User status linked to sales and purchase contract.
I think that there is no datasource in BI content.
What is the better solution ?
- Enhance a standard datasource like 2LIS_11_VASTH with a status field (This solution is not ok for Purchase contract)
- Create a spécific datasource to extract this status
- Others
Thanks for your help
Best regards
ChristopheHi,
In your scenario its better to use generic extractor to get the reqd data. This data can than be stored in a DSO on the BI side.
And you can look up for the user status using a routine .
Regards,
Rahul -
User Exit for Sales and Distribution
Hi,
I am creating some custom segments, Please provide me the include or enhancement name where i need to write the user exit.
Module: Sales and distribution
IDOC Type: idoc_output_ordersFunction EXIT_SAPLEINM_002
Include ZXM06U02
Enhancement MM06E001
The last segment in table INT_EDIDD will tell you what was just appended, so use that to determine when to run your code to add the custom segment(s). -
Badi/User Exit for IE02 and IP02 after status changed to deleted/deactivate
Hi all,
I need to change the status of the Plan Maintenance(IP42) when the Functional Location(IP02) or the Equipment(IE02) status is change to deactivated/deleted.
I cant find any related badi or userexit that can be used to achieve the above purpose.
Is there any suggestion available to achieve that? Please advise. Thanks.
Regards,
lsemunHi,
You will either have to use the user exit on save or use the change documents functionality through transaction SWEC to trigger a custom process to accomplish your needs.
Regards
Narasimhan -
BADI / User exit for Purchase order(ME21N) after saving the document
Hi expert,
I need the BADI / User exit for Purchase order(ME21N) after saving the document
This is for email sending after create the purchase order so PO document number will be the import parameter
pls help me
point will be reward
Regards,
GaneshHi Ganesh,
Could you please share your solution?
Thanks.
Hoops
Edited by: Hoops on Jun 13, 2011 10:51 PM -
What are the User Exits for Sales Order creation process?
Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
MindaugasPlease check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar -
Dear all SAP experts,
How to find out the user exits for sales document type? Especially the user exits which are called when we save the sales order.
With best regards,
Allabaqsh G. PatilHi,
Also there is user exit to refresh data
USEREXIT_REFRESH_DOCUMENT
It is always necessary to refresh user-specific data before *
the next document will be processed. *
This can be done in this userexit. *
This userexit can be used to refresh user-specific data *
when the processing of a sales document is finished *
- after the document is saved *
- when you leave the document processing with F3 or F15 *
It may be necessary to refresh user-specific data before *
the next document will be processed. * -
Customizing for Back to Back Sales and Purchase Order
Dear Gurus,
Can anybody give me detailed customizing steps so that I can create a back to back sales and purchase order ? How does this process work ?
Would really appreciate if you dont just paste the SAP help URL over here.
ThanksDear,
Please check: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/business_maps/guid/eg1slxvyat1odhrwoi8vc29sdxrpb25jb21wb3nlci5zyxauy29tl3nvy292awv3l21jcgdl%0d%0adc5hc3a/cgfja2fnzwlkpsz2awv3pxnty3jlbmrlcjimawq9muu2rtqwmjk5mue2nduwmzk0m0fg%0d%0aqtnfnjg1rjbgmkymjnhzbc1iyxnlpwh0dha6ly9zb2x1dglvbmnvbxbvc2vylnnhcc5jb20vc29j%0d%0ab3zpzxcvbwnwz2v0x21pbwuuyxnwp3vybd1zzg5fbmv3lyymd2vilxvybd1odhrwczovl3nvbhv0%0d%0aaw9uy29tcg9zzxiuc2fwlmnvbs9zb2nvdmlldy9ty3bnzxrfbwltzs5hc3a/dxjspsymehnslwxp%0d%0ac3q9c2rux2dlbmvyywxfcmvuzgvylnhzbhq7c2rux2xpbmtyzxdyaxrpbmcuehnsddtnzw5lcmf0%0d%0azuhutuxfu0rolnhzbhqmjnbhy2thz2utawq9jizyzxnvdxjjzxr5cgu9c2rux3nvbhv0aw9ux2nv%0d%0abxbvc2vyx2z1bgxwywdljizwyxjlbnrssuq9l3dlymnvbnrlbnqvd2vicgfnzxmvynb4lzqwielu%0d%0azhvzdhjpzxmvuhvibgljifnly3rvci9cdxnpbmvzcybqcm9jzxnzifbsyxrmb3jtigluifb1ymxp%0d%0ayybtzwn0b3imjnrpdgxlpckgr2xvymfsifryywrlie1hbmfnzw1lbnq6iejhy2stdg8tqmfjaybu%0d%0acmfkaw5nifbyb2nlc3mmjnzpcnr1yww9dhj1zq==;jsessionid=(J2EE3417300)ID0462866350DB00827079450451046937End?prtmode=default
http://help.sap.com/bp_cp1600/CP_Global/Solution_Map/1E6E402991A64503943AFA3E685F0F2F.htm
http://help.sap.com/saphelp_gts71/helpdata/en/0b/333a426ea5b26be10000000a155106/frameset.htm
Regards,
Syed Hussain. -
Hello Experts
i am having a requirement where in i will have to perform certain validations before posting PO and material document (MIGO). If these validations fail, PO or Material document should not be posted.
i managed to find certain BADI and user-exits (MB_CF001 and MB_DOCUMENT_BADI) typically for MIGO but when tested they use to get triggered once these doucment numbers are generated.
what i am looking at is cancel the process by giving the hard-error.
thanks in advance.
regards
rajeevHi,
<b>User exits for MIGO:</b>
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read From RESB and RKPF For Print List in MB26
MBCFC003 Maintenance of batch master data for goods movements
MBCFC004 Maintenance of batch specifications for goods movements
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
<b>User eits for PO:</b>
These are the User exit for CO01 ( Create PO)
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting
I am giving you the list of all user exits available for ME21N:
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
For your purpose you can probably try MM06E005. Or you can also try BADI ME_PROCESS_PO_CUST.
You can also check this BADI available for PO:
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Crea
ME_BSART_DET Change document type for automatically generated POs
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standa
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Cust
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Custom
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_RELEASE_CREATE BAdI: Release Creation for Sched. Agreemnts with Rel. Do
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_REQ_POSTED Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Orde
SMOD_MRFLB001 Control Items for Contract Release Order
Transaction codes for BADI are:
SE18 - Business Add-ins(BADIs): Definition transaction
SE19 - Business Add-ins(BADIs): Implementation transaction
SE24 - Class Builder
Link for all user exits in SAP:
http://www.easymarketplace.de/userexit.php
Pls reward helpful points.
Regards,
Ameet -
Badi & User Exit for ME21N & ME22N
Hi,
My requirement is when a Purchase order is created using ME21n or when a line is added or changed using ME22n, the system should copy the vendors tax jurisdiction to the purchase order line items jurisdiction code. I tried badi (ME_PROCESS_PO_CUST) but could not suceed. Can any one tell me if any badi or user exit available for the same???
Thanks in Advance.hi,
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
Business Add-in
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001 Control Items for Contract Release Order
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
No.of Exits: 35
No.of BADis: 55
Arunima -
Urgent: User exit for ME22N and ME32K transactions
I need to know a user exit(s) for changing Purchase Order and Contract line item fields from EKPO table. Please let me know if you know any. BADIs are also fine if the user exit does not exits. Thanks
Dear AP,
I'm enlisting all the exits :-
Transaction Code - ME22N Change Purchase Order
Exit Name
Description
AMPL0001
User subscreen for additional data on AMPL
LMEDR001
Enhancements to print program
LMELA002
Adopt batch no. from shipping notification when posting a GR
LMELA010
Inbound shipping notification: Transfer item data from IDOC
LMEQR001
User exit for source determination
LMEXF001
Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001
Customer-Specific Source Determination in Retail
M06B0001
Role determination for purchase requisition release
M06B0002
Changes to comm. structure for purchase requisition release
M06B0003
Number range and document number
M06B0004
Number range and document number
M06B0005
Changes to comm. structure for overall release of requisn.
M06E0004
Changes to communication structure for release purch. doc.
M06E0005
Role determination for release of purchasing documents
ME590001
Grouping of requsitions for PO split in ME59
MEETA001
Define schedule line type (backlog, immed. req., preview)
MEFLD004
Determine earliest delivery date f. check w. GR (only PO)
MELAB001
Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1
Enhancement to Document Overview ME21N/ME51N
MEVME001
WE default quantity calc. and over/ underdelivery tolerance
MM06E001
User exits for EDI inbound and outbound purchasing documents
MM06E003
Number range and document number
MM06E004
Control import data screens in purchase order
MM06E005
Customer fields in purchasing document
MM06E007
Change document for requisitions upon conversion into PO
MM06E008
Monitoring of contr. target value in case of release orders
MM06E009
Relevant texts for "Texts exist" indicator
MM06E010
Field selection for vendor address
MMAL0001
ALE source list distribution: Outbound processing
MMAL0002
ALE source list distribution: Inbound processing
MMAL0003
ALE purcasing info record distribution: Outbound processing
MMAL0004
ALE purchasing info record distribution: Inbound processing
MMDA0001
Default delivery addresses
MMFAB001
User exit for generation of release order
MRFLB001
Control Items for Contract Release Order
No of Exits: 35
Transaction Code - ME32K Change Contract
|Exit Name|Description |
AMPL0001
User subscreen for additional data on AMPL
LMEDR001
Enhancements to print program
LMELA002
Adopt batch no. from shipping notification when posting a GR
LMELA010
Inbound shipping notification: Transfer item data from IDOC
LMEQR001
User exit for source determination
LMEXF001
Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001
Customer-Specific Source Determination in Retail
M06B0001
Role determination for purchase requisition release
M06B0002
Changes to comm. structure for purchase requisition release
M06B0003
Number range and document number
M06B0004
Number range and document number
M06B0005
Changes to comm. structure for overall release of requisn.
M06E0004
Changes to communication structure for release purch. doc.
M06E0005
Role determination for release of purchasing documents
ME590001
Grouping of requsitions for PO split in ME59
MEETA001
Define schedule line type (backlog, immed. req., preview)
MEFLD004
Determine earliest delivery date f. check w. GR (only PO)
MELAB001
Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1
Enhancement to Document Overview ME21N/ME51N
MEVME001
WE default quantity calc. and over/ underdelivery tolerance
MM06E001
User exits for EDI inbound and outbound purchasing documents
MM06E003
Number range and document number
MM06E004
Control import data screens in purchase order
MM06E005
Customer fields in purchasing document
MM06E007
Change document for requisitions upon conversion into PO
MM06E008
Monitoring of contr. target value in case of release orders
MM06E009
Relevant texts for "Texts exist" indicator
MM06E010
Field selection for vendor address
MMAL0001
ALE source list distribution: Outbound processing
MMAL0002
ALE source list distribution: Inbound processing
MMAL0003
ALE purcasing info record distribution: Outbound processing
MMAL0004
ALE purchasing info record distribution: Inbound processing
MMDA0001
Default delivery addresses
MMFAB001
User exit for generation of release order
MRFLB001
Control Items for Contract Release Order
No of Exits: 35
Regards,
Deva. -
User exit while saving Service Purchase Order
i want to update one z table from the Service PO, after saving. Hence i require , an user exit, which will give the details of the service tab , of the PO. I am not able to get any exit, where the details of the Service tab, of the transaction me22n.
Below is the screen of the Service tab of the purchase Order Screen :
<b>Line DeService numbShort text Quantity Uni Gross priceCr
10 3000001 Sub-Con Recruitment Commissio91 DAY1,249.00 IN
20 3000001 Sub-Con Recruitment Commissio91 DAY1,249.00 IN</b>hi,
check this out .
Transaction Code - ME21 Create Purchase Order
Exit Name Description
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
MM06E011 Activation of PReq Lock
No of Exits: 38
Kishi. -
Dear Experts,
When I'm setting the BUDGETED status manually to Internal Order (With out distributing the Budget to Order in IM52) and after if I m setting RELEASE status the system is accepting. So, I want to stop this without giving the budget in IO, it should not accept to release IO.
This is not possible with User Status, coz' User may go and set manually "REL" Status.
can anyone suggest me the BAdi/User Exit for KO02(Internal Order Change) tcode.
Thanks,
Sanju.When you set a User status , you can assign an Authorization Object on who can change the status .
Follow the path in SPRO--> Controlling --> Internal orders --> Order Master Data > Status Management> Define authorization Keys for Status Management
Define Authorization Keys for Status Management
In this step you define authorization keys which you can use to set up authorization checks when you manually set or delete a user status. When the system sets a user status as a reaction to business transaction, it does not perform an authorization check.
When you set or delete a user status, the system checks whether the user is authorized for this action. In addition to the status profile and the object type, the system also checks the authorization key assigned to the user status in question.
Example
You want to define that certain user statuses can be changed only by a specified employee group.
To do this, create an authorization key and assign it to the relevant user statuses.
In the general authorization maintenance you can then assign authorizations for this key via the authorization object B_USERSTAT.
Activities
1. Check whether you want to define authorizations for your user statuses.
2. If necessary, create authorization keys as follows:
a) Choose "New entries".
b) Enter a key and an explanatory text in the appropriate fields and choose "Save".
You have now created the authorization key.
3. Assign the authorization key to one or more user statuses in your status profile.
4. Define corresponding authorizations and include them in the relevant authorization profiles. -
BADI / user exit for Tcode IW32?
Hi
Are there any BADIs / user exits for changing component data in Transaction IW32 for a maintainance order?
regards
csEnhancement
IWO10012 Maintenance order: Priority handling on central header
Business Add-in
IWO_UI_USEFLEX BAdI for Calling Up an Alternative UI
I hope it helps.
Best Regards,
Vibha
Please mark all the helpful answers
Maybe you are looking for
-
How to change default zoom in outlook 365 permenently
I use the preview/reading pane in outlook 365 and I can see the slider bar at the bottom where I can adjust the zoom. Problem is I have to enlarge it each time for every email I want to read. How can set this to something other than 100% and make it
-
Why is my home sharing no longer working?
I have used itunes home sharing before. Every since the recent iTunes updates, I can no longer get the home sharing to work. Computers are "authorized" and "home sharing" is on for both computers. The computer that I am trying to pull music to (Ma
-
How to control the starting time in terms of expression?
Hallo again! I know there must be some ways to trigger the expression to start not immediately, but at any time I wish. For e.g. I have here a code: veloc = 35; amplitude = 30; decay = 1.0; y = amplitude*Math.cos(veloc*time)/Math.exp(decay*time); val
-
hey guys when i try and put music to my ipod through the itunes software it tells me there is an error copying music to the ipod i have restored the pod 5 times now with no luck in getting music back on to it the first problem it had was when i eject
-
Hi, I know that PreparedStatement with the bind variables increase the DB performance. But I used the PreparedStatement in my application with no bind variables for some reson. Will it give any performance boost over the simple Statement or not? Than