BADI, User Exit or Dynamic Action for Infotype 24

Hello,
in PA30, our HR admin team want me to write an Infotype 19 record when a user amends or creates an Infotype 24 record.
I spent all day yesterday trying to find a solution to this.
Can anyone please tell me:
1) Do dynamic actions work for IT0024? - our HR admin suggest that they don't as there is no 'subtype'.
2) Should user exit PBAS0001 (function EXIT_SAPFP50M_002) work for IT0024? I have tried putting in a test display which should appear on save of IT0024 and this does not appear to work.
3) Will BADI HRPAD00INFTY work? If so, does anyone have an example of code that tests the 'old' IT0024 record before modification - the documentation does not help too much with a good example. I'm planning to use this as a last resort due to the need for an access key.
Many thanks in advance,
Keiron.

The BADI is probably the best way to go.  You should not need an access key - you do not put your code in the BADI, but instead create an implementation of it in a Z name range.  Go to SE18 for the BADI and display it, and select menu option implementation--->create.  Give a Z name and then you will have a place to put your code.  You can double click on the methods shown in your implementation to get to the ABAP code editor.
Exit PBAS0001 should also work - put a breakpoint in it to see if it is called.
Both the BADI and Exit are called at almost the same point in the SAP PA30 code - however the BADI is called in some cases when the exit is not.  It is outside an additional IF test in the SAP code.
Andrew

Similar Messages

  • How to maintain Dynamic Action for Infotype 2 .

    Hi SAP-HR Experts .
    I want to maintain Dynamic Action for Infotype 2 .
    If Employee's No. of Children exceeds then System immediately ask for maintenence of IT-21 also at the same time .
    How to maintain code in table V_T588Z .
    Please elaborate it .
    Thanks & Regards : rajneesh .

    Hi kanupriya .
    your reply was Very helpful for me u2026But i unable to achieve the desired result . I maintained the entries in View V_T588Z like this .My Objective is when some body update the Infotype 2 for a employee , and his/her no. of Childrens exceeds by 2 then system should jump into IT-21 for
    updation of IT-21 at the same time . I think this what Dynamic Actions work out .
    ==========================================================
         ANZKD 04 500 P PSPAR-TCLAS='A'
         ANZKD 04 175 P T001P-MOLGA='40'
         ANZKD 04 176 P P0002-ANZKD>='2'
         ANZKD 04 177 I INS,0021,2,01
         ANZKD 04 178 I INS,0021,2,02
    ==========================================================
    Please suggest me what to do , as the above entries are not workout .
    Your help will be very appreciated.
    Regards ,
    rajneesh(9873607039)

  • BADI/User Exit for KO02

    Dear Experts,
    When I'm setting the BUDGETED status manually to Internal Order (With out distributing the Budget to Order in IM52) and after if I m setting RELEASE status the system is accepting. So, I want to stop this without giving the budget in IO, it should not accept to release IO.
    This is not possible with User Status, coz' User may go and set manually "REL" Status.
    can anyone suggest me the BAdi/User Exit for KO02(Internal Order Change) tcode.
    Thanks,
    Sanju.

    When you set a User status , you can assign an Authorization Object on who can change the status .
    Follow the path in SPRO--> Controlling --> Internal orders --> Order Master Data > Status Management> Define authorization Keys for Status Management
    Define Authorization Keys for Status Management
    In this step you define authorization keys which you can use to set up authorization checks when you manually set or delete a user status. When the system sets a user status as a reaction to business transaction, it does not perform an authorization check.
    When you set or delete a user status, the system checks whether the user is authorized for this action. In addition to the status profile and the object type, the system also checks the authorization key assigned to the user status in question.
    Example
    You want to define that certain user statuses can be changed only by a specified employee group.
    To do this, create an authorization key and assign it to the relevant user statuses.
    In the general authorization maintenance you can then assign authorizations for this key via the authorization object B_USERSTAT.
    Activities
    1. Check whether you want to define authorizations for your user statuses.
    2. If necessary, create authorization keys as follows:
    a) Choose "New entries".
    b) Enter a key and an explanatory text in the appropriate fields and choose "Save".
    You have now created the authorization key.
    3. Assign the authorization key to one or more user statuses in your status profile.
    4. Define corresponding authorizations and include them in the relevant authorization profiles.

  • How to make use of a Badi in dynamic action on infotype?

    Hi...
    i need to create a dynamic action on infotype 6 to create a record in infotype 207.
    I have to use badi for it.
    i need to use 'f' for 'Indicator for step'. right?
    kindly help..
    Thnx and regards.
    Abhi.

    Hi,
    Using F calls a routine and not BAdI.
    If record will directly be created then there is no need to write Z program and calling it using F indicator. However, in case there is some logic which can not be written directly in the Dynamic Action then you need to write that logic in a routine and call it using F indicator.
    VK

  • BADI/user exit for transcation code "BP" in CRM

    Hi Experts,
    Is there a BADI / user exit that is triggered after successful saving/updating of Business Partner using transaction code "BP"?
    We want to send general infos such as partner number, Name, Birth date, etc. about the business partner being created/updated using IDoc.
    We are using CRM WinClient 4.0.
    If you know  the steps on how this requirement will be done, kindly post them.
    Thank you very much.

    I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure  you will find something.
    One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
    Transaction
    BD50: Activate Change Ptrs for Mess. Type
    BD61: Activate Change Pointers - Generally
    and use report RBDMIDOC for triggering IDoc.

  • BADI/User Exit suggestion - for determining Partner in PO header

    Hi All,
    I want to be able to automatically populate and determine a manual partner function within the header of a purchase order creation.
    Example, when PO is allocated against account assignment 'P' then go to the WBS element assigned and retrieve the specific partner number for partner function type XX. Then populate this into the relevant header partner function of the PO.
    Any ideas of which BADI/User exit could be used in ME21N?
    Thanks
    Steve

    Hi Steve
    Before going to search the UserExit/BADI, please remember your account assignment will be at item level and the partner will be at Header level.If you have number of line items with different account asssginments or different WBS elements under account assignment P, it is difficult to determine the partner functional at Header level.Please think on how can you build logic? There are number of BADI/Exits available for Purchase order.
    Regards
    Ramakrishna

  • BADI/USER EXIT for FB60

    Hi,
    please can you tell any BADI or USER EXIT that are available for FB60 Transaction code.
    Thanks
    cra

    hi
    following exits are available
                                                                                    Transaction Code - FB60                     Enter Incoming Invoices                                                                               
    Exit Name           Description                                                                               
    F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment                  
    F050S002            FIDCC1: Change IDoc/do not send                                         
    F050S003            FIDCC2: Change IDoc/do not send                                         
    F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send                
    F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document                 
    F050S006            FI Outgoing IDoc: Reset Clearing in FI Document                         
    F050S007            FIDCCH Outbound: Influence on IDoc for Document Change                  
    F180A001            Balance Sheet Adjustment                                                
    FARC0002            Additional Checks for Archiving MM Vendor Master Data                   
    RFAVIS01            Customer Exit for Changing Payment Advice Segment Text                  
    RFEPOS00            Line item display: Checking of selection conditions                     
    RFKORIEX            Automatic correspondence                                                
    SAPLF051            Workflow for FI (pre-capture, release for payment)                                                                               
    No of Exits:         13                                                                      
    To search for a badi, go to se 24 display <b>class cl_exithandler.</b>
    double click on method get_instance, get a break point on case statement.
    execute and start the required transaction in new session.
    look for variable <b>exit_name.</b> It would show the available badi's.
    Hope this helps
    <b>if it helped, you can acknowledge the same by rewarding</b>
    regards
    dinesh

  • BADI / user exit for Tcode IW32?

    Hi
    Are there any BADIs  / user exits for changing component data in Transaction IW32 for a maintainance order?
    regards
    cs

    Enhancement                                                                               
    IWO10012                                Maintenance order: Priority handling on central header                                                                               
    Business Add-in                                                                               
    IWO_UI_USEFLEX                          BAdI for Calling Up an Alternative UI                  
    I hope it helps.
    Best Regards,
    Vibha
    Please mark all the helpful answers

  • BADI/USER EXIT for MIRO.

    Hi All
    I have added a new field (GST) on MIRO screen using GUI XT.
    The requirement is such that I need to populate this field after I have entered the purchase order no (It needs to take the vendor from the PO and then its subsequent VAT no from the vendor master). I am not sure where to do this part of the coding.
    i have tried to implement BADIs
    BADI_ENJ_ALT_ADR
    INVOICE_UPDATE
    BADI_FDCB_SUBBAS01
    but it doesn't help.
    Is there any other BADI/User Exit that I can try.
    Thanks in advance.
    Harsh

    Hi,
    Bellow are the exit names for MIRO.
    <Irrelevant enhancement list removed by moderator>
    Regards,
    Goutam Kolluru.
    Edited by: Vinod Kumar on Feb 3, 2012 9:34 AM

  • BADI / user-exit for MD02 while creating Schedule Lines

    Hi experts,
    I have a problem with implementation that I'm designing.
    Current situation:
    While MRP run (MD02 or background) new Schedule Lines are being created in reference to MM Scheduling Agreement.
    Example:
    04.08.2014
    SchLne
    5500000415/00010
    200
    04.08.2014
    IndReq
    VSFB
    200-
    05.08.2014
    SchLne
    5500000415/00010
    300
    05.08.2014
    IndReq
    VSFB
    300-
    2 Schedule Lines where created - for wuantity 200 and 300.
    Target:
    There is a need to create more than one Schedule Line per day during MRP run. According to example there should be for example 2 Schedule Lines in 04/08 and 3 Schedule Lines in 05/08 all for quantity = 100. There is possibility to change Schedule Lines in ME38, but there is a need to make a change during creatin while MRP run.
    04.08.2014
    IndReq
    VSFB
    200-
    04.08.2014
    SchLne
    5500000415/00010 *
    100
    04.08.2014
    SchLne
    5500000415/00010 *
    100
    05.08.2014
    IndReq
    VSFB
    300-
    06.08.2014
    SchLne
    5500000415/00010 *
    100
    06.08.2014
    SchLne
    5500000415/00010 *
    100
    06.08.2014
    SchLne
    5500000415/00010 *
    100
    So instead of creating only 2 Schedule Lines, MRP should create 5.
    I'm looking for a BADI/user-exit to edit Schedule Lines which are to be created by MRP and change it tn reference to the needs.
    I found only one BADI:
    BADI:    MD_CHANGE_MRP_DATA
    method: CHANGE_MDPSX_MDBS
    The priblem is that this method is only being executed when there are Schedule Lines which already exist.
    Maybe some of you have done some extension similar to mine? Please give me advice where I should put extension.
    Thanks in advance!

    Dear Saravaran,
    Thanks for the reply.
    This will not suits to us. The provided BADI will works upto Posting the material document in transaction MIGO and it will not considered for the FI level entries.
    Hope you could have understand mine requirement.
    The requirement of mine is:
    While doing the GR with ref to PO the material documnet will be posted and subsequently FI documnet  will be  generated in Background. While generating the FI document i need to manipulate the values for the G/L. So that the manipulated values will be flow into BKPF and BSEG tables.
    Thanks.
    Regards
    Swamy

  • BADI/User exit for MIGO fi postings

    Hello Experts,
    I have one requirement regarding at the time of MIGO accounting entry is generating based on the OBYC settings,now the client want along with this entry, want to create one more FI document through background,In the background we will give the debit g/l and credit g/l.That means at the time of MIGO two FI documents has to generate one is with OBYC setting gl's and second FI entry is from programe hard coded gl's.
    For this requirement has any BADI/USER Exit.I appriciate your valuable inputs.
    Regards,
    Nivas.

    Hi,
      May I know why you need two accounting documents?
      You may refer the similar thread: BADI / Exit required for MIGO for posting FI document
      And about the number ranges - I would suggest a custom number range object and a different number range for these additional documents.
      Also refer the doc: Methods to find Customer/User Exit's & BADi's for a Transaction Code!
    Regards,
    AKPT

  • BADI/User-Exit for MD14

    Hi,
    Our client wants to update certain data in PR while the PRs are created from Planned orders or after a PR is created from a Planned order.
    I've implemented BADI MD_PURREQ_CHANGE but while testing, the debugger is not taking to the break point.
    Thus it appears that this BADI is not applicable for MD14.
    I need a BADI/User exit where I can change the material description in PR.
    Please help.Helpful answers shall be rewarded.

    Hi abhijit,
    Check this program.You will get all exits for a transaction.
    TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
    TABLES : TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
    TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'SMOD'
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
    TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Exit Name',
    21 SY-VLINE ,
    22 'Description',
    95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    LOOP AT JTAB.
    SELECT SINGLE * FROM MODSAPT
    WHERE SPRSL = SY-LANGU AND
    NAME = JTAB-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 SY-VLINE,
    2 JTAB-OBJ_NAME HOTSPOT ON,
    21 SY-VLINE ,
    22 MODSAPT-MODTEXT,
    95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE JTAB.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

  • BADI/User Exit for KE51 and KE52

    Hi Experts,
    I am searchinf for a BADI/User exit In profit center master transactions KE51 and KE52 which should trigger  when we activate the Profit center and after the data base committed as i need to send the changed profit center data to other system. 
    any ideas will be highly appreciated.
    Thanks,
    Rajinikanth

    Try
    PCA00003  Derive Partner Profit Center for External Deliveries
    EXIT_SAPLPC45_002
    EC-PCA: Activate Derivation of Partner Profit Center

  • BADI/ User Exit for transaction FTR_EDIT/FTR_CREATE initial screen

    Hi All,
    I want a BADI/User Exit for FTR_EDIT/FTR_CREATE transactions to validate company code and partner fields.
    please provide your suggestions.

    Hi,
    here is a coding example that I implemented in the BAdI FTR_TR_GENERIC. This coding is executed when the user press the check button. The method is EVT_TRANSACTION_CHECK. This example is checking the payment date dfaell if it is equal to the system date. If not then a message is sent to the message handler. Here is the code:
      DATA: faelligkeit TYPE d,
            faelligkeit_text type c length 10,
            meldungstext TYPE c LENGTH 100.
      FIELD-SYMBOLS: <it_source> LIKE LINE OF pi_proxy_transaction->a_tab_conditions.
      IF sy-uname = 'XYZ'.
    *    BREAK-POINT.
        READ TABLE pi_proxy_transaction->a_tab_conditions INDEX 1
          ASSIGNING <it_source>.
        faelligkeit = <it_source>-dfaell.
        CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
           EXPORTING
             DATE_INTERNAL                  = faelligkeit
           IMPORTING
             DATE_EXTERNAL                  = faelligkeit_text
           EXCEPTIONS
             DATE_INTERNAL_IS_INVALID       = 1
             OTHERS                         = 2
        IF sy-subrc <> 0.
           MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        IF faelligkeit <> sy-datum.
          CONCATENATE 'Fälligkeit' faelligkeit_text 'incorrect' INTO meldungstext separated by space.
          CALL METHOD pi_proxy_messages->set_message
            EXPORTING
              pi_message_id       = 'T0'
              pi_message_number   = '101'
              pi_message_severity = 'E'
              pi_message_var1     = meldungstext
            EXCEPTIONS
              OTHERS              = 4.
        ENDIF.
      ENDIF.
    It is not a really nice coding but it shows in a simple way how to use the BAdI.
    Regards
    Robert

  • BADI/ User Exit for transaction FTR_EDIT/FTR_CREATE

    Hi All,
    I want a BADI/User Exit for FTR_EDIT/FTR_CREATE transactions to validate company code and partner fields.

    Hi,
    here is a coding example that I implemented in the BAdI FTR_TR_GENERIC. This coding is executed when the user press the check button. The method is EVT_TRANSACTION_CHECK. This example is checking the payment date dfaell if it is equal to the system date. If not then a message is sent to the message handler. Here is the code:
      DATA: faelligkeit TYPE d,
            faelligkeit_text type c length 10,
            meldungstext TYPE c LENGTH 100.
      FIELD-SYMBOLS: <it_source> LIKE LINE OF pi_proxy_transaction->a_tab_conditions.
      IF sy-uname = 'XYZ'.
    *    BREAK-POINT.
        READ TABLE pi_proxy_transaction->a_tab_conditions INDEX 1
          ASSIGNING <it_source>.
        faelligkeit = <it_source>-dfaell.
        CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
           EXPORTING
             DATE_INTERNAL                  = faelligkeit
           IMPORTING
             DATE_EXTERNAL                  = faelligkeit_text
           EXCEPTIONS
             DATE_INTERNAL_IS_INVALID       = 1
             OTHERS                         = 2
        IF sy-subrc <> 0.
           MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        IF faelligkeit <> sy-datum.
          CONCATENATE 'Fälligkeit' faelligkeit_text 'incorrect' INTO meldungstext separated by space.
          CALL METHOD pi_proxy_messages->set_message
            EXPORTING
              pi_message_id       = 'T0'
              pi_message_number   = '101'
              pi_message_severity = 'E'
              pi_message_var1     = meldungstext
            EXCEPTIONS
              OTHERS              = 4.
        ENDIF.
      ENDIF.
    It is not a really nice coding but it shows in a simple way how to use the BAdI.
    Regards
    Robert

Maybe you are looking for