BADI WorkOrder Update - IN_UPDATE

Hi
I am looking at outputing equipment data (equipment number and description) held in the Objects tab in the Order screen (transaction IW31/32).
Does anyone know if this data is held in any of the structures within the IN_UPDATE badi.
Many thanks.
Regards
Daniel Jones

Hello Daniel,
behind the objects tab in Order Screen is the table OBJK.
But that one is not in the interface of the BADI - maybe because it's specific PM related table.
What in the interface of the BADI is the field OBKNR (in Header data) - that's the key to table OBJK.
Maybe there's a problem: at the runtime of the BADI maybe no entry in table OBJK (IW31) or the old entry (IW32), because the commit maybe later.
So it could be necessary to write a function that run's in the deferred posting (V2).
Best regards
Wolfgang

Similar Messages

BADI For updating BP in CRM

Hi Experts,
I am looking out for a BADI to update the BP through transaction BP before saving it.
I found couple of them which get triggered but any changes made in these BADIs are not to be seen in the transaction after saving.
1. ADDRESS_UPDATE and
2. BUPA_ADDR_UPDATE.
Please suggest me how to proceed as I am blank at the moment. Please answer me as soon as possible as it is an urgent issue.
Maximum Points will be rewarded.
Thanks in advance.

Hi Gautham,
No good, It did not help me Gautham.
Can you please suggest me some other way of dong it.
I have 2 badis to use one is address_update and the other is addres_check.
I implemented address_check which had a address structure as a changing parameter and I update it there, it works absolutely fine.
But my requirement is to update the structure based on the condition of BUT000. That is the BUT000-type, which means I need to update the structure only for person and not for organization and group.
so in the badi address_check i need the BUT000 details, which I am not able to trace even from the local memory as I am getting the error saying "Memory is not yet instantiated"
and If i use the other badi address_update.
I have the problem the other way round here. I have all the BUT000 details here I can put the condition to update only for person, but I am not able to update the address structure.
Please help me. This is required very urgent.
Maximum points will be rewarded.
Thanks in advance.
Arul.

Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

Hi All,
I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
Thanks,
Sudha

Hi,
Are you saying first create notification,then service order
and then Sales order.
But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
Thanks & regards,
chetan.

User Exit or BADI for Updating Tax code (MWSKZ) using ME21N

Hi all,
I am trying to fin out an exit or badi for Updating Tax code (MWSKZ) and Unit of Measure in transaction ME21n.
The scenario is like this...
For Purchase Orders Tax code will be defaulted from Purchasing info record or contract or parameter id for that item-vendor-plant.
If the Tax Code is not defaulted and account assignment is blank then tax code on the PO is updated according to the below mentioned table
Table
Supplying Plant/              Receiving Plant                      Tax code
Vendor/Country
Any plant/vendor/
country                           5050(NA)                               20
2300                              6700                                     E0
If the tax code on PO cannot be updated by the above table, then buyer needs to put tax code on the purchase order manually.
Thanks,
Shiva, Bangalore

Hi Siva.,.,.,
These r the exits.,..,which will be called while calling ME21N/ME22N/ME23N
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
EXIT_SAPMM06E_009
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
EXIT_SAPMM06E_018
U want to default some values while the Initial screen will come right,
while u Enter ME21N in command Prompt.,.,two exits will get triggerd,
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
If u want to Default some values u can use these two exits.,.
Try using EXIT_SAPMM06E_016.,.this will solve ur purpose.
and if the user changes some values on screen.,,and you want them to get reflected .,.,.that means if user changes and saves data .,.
While saving.,.,EXIT_SAPMM06E_012 and EXIT_SAPMM06E_013 will get triggerd
Try using EXIT_SAPMM06E_013.,,.it was somehow the same requirement as mine.,.,IN my case it worked fine.,.,
Regards
Debasish
Message was edited by:
        Debasish Das

Bad performance updating purchase order (ME22N)

Hello!
Recently, we face bad performance updating purchase orders using transaction ME22N. The problem occurs since we implemented change documents for a custom table T. T is used to store additional data to purchase order positions using BAdIs ME_PROCESS_PO_CUST and ME_GUI_PO_CUST.
I've created a change document C_T for T using transaction SCDO. The update module of the change document is triggered in the method POST of BAdI ME_PROCESS_PO_CUST.
Checking transaction SM13, I recognized that the update requests of ME22n have status INIT for several minutes before they are processed. I also tried to exclude the call of the update module for change document C_T (in Method POST) - the performance problem still occurs!
The problem only occurs with transaction ME22N, thus I assume that the reason is the new change document C_T.
Thanks for your help!
Greetings,
Wolfgang

I agree with vikram, we don't have enough information, even not a small hint on usage of this field, so which answer do you expect (The quality of an answer depends ...) This analysis must be executed on your system...
From a technical point of view, the BAPI_PO_CHANGE has EXTENSIONIN table parameter, fill it using structure BAPI_TE_MEPOITEM[X] alreading containing CI_EKPODB (*) and CI_EKPODBX (**)
Regards,
Raymond
(*) I guess you have used this include
(**) I guess you forgot this one (same field names but data element always BAPIUPDATE)

ABAP-HR Name of the BADI which updates merit salary in infotype 759 and 15.

Hi Friends,
 I want the name of BADI which updates merit lump sum in infotype 15 .
Example 1.
 Employees base pay = 34,000
 Merit increase amount = 1,500
 Employees Salary Range = 25,000 35,000.(This is taken from T710)
IT0759 STXX Pick-up subtypes related to the following plans (MSST, ,MSWH, MSPA, MSAN) = 1,000
IT0015 ST E408 Merit Lump Sum = 500.
In the above example out of 15000(Merit increase amount). 1000 will get updated
in infotype 759. and 500 wll be updated in Infotype 0015.
Question. Which enhancement does this operation. there is BADI called HRPAD00INFTY but this can update only one infotype at one point of time
because new_innnn-infty is a structure which holds only one Infotype at run time.
I would be greateful for this information.

Hi,
 Try HRECM00_GDEGP
other way
Implement this BAdI HRECM00_CONSISTENCY in SE19 & put your validations in the method CHECK_CONSISTENCY .. You will have to use the function module HR_ECM_ADD_MESSAGE to fill your messages & show it on the front end
Reward points
Regards

Wy my battery life in my blackberry Z30 is very bad after updating to new os 10.3.1.156

Dear blackberry
Wy my battery life is very bad after updating to new os 10.3.1.1565
Before update the battery life it was better... please help me regarding this matter. My device is Z30 and I love it very much . Please help me.
Kind regards
Abdulrahman.

zenesa wrote:
Dear blackberry
Wy my battery life is very bad after updating to new os 10.3.1.1565
Before update the battery life it was better... please help me regarding this matter. My device is Z30 and I love it very much . Please help me.
Kind regards
Abdulrahman.
Hi @zenesa! Welcome to the BlackBerry Support Community Forums!
When did you perform the update?
The phone needs a few days for the OS to settle and sync your data, It's normal for the first few days to shed battery life faster than normal.
Don't forget to read this helpfu article about BlackBerry 10.3.1 Battery Tips (Battery Saving Mode is a great feature)
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Badi to update PS-MM screen

hi all,
is there any badi can update from PS screen to MM table : aufk to eban..
i know that cmod CNEX0016 can do this enhancement as table COCI_AUFK is meant for table PS-MM..
but am keen on using badi, i tested WORKORDER_UPDATE and it can't be used to update eban table..kindly advice..
thanks

Hi Ester,
Try using this BADI.
ARC_MM_EBAN_PRECHECK
Regards,
Deepthi Reddy

Is it bad to update software to your mac

Is it bad to update software to your mac and is it using up memory every time you update?

HI Alex...
No. Quite the contrary. It's very important to keep your system software up to date.
I don't think you mean memory but hard disk space. You can check to see how much free space there is on the startup disk.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.

User exit / BADI for updating STO when change in subcontracting PO

Hi
The requirement is to update the STO (stock transfer order ) when their any change in subcontracting PO at item level. Is there any exit or BADI available where STO quantity and delivery date will be updated after any change in PO at item level ?
Thanks
Manas

Deepak, Exits for MB1B are
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.

Exit/Badi for Updating Actual Start Date in CJ20N

Dear Experts,
In transaction CJ20N, under Dates Tab for a particular Activity, there is one field viz. Act i.e. Actual start: Execution (date). My requirement is to display PR date in this field. Besides this, Actual finish: Execution (date) should also get updated depending on the Duration field.
I searched all the exits in the package 'CN' and 'CORU', but none of them seems to be useful
Please suggest a user exit/BAdI which could help resolve this.
Thanks in advance

Hi,
That BADI would trigger when you change any thing on the WBS and hit save.
WORKORDER_UPDATE-for network
Regards,
Himanshu

BADI for Updating work order component data

Hi,
I need to update the field special stock indicator for the work order component data when it is saved. I am using the BADI WORKORDER_UPDATE for the same, but when I implemented the ZWORKORDER_UPDATE_IM using the standard defenition WORKORDER_UPDATE , the code does not allow me to change the it_component internal table belonging to the BEFORE_UPDATE method. Could you please help me in this.
Basically if we are implementing a standard defenition how to change the parameters of the methods in it.
Regards,
Prabaharan.G

Hi ,
It is giving the below dump. The parameter is importing parameter and it does not allow to change even using field symbol. Is there any other way. Is there an user exit which will be called when pressing enter button in component screen. The exit EXIT_SAPLCOBT_001 did not work for this.
Error analysis
 The program tried to assign a new value to the field "<F_FS1>" even though
 it is protected against changes.
The following objects are protected:
 - Character or numeric literals
 - Constants (CONSTANTS)
 - Parameters of the category IMPORTING REFERENCE for functions
 and methods
 - Untyped field symbols to which a field has not yet been assigned
 using ASSIGN
 - TABLES parameters if the corresponding actual parameter is protected
 against changes
 - USING reference parameters and CHANGING parameters for FORMs if
 the actual parameter for this is protected against changes
Regards,
Prabaharan.G

BADI for updating changing output medium in PO

Hi,
 Is there any BADI or exit present for updating the output medium in PO , based upon some criteria ?
 In my requirement I want to make output medium as 'email' and set email address to email ID of one of the partner function maintained in PO.
Thanks and Regards,
Amit R

Hi
At runtime, you will get the GUID in the BADI Interface.
Incase this BADI does not help, go for another BADI
1) BBP_SEND_MEDIUM_MODE
(Determines the Default Settings for the Send Medium)
2) 'BBP_OUTPUT_CHANGE_SF'.
Here are some related links ->
Re: PO output medium issue
Re: SRM PO SMARTFORM
Re: Control PO output to vendor
Re: Add a Printer ? -> LP01
Hope this will help.
Regards
- Atul

USER EXIT or BADI to update the field in trx. ME41

Hi guys,
My requeriments is update the field EKKO SUBMI of record when the trx. ME41 but can not find how to do it, the BADI ME_PROCESS_CUST the method POST not allowed me to meet user and not allow the update the field.
Please help ...
Thanks.

Hi Ramana,
Go to SPRO Transaction and follow the below path
Customer relationship management>Transactions>Settings for Service Processes>Business Add-Ins and you will find 8 BADI's.
Check these BADI's useful for you.
Regards,
Lijo Joseph

User Exit or BADI to update the service order in R/3

Hi,
When creating a service order the following fields need to be populated automatically using an user exit or badi.
1. Planner Group
2. PMActType Plant maintenance activity type
3. Cost/Profit Centre
4. WBS element
5. Work center
so my requirement is there any function module or Badi or user exit to update the service order details when service order is created / changed.
Pls do the needful.
Reg
Ramana

Hi Ramana,
Go to SPRO Transaction and follow the below path
Customer relationship management>Transactions>Settings for Service Processes>Business Add-Ins and you will find 8 BADI's.
Check these BADI's useful for you.
Regards,
Lijo Joseph

BADI WorkOrder Update - IN_UPDATE

Similar Messages

Maybe you are looking for