Badly needed please help.
i dont have browser configuration service book entries. how can i enable browser on my blackberry 8520?
Hi,
To resend service books to a BlackBerry smartphone, complete the following steps (BlackBerry Device Software 5.0 and earlier):
On the BlackBerry smartphone Home screen, click the Email Settings icon. If running BlackBerry Device Software 4.5 - 5.0, the Email Settings icon may be located in the Setup folder.
If prompted, type the username and password, and then click Log In.
On the main screen, click Help.
Click Send Service Books.
Click OK in the confirmation window.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit
Similar Messages
-
My iphone5 was stolen.. pls help how to deactivate it? badly need your help..
My iphone5 was stolen.. i was slept on the bus, pls help how to deactivate it? badly need your help.. its only two months on me
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
Macbook air adapter heats up really bad ! please help
Hello Folks !!
This is Jan and i purchased macbook air 11 inch 64 gb ultrathin laptop 2 months back. i use this laptop for watching youtube videos or occasional skype chat with family and friends and each day i dont use my laptop for more than 4 hours.
Yesterday i was watching youtube video and after 2 hrs, the adaptor got so hot and i was afraid and pulled power and switched off laptop.
Are thare any macbook air adaptor knows issues and why my macbook air adaptor heats up really bad ?
Please help me resolve my issue with macbook air adaptor.
Please help.
Thanks
JanThe power adaptor will always get a little warm or even hot during use.
How hot did it get? Was it smoking, melting, or discoloring?
If not, then that little bit of heat is usual and you shouldn't worry about it too much.
Hope this helps,
NWB1 -
Hi,
We have an application that has 2 database tables that hold presentation information as:
Table :- screens_info
Contents of a record :- what is the background color , title , link colors etc. for a screen in the application
Table :- tables_info
Contents of a record :- what is the format of a column of a table that needs to be displayed such as heading , data-type , textbox/listbox etc. , needs to be presented in presentable version , width
I was thinking for a java solution and use XML instead of database presentation tables. There will be multiple XSL and XML for this presentation info.
I need to justify this approach to my colleagues.
Here are some points:
FOR -->
1. Database is not a good way for storing presentation info. whereas XML is
2. Later on we can change it easily if required as well as talk more effectively with other applications ( which is our need in near future )
3. For each screen load and reload , we need not access database presentation tables. Improves performance
Against -->
1. It's fine for saying not to store the data in database , but ultimately we have to access the XML and the files etc.
2. I am planning to use XSQL servlet from Oracle that basically will handle the query execution part and return a proper output as I am going to specify with a stylesheet
This poses a danger in case tomorrow we plan to deal with some other database than Oracle. So instead of that I can go for java beans and XMl parsers.
I am not able to exactly specify the advantages of storing presentation info. in XML.
Please guide me and correct if I am wrong. I badly need help on this decision.
Thanks
-kgHi Steve,
That's a good point.
Related question is as I am going to use XSQL servlet, if we shift tomorrow some other database than oracle , XSQL servlet is of no use I guess and I should go for parsing and all by myself. Isn't it?
But can you tell me the major advantages of using XML in my case?
Thanks-
Kirti -
How can I call a ABAP proxy class from BADI? PLease help
hi Experts,
I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
GopalHi,
You can call a method of a class from BADI. Here are the steps.
1) In the BADI implementation create a object for the proxy class.
2) Call the Execute_Synchronous method.
You can define a BADI by using SE18 and you can implement it by using SE19.
Sample code...
================================================
METHOD ZIF_EX_VBADI~CONVERTUPPER.
DATA: OBJ TYPE REF TO ZTESTCLASS.
DATA: IT_DATA TYPE ZIN_MT,
IT_RES TYPE ZOUT_MT,
SEXCEPTION TYPE REF TO CX_AI_SYSTEM_FAULT.
TRY.
CREATE OBJECT OBJ
EXPORTING
LOGICAL_PORT_NAME = 'TESTPORT'.
CATCH CX_AI_SYSTEM_FAULT INTO SEXCEPTION.
ENDTRY.
ENDMETHOD.
================================================
Thanks,
Vivek LR -
How to call a ABAP proxy class from a BADI? Please help!
hi Experts,
I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
GopalHi Gopal,
Check this out
DATA: ref_obj TYPE REF TO zmfg_production_ord.----> BADI
* Instantiate the proxy class
CREATE OBJECT ref_obj.
TRY.
CALL METHOD ref_obj->execute_asynchronous
EXPORTING
output = it_output. "Output Structure
COMMIT WORK.
CATCH cx_ai_system_fault INTO ref_sysexception.
ENDTRY.
IF ref_sysexception IS INITIAL.
WRITE : / 'Error Message'.
ENDIF.
Edited by: Raj on May 28, 2008 4:52 PM -
i am new to premiere pro, i recently edited a whole short film, effects, music, everything, but it will not give me an option to export. the only export options are: AAF and FINAL CUT PRO XML, can anyone please help me figure out how to fix this? i really dont think i can remake this project! and its due by the end of the week! i need to export as a regular avi/movie file, to upload to youtube and send in an email and burn on a disk. ive tried a few things, including searching online for answers but i havent had any luck on my own. please please help!
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help
-
502 Bad gateway PLEASE HELP ASAP
I updated one picture on my website and published the changes. I got a message "502 Bad gateway" My website is not live NOW!! Please help me asap [email protected] 908-405-5722
WHAT???? I have to be notified when Shi%T like this happens…. This is not fair. I would have not uploaded anything and left it the way it is until your issues was resolved. When do you think you will have a resolution??
Don't forget to LIKE US or follow US ON FACEBOOK!
http://www.facebook.com/mywaycarpetandflooring
Sincerely,
Sam "The Carpet Man"® Ghanim
President of Sales
My Way Carpet Floors And More!
Our motto is that the customer, you, are "always right." Your way is "My Way”
Office: 877-Go-My Way
Office: 877-699-2922
Mobile: 908-405-5722
Fax: 908-756-4040
Email: [email protected]
Corporate Office:
3373 South Clinton Ave.
South Plainfield, NJ 07080
If you would like to set up a free no-obligation estimate, Please call My Way Carpet Floors And More (our office) at 1-877-466-9929 between 9:00 A.M. and 5:00 P.M ET Monday-Saturday
P.S.- Do not keep us a secret!
If you love our services, please refer us to anyone who may benefit from the exceptional service we provide.
Please visit our "website" for a list of services we provide!
Website: www.MyWayCarpet.com -
Simple button rollover effect help needed - please help!
Hi everyone,
I was hoping someone could tell me how was this rollover
effect done - can be seen on the small map on the right:
http://www.refinery29.com/
What I want to do is to be able to have the same effect on
rollover and rollout just reversed (fade in - fade out).
Please help!!
THANKSquote:
Originally posted by:
NedWebs
That naming at both ends is something I consider a fluke in
Flash's design, but only because I don't know why it won't work the
way you probably had it.
There's probably some logical explanation, but I haven't
found it, just the solution for when it happens
It's such a minor little detail. I suspected it would be
something this small, as that's usually the case, but I just
couldn't put my finger on it. Not one of the places I researched
made any reference to that when they said to name the instance of
the button. How stupid.
Anyway, thank you again. I can finally move forward. This was
driving me mad. -
Fios Internet connection is very bad! Please help!
Hello,
I play an online game called Final Fantasy XIV. I use a program called WTFast in order to have a solid gaming experience, one without or very little lag or disconnects.
Recently, within the last 3-4months, I have noticed I get EXTREME lag and DISCONNECTS. I contacted WTFast with a tracert that they analyzed, and here is their response:
"Your internet connection is very bad. There is a "plateau" spike. This will cause WTFast to spike as well, and for such a long "spike" it is not surprising that the connection was dropped.
The previous report showed a very unstable internet connection as well (the one where you got a 30 second freeze).
Present the same reports you sent to us to your ISP (Verizon FIOS) and ask them to try to make their connection better. The report will help them see the quality of the current connection."
Here is the information in the more readable form (except for the last four as I figured you would probably get the idea by then). Yes, 4 shows 100% packet loss, so the connection dropped then. Also, in 5 the standard deviation is high (16.35 ms) which indicates a huge fluctuation in the signal. The flux column also shows large numbers, which indicates a large variance in the signal speed. Finally, there are a lot of hops just within the ISP, ie rows 2-8, and all this data is for the ISP itself, not the WTFast connection. In fact, that connection is the last one, and there you can see good numbers. Hope this helps.
015-02-25 00:09:36
Hop Name No. Loss % Sent Received Best (ms) Avg. (ms) Worst (ms) Last (ms) Spikes Flux (ms) Std.Dev (ms)
Wireless_Broadband_Router.home 1 0.00 497 497 0 0 12 0 0 0 1.67
lo0-100.PHLAPA-VFTTP-304.verizon-gni.net 2 0.00 497 497 3 8 84 7 4 72 8.39
T1-1-0-5.PHLAPA-LCR-21.verizon-gni.net 3 0.00 497 497 4 8 19 9 0 0 2.51
—— 4 100.00 —— —— —— —— -1 —— —— —— 0.00
0.so-6-0-1.XL3.IAD8.ALTER.NET 5 0.00 497 497 10 19 137 12 12 92 16.35
TenGigE0-6-0-4.GW1.IAD8.ALTER.NET 6 0.00 497 497 11 18 50 18 0 0 4.68
teliasonera-gw.customer.alter.net 7 0.20 497 496 12 24 43 27 53 30 3.80
cloudflare-ic-309918-ash-b2.c.telia.net 8 0.00 497 497 10 14 46 13 0 0 3.04
Target WTFast.com 9 0.00 497 497 9 12 25 12 0 0 1.94
February 25, 2015, 11:56
I did a tracert from my computer to sites like MSN.com; Verizon.com etc, and EVERY SINGLE 4 shows a 100% loss. I did the same tracert from my computer at work that uses a different IP provider, and those same sites show a response from 4.
Can anyone help me out with this please! Thank you for reading!bap4201 wrote:
I'm trying to, but can't seem to format it properly
Open a command prompt and enter the tracert command
then select the cmd prompt icon - top left of the cmd prompt window
select edit, mark
highlight the data you want to copy - the tracert data
select the cmd prompt icon again
select edit copy
put the cursor in the post window in the forum
and hit ctrl-v - as below
C:\Users\Peter>tracert wtfast.com
Tracing route to wtfast.com [190.93.243.228]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms Westell [192.168.1.1]
2 3 ms 2 ms 3 ms L101.BSTNMA-VFTTP-66.verizon-gni.net [96.233.107
.1]
3 7 ms 6 ms 6 ms G102-0-0-3.BSTNMA-LCR-22.verizon-gni.net [100.41
.212.48]
4 3 ms 3 ms 3 ms so-5-0-0-0.BOS-BB-RTR2.verizon-gni.net [130.81.1
51.220]
5 11 ms 12 ms 10 ms 0.ae11.XL4.NYC1.ALTER.NET [152.63.20.117]
6 * * * Request timed out.
7 37 ms 28 ms 43 ms 3.et-2-0-1.TL2.NYC1.ALTER.NET [140.222.227.34]
8 20 ms 21 ms 23 ms TenGigE0-7-0-1.GW5.NYC4.ALTER.NET [152.63.17.66]
9 12 ms 10 ms 11 ms teliasonera-gw.customer.alter.net [152.179.163.1
78]
10 13 ms 13 ms 11 ms nyk-bb2-link.telia.net [213.155.130.244]
11 11 ms 11 ms 12 ms nyk-b2-link.telia.net [213.155.130.30]
12 12 ms 17 ms 19 ms cloudflare-ic-309915-nyk-b2.c.telia.net [62.115.
52.174]
13 11 ms 12 ms 11 ms 190.93.243.228
Trace complete. -
Hey Everyone,
Let me lead with my system specs. If you need more info, please let me know and I'll be happy to supply them. I'll be sitting by my computer all night, glaring at my Snow Leopard Install Discs and hoping that you guys don't say that the only thing left to do is a clean install of SL, then re-upgrade to lion.
So, a few months ago, I noticed that certain components on websites wouldn't work. They would be pretty basic - simple buttons at first. Then certain submission forms wouldn't process. Then, recently, there has been a complete loss of video playback on certain websites. And the final straw, the Vuze software update button will not click through.
In order to work around these browser break downs, I've had to launch Linux/Windows 7 or 8 (depending on wether or not I wanted to make myself even MORE frustrated by using metro) to do my web browsing.
Here are a few examples. Again - ALL these websites work in other operating systems.
Groupon - via http://www.groupon.com/subscriptions/new?division_p=philadelphia
The "Continue" button does not function. It will depress on click, and highlights on mouseover, but it will not lead to the next page.
A Picture is Below.
Math Warehouse - via http://www.mathwarehouse.com/quadratic/quadratic-formula-calculator.php
This site houses a calculator for the quadratic formula and other nerd tools - but essentially, just a standard forms with fields. Clicking the "Solve the Quadratic Equation" button does not work. In fact, in this case, mousing over causes the pointer to turn into a text curser.
Picture below.
Vuze - Internal App
Clicking this button does nothing. Nothing at all.
I've posted a similar thread when this first happened, where I included activity monitor and consol logs, but no one could make heads or tales of them. one guy even said there was nothing wrong.
i know steve jobs said that macs were the best hardware around for running windows. I don't think that this is what he meant.
Any and all help, is really, really appreciated.
Thank you,
BernieHey Everyone,
Let me lead with my system specs. If you need more info, please let me know and I'll be happy to supply them. I'll be sitting by my computer all night, glaring at my Snow Leopard Install Discs and hoping that you guys don't say that the only thing left to do is a clean install of SL, then re-upgrade to lion.
So, a few months ago, I noticed that certain components on websites wouldn't work. They would be pretty basic - simple buttons at first. Then certain submission forms wouldn't process. Then, recently, there has been a complete loss of video playback on certain websites. And the final straw, the Vuze software update button will not click through.
In order to work around these browser break downs, I've had to launch Linux/Windows 7 or 8 (depending on wether or not I wanted to make myself even MORE frustrated by using metro) to do my web browsing.
Here are a few examples. Again - ALL these websites work in other operating systems.
Groupon - via http://www.groupon.com/subscriptions/new?division_p=philadelphia
The "Continue" button does not function. It will depress on click, and highlights on mouseover, but it will not lead to the next page.
A Picture is Below.
Math Warehouse - via http://www.mathwarehouse.com/quadratic/quadratic-formula-calculator.php
This site houses a calculator for the quadratic formula and other nerd tools - but essentially, just a standard forms with fields. Clicking the "Solve the Quadratic Equation" button does not work. In fact, in this case, mousing over causes the pointer to turn into a text curser.
Picture below.
Vuze - Internal App
Clicking this button does nothing. Nothing at all.
I've posted a similar thread when this first happened, where I included activity monitor and consol logs, but no one could make heads or tales of them. one guy even said there was nothing wrong.
i know steve jobs said that macs were the best hardware around for running windows. I don't think that this is what he meant.
Any and all help, is really, really appreciated.
Thank you,
Bernie -
Bridge exe. Bad Image, Please help!
My bridge program will not open. It had been working in the past, but now I get the message "Application or DLL:\Program FilesAdobe\Adobe Bridge CS4\libaray8n28.dll is not valid windows image. Please check against your install diskette." Do I need to uninstall and reinstall CS4? all the disks? what do I need to do? Any help is very much appreciated. Thank you, Jan
This is an old CS2 Tech note but at least it mentions libagli18n28.dll.
http://kb2.adobe.com/cps/328/328349.html
This may also help: http://pcsupport.about.com/od/findbyerrormessage/a/libagli18n28-dll-not-found-missing-erro r.htm
Google is your friend! -
Messed Up BAD need DESPERATE HELP
My computer died a week ago, I rebuilt it and put in Final Cut Pro. My movie which is on a Lacie Drive worked great till tonight when it said I ran out of memory (my new HD has 250 gigs unused and my Lacie has over 25 gigs unused). Anyway in SYSTEM SETTINGS I set a new place for my work. Now I can't open any of my Lacie Drive files which contain my movie.
I think I have to reset the SYSTEM SETTINGS to where they were originally but I don't remember where they were.
What do I do? I have so much work to do on this movie and I'm at a loss. It's driving me liteally insane!
Thanks: GeorgeGood Lord, the different between memory AND hard drive storage...
We're talking basic computer... no VERY basic computer knowledge here.
Print this... hold it in your hand. OK got it?
Now,
Close all the programs, everything.
Click the Apple up there on the left.
A box will come up.
Look in the box. (The box will have a GREAT BIG Mac OSX in the middle.
Under that it will say Version _________ (should say 10.4 - and another number, something like probably 8, 9 or 10.
Under that will be PROCESSOR... and then
MEMORY if it reads any less than 2 GB you don't have enough. If it reads 4 or more... you have about enough....
This is the RAM - Random Access Memory, what the computer uses to run all of the programs. What Final Cut Pro uses to run itself, capture video, edit video, display video and render video.
When Final Cut Pro has enough RAM memory to do all of these things, it will quietly perform its duties and give you nice video just as you asked for.
When Final Cut Pro does not have enough RAM it will send you a message "OUT OF MEMORY". What this mans is, Final Cut Pro can not complete the request you made of it without having more memory. Either your machine is maxed out on memory, in which case you cannot do everything you asked Final Cut Pro to do in one request... or you are a cheapskate and need to buy more memory for your computer.
No offense, all our computers have told us we are cheapskates many times over the years.. Final Cut Pro requires lots of memory. Editing Video requires lots more memory. If you will note the bottom of my reply you will note I have 4 Gigs of memory in my G5. Often that is not enough to do everything I want to do in real time. I have decided not to reward my box with more memory but to endure the messages and save my money for a new Intel box....
Bottom line is: More memory is a choice. You'll always need more.
Forgot to explain the difference:
Hard drive space is simply storage.. like a drawer in your desk.. when it gets full you empty it.. if it's not full you can stuff more stuff in it. Do not let your system drive get more than 85 to 90 percent full. That's the drive with with OSX and FCP on it. it will run slow.. maybe even run less than slow...
Same with your scratch disk.. that's the disk you capture video and audio to. It should never be the same as the system disk. Bad news, bad stuff, bad decision, bad, bad, bad....
Hope this helps explain the difference between memory and storage.
Message was edited by: John Criswell
Message was edited by: John Criswell -
Urgent help needed, please help me
Hi,
I am developing a web site using Java Servlets. The site requires to send XML as POST to an HTTPS server and get the response.
Development environment:
Laptop running Windows XP with jdk1.3.1, j2sdkee1.3 and Tomcat 4.1.
Since I need to use https request from the servlet, I am using the following code;
URL url = new URL("https://www.somesite.com");
HttpsURLConnection connection = (HttpsURLConnection) url.openConnection();
To use the above code I downloaded the jsse1.0.3_03 package from the sun website and added the three jar files to the appropriate location. Also edited the java.security file.
The program compiles and when deployed to the web server, it works great.
Now the problem;
I need to deploy the web site in a server that is connected to the internet. This server is running Windows 2000 Server. It has the same jdk1.3.1, j2sdkee1.3 and Tomcat 4.1. Also I added the three jar files from jsse1.0.3_03. I also updated the classpath in the environment variable accordingly.
Everything is pretty much similar to the Laptop that I use to develop the site except that the OS is Windows 2000 Server.
But when I deployed the class files to the web server and tested the site, the servlet gave the following error:
"unknown protocol: https"
What could be wrong? I really need to fix this issue as soon as possible and any input from you will be highly appreciated.
Thanks in advance,
RajeshHi,
I used java class as beans and added to JSP page as follows (the code is not complete, I am just giving the parts that are relevant);
login.java: Implementation of login to access the database
*through JDBC. Uses MySQL.
Last Modified: 03.22.03
package user;
import java.sql.*;
import java.util.*;
public class login
private static Statement statement;
private static Connection database;
private static String jdbcDriver = "org.gjt.mm.mysql.Driver";
private static String source = "jdbc:mysql://127.0.0.1/user";
private static String username = "user";
private static String password = "passwordforuser";
Constructor for initializing the connection to the database
public login()
try
Class.forName(jdbcDriver);
database = DriverManager.getConnection(source, username, password);
statement = database.createStatement();
catch (Exception e)
System.out.println("Error (From loginDatabase Constructor): " + e.getMessage());
Used to check the users
public String checkUser(String userName, String passwd) throws Exception
try
ResultSet names = statement.executeQuery("SELECT username, passwd FROM users");
while (names.next())
return "success";
return "wronguser";
catch (Exception e)
throw e;
<!--*********************************************************************************
login.jsp: Server page to process the login request. Uses login.class to
*add / login users.
Last Modified: 03.23.03
**********************************************************************************-->
<%@ page import="user.login" %>
<jsp:useBean id="login" scope="page" class="user.login" />
<jsp:setProperty name="login" property="*" />
<html>
<head>
<title>Login</title>
</head>
<body bgcolor="#3366FF" link="#000000" vlink="#000000" alink="#000000">
<table border="0" width="100%" cellspacing="0" cellpadding="0">
<tr>
<% //Login the user and display the status
String loginResult = login.checkUser(request.getParameter("username"), request.getParameter("password"));
if (loginResult.equalsIgnoreCase("success"))
%>
<h1 align="center">You are successfully logged to the Server!</h1>
<%
%>
</tr>
</table>
</body>
</html>
Hope that helps...
Good luck!
Rajesh -
Easylink advisor link or software needed please help me
i need the software for the linksys easylink advisor for the router wrt54gs version 6. i have 2 computers at my house and the one that had all my router information officially broke ( i saw it coming it was 10 years old and i did not take care of it well) i disconnect my ps3 from my house and took it elsewhere and now that im back i cant reconnect it to my router its frustrating and lapotops cant be used either because i dont know my WEP code please if anyone would liket o giv me a link to the software for the easylink advisor for my router and version that would be tremendous and i would greatly appreciate it.
http://update.linksys.com/lela/install/lela.exe
From Chris
Linksys Wireless-G WAG54GS ADSL Gateway
Newlink Wireless 11g 54Mbps PCI card worked with Windows 7 64-bit
Maybe you are looking for
-
Error while posting billing docs in COPA
Here is the error . In Profitability Analysis, an attempt was made while valuating with material costing to read for material "vrtest a standard cost estimate released on posting date "09/08/2011". The system has discovered that there are no error-fr
-
How to create the ini file for java programms
hi all, I have one problem that is ... In my project I am using the JDBC connection ... in this I am connecting different connections (means differenet usernames and passwords)... for this evrey time I have to change the username and password in the
-
Inserting an attribute to a specific node
Dear All, am a bit new to xml and was hoping to get some help on this task am trying to complete. Using PL/SQL am generating xml of a query through Dbms_Xmlgen.Getxml. my returned result looks something like this <?xml version="1.0"?> <ROWSET> <ROW>
-
Hi All I want to upload vendor transaction through T code: F-43, with tax items Could you help me in the following points: 1. Fields to be taken in Structure 2. How to handle the WHT and Tax as these are automatically deducted during the posting 3.
-
Vimperator and persistent buffers window
I was wondering if the persistent buffer feature was working for anyone here: :buffers[!] B Show a list of all buffers (=tabs). The special version :buffers! opens the buffer list in a persistent preview window. Call the special version of this comma