Baffling problems with letter key and erratic keybinds

I'm not even certain how to explain my issue. I was in the middle of typing an explanation to a friend in IM when I discovered that any attempt to press 'v' key resulted in a copy/paste of the URL I had attempted to send to him before. I checked to see if either of the keys included in the copy/paste keybind were somehow stuck, but the command key initially appeared to be operating normally; it was only that particular letter key that posed a problem. After restoring the default keyboard settings, turning off all of options in the 'speech' toolbar, and updating my software, I found that my computer would now paste text if I pressed either my v OR the command key on the left of the space bar. I could also occasionally type a normal letter if I held down my left click. I'm a bit baffled. Is this a sign of a dying keyboard, or..?

Is this in Leopard or on the iBook G4 Mac OS X (10.4.2) = Tiger computer?
Does it do this if running in Safe Mode (hold down shift key while starting, be very patient)?

Similar Messages

Problem with Enter key and JOptionPane in 1.4

Hi,
I had a problem with an application I was working on.
In this application, pressing [Enter] anywhere within the focused window would submit the information entered into the form that was contained within the frame.
The application would then try to validate the data. If it was found to be invalid, it would pop up a JOptionPane informing the user of that fact.
By default, pressing [Enter] when a JOptionPane is up will activate the focused button (in most cases, the [OK] button) thus dismissing the dialog.
In JDK 1.3 this worked fine. But in JDK 1.4, this has the result of dismissing the dialog and opping it up again. This is because the [Enter] key still works on the frame behind the JOptionPane and thus tries to validate it again, which results in another invalid dialog msg popping up.
The only way to get out is to use the mouse or the Esc key.
Now, in the application I put in a workaround that I was not very happy with. So, to make sure it wasn't the application itself, I created a test which demonstrates that it still misbehaves.
Here it is.
import java.awt.Container;
import java.awt.FlowLayout;
import java.awt.event.ActionEvent;
import java.awt.event.KeyEvent;
import javax.swing.AbstractAction;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JTextField;
import javax.swing.KeyStroke;
import javax.swing.UIManager;
import javax.swing.UnsupportedLookAndFeelException;
import javax.swing.WindowConstants;
* @author avromf
public class FocusProblemTest extends AbstractAction
     private static JFrame frame;
     public FocusProblemTest()
          super();
          putValue(NAME, "Test");
     public void actionPerformed(ActionEvent e)
          JOptionPane.showMessageDialog(frame, "This is a test.");
     public static void main(String[] args)
          FocusProblemTest action= new FocusProblemTest();
          try
               UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
          catch (Exception e)
               e.printStackTrace();
          frame= new JFrame("Test");
          frame.setDefaultCloseOperation(WindowConstants.DISPOSE_ON_CLOSE);
          Container contents= frame.getContentPane();
          contents.setLayout(new FlowLayout());
          JTextField field= new JTextField("Test");
          field.setColumns(30);
          JButton button= new JButton(action);
          KeyStroke enterKey = KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0, true);
          button.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW).put(enterKey, "test");
          button.getActionMap().put("test", action);
          contents.add(field);
          contents.add(button);
          frame.pack();
          frame.setVisible(true);
}Does anyone have any solution to this problem?

I know that focus management has changed alot.
Based on my experimentation a while back, in 1.4 it still believes that the JFrame is the window in focus, even though a JOptionPane is currently in front of it (unless I misinterpreted what was going on). Thus, the frame seems to get the keyboard event and re-invoke the action.
A.F.

My iTunes says that there is a problem with my ipod and i have to restore it, but i bought songs on my itunes on my ipod not on the itunes on the computer so i have not transfered purchases and now it wont let me how doi restore without losingmy newsongs

So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything. Thanks

There is a backup plan after doing the Restore. Read this.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3. Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

razzbust wrote:
...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
Self explanatory.
You could try creating an iPod version of the films.
Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

Having problem with dead key in Leopard

Hello. I'm having problem with dead key in Leopard.
In Tiger it was working, but in Leopard dead key "'" doesn't work.
In Tiger I could use OPTION key as well to get Latvian special characters (both worked - OPTION Key and dead-key), but in LEOPARD OPTION key is the only possibility to get these characters.
How can I get dead key "'" working?
I'm using Latvian language with Latvian keyboard layout.
Here are images how it looked in Tiger:
1) Before dead key is pressed:
http://amerix.no-ip.org/tmp/1.tiff
2) After dead key is pressed:
http://amerix.no-ip.org/tmp/2.tiff

ok, i got answer
so - first problem was that ukelele didn't work in leopard (it wasn't possible to start new layout), but it was possible to edit Tom Gewecke posted layout.
There it is possible to change every thing (dead-key as well).
So I edited it and now i have layout where dead-key works -
http://amerix.no-ip.org/tmp/LatvianT.keylayout
Just do what Tom Gewecke said with this layout. It should work!

Problems with letter type

Problems with letter type homepage www.JO-qigong.nl When I want to make another type it changes the whole page? Why?

Thank you for responding. I am sure that I selected the text. I don't do anything different than I did many times before. But if I change a text know, for exemple in the color Red, than other text, that I didn't selected, get a different text: bigger text or other color. In iWeb everything is OK, but when I publish it, than there are those grazy changes. I use iWeb for 3 years now and had no problems till now.
Is it because the software is not supported anymore by Apple, because you can not update the software anymore. It is a pitty, because I like iWeb. It is easy to work with.

Problems with fuction keys for brightness

i have laptop hp 15 r006tx Product number: G8D30PA#ACJ
i have problems with functions keys for brightness , actually it does't works i can't actually adjust brightness, please help me.....................

OK...
I was right. You have no graphics driver installed for the Intel HD graphics adapter.
I am very surprised you were able to install the nVidia driver because usually you get an error that states you need to install the Intel graphics driver first.
Once you install this driver, the Microsoft Basic Display adapter should be replaced by an Intel HD graphics adapter and you should be able to adjust the screen brightness.
Make sure you have installed this Intel chipset driver first and reboot. If you have done this already, you can skip this step.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1&cc=us&dlc=en&lc=en...
Next, install the Intel HD graphics driver and reboot. This driver is for W8.1. If you installed W8, you need a different graphics driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130257-1&cc=in&dlc=en&lc=en...

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else?

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else? Thanks, Rose

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that does'nt help log into another user account on your Mac and try iPhoto from there.

Problem with a key figure restriction

Hi,
I have a problem with one key figure in report: in infocube, this key figure is aggrigated for all the profit centers (summation). In infocube, there is a value '150' for each profit centers (100 pieces) and in the report it is counting 150*100=15000. However, it shouldn't count the sum of all entries in the infocube but show only one value in the report which would be '150'.
I think this should be possible to do but I just don't know how. Hope somebody is able to help me. Thanks in advance.

Hi,
If the values are same for all profit center then change the Profit center infoobject property in the query design to show the maximum values for the 'calculation result as' parameter
Regards,
Vishwa,
Edited by: Vishwanath H.E on Sep 3, 2008 9:19 AM

I'M HAVING PROBLEM WITH FUNCTION KEY, I'M HAVING PROBLEM WITH FUNCTION KEY

Hello everybody
Recently i'm having problem with function key of iphone4, now its working assistive touch key board , between these days i had restored and update then it work for next 12 hour after that it again stoped..
pls help me from this isssue,
thanking you.

There are no function keys on the iPhone.
Please clearly state the issue that is occurring.

Problem with Internet Key Onda Mt835Up: It doesn't work with mac os 10.6.6

Hi I have a problem with internet key Onda MT835UP. It doesn't work, because my imac is more new than internet key.
Can you help me? Can you send me the upgrade for this internet key?
Thanks

I have called Onda, there isn't the driver for Mac OS X 10.6.7 and they don't know if it'll be released.
So if you have a Mac it's better to not buy Onda internet key,
instead it's better to choose other brands that update the drivers of their products.

Letter keys and Caps lock not responding

So, I've run into a very odd problem several times now, and I was wondering if anyone had encountered anything like it. Basically, the computer stops responding to the letter keys and cap lock will no longer turn on (light doesn't even turn on), but the arrow keys, command, and tab still work. The only way I have found to make the keys respond again is to reboot.
This has so far occured at two different occasions: Once, while using Blender 2.49b, and several times while playing the game "Warcraft 3: the Frozen throne." The only similarity I noticed between them is that they both fill the entire screen. The problem has not occurred anywhere else, although it persists after quitting the application.
Does anyone have any ideas?

I have been researching a lot on the internet re: 10.6.7 macbook's built-in keyboard's arrow keys are not responding! Been doing it for more than a month. I even saw a HARDWARE Troubleshooting at Youtube, by taking out the battery and tighten some screws for the keyboard, that people do by themselves and most of them say they get it fixed. Since I AM NOT techy I still tried to search for more resolutions at least before I spend money to bring my Macbook to a repair store! And finally! Thank God!!!! THIS RESOLUTION JUST FIXED MY PROBLEM w/o having to TECHNICALLY open my Macbook, take the battery out and screw harder some screws inside the laptop! THANK YOU SO MUCH FOR SHARING THIS RESOLUTION! ^_^

Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Baffling problems with letter key and erratic keybinds

Similar Messages

Maybe you are looking for