BAI2 file import showing debit as a credit after import

We added a transaction code in FT "Auto generated bank statements" as a debit (decrease)  - payment processing of outgoing external payments. However when a bank statement is imported, the system picks it as a credit - other incoming payments. Not sure if this is a system but or there is another FT setting aside "Anto generated bank statements" ahere I need to add the new code to...

Gopal,
BA12 US File import works perfectly for me. Please check the following below
1. That the transaction code on the bank statement txt file for import is the same as the code you added to the system on configuration as they differ by bank.
2. That when you are adding the code that BA12 is highlighted on top.
3. Confirm that the description is outgoing external payments on configuration.
4. Confirm that the debit/credit is set as decrease on configuration.
5. Confirm that the payment method is outgoing external payments.
6. Confirm that the downloaded bank statement txt file has not been altered.
See screenshot sample below
It's advisable to reconfirm the codes from your bank to be sure.
Regards,
Emeka

Similar Messages

  • Acrobat PDF file not showing any character "i" only after an "f"

    I have a file that was provided from an unknown origin.  The original PDF is good.  After using Acrobat Pro, 11 - every lower case letter "i" if used after a character "f" is missing.  Therefore the view shows this:  "See f gure #", or "the proper conf guration is", or "in case of f re".  The font is Times Roman.  The "i" character in error can be searched by using a copy paste of the bad character into the search field dialog box.  It can't be replaced however  - with a good "i" - by performing a search and replace.  The (for lack of a better phrase) "invisible i" can be deleted and a new "i" inserted, but by performing a search, I have 6,700 of them.  Doing them individually isn't an option.  This document has gone through at least three editors hands, and re-doing what they so painstakingly did - and losing a large amount of work for what appears to be a software glitch is not the preferred option.
    I've tried saving as prior versions of PDF, messed with Preflight, printed to a pdf, used different views, embedded / unembedded fonts.
    There has got to be a fix for this. 
    Please help, and thank you.

    Adding fuel to the fire...    In a document that uses Times  Roman as the font, the "i"s have been changed to Minion Pro.  Upon further review, all letter "L" - lowercase is also missing, but only after the character "f".  A document that says "have a safe flight"  now says "have a safe f ight" and the word "reflected" is now "ref ected".  The character "lower case L - l " has been changed to the font - Dutch 801 SWA.
    I cannot select any of the invisible characters and change the font - as the fonts are greyed out.
    Gotta be a fix...  this is really bad, and not user error.

  • PHotoshop CS4 - scanner doesn't show up in File - Import

    Hello,
    I have an Epson Perfection 4180 scanner, and Photoshop CS4 extended and a Mac OSX 10.6.3.  I installed photoshop but the scanner doesn't show up under the File>Import menu. Normally it be there, i'd click it, and it launches the scanner within photoshop.
    I found some info on google which suggested to look in a  folder on the installation DVD called "Goodies"
    In there is a folder called Optional "Plug-Ins"
    In there is a folder called "Import-Export"Where i found a file called TWAIN.plugin
    I put the file into Adobe Photoshop CS4/Plug-ins/Import-Export but it still doesn't appear in photoshop file > import.
    Any ideas on what i should do?
    Many thanks
    Rossella

    Use the stand-alone application.
    And/or do a Forum search for »CS4 scanner« – that should turn up a couple threads.
    http://forums.adobe.com/message/2221702#2221702

  • .mov &/or .dv files not showing up in iMovie09 after import

    I have an orginal file that is in the .mov format. I converted it to a .dv file due to not being able to import it into iMove '09.  It allows the import but it does not show up in any of the file areas as though it was imported.  I converted it to a mp4 but it became very pixleated. Any suggestions would be appreciated.

    For MPEG1, you will need to convert it to a format that iMovie can edit.
    Get a free tool called MPEG Streamclip.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    Drag your MPEG1 clip into MPEG Streamclip. Then FILE/EXPORT USING QUICKTIME. Choose Apple Intermediate Codec as the codec. Save it where you can find it. This will be an MOV file.
    Now, in iMovie, use FILE/IMPORT MOVIE to import the clip you just made into iMovie.

  • Show debit and credit of documents

    Hi,
    what is the transaction with which i can show the debit and the credit of each document.
    for e.g with FBL3N we can show documents but we must enter inside for showing details (debit and credit).
    for having a quick consultation of documents how to do?
    please help,
    regards

    Hi,
    what is the transaction with which i can show the debit and the credit of each document?
    for e.g with FBL3N we can show documents but we must enter inside for showing details (debit and credit).
    please help,
    regards

  • How do I get Adobe  Photoshop CS to show my Epson 3200 Scanner  in the list under File Import?

    How do I get Adobe  Photoshop CS to show my Epson 3200 Scanner  in the list under File Import?

    That will depend on installing a proper driver for the scanner that is compatible with the respective version of PS. But if you really mean a 12 year old PS CS1, it will be nigh on impossible to get this working with a brandnew scanner... Anyway, you wil lhave to provide more info about your system and clarify the points in question.
    Mylenium

  • SWF file imports as 32x32 icon into DW and will not show Flash playing in browser. WHY???

    I am importing a 569 x 441 Flash (CS3) swf file into
    Dreamweaver. The file imports as a 32 x 32 "Flash" icon. Once I
    change the pixel ratio, and select Play in DW - it looks fine. Once
    I export and preview in a browser it looks nothing like my file.
    WHY??? Can you please help me?

    I am importing a 569 x 441 Flash (CS3) swf file into
    Dreamweaver. The file imports as a 32 x 32 "Flash" icon. Once I
    change the pixel ratio, and select Play in DW - it looks fine. Once
    I export and preview in a browser it looks nothing like my file.
    WHY??? Can you please help me?

  • Epson 2480 Scanner doesn't show up in File Import menu in PSE 6

    Hi
    I'm on:
    Intel iMac
    Mac OS X 10.5.8
    I recently upgraded from PSE 4 to PSE 6 and everything is fine. It delivers everything I expected but for one little thing.
    Il have been using my Epson 2480 scanner with PSE 4 for years both on G4 and Intel based Macs. I never had an issue. The driver used to be listed in the File>Import menu.
    After installing PSE 6 I uninstalled the Epson driver and installed the updated version.
    The Adobe authored TWAIN.plugin is correcty installed in the Adobe Photoshop Elements 6/Plug-Ins/ImportModules.
    It still works in PSE 4.
    Yet it isn’t listed as it should in PS6. Did I miss something?
    TIA
    Nick

    Bingo!
    I don’t repair permissions often. I probably should;)
    I’ll check the Rosetta box when I need to scan stuff and I’ll let it unchecked the rest of the time. PSE 6 works perfectly well as it is.
    BTW I read in the PS forum people say it was as shame to use a sophisticated soft like PS for such a trivial job as scanning. They suggested one could just use the scanner dedicated soft. I found the argument ludicrous. If I need to process the images with PSE it’s darn convenient to get them with PSE in the first place. Thanks to you I'll be able to do so.
    Thanks for your help and patience, Barbara.
    Regards.
    Nick

  • Scanner doesn't show in File Import menu in PSE 6

    Hi
    I'm on Mac OS X 10.5.8
    I recently upgraded from PSE 4 to PSE 6 and everything is fine. It delivers everything I expected but for one little thing.
    Il was using my Epson scanner with PSE 4. The driver used to be listed in the File>Import menu. After installing PSE 6 I uninstalled the Epson driver and installed the updated version. Yet it isn’t listed as it should. Did I miss something?
    TIA
    Nick

    duplicate post:
    http://forums.adobe.com/thread/482244?tstart=0

  • External Drive Files Not Showing Up on Mac but files do shows Up on PC

    External Drive Files Not Showing Up on Mac but files do shows Up on PC
    i had the Ex HD for about 3 years running smoothly on my mac but recently everything disappeared. plunged it into a pc to see if it read my files and it did. what can i do? to make it work on mac again. i don't want to reformat that drive because i have important applications (DMG) and other zip photo video files in the drive.

    yes. i did.
    ...i have tried "verify" & "repair" but they didn't pass the san test. and when i "unmounted/mount" a error message popped up say that there is a application running off the drive but there nothing (i see) running, to close all activity

  • Dynamic link in Encore to get AE project, bluray, after transcoding, file still shows untranscoded

    Hi,
    I have an After Effects file. I have several comps that are 1920x1080 at 29.97 drop frame. When I go to Encore, I use, Import After Effects Composition and import several compositions from my AE project. I've tried using both Automatic transcode settings and I've tried to set the settings myself. When I transcode, Encore goes through the motions, but when it's done, the file still shows "Untranscoded". I have checked the project folder and confirmed that the transcoded files are indeed there, but Encore still shows them as untranscoded. What is going on?
    Thanks,
    Stan

    Hi,
    Transcod your comp in AME. Choose H.264 Blu-Ray if you have more than 2 hours videos.
    Bye
    Steph

  • CS5.5 hangs on file import

    I have been using PP for several versions and have never experienced any major issues until now.  At some point in the last few weeks (cannot link it to a recent PP update, but that may be the case) I have started having extreme problems when importing files.  It started on my laptop, then I experienced the same problem on my desktop.
    I nearly always import .mov files and have had no problems in the past.  Now PP hangs randomly on file import.  It seems to work more often than not if I import one file at a time, but even then it may stop randomly on a file.  If I restart it may successfully import the file it stopped on, or it may crash again.  It is impossible to import a large batch of files at once, so working on a large project is now almost impossible.  I cannot see anything in this forum that relates to it.  I am running Windows 7 an PP version 5.5.0.  In addition my laptop version randomly shows 'pending' against different files - this changes to other files if I re-start.  If I try to re-link it can also cause a hang.
    One other change in my workflow.  I have switched from a Canon 5D mark II to a mark III.  But I can read and edit the files succesfully and play them in other applications, just as with the mark II.  But even with the mark III I successfully imported my first batch of files about a month ago and had no problems whatsoever.
    Any ideas?

    Update
    I have been researching this further.  There is a possibility that this is related to the new container format in the 5D mark III.  This camera now allows high or low compression .mov files to be created.  In the mark II they were all low compression.  The last batch that I created was high compression.  It is possible that PP is having trouble with these.  It still randomly rejects files and randomly reports some as being off-line, yet the next time I connect they are back on-line.  I created a batch of 10 with low compression and they loaded correctly, but have not tested this with a large batch of real files.  I am also checking with Canon to see what has changed.
    If anyone has any further advice or experience I'd be grateful.  In the meantime it seems that the only way I can safely process these files is to run them all through the media encode and convert them to mp4 or something similar.
    Further update
    I am gradually answering my own question here.  For anyone with a Canon 5D mark III you might be interested.
    First batch of footage shot on 5D mk III set to 1080P high compression.  This caused PP and Media Encode (ME) to crash frequently.  Even footage already loaded came back with an off-line message randomly.
    Test set of footage shot on 5D mk II worked perfectly in the same project.  There are no compression options on the mk II.
    Could not convert original batch with ME so used MPEG Streamclip to convert the batch of 100+.  Conversion worked first time.  Import into PP worked perfectly.
    Shot a test batch of 10 with the mk III in low compression and they all imported with no problems.
    This points to an incompatibility between PP/ME and the new 5D mk III low compression format files.  I'll report this as a bug to Adobe.  I have already reported it to Canon.

  • How do you get canoscan lide 110 scanner to display in "file import" menu?

    I have several older versions of Photoshop Elements running on various computers.  In ALL of them, if you go to "File>Import" you see "Canoscan LIDE xx".  when you choose it, there is a great scanning application that runs. On a newer computer, i had Photoshop CS5.5 installed.  It only shows WIA under the import menu.  The scanning software there is horrible.  I tried installing the same scanner (lide 110) on an older computer running older photoshop elements and it showed up.  i then installed a older version of the elements software on the new computer.  Again, the scanner showed up.  Not wanting to break licensing agreements, i just downloaded a brand new version of photoshop elements 12 and installed it.  it only shows WIA in the file/import menu and not the scanner. therefore, i dont have the scanning software/application i need.  without it, this version of elements is 100% useless to me.  can someone please help me get my scanner to appear in the "file>import" menu?  Yes, i do have the latest version of software downloaded from canon's website.

    Hi,
    I believe that this is where PC & MAC versions differ.
    The PC version  will "get from scanner" in the organizer but the MAC version has to "Import from scanner" in the editor. I don't know why they act differently.
    It has been posted on this forum (can't find thread at the moment) a fix for the windows version of copying a module from a previous version if you had one. That is not an official fix.
    If I find the link I'll post back.
    Brian

  • Parts of Hard-drive files not showing, only on macbook?

    Hey guys, I have a hard drive that has been running well until now. When I open a folder in Finder, which contains a large amount of files in it, only the first ten-ish are shown, the rest disappeared. But they are still there, because some missing files are music files imported into iTunes, and when I open iTunes, those "missing" music can still be played. Also, this problem doesn't appear on Windows, when I plug the hard drive on a Windows PC, everything is there again. Any idea what the problem might be? Thanks in advance.

    The Apple System Profiler shows all the correct info except the name is "unknown." The only 2 places that seem wrong are the desktop - no hard drive, and in Disk Utility. I don't know what it's called, but the line directly under the listed hard drive in Disk Utility (74.5 GB WDC WD800JB-00CRA1) should have the name of the hard drive (Macintosh HD) listed but it does not. It should look like this but with an icon of a hard drive in front of each line:
    74.5 GB WDC WD800JB-00CRA1
    Macintosh HD
    The second line (Macintosh HD) is not there. The other hard drives have their names listed. Apple seems to think this is a problem but other than running Data Rescue and Disk Warrior (neither of which did anything) they have not given me any other suggestions.
    The computer knows the hard drive is there but it won't let me access it. I have done, tried, and checked all the easy stuff. (Cables, any and every type of connection, restarting holding down option + apple + F + O and all the other restart variations with and without the OSX CD, and running "rescue" programs.) Nothing has worked. Short of an exorcism, I'm out of ideas.

  • HT4101 I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to down photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please.

    I am trying to connect my JVC Hard Disk Drive Camcorder to my IPAD 2 via the Apple camera kit. I am able to download photos, but video files not showing. Camera shows Mass Stoarge. How can I download videos please?

    The file name only has 6 characters and I'm not sure what the .mod format is. So that's why they are not seen by the iPad.
    Another way to transfer. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom
    Look at this link for convertion the .mod format.
    http://www.makeuseof.com/tag/convert-mod-camcorder-video-format-mpg-instantly/
    Message was edited by: Texas Mac Man

Maybe you are looking for