Bajo rendimiento con windows 2008 y sql 2008

Instale windows 2008,Sql 2008 y le hice un upgrade a Sap Business one pl42 pero el rendimiento es un 80% menos que cuando tenia windows 2003 y sql 2005 .
El rendimiento me bajo considerablemente y no se donde buscar el por que , me pueden ayudar

Hola evelyn, buen día.
Vale la pena preguntarte lo siguiente: estás utilizando para la instalación de MS Windows Server 2008 y MS SQL Server 2008 el mismo hardware (Servidor) que estaban usando para MS Windows Server 2003 y MS SQL Srever 2005?
Yo tengo instalado SAP BO, PL42 en un servidor IBM x3650, con 1 procesador Quadcore, 4GB de RAM y 3 Discos SAS 15K de 146GB, además de eso MS Windows Server 2008 Standard Edition x64Bit con Hyper-V, como servidor virtual MS Windows Server 2008 Standard Edition 32Bit con MS SQL Server 2005, el rendimiento es óptimo (vuela literalmente).
Resumen: el problema de performance pudiera estar vinculado a las capacidades del Hardware que estás usando como servidor. ¿Qué piensas al respecto?
Saludos,
Erick Gómez

Similar Messages

Error con el DTW en SQL Server 2008

Buenas tardes...
Bueno, la cuestion es la siguiente, estoy intentando de realizar una subida de plantillas por el DTW, a SAP 2007 SP 01 PL 10 pero cada vez que le doy a "run simulation" o a "importar" simplemente se pone la pantalla del DTW mas clara, y aparece un mensaje diciendo: "Este problema tuvo un problema y debe cerrarse" si así mismo, este problema tuvo un problema...
Bueno. la cuestion es que aparece solo 1 boton que al precionarlo cierra el DTW por completo.
Ya realicé la desinstalación y reinstalación, actualizando el DIAPI, reiniciando el servidor y demas pero nada. Lo unico que encuentro es en el visor de sucesos de Windows server este mensaje:
"Aplicación con errores DTW.exe, versión 2005.0.0.30, marca de hora 0x4b4f7ce3, módulo con errores kernel32.dll, versión 6.0.6002.18005, marca de tiempo 0x49e037dd, código de excepción 0xe06d7363, desplazamiento con errores 0x0003fbae, Id. de proceso 0x430, hora de inicio de la aplicación 0x01cb958542dd4f84."
Me preocupa mas que todo la parte que informa problemas con el DDL de Kernel32.dll si esto es así podría ser directamente un problema de incompatibilidad con Windows server 2008 pero quería primero comprobar con las personas del foro para ver si han trabajado con esta herramienta o conocen alguna solución.

Hola nuevamente...
Si, ya habia verificado eso, inclusive llegue a desinstalarlo y asegurarme de instalarlo del actualizador de la versión en la que se encuentra el sistema.
Sin embargo ya logre medio solucionar el fin de semana en mi casa, Resulta ser que hice una exportación de la tabla de articulos desde SQL a Excel. Luego tome los datos de esa hoja, y los organice en la plantilla correspondiente, cambiandole a todos los articulos en la descripción, poniendoles un punto al final (todo esto en una BD de pruebas local).
La plantilla subió y no hubo inconvenientes, por lo que el motivo del error debe de ser algún dato en la plantilla original que me dieron.
Ahora tengo es otro inconveniente, Resulta ser que queremos hacer una carga nuevamente de los articulos, pero con los codigos cambiados ligeramente.
Por ejemplo, el articulo originalmente era con el codigo "A-01" pero la consultora funcional que subio los articulos en el cliente los subio con "A_01" es decir a todos los articulos les puso un guion bajo, y claro esta el cliente se molesto y no lo quiere de esa manera.
Lo que se va a hacer ahora es subir nuevamente la plantilla pero con los codigos de manera correcta, se le hara salida de inventario a los articulos con los codigos erroneos, y se bloquearan. Los filtros de busquedas se configurarán que no traigan los articulos que esten bloqueados.
Pero he aqui el inconveniente y que estoy montando ahorita el caso en SAP, Cuando intento de subir estos articulos con el codigo de manera correcta, (es decir con los "-" correctamente), el sistema me dice que no puede subir los articulos porque los mismos "Ya existen en el sistema".
Al buscarlo en SAP en el maestro de articulos me dice que no existe el mismo, y si busco crearlos manualmente (no por el DTW) tambien me da error de que el articulo ya existe.
Me puse a revisar las tablas por el generador de consultas, y encontre que en la tabla de almacenes y la de lista de precios ¡Si existen estos codigos!...
Lo que no logro comprender es porque si los mismos no pueden subir, y nunca llegaron a subir con el "-" en la base de datos, porque existen en estas 2 tablas, pero no existen en la tabla principal de Articulos.
Gracias por la respuesta.

CRM 7.0 installation failed on Windows 2008 R2 SQL Server 2008 SP1

Hello I'm currently trying to install CRM 7.0 on a windows 2008 R2 (64B) plateform with SQL Server 2008 SP1 as database engine
while launching sapinst.exe i'm facing this issue that i cannot get rid of it
Could someone Help , would really be appreciated as i'm a newby on SAP world
thanks a lot
Unable to start a service execution. Please check the following information for the possibble reason and inform the installation development : Opened sylib701_1.dll exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Opened C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iaguieng701_1.dll receiving and sending on port 21200 Environment variable SAPINST_JRE_HOME set to value 'C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/jre'. exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Opened C:/Users/SAPINS~1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iakdblib701_1.dll This is SAPinst, version 701_1, make variant 701_REL, build 1015514 compiled on Oct 3 2008, 01:51:15 MessageLib initialized successfully. showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title> <dialog/> Login in progress Connection request to guiengine backend by host 169.254.138.68 Protocol version is 3.1 Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Windows\System32\x. Removing file C:\Windows\System32\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/> Waiting for an answer from GUI current working directory is C:/Windows/System32 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Unable to open URL file://C:\Windows\System32\control.xml. The execution will be terminated now.

Hi!
Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released, so you may get it to run technically but not everything is tested and so, you should not install any SAP system on it!
In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
See [SAP note 1383873|https://service.sap.com/sap/support/notes/1383873] ("Windows Server 2008 R2 Support").
You can be always up to date with the latest Windows news at:
[SAP on Microsoft Windows|SAP on Microsoft Windows] --> Support of Microsoft Windows Server 2008 R2
Cheers!

"BCP Commit Failed" New Install On Windows 2008 R2 with SQL Server 2008 R2

I am installing a new Netweaver install on a virtual machine loaded with Windows 2008 R2 and SQL Server 2008 R2. The install gets to the "Import ABAP" phase and just hangs. SAPINST says it is still running, but there is no activity to suggest there is anything going on. There are no errors in the main logs, but after digging a little I did find these errors in the SAPSDIC.log file.
(IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_CHAR_COND~0'.>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: BADI_FILTER created
(DB) INFO: BADI_FILTER~0 created
(IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_FILTER~0'. Ca>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: BADI_IMPL created
(DB) INFO: BADI_IMPL~0 created
(IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_IMPL~0'. Cann>
(IMP) ERROR: EndFastload: rc = 2
Anyone have any ideas as to what might be going on? I can't find anyone with this exact same error. And this is our first attempt at installing a system with Windows 2008 R2 and SQL Server 2008 R2. All of our other Windows SAP systems are on Windows 2003 and SQL Server 2005 and we're in the process of upgrading - this being the first system.
Thanks in advance,
Michael

Set BCP_LOB=1 in your system environment
Note 1156361 - R3load: Fastload doesn't support LOB-columns
Markus

Trouble installing/using SQL Developer on Windows 2008 R2

I need help installing sql developer.
I am running Windows 2008 R2.
I tried installing the 64 bit version, and when it asked for the path to the JDK, it complains that it doesn't exists. Can someone PLEASE point me to which JDK I need to install?
I tried installing the 32 bit versionand it installs fine, but then gives me the error that it can't load AMD 64-bit dll on a IA 32 bit platform.
PLEASE HELP. How can I run SQL Developer on Windows 2008 R2?
Links to the exact versions of what to install would be very very helpful.
Thank you!

The versions required are in the release notes.
If you install the 64-bit SQLDeveloper you need a 64-bit JDK.
If you install the 32-bit SQLDeveloper you need a 32-bit JDK.
If your operating is 32-bit, you need a 32-bit SQLDeveloper.
Note that you need a JDK not a JRE
Edited by: Jim Smith on Apr 4, 2011 9:04 PM to fix 32/64 bit errors.

Error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication" on SQL Server 2008 R2 Enterprise Edition 64-bit SP2 clustered instance

Hi there,
I have a Windows 2008 R2 Enterprise x64 SP2 cluster which has 2 SQL Server 2008 R2 Enterprise Edition x64 SP2
instances.
A domain account "Domain\Login" is administrator on both physcial nodes and "sysadmin" on both SQL Server instances.
Currently both instances are running on same node.
While logging on to SQL Server instance 2 thru "Domain\Login" using "IP2,port2", I get error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication". This happened in the past
as well but issue resolved post insatllation of SQL Server 2008R2 SP2. This has re-occurred now. But it connects using 'SQLVirtual2\Instance2' without issue.
Same login with same rights is able to access Instance 1 on both 'SQLVirtual1\Instance1' and "IP1,port1" without any issue.
Please help resolve the issue.
Thanks,
AY

Hello,
I Confirm that I encountred the same problem when the first domain controller was dow !!
During a restarting of the first domain controller, i tried to failover my SQL Server instance to a second node, after that I will be able to authenticate SQL Server Login but Windows Login returns Error 18452 !
When the firts DC restart finishied restarting every thing was Ok !
The Question here : Why the cluster instance does'nt used the second DC ???
Best Regards
J.K

Oracle12c SQL*NET blocked by Windows 2008 firewall - what is the correct solution?

Hello,
I have a question with regards to the SQL*NET traffic being blocked by the Windows 2008 firewall. This document shows that disabling the firewall can resolve the problem:
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=166773506396122&id=1472931.1&displayIndex=13&_afrWindowMode=0&_adf.ctrl-state=o4dq0hlih_112
Is this really the solution?
From what I understand from other documents is that just enabling port 1521 will not resolve any issues, as SQL*NET can use redirection to other random ports. That is probably the reason why the Oracle installation does not alter any firewall settings.
What other methods do people use to connect a client to a DB server?
This document shows what other methods to use, but who uses them?
https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=166043735580557&id=68652.1&_afrWindowMode=0&_adf.ctrl-state=o4dq0hlih_78
Does anyone use the Oracle Connection Manager for example?
Thanks
Richard

I configure firewall to allow DB Server to start new network connections

Windows 2008 64-bit SQL Server 2008 64-bit Linked Server fails - ODBC connects but has issues

Installed the 64 but Oracle 11g client and Oracle ODAC.
From SQL Server Management Studio run script : exec master.dbo.xp_cmdshell 'PING OracleHostNameHere' Ping was successful
OraOLEDB.Oracle shows up in the Provider list. Run This Script:
EXEC master.dbo.sp_MSset_oledb_prop N'OraOLEDB.Oracle', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'OraOLEDB.Oracle', N'DynamicParameters', 1
GO
EXEC master.dbo.sp_addlinkedserver @server = N'Nav14', @srvproduct=N'Oracle', @provider=N'OraOLEDB.Oracle', @datasrc=N'TheOracleHostName'
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'TheOracleHostName',@useself=N'False',@locallogin=NULL,@rmtuser=N'TheUser',@rmtpassword='ThePassWord'
Msg 15015, Level 16, State 1, Procedure sp_addlinkedsrvlogin, Line 49 The server 'TheHostName' does not exist. Use sp_helpserver to show available servers.
Did the same process on a Windows 7 32 bit Enterprise - ODBC Works after installing ODAC
ODBC worked, shows list of Oracle servers - picked the server - ODBC successful - MS Access able to use that ODBC service.
In Windows 2008 64 bit installed both Oracle 11g Client and 64 bit ODAC - ODBC opens, the list of oracle servers doesn't populate, hard code in the host name - ODBC reports Success.
Another Person Suggested: Win7 64-bit with Oracle 11g. Oddly enough, it ran differently when I opened a command prompt window as administrator and ran setup.exe with the suggested command-line options:
setup.exe -debug -printtime -printmemory -printdiskusage -logLevel finest
While it had previously been failed both by running setup from the Explorer windows as administrator and by running it from the command line as administrator - it died every time at the same point mentioned by others in this thread - just after this message appeared in the log:
Get view named [SummaryUI]
( I have tried re installing with no success)

Windows 7 Enterprise 32-Bit
Installed the version 12 for 32 bit ODAC and it worked. The key is to Install as Administrator once it is unzipped.
Was able to set up Listener then
Was able to set up ODBC using the ODAC. Connect MS Access 2010 to the Oracle views.
Then, tried to install the 64 Bit onto Windows 2008 Server.
It locked up during installation both times.
Installed ODAC without an error.
However, the ODBC setup will not provide a list of the servers in the ODBC TNS Service Name listbox for Server 2008.
In Windows 7, it populates the TNS Service Name.
The list box in Windows 2008 is empty.
Do you know what would cause that?
The .ORA file scrips look the same on Windows 2008 as they do on Windows 7 except it does not have the (server = Dedicated) argument.
Thanks.

Windows 2008 Standard SP1 will Support MS SQL Server 2008R2 Enterprise Edition ?

Dear ,
Currently we are running MSSQL Server Enterprise 2008 Edition on Windows 2008 Standard Edition 64Bit (.Net 3.0). Now we are upgrading the MSSQL Server to 2008R2 Enterprise with SP2. Will it support to upgrade on the same OS or do we need still upgrade
OS also to Windows 2008 R2?
1. Do we need to upgrade OS from 2008 to 2008R2 Sp2.?
2. MSSQL 2008/2008R2 Enterprise on Windows Standard is compatible ?
Need your help on above details.
Thanks

Hello
Check support matrix:
https://msdn.microsoft.com/en-us/library/ms143506%28v=sql.105%29.aspx#EEx64
need only sp2 if not have to OS.
and check your sql version upgrade path:
https://msdn.microsoft.com/en-us/library/ms143393%28v=sql.105%29.aspx
sorry my english

The acount information could not be verified - SQL 2005 SP3 installation on Windows 2008 R2 Failover Cluster

Hi,
We have a problem when we are trying to install SQL SP3 on SQL 2005 cluster.
The problem is described bellow:
We installed a new Windows 2008 R2 x64 failover cluster with two nodes.
As a next step we installed SQL 2005 Enterprise edition x64 on this failover cluster. We have finished the installation without problems. After SQL installation we are trying to install SQL SP3 . We have logged on using a domain administrator account and
we start the installation of SP3 with that user. In authentication mode screen the test gives a success status using either domain administrator-windows authentication or sa-sql authentication. On remote user account screen, when we give the domain
administrator account we get the message "the account information could not be verified. Press ok to return to authentication mode screen to determine the reason for failure".
We have tried to give the SQL services startup user on remote user account screen but the error is the same.
the domain administrator account exists on security logins of SQL with sysadmin rights.
Can someone help?
Thanks.

Hi StelioMavro,
According to your error message, when you install SQL Server 2005 SP3 in your failover cluster, we need to verify if there was other instance that had been removed and the installation did not pass the login check. I recommend you use windows authentication
instead of SQL Server authentication when applying SP3. And the windows account used to run the SP3 setup program must have administrator privileges on the computer where SP3 will be installed.
For more information about how to install SQL Server 2005 SP3 in failover cluster, you can review the following article.
http://www.sqlcoffee.com/Tips0007.htm
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

In place upgrade Windows 2008 and SQL 2008

Hi all,
We are planning to upgrade to Windows 2012 and SQL 2012 , can we take this in-place upgrade path in the following order ?
Setup 1 Host with 2 VM's running Windows 2008 R2 on Host and Windows 2008 R2/sqL 2008 on VM's.
1. Host1(running 2 VM's) - In-place upgrade windows 2008 R2 to windows 2012 R2
2. VM1 on host1 - In place upgrade windows 2008 R2 to Windows 2012 R2
3. VM2 on host1 - In place upgrade windows 2008 R2 to Windows 2012 R2 (AD Server)
4. SQL running VM1 - In place upgrade SQL 2008 with DB/reporting services to SQL 2012 DB/reporting services
All Servers ( including Host and VM's) are stand alone in a workgroup setup.( except one VM a stand alone AD server by itself).
Thanks for your help.

Hi,
If you want migrate from windows 2008r2 to windows 2012r2, you must install windows server 2008r2 sp1.
http://technet.microsoft.com/en-us/library/dn303416.aspx
For the host 1 upgrade, please refer to the following:
http://blog.powerbiz.net.au/server-2012/in-place-upgrade-from-windows-server-2008-r2-to-windows-server-2012/
For the SQL in-place upgrade, i think you may need to ask in SQL forums:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlservermigration
Hope this helps.
Regards.
Vivian Wang

Sql 2008 r2 cluster side by side with sql 2012 cluster on Windows 2008 R2

We have a SQL 2008R2 active/passive SQL cluster running on Windows 2008 R2 cluster.
I would like to add a SQL 2012 clustered instance to the same Winows 2008 R2 cluster.
Are there any issues involved having a SQL 2008 R2 clustered instance running side by side with a SQL 2012 instance in same Windows 2008 R2 cluster?
Are there any pitfalls/"gotchas" to watch for with SQL 2012 cluster install?
Thank you so much!

Hello,
Two instances, one SQL Server 2008 and the other SQL Server 2012, side-by-side, is fully supported.
I would like to recommend you to assign a different port (not port 1433) to the non-default instance
to avoid an IP address conflict between both instances.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Migrate SQL 2005 from windows 2005 server to Windows 2008 R2 server

Hi all,
I need to move our SQL 2005 on a windows 2003 server to a new server with Windows 2008 R2 installed. Could someone show me what are the necessary steps I need to do?
Thank you.

Hey TR,
As per Microsoft recommendation, Before Installing new server try to run Upgrade Advisor and follow these steps
1. Take Full backups of all System and Application databases on your 2005 machine.
2. Script all logins --
3. Script all jobs
4. List out all Maintenance plans and their schedules -- You cant migrate so you have to create them manually
5. List out all Linked server(s) currently being used.
6. Check the service pack
7. Check the Edition
8. document the existing server settings so that it should match the same (collation,version,...)
Migration process
1. Migrate logins
2. Restore all App databases
3. Fix the orphan users
4. create the jobs
5. create maintenance plans
6. create Linked Servers
7. perform checkdb on all databases
8. rebuild indexes
9. update the statistics
10.move all the DTS / SSIS packages
11. Point the application to new server
12. Testing .... Change all the application connection string to new server and then start the testing then finally if everything looks good then you can down the sql 2000 server and start using new server.
LIKE THIS POST, PLEASE VOTE & MARK AS A ANSWER TO HELP OTHERS
DBA

SAP R3 4.5b running on Windows 2008 R2 and SQL 2008 R2

Hi
Trying to obtain information on compatability of SAP R3 4.5b running on Windows 2008 R2 and SQL 2008 R2 ?
I understand that SAP may not support this? But would it actually work? Assuming we have a third party supporting it?
Jay

Hi Jay,
You may check the support in PAM http://service.sap.com/pam.
Ideally SAP shall not support this environment.
Reason being:
1) SAP kernel for R3 4.5b not available for windows 2008 R2
2) Compatible database library not available for R3 4.5b on MSSQL 2008 R2.
with above 2 reason you shall not be able to install R3 4.5b on Windows 2008R2 with MSSQL 2008 R2 database.
Regards,
Deepak Kori

BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2

The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
thanks,
Tony DeStefanis
Column5 Consulting

Hi,
we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
we are developping our application-set and for the moment we have no problem.
regards
massimo

Bajo rendimiento con windows 2008 y sql 2008

Similar Messages

Maybe you are looking for