Balance between hardware, sample libraries and portability

OK, tough one this for me. I have started getting into Logic Pro and I am really enjoying using it alongside light sample libs like GPO4 etc. I have installed numerous loops and stuff from various sites and have not suffered any problems using it on my MacBook Pro 13"
Now, my MBP 13" is latest model with 250gb but only running at 5400 speed. However, it works and with a lot of screen tweaking and a prolific use of kbd shortcuts I am finding it easy to use.
Don't get me wrong - if I use Logic on my Mac Pro with it's 30" cinema display and 2nd monitor it's a lot easier but that's at work and the MBP is my home machine.
Problem is (maybe) is that I want to buy some more major libraries like the EWQL Symphonic Orchestra Platinum and the Choirs and I think I maybe just pushing it too far for my lovely little MBP
I can't afford to buy a stomping great 8 core, 16gb Mac Pro for home - divorce would ensue. And I don't want to anyway - I like linking up the MBP to my midi controller and just messing around. Once done, I crash on the couch with MBP and mix/add effects/mess around with everything - usual stuff
I guess what I am asking for (in a rambling way - apologies) is will I be able to run EWSQL SO Platinum and Choir on my MBP? Forget HD for now - I know the Platinum takes up 200gb - so I may have to go for the Gold Edition
The MBP meets minimum specs so I think it could be OK. However, I am worried I will get massive slow down/crashes once I get past 6 or so tracks through PLAY?
I know I can "freeze" the tracks (whatever that means) and I can obviously bounce say 4 or 5 tracks at a time - maybe keeping the original work in a different project in case I need to come back and tweak it later and then output/import as an audio track into the main project?
I was also wondering - re the HD issues - about getting a FW800 connect external HD for installing the platinum edition? But I guess that would really slow everything down trying to read from one of those instead of the internal SATA drive?
Maybe someone can point me to a 1TB SSD drive for the MBP for under £400/$600 If only! As I reckon that would help!
Oh, the MBP is the base model too with 2.33 processor and 4gb ram, 250GB HD.
What's kind of annoying is when I went to the apple store to buy I had decided on a more expensive 15" machine that had 320gb hd and an i5 processor OR the top of the range MacBook Air with SSD etc - the guy in the store talked me out of it and I agreed the 13" base model would more than meet my needs. He was right - don't get me wrong! But my needs changed within 2 months!! Once I had played with Garage Band I just had to try out Logic and loved it - then I started finding out all this other cool stuff!
Any advice on how I could squeeze usage of libs like EWQL into my little MBP 13"?
I am not a musical pro - just a hobbyist - so have to justify everything financially nowadays!
Thanks in advance

I have been hitting the credit card recently. Last year I bought a Sony Vaio because I couldn't justify all that money when the new line of MBP's finally came out. Sold it 10 months later - they are meant to be a great build quality? Don't think so!
So, 3 or 4 weeks ago I bought a 13" MBP for browsing and a little mixing with Logic - works nicely - until I start hammering it - but it's good for learning.
Anyway - this new iMac replaced my old 21" 2007 model - wow What a dream!
But you know what I always like, every time I open up one of these boxes? The smell! What is it with Apple? Do they spray something in the box? I think they do!
As for how the migration went - pretty good.
Right now though I still have OS and apps on the 256gb SSD and all the data is now on the 1TB HD. Works so well that I don't know whether there is any point in changing it to be honest. I'm sure I could improve read speed by putting all the logic samples on the SSD but I have over 350gb of them so not sure there's much point!

Similar Messages

  • Load balancing between application server and database

    Hi,
    is there any load balancing between the application server and the database? Consider we have a single instance of an application server that sends database queries from different clients to the database. Are the requests queued in some way at the application server, allowing to control the flow of the queries (e.g. queries from "more important" clients might be sent with a higher priority)?
    Thanks for your help!

    Hi Victor/Jim/Volker,
    Thanks a lot for all the responses..
    Just wanted to let you guys know that my installation finished successfully.
    The thing which confused me was that my Qtime, Qdate and everything else was showing correct values..
    Well, my problem I set the environmental variable PASE_TZ to the EST time zone on a SYS level using WRKENVVAR>F4>SYS and added the variable. I logged off and the sidofr logged off, but one user which should have logged off and didn't was the "SAPINST"(my installation user) which was logged in the subsystem TMKSVR00.
    Even when I had closed the SAPINST installlation program, the user doesn't log off...it just sits there until and unless u shut him out of the system using the option 4 on wrkactjob for ending the JOB(SAPINST logged in the system below the TMKSVR00 subsystem)
    So since the SAPISNT user never logged of, his environmental variables were not initilized properly, even after the changes...
    This thought came to me almost after a 6 hours of wasting my time searching for notes here and there...
    I think when u end/stop the install in SAPINST, the SAPINST user should log off the AS400 system, but I have noticed, it never does...although when u restart the installation, if u have noticed it shows you the log on for the SAPINST user in the TMKSVR screen...
    Its kind of buggy, I would say...
    I have noticed, that even when I log on to AS400 from home or from a remote PC using Emulator, it shows me logged in the subsystem and even after i have logged of, it still shows me there...
    Anyway, thanks a lot guys...for all your responses..
    Just wanted to let you know all.
    Thanks
    Abhi

  • Conflict between the saved data and the sampling rate and samples to read using PXI 6070e

    Hello, I am using PXI 6070e to read an analog voltage. I was sampling at 6.6 MHz and the samples to read were 10. So, that means it should sample 10 points every 1.5 um. The x-axis of the graph on the control panel was showing ns and us scale, which I think because of the fast sampling and acquiring data. I use "write to measurement file" block to save the data. However, the data was saved every 0.4 second and as 35 points data at the beginning of each cycle (e.g. 35 points at 0.4 sec and 35 at 0.8 sec, and so on) and there was no data in between. Can anyone help me how there are 35 reading points every cycle? I could not find the relation between the sampling rate and samples to read, to 35 points every 0.4 second!
    Another thing, do I need to add a filter after acquiring the data (after the DAQ assistant block)? Is there anti-aliasing filter is built in PXI 6070e?
    Thanks for the help in advance,
    Alaeddin

    I'm not seeing anything that points to this issue.  Your DAQ is set to continuous acquire.  I'm not sure if this is really what you want because your DAQ buffer will keep overwriting.  You probably just want to set to Read N Samples.
    I'm not a fan of using the express VIs.  And since you are writing to a TDMS file, I would use the Stream to TDMS option in DAQmx.  If you use the LabVIEW Example Finder, search for "TDMS Log" for a list of some good examples.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Multiple iPhoto Libraries and iPhone syncing

    Hi-
    Thanks for reading. I recently used iPhoto Library Manager from Fatcat (highly recommended) to take a 23,000 photo library and chop it down into several iphoto libraries. It seems that my phone by default wants to sync photos with the original library, and not one of the new ones. I am wondering a few things:
    1. when i hold down the "option" key when opening iphoto i have the choice of opening any of my libraries. Perhaps the iphone will sync to which ever iphoto library i used last???
    2. perhaps iphoto will always recognize my original library as "default" and i need to look into making one of my new libraries the master default?
    Is this possible? Can I create a new iphoto library and use this as default across all apple programs going forward?
    Any clarity on connection between new iphoto libraries and how the computer, and most importantly, my iphone, will recognize them is appreciated. thanks in advance,
    Joe
    Message was edited by: Joseph Walker

    1. when i hold down the "option" key when opening iphoto i have the choice of opening any of my libraries. Perhaps the iphone will sync to which ever iphoto library i used last???
    When you launch iPhoto it opens the last used library - so when you force a launch by connecting a camera or iPhone you will be syncing to the last used library
    LN

  • Opening and closing balance between 2 dates

    hi.
    i am facing a problem while fetching the opening and closing balance for a particular G/L account.
    In my  program  i am entering G/L account for a date range i.e, between two dates and i want opening and closing balance for these 2 date ranges.
    So, please tell me is there any function module to fetch opening and closing balance between two dates.
    Regards,
    ROHINI.K.

    Hi Rohini,
                 Check this FM :   BAPI_GL_GETGLACCPERIODBALANCES.
    If we use this functional module, we will get opening and closing balance of corresponding G/L Acc.
    (e.g)
    CALL FUNCTION 'BAPI_GL_GETGLACCPERIODBALANCES'
        EXPORTING
          companycode                   =  '1000'
          glacct                              = '0000548101'
          fiscalyear                         = '2007'    
         currencytype                      = '10'
       IMPORTING
    BALANCE_CARRIED_FORWARD       =  gs_bal-balance
         RETURN                                        =  v_return
        TABLES
          account_balances                            = gt_bal.

  • Difference in GL Balances between two Standard Report fbl3n and fagll03

    Hi ,
    Mismatch of balances between two standard report ie.fbl3n and fagll03 . We are giving the complete example of what we are facing right now ... please go through the examples .
    ENTRY NO. 1
    We have posted one MIRO , Accounting Posting is as below : -
    PK         Description    Amount       
    86         GR/IR             1000.00               
    31         Vendor           -800.00
    50          TDS               -200.00
    ENTRY NO. 2
    We have Reversed the MIRO through MR8M , Accounting Posting was as below : -
    PK         Description     Amount       
    21         Vendor             800.00
    40          TDS                 200.00
    96          GR/IR            -1000.00
    But in Standard report FAGLL03 , .The line items of above twoi entries under GL " TDS " are showing in this way  : -
    Doc No.      PK      Ammount
    Entry 1       50          -200.00
    Entry 2       40          -200.00 -
    > ?????
    *OPEN ITEMS          - 400.00----
    > ?????
    Although in other Standard report FBL3N , the same are showing correctly as shown below
    Doc No.      PK      Ammount
    Entry 1       50          -200.00
    Entry 2       40          +200.00
    *OPEN ITEMS                0.00
    PLEASE HELP
    Regards
    Soumitra Bhattacharya

    Hi
    FAGLL03 - Display/Change Items (New)  - this report is related to ledger reporting purpose.  this reports is available after ECC 5.0.
    FBL3N - is line item display - this is only GL reports (not in ledger reporting)
    if you find any difference is values please check the report variant you are using and ledger you are activated.
    hope this will help you.
    Regards
    Ram

  • How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

    How do I copy purchases between 2 itunes libraries on the same computer with different log ins and separate apple user ids?

    Load the library which doesn't contain the songs and drag them into the open iTunes application window. If you need to move them between different computer user accounts, put them into /Users/Shared/.
    (74502)

  • Difference in the Balance between FS10N and Customer Balances in Local Curr

    Hi,
    When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
    Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
    What could be the possible reasons for the differences..
    Thanks

    Hi Varshani,
    Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
    SAPF070  - Compare Documents and Account Transaction Figures
    Description
    This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
    A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
    After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
    Output
    The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
    Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
    If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
    SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
    Description
    If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
    Requirements
    All of the following listed requirements must be fulfilled:
    1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
    2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
    3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
    4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
    5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
    Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
    You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
    It is advisable to execute a test run first, which will list any differences that are found.
    Further notes - Authorizations
    Repair program authorization group (F_005)
    Company code authorization         (F_BKPF_BUK)
    Thanks
    Venkata Ganesh Perumalla
    Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM

  • Balance between Vendor balance and GL

    Hi Experts,
    We are in the process on confirming the balance between the subledger recon account and the vendor balances.However,we find that there is a huge difference between the total balances of all the vendors and subledger and the balances do not match.
    Please  let me know as to what could be the possible reasons for this difference.
    Regards,
    Srinivasan.

    Hi
    The most possible reason could be that the reconciliation account has been changed in the vendor master. pls check the totals of all the Reco GL Accounts and the vendor master
    Regards
    Sanil Bhandari

  • Question about load balancing between Portal and ABAP

    Hi,
    I have the problem whit load balancing between Portal and ECC (ERC) ABAP
    Exist two system:
    1) ECC (ERP) ABAP = Backend     Module = HR
    2) EP (JAVA) = Frontend
    The users (9000 users) logon in the EP and run query (data personal) in the ECC.  The problem to all user connect in Central Instance and not in the Dialog Instance.
    How can balancing the conecction HTTP (EP) to ECC (ABAP)??
    I need balancing in the ECC to Dialog Instance

    Jco -> right. Another possibility is that you use iviews that point to the backend in this case you will need to use a load balanced entry for the backend system in the [system landscape|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/8c1e438d7017fce10000000a42189c/frameset.htm] -> SAP_R3_LoadBalancing
    If you have ESS deployed on your portal, you will most probably need to do both.
    Cheers Michael

  • Load-Balancing between Foreign and two Anchors

    Hi, we have two foreign controllers (one active, one standby) and two anchor controllers. All APs are connected to the active foreign controller. The layer 3 networks for the wlan clients on both anchors are different for the same SSID. SSID: Internet, anchor 1: Subnet A, anchor 2: Subnet B. So when a client is getting anchored to Anchor 1, the clients will get an ip from subnet A and when the client is getting anchored to anchor 2, the client will get an ip from subnet B.
    This is so far not a big problem because we only have a few accesspoints in some rooms. But what will happen, when we have a full covered wlan and the client roams from one AP to the other AP? Is there a possibility, that the client will anchored to a different anchor while roaming? I think this will result in a lack of connectivity because without a real disconnect the client will not ask for a new IP address.
    Other question: Is it possible to disable this load-balancing between anchor controllers? Or can i make a client sticky to only one anchor as long as an access-session is established?
    All controllers are 5760 with 3.3.3 software.

    Hi acontes, 
    It's an interesting question. 
    In this case, if all AP's are on WLC-A and there is no possibility that an L3 inter-subnet roam will occur between WLC-A and WLC-B, I would just forward WLC-A to Anchor A and WLC-B (in the event of fail over) to Anchor B (if Anchors reside on different subnets). If you must specify Anchor A and Anchor B on each WLC for redundancy purposes, it's important to understand the guidelines and limitations with regard to Foreign / Anchor Design.  
    As Scott mentioned, the limitation with Anchoring design is that there is no primary / secondary configuration for an Anchor on the Foreign WLC.
    If WLC-A has two entries (1) for Anchor-A and (2) for Anchor-B, the EoIP tunnels are establish and load-balancing occurs in a round robin fashion.
    Keep in mind the following with regard to guest N+1 redundancy:
    •A given foreign controller load balances wireless client connections across the list of anchor controllers configured for the guest WLAN. There is currently no method to designate one anchor as primary with one or more secondary anchors.
    •Wireless clients that are associated with an anchor WLC that becomes unreachable are re-associated with another anchor defined for the WLAN. When this happens, assuming web authentication is being used, the client is redirected to the web portal authentication page and required to re-submit their credentials.
    Since traffic is transported at Layer 2 via EoIP, the first point at which DHCP services can be implemented is either locally on the anchor controller or the controller can relay client DHCP requests to an external server. Since the IP address directly correlates to the DMZ subnet or the interface where the traffic egresses, it is possible for some clients to get IP's from both Subnet A or Subnet B in the event that WLC-A is building EoIP to both anchors.
    1) What happens if my clients roam?
    Nothing... since all AP's are on WLC-A, it's Intra-Controller Roaming
    Each controller supports same-controller client roaming across access points managed by the same controller. This roaming is transparent to the client as the session is sustained, and the client continues using the same DHCP-assigned or client-assigned IP address. The controller provides DHCP functionality with a relay function. Same-controller roaming is supported in single-controller deployments and in multiple-controller deployments.
    Would it be better to choose the same DHCP Pool on both anchors?
    It's probably better to have redundant anchors on the same subnet, but it's not required. 
    3) How would you design this :-)
    WLC-A <--EoIP--> Anchor A (DHCP Pool A)
    WLC-A <--EoIP--> Anchor B (DHCP Pool A)
    It's important to remeber what Scott mentioned about the lack of a primary / secondary relationship. If multiple controllers are added as mobility anchors for a particular WLAN on a foreign controller, the foreign controller internally sorts the controller by their IP address. The controller with the lowest IP address is the first anchor. For example, a typical ordered list would be 172.16.7.25, and 172.16.7.28. If the first client associates to the foreign controller's anchored WLAN, the client database entry is sent to the first anchor controller in the list, the second client is sent to the second controller in the list, and so on, until the end of the anchor list is reached. The process is repeated starting with the first anchor controller.
    If any of the anchor controller is detected to be down, all the clients anchored to the controller are deauthenticated, and the clients then go through the authentication/anchoring process again in a round-robin manner with the remaining controller in the anchor list. This functionality is also extended to regular mobility clients through mobility failover. This feature enables mobility group members to detect failed members and reroute clients.

  • Working and moving photos between two open libraries?

    I'm not sure if it is possible, but can you work in and transfer photos between two open libraries at the same time? It is more an organizational question...i.e. I want to have some photos only appear in a particular library...

    nk3:
    Welcome to the Apple Discussions. You can only have one library open at a time but with iPhoto Library Manager (in the free mode) you can transfer 20 photos at a time between libraries and keep keywords, comments, etc.

  • Differences between  hardware thread and software thread?

    Hi ,all!
    The Instructions of SPARC V9 have nothing about thread ID. And there are two bits of CCX packets indicating thread ID.
    Does it mean that CCX generates the thread ID of SPARC core?
    And, what are the differences between hardware thread and software thread?
    Thanks in advance!

    Hi ,all!
    The Instructions of SPARC V9 have nothing about
    thread ID. And there are two bits of CCX packets
    indicating thread ID.
    Does it mean that CCX generates the thread ID
    of SPARC core? Each SPARC core has one unique ID to identify itself when it receives packets, such as CCX packets, interupt packets and so on. Such ID is defined in the Hyperprivileged register. Maybe you can see UA2005-current-draft-HP-EXT.pdf for more information.
    And, what are the differences between hardware
    thread and software thread?
    Thanks in advance!Software thread runs on the hardware thread (or strand).

  • Record and sample libraries from same HD?

    My question is would it be okay if I for example used one large external hard drive and made 2 partitions - one partition for recording into logic and the other for streaming sample libraries. Is this a no no? Or, should I have 2 external hd's - one dedicated to logic recording and one for sample libraries?
    I would like to just get one large hd if possible - so I won't have to lug around 2
    Cheers

    Hi
    Generally, it is not a good idea to have samples streaming from the same drive as the audio (project) material... (though it would depend on the nature of the project (predominantly samples or predominantly audio files).
    With 'standard' rotating HD's rather than SSD's, the drive would end up being slower because it was trying to find data from several places at the same time. Partitioning the drive would not help in this sort of situation either since the drive head would have to try to read/write to separate partitions at the same time.
    With SSD's, the read/write speeds are so much faster that for most purposes one drive would suffice (provided that the external drive to Mac connection was fast enough to cope (Thunderbolt). No need to partition. You *might* get away with a FW800 connection, but you would not be getting the best from the SSD.
    You run into similar issues with external (rotating) RAID drives... the overall speed depends on the controllers/connection bus (FW800 vs USB 3 vs Thunderbolt etc)  as well as the speed of the drives themselves.
    CCT

  • [svn:osmf:] 16216: Initial check-in of VAST2 and VPAID sample libraries.

    Revision: 16216
    Revision: 16216
    Author:   [email protected]
    Date:     2010-05-19 10:30:45 -0700 (Wed, 19 May 2010)
    Log Message:
    Initial check-in of VAST2 and VPAID sample libraries.  Note that the previous implementation of VAST (and MAST) remains untouched, with the VAST2/VPAID-enabled implementations being added side-by-side with a "New" suffix.  In the long term, we plan to merge the duplicate libraries/plugins.
    Added Paths:
        osmf/trunk/apps/samples/libs/VASTNewSample/
        osmf/trunk/apps/samples/libs/VASTNewSample/.actionScriptProperties
        osmf/trunk/apps/samples/libs/VASTNewSample/.project
        osmf/trunk/apps/samples/libs/VASTNewSample/readme.txt
        osmf/trunk/apps/samples/libs/VASTNewSample/src/
        osmf/trunk/apps/samples/libs/VASTNewSample/src/VASTNewSample.as
        osmf/trunk/apps/samples/libs/VASTNewSample/src/VASTNewSample.fla
        osmf/trunk/apps/samples/libs/VPAIDAdSequencingUnitTest/
        osmf/trunk/apps/samples/libs/VPAIDAdSequencingUnitTest/.actionScriptProperties
        osmf/trunk/apps/samples/libs/VPAIDAdSequencingUnitTest/.project
        osmf/trunk/apps/samples/libs/VPAIDAdSequencingUnitTest/readme.txt
        osmf/trunk/apps/samples/libs/VPAIDAdSequencingUnitTest/src/
        osmf/trunk/apps/samples/libs/VPAIDAdSequencingUnitTest/src/VPAIDTestPlayer.fla
        osmf/trunk/apps/samples/libs/VPAIDAdSequencingUnitTest/src/VPAIDTestplayer.as
        osmf/trunk/apps/samples/libs/VPAIDNoAdUnitTest/
        osmf/trunk/apps/samples/libs/VPAIDNoAdUnitTest/.actionScriptProperties
        osmf/trunk/apps/samples/libs/VPAIDNoAdUnitTest/.project
        osmf/trunk/apps/samples/libs/VPAIDNoAdUnitTest/readme.txt
        osmf/trunk/apps/samples/libs/VPAIDNoAdUnitTest/src/
        osmf/trunk/apps/samples/libs/VPAIDNoAdUnitTest/src/VPAIDTestPlayer.fla
        osmf/trunk/apps/samples/libs/VPAIDNoAdUnitTest/src/VPAIDTestplayer.as
        osmf/trunk/apps/samples/plugins/MASTSampleNew/
        osmf/trunk/apps/samples/plugins/MASTSampleNew/.actionScriptProperties
        osmf/trunk/apps/samples/plugins/MASTSampleNew/.project
        osmf/trunk/apps/samples/plugins/MASTSampleNew/MASTSample-build-config.xml
        osmf/trunk/apps/samples/plugins/MASTSampleNew/MASTSample.fla
        osmf/trunk/apps/samples/plugins/MASTSampleNew/MASTSample.html
        osmf/trunk/apps/samples/plugins/MASTSampleNew/html-template/
        osmf/trunk/apps/samples/plugins/MASTSampleNew/html-template/AC_OETags.js
        osmf/trunk/apps/samples/plugins/MASTSampleNew/html-template/history/
        osmf/trunk/apps/samples/plugins/MASTSampleNew/html-template/history/history.css
        osmf/trunk/apps/samples/plugins/MASTSampleNew/html-template/history/history.js
        osmf/trunk/apps/samples/plugins/MASTSampleNew/html-template/history/historyFrame.html
        osmf/trunk/apps/samples/plugins/MASTSampleNew/html-template/index.template.html
        osmf/trunk/apps/samples/plugins/MASTSampleNew/html-template/playerProductInstall.swf
        osmf/trunk/apps/samples/plugins/MASTSampleNew/publish_settings.xml
        osmf/trunk/apps/samples/plugins/MASTSampleNew/readme.txt
        osmf/trunk/apps/samples/plugins/MASTSampleNew/src/
        osmf/trunk/apps/samples/plugins/MASTSampleNew/src/MASTSample.as
        osmf/trunk/libs/samples/VASTNew/
        osmf/trunk/libs/samples/VASTNew/.actionScriptProperties
        osmf/trunk/libs/samples/VASTNew/.flexLibProperties
        osmf/trunk/libs/samples/VASTNew/.project
        osmf/trunk/libs/samples/VASTNew/org/
        osmf/trunk/libs/samples/VASTNew/org/osmf/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/loader/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/loader/VAST1DocumentProcessor.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/loader/VAST2DocumentProcessor.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/loader/VASTDocumentProcessedEvent.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/loader/VASTDocumentProcessor.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/loader/VASTLoadTrait.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/loader/VASTLoader.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/CacheBuster.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/CompanionElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/DefaultVAST2MediaFileResolver.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/DefaultVASTMediaFileResolver.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/ICacheBuster.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/IVAST2MediaFileResolver.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/IVASTMediaFileResolver.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/VAST1MediaGenerator.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/VAST2ImpressionProxyElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/VAST2MediaGenerator.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/VAST2TrackingProxyElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/VASTImpressionProxyElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/VASTMediaGenerator.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/media/VASTTrackingProxyElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/metadata/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/metadata/VASTMetadata.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VAST2MediaFile.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VAST2Translator.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTAd.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTAdBase.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTAdPackageBase.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTCompanionAd.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTDataObject.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTDocument.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTInlineAd.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTMediaFile.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTNonLinearAd.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTResourceType.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTTrackingEvent.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTTrackingEventType.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTUrl.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTVideo.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTVideoClick.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/model/VASTWrapperAd.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/VAST1Parser.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/VAST2Parser.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/VASTParser.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/Parser.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/TagParserBase.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/VAST2CompanionElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/VAST2CreativeElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/VAST2Element.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/VAST2InLineElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/VAST2LinearElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/VAST2NonLinearElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/VAST2Time.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/VAST2TrackingData.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/VAST2WrapperElement.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/errors/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/errors/Errors.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/errors/ParserErrors.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/events/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/events/ParserErrorEvent.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/events/ParserEvent.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/interfaces/
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/interfaces/IParser.as
        osmf/trunk/libs/samples/VASTNew/org/osmf/vast/parser/base/interfaces/ITagParserBase.as
        osmf/trunk/libs/samples/VASTNew/vast-build-config.flex
        osmf/trunk/libs/samples/VASTNew/vast-build-config.flexcov
        osmf/trunk/libs/samples/VASTNew/vast-build-config.xml
        osmf/trunk/libs/samples/VPAID/
        osmf/trunk/libs/samples/VPAID/.actionScriptProperties
        osmf/trunk/libs/samples/VPAID/.flexLibProperties
        osmf/trunk/libs/samples/VPAID/.project
        osmf/trunk/libs/samples/VPAID/org/
        osmf/trunk/libs/samples/VPAID/org/osmf/
        osmf/trunk/libs/samples/VPAID/org/osmf/.actionScriptProperties
        osmf/trunk/libs/samples/VPAID/org/osmf/.flexLibProperties
        osmf/trunk/libs/samples/VPAID/org/osmf/.project
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/elements/
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/elements/VPAIDElement.as
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/events/
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/events/VPAIDEvent.as
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/events/VPAIDLoadEvent.as
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/media/
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/media/IVPAID.as
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/metadata/
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/metadata/VPAIDMetadata.as
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/model/
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/model/IVPAIDBase.as
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/model/VPAID_1_1.as
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/traits/
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/traits/VPAIDLoadTrait.as
        osmf/trunk/libs/samples/VPAID/org/osmf/vpaid/traits/VPAIDTimeTrait.as
        osmf/trunk/plugins/samples/MASTPluginNew/
        osmf/trunk/plugins/samples/MASTPluginNew/.actionScriptProperties
        osmf/trunk/plugins/samples/MASTPluginNew/.project
        osmf/trunk/plugins/samples/MASTPluginNew/MASTPlugin.as
        osmf/trunk/plugins/samples/MASTPluginNew/html-template/
        osmf/trunk/plugins/samples/MASTPluginNew/html-template/AC_OETags.js
        osmf/trunk/plugins/samples/MASTPluginNew/html-template/history/
        osmf/trunk/plugins/samples/MASTPluginNew/html-template/history/history.css
        osmf/trunk/plugins/samples/MASTPluginNew/html-template/history/history.js
        osmf/trunk/plugins/samples/MASTPluginNew/html-template/history/historyFrame.html
        osmf/trunk/plugins/samples/MASTPluginNew/html-template/index.template.html
        osmf/trunk/plugins/samples/MASTPluginNew/html-template/playerProductInstall.swf
        osmf/trunk/plugins/samples/MASTPluginNew/org/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/MASTPluginInfo.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/adapter/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/adapter/MASTAdapter.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/loader/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/loader/MASTDocumentProcessedEvent. as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/loader/MASTDocumentProcessor.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/loader/MASTLoadTrait.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/loader/MASTLoader.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/managers/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/managers/MASTConditionManager.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/media/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/media/MASTProxyElement.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/model/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/model/MASTCondition.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/model/MASTDocument.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/model/MASTSource.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/model/MASTTarget.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/model/MASTTrigger.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/parser/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/parser/MASTParser.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/traits/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/traits/MASTPlayTrait.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/types/
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/types/MASTConditionOperator.as
        osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/types/MASTConditionType.as

    Hi Marius,
    I think this problem could be linked to the changes in the layout API and the order of the loading of the video elements.
    Please try to add layoutmetadata with index property to parallel videos so they render in the correct order, something like:
                var layout1:LayoutMetadata = new LayoutMetadata();
                layout1.index= 10 ;
                videoElement.addMetadata(LayoutMetadata.LAYOUT_NAMESPACE, layout1);
                var layout2:LayoutMetadata = new LayoutMetadata();
                 layout2.index= 20 ;
                 vpaidNonLinear.addMetadata(LayoutMetadata.LAYOUT_NAMESPACE, layout2);
    Tell me if that worked,
    S.

Maybe you are looking for

  • Drag drop photo import to aperture folder why auto new project folder appear .

    i do import photos from desktop  to folder that i want in the aperture libary  . as soon as i drag and drop photos automatically new peoject folder appear in the libabry as name untitled project.. why? i dont want that new project folder.  i try to d

  • New iPad And Itunes With an Ipod Touch

    I currently have an Ipod Touch which I use and connect with to my backup PC. I want to purchase a new iPad and use it with my new PC running windows 7 and obviously another version of iTunes. Can I do this and log into my itunes account on both of my

  • How do I know if my queue is stopped?

    Hi all, 11.2.0.1 Our end-users is complaining that she has queue and dequeue error. I run this command: EXEC DBMS_AQADM.START_QUEUE(queue_name => 'MERCHANT_NOTIFY_Q'); EXEC DBMS_AQADM.START_QUEUE(queue_name => 'AQ$_MERCHANT_NOTIFY_QT_E', enqueue => f

  • Relation between the Height in Pixels and Font Size?

    Hi All, I wanted to find the relation between the Font Size and the Pixels that it will occupy. What i want to do is i have an Icon and a Label. The icon size i need to resize to the Half the height of the Label. But the font Size does not reflect th

  • What online file converter do you recommend?

    Does anyone have a good free file converter that you have downloaded from online?  I don't want to get stuck with some type of virus, etc.  Thanks!