Balance carry forward problem in Global company currency -USD (FS10)

Dear Experts,
We are facing the problem in balance carry forward since 2008 to 2011
We are maintaing two curriencies for one company code like  1.Loc.currency(SGD), 2.Global company currency(USD) 
But system is carry forwarded 1.Loc.currency(SGD) correctly but problem is in Global company currency(USD)
System is not correctly forwarded Global company currency(USD) it is forwarding different amounts in USD
Like Global company currency(USD)  2008 carry forwarded amount : 45,890.64  (Account balance: 27,105.00-)
It shows Balance carried forward on: 2009 : 30,765.29-   (Account balance : 45,867.87-)
It shows Balance carried forward on: 2010 : 32,814.91-  (Account balance : 34,157.89-)
It shows Balance carried forward on: 2011: 124.75-      (on 2010 Fiscal year system is picking only on March)  
Pls help
Regards,
Hari Prasad

Dear Murali,
We are not using ECC-6 we are using 4.6B
Pls give the resolution based this 4.6B
Regards,
Hari

Similar Messages

  • Balance Carry-Forward Problem for Subledger Accounts

    Hi Experts,
    We are doing the Balance Carry-Forward this Year 2012 and we are having problems with the amount to be carry-over of AP/AR Subledgers for this year. We checked the C/F Balance for G/L and there are no problems.
    When I go to tables KNC1 or LFC1, I see items for both years 2011 and 2012 with a Balance Carry-over value. So during my Balance-Carry Over calculation during debug, it gets the value in KNC1 or LFC1 for 2011 then subtracted with the value in KNC1 or LFC1 in 2012. Why is this happening? Supposedly the 2012 entry on KNC1 or LFC1 should not exist yet right?
    Also the entry on 2012 C/F Balance should only be under the 2011 Posting as the Document Entry has the Posting Period 12 2011. Right now the Posted Entry is in C/F Balance 2011 and 2012 as well. Is this how the Balance C/F Posting works?
    Please enlighten me on how SAP works on this one.
    Thank you so much!

    Hi,
    Why you need to do debugging for F.07?
    If you have inconsistancy in your opening bal and closing balances, you can anyhow run the carryforward program again sequentially for 2010, 2011...for GL/AR/AP
    Now check closing balance for FY 2011 and compare the same with opening bal of FY 2012.
    Regards,
    Srinu

  • Balance carry forward - Problem

    Dear Freinds,
    We have not done balance carry forward in our company code yet.
    our FY is Jan to Dec.
    IN FAGLB03, I noticed that some figures are sitting as balance carry forward which is not correct figure.
    Please advise the reason for this.
    Thanks.
    Sunil.

    Hi Sunil,
    Please carryforward balances with using of below mentioned transaction codes.
    1 .FAGLGVTR.............Balance carryforward for Balance sheet Items
    2. F.07 CARRY FORWARD RECEIVABLE AND PAYABLES
    So that your balances will tally
    Rgds
    SumaMani

  • Balance Carried Forward problem

    Hi Experts,
    when running the Ledger for one range of posting period, the customeru2019s line items and cumulative balances are separated into 2 different reconciliation accounts.
    While running for the next yearu2019s posting period , the Carry Forward Balances of Customers from previous year are aggregiated into one G/L account ,other account 0 balance is carried forwarded.
    My program is fetching from table KNC1 which will have Balance carry forward of the two combined accounts which is going to 1st account.
    Please let me know any table or FM where I can get Balance Carry Forward with passing Fiscal Year, Customer Code, GL Account_.( KNC1 table doesn't help in my case)_
    Please let me know.
    Thanks and Regards,
    Kiran.

    First look at [Fiscal Year Change Documents|https://websmp105.sap-ag.de/fiscalyearchange]
    Then look for those BAPI
    - BAPI_AR_ACC_GETCURRENTBALANCE  Closing balance of customer account in current fiscal year       
    - BAPI_AR_ACC_GETKEYDATEBALANCE  Customer account balance at a key date                           
    Regards

  • Leave Balance Carry forward problem

    Hello experts,
    Actually i found many threads which alredy posted but could not able to found solution for my scenario.
    we are having PCRs and doing Time evaluation in negative time mangement for carry forwarding quota balance, and Balances are forwarding to next year properly.
    But problem is, last year balance should be set by that remain amount and balance is transfered to next year.
    e.g.  if i have Entitilement as 53 and used 17 for the year 2010. now am doing time evaluation to transfer the remain balance that is 36 to next year, and its carry forwarding to 2011 is ok. Now i want that Entitlement 53 for 2010 will set to 17 also. So, the system will carry forward the balance as well as that balance is deducted from previous enttilement also, in short how much is transfered that much deducted from previous entitlement.
    So, i need to change that PCR.
    Note:This requirement is suggested because, there was a problem when we do leave encashment using infotype 0416, it will deduct the quota compansation amount from proper year with available quota.
    Please help me..
    -Jagdish
    Edited by: Jagdish Rakholiya on Dec 28, 2011 11:55 AM

    Jagadish,
    in short how much is transfered that much deducted from previous entitlement.
    it means you want to transfer the used leaves number to next year. is it?
    its so confusing please elaborate simply.
    regards,
    mohammed

  • Balance Carry Forward

    Hi Gurus,
    We have just executed the balance carry forward to 2011 ( AP, AR, GL )
    AP and AR - F.07
    GL - FAGLGVTR
    But after we have executed the balance carryforward, we can no longer view the actual line items of 2010 in some reports like KE5Z.
    It says that no data was found. But if you check in FBL3n the data can be displayed.
    Thanks,
    Ellicec

    We are operating two company codes. Company A and B.  We followed the same steps in executing the Balance carry forward for both the company codes but in Company A we cannot display the actual line items.
    Edited by: Ellicec on Jan 26, 2011 8:39 AM

  • Balance Carry Forward in Accrual Engene: "No matching data found in fiscal"

    Hi,
    I have executed ACACCARRYFORWARD (Balance Carry Forward in Accrual Engine) to 2011 and I have success message on screen of Overview of Balances Carried Forward.
    But, when I execute Start Periodic Accrual Run (manual  accruals) for 31 January 2011 I have error message "Processing not posible on 31.12.2011 - Fiscal Year 2011 not carried forward", and then I execute again ACACCARRYFORWARD to 2011 but now, I have massege "No matching data found in fiscal year before 2011".
    For more information when I execute ACACCARRYFORWARD for the first, I haven't maintain no range for 2011 (ACEPS_RUNID-Define Number Ranges for Periodic Posting Runs; ACAC_ACEPS_APPLLOG-Define Number Ranges for Application Log ; ACEPS_ACEDOCNR-Define Number Ranges for Accrual Engine Documents; ACEPS_AWREF-Define Number Ranges for Assigning ACC Doc. to ACE Doc.)
    Please help me !!
    Thank you verry much.
    Suryadi.

    We are operating two company codes. Company A and B.  We followed the same steps in executing the Balance carry forward for both the company codes but in Company A we cannot display the actual line items.
    Edited by: Ellicec on Jan 26, 2011 8:39 AM

  • Balance Carried Forward in Document Currency

    Hi, Experts,
    In My Customer Account Statement I need the Field in
    "Balance Carried Forward in Document Currency"
    Present in my Report "Balance Carried Forward in Local Currency"
    In this field Having the table KNC1. But in this table "Balance Carried Forward in Document Currency" field is not there i need this field.
    Thanks & Regards,
    Sreedhar.

    Hi,
    As long as both the Document and Local currencies are same, the fields
    "Balance Carried Forward in Document Currency"
    and
    "Balance Carried Forward in Local Currency"
    are same.
    So first check both the currencies are same or different.
    check for the WRBTR field in fi Tables LIKE BSID,BSAD this is the doc currency
    and the field DMBTR is the local currency field.
    reward if useful
    regards,
    Anji

  • New GL implemented, problems in F.01 and trail balance report and balance carry forward.

    Dear Friends,
    One of the my client recently implemented New GL in the Dev system, and getting posted the documents. now we are facing the many problems in the Dev system.
    1. F.01 Financial statement report not generating for the year 2008 to till 2014 fiscal years.
    2. the same in trail balance also not generating data form the year 2008 to till 2014 fiscal years.
    3.system is asking the carry forward the balances form the 2008 to till, when we try to carry forward the 2008 year amount only forwarding for the all the fiscal year, not adding the other balances.
    i went through some forums and i did the some analysis on this, after implementing new GL the table GLT0 was desble, data was not updated in the GLT0 all the data has been moved to FAGLFLEXT table. later i activated the table GLT0 and able to storing the data both the tables.
    now i want to see the all my privious year report in the DEV system. all the data is there in the tables expect GLT0. how can i recover reports as well as how can i do the carry forward balances?
    even still i have not carry forward for the 2014 balances, those balances also not there in the reports? but data is there in the table.
    Please help me on this.
    Regards,
    Krish

    Hello,
    balance carry forward is done with TCd.
    FAGLGVTR
    when you are on SAP nGL.
    any further quesitions?
    By the way why don´t you do searching?
    all the best erwin

  • Problem after balance carry forward with t-code: FAGLGVTR

    Hi,
    I have run that t-code: FAGLGVTR for balance carry forward. Balance transferred correct according to GL Account but when I run t-code u201CS_ALR_87012082u201D for vendor balance for respective recon GL code its show difference. Please let me know how I am make it OK.
    Thanks & Regards,
    Hemant Maurya

    Hi hemant,
    There might be some differences between Recon Gl account & individual vendor balances, this is because when you do the FAGLGVTR & after dat again if u post some open invoices then in Recon.Gl account,balances will get automatically updated but not in vendor balances so what you have to do is RUN F.08 again & carry forward the vendor balances then only both these will be on same platform.
    Thanks & Regards
    Anuj Agarwal

  • GL balance carry forward special period 13 to new fiscal year and Rec acct

    Hi,
    would like to seek for your advice as below question/problem.
    a) User now is doing the year end closing. Normally the closing is up to the period 12 and for the purpose of track the adjustments made by the management and auditors user post to period 13 2008 from the pervious financial year. Our concern is when perform the GL Balance carry forward to new fiscal year which is 2009 does the system carry forward the GL adjustment figure from period 13 to the new fiscal year on top of that when we perform the GL balance carry forward to new fiscal year 2009 and later on find out there is an audit adjustment that need to done and user post in the period 13 fiscal year 2008 can the adjustment auto post to the new fiscal year?
    b) Can we change the Rec account in the vendor master as currently user need to change the vendor from difference Rec account which from joint venture to subsidiary account code? If involve the SPRO configuration how where should we configure? After we change the configuration does all the posting from one Rec account subsidiary will auto post to another Rec account Joint venture?
    Kindly advice.

    Hi,
    Thank you for the prompt reply.
    a)could you provide the path/T-code to view the  vendor master activity screen layout configuration field status for reconciliation account should be Optional.
    b)Beside,what the impact of change the reconciliation account from one to another? It is neccesary/must to do the balance sheet adjustment for change the reconcilation account?
    Can we post the balance through the manual JV (F.02)with the document type is ZD(Debit Note) to post the balance of old reconciliation account to the clearing account and then change of the reconciliation account to the new account then reverse the posting of the JV? By doing so what is the impact in the system? In this scenarion do we need to do the balance sheet adjustment?
    c) You mention balances from the old recon will not be posted to the new reconcilation account unless I do a balance sheet adjustment it is mean after I run the balance sheet adjustment the balance from the old reconcilation account will auto post to the new reconcilation? What other impact will effect the system?
    d) If the company never run the balance sheet adjustment before and due to the scenerion mention above they run the balance sheet adjustment for the first time what are the impact in the system for the company that only have one business area and also for the company which have more than one business area?
    e) What are the prerequisite step/configuation/setting need to be setup in order to run the balance sheet adjustment as the company perviously never run the balance sheet adjustment before? Kindly provide reference/document/guide.
    e) Change of reconcilation account does it related/impact to the account group of vendor master?
    Please help.

  • How to know whether balance carry forward has happened or not

    How to know , whether balance carry forward has happened or not for a perticular GL account or for the company code as a whole?

    If the account is a balance sheet account, you can merely look at the beginning balance for the same balance sheet account for the beginning of the next fiscal year FS10N. The beginning balance will equal the previous year's ending balance. Since this does not happen automatically, you will know that carry forward has not been done if a balance sheet account has no beginning balance in the following fiscal year.
    If you are talking about For P&L GL accounts, you can check the acvitity in the retained earnings accounts to make sure that they have been updated for the P&L activity. You can identify the retained earnings account by looking at the master data for the account in the section "P&L statmt acct type" and pulling up the menu to see the actual retained earnings account number.
    You can perform carry foward (GVTR) as many times as you want but normally once it has been ran, any postings to a  previous fiscal year are automatically carried forward to the current year after that initial run.

  • Profit Centre Accounting Balance Carry Forward

    Hi
    I used report painter to create my own report to show the TB by profit centre. But the when you drill down on certain balance sheet account the actual line items date back to as far as 2004. Is it because we have done a balance carry  forward? How can we correct this? If we do a balance carry forward at year-end will that correct the problem or can we do it now?
    Points will be awarded.
    Thanks

    Dear Noz
    Can u plz tell me which version ur using?
    I know the standard Transaction code which can be helpful ti u
    Regards
    Dnyanesh

  • Balance Carry Forward To wrong account

    Hi,
    When we do balance carry forward to the next fiscal year via Tcode: GVTR, it gives a message 'balance carry forward to fiscal year 2005 successfully'
    But when we display trial balance report, the balance is carried forward to the same P&L account instead of Retained Earnings account.
    The balance in the Retained Earnings account remains unaffected for Eg. 2004 as compared to 2005, the closing balance of 2004 is same as the opening balance of 2005, there is no change.
    We just upgraded to mySAP ERP last month.
    Any assistance would be greatly appreciated
    Thanks

    Hi,
    In Financial Accounting Global Settings menu, go to the Tools section. There is a menu option for "Deactivate Update of Classic General Ledger (GLT0)". Check whether the update of GLT0 has been deactivated or not at this point.
    Hope it helps.
    Ramanand

  • Reg balance Carried forward in F.27 Accounting Statement Print

    Hi experts,
    We have generated a SAP Script for Accounting Statement print ( F.27 ) for vendors. We have used structure RF140 for
    the necessary fields. For balance carried forward, SALDO in RF140 structure( balance in document currency ) gives
    me the correct value. But i'm unable to trace whether the balance carried forward is debit or credit. How to check whether
    this balance is debit or credit.
    Thanks in Advance.
    Regards,
    Farhanaz.

    hi ,
    check tcode FK10 might help you.
    regards
    Prabhu

Maybe you are looking for

  • Performance

    Hi gurus, I got some performance related doubts. 1. In a "select" statement if I change the order of columns will it lower the performance ? eg: select posnr vbeln matnr from vbap... 2. How much percentage of performance will be suffering if I use "i

  • Recommendations on good external CD writer?

    I am going to buy an external CD writer for my iMac G5. Can any of you recommend a brand and type that has worked well for you? Best dependability? Best software included?? Thanks.

  • Ipod Classic audiobook trouble

    Ok, so in an effort to separate my books from my music I have spent weeks (I have a lot of audiobooks) combining my multiple track books into one file for each book.  So now, they show up in the audiobooks section of my ipod in alphabetical order by

  • Might Mouse problem

    Hi! I have a wirless (bluetooth) mighty mouse. Using the scroll button, it will scroll down, but not up. I've replaced the batteries and restarted the system, same behavior. Is it dead? If so, any idea how long the warranty is? Thanks! texas_spn

  • About Skin library...

    Do you know where I can download Skin library and how I can show that library to JBuilder 7.0 ???