Balance in Transaction Currency error in J1IH
hi experts,
I'm doing transaction J1IH,under which i clicked 'other adj'.When i do the proceedings and at the end it gives me the following error 'Balance in Transaction Currency'.
PLs help.
Gaurav
Hi
You need to give the Cenvat on Hold account for accumulation of the balance 50% credit to be availed in the next financial year.This has to be given in the following path in config
Logistics General - Tax on Goods movements - India - Account Determination - Specify GL Accounts per Excise Transaction and enter the Cenvat on Hold account against Excise transaction type DIEX for the excise group, company code combination.
Reward points if found useful.
Regards,
K Lakshmanan
Similar Messages
-
Balance in transaction currency error for AUC settlement
I was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
Or perhaps am I heading to the right way in identifying the root cause of this issue?
This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
Any positive reply is welcomed!
I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
[Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AMI was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
Or perhaps am I heading to the right way in identifying the root cause of this issue?
This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
Any positive reply is welcomed!
I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
[Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AM -
J1IEX: Balance in Transaction Currency ERROR
All SAP Gurus,
While doing J1IEX: Balance in Transaction Currency ERROR occurs.
This happens only when figures are not even in case of capital goods credit.
Which SAP Note to be applied so that, system will accept odd figures too.
Regards,Hi Rajan, Check the following threads :
Balance in transaction currency
Re: Balance in transaction currency Error -
Balance in transaction currency error
Hi Friends,
In order to ressolve "Balance in transaction currency" error during J1IIN, we have applied oss notes 1018071 & 978186. However we are getting same promblem
Please help on this.Hi shiv,
Kindly refer this threads,
Balance in transaction currency
Error : Balance in Transaction Currency
Error F5702 Balance in transaction currency VF01
Re: Balance in Transaction Currency
error in Balance in transaction currency
Balance in transaction currency
Thanks,
Swamy H P -
"Balance in transaction currency" Error in Depreciation Posting Run-AFAB
Hi,
We are having unit testing going on during ECC6.0 upgrade.I am getting following error while posting Asset Depreciation -AFAB.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'AUD' with the following details:
Exchange rate '00', amount ' 467.00-' and currency key 'AUD'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please advise what can be the reason of this issue.
Thanks & Regards,
Prince KochharHi shiv,
Kindly refer this threads,
Balance in transaction currency
Error : Balance in Transaction Currency
Error F5702 Balance in transaction currency VF01
Re: Balance in Transaction Currency
error in Balance in transaction currency
Balance in transaction currency
Thanks,
Swamy H P -
Balance in transaction currency error in sap j1iin
Hi,
I am facing an error during creation of excise of 'balance in transaction currency error in sap j1iin'.But when we are creating EI in background the system is not getiing the error of Balance in transaction currency error.
We have applied the Note# 1018071 - Error "Balance in transaction currency" (F5702) in J1IIN has been applied. This covers the correction for note # 978186.
But the system is still giving me the error in forground.
I have the serach the forum:
1-Excise Invoice Error In J1IIn
2-Balance in transaction currency error in J1iin
But unable to find the solution.Kindly guide me on this.
Regards
RajevHi Srinath,
Thanks For Reply.
Please find my comment on above points:
1-SPRO -> Logistics - General -> Tax on Goods Movements -> India -> Basic Settings -> Maintain Company Code Settings. In the Company Code check wheather Rounding rule is on or off.If it is off , change it to on and then run again.
**I have make the rounding rule on for outgoing excise Invoice**
2) SPRO->Excise config->Business transaction-> Utilization-> in utilization you have 2 options First option is Utilization Determination & another one is Maintain minimum Balances for Excise Account.Change the Utilization Determination to 100
I have maintained the setting as per below:
For Utilization Determination
L1 PLAAT1 PLA AT1 account 100
L1 PLABED PLA BED account 100
L1 PLACESS PLA cess account 100
L1 RG23AAT1 RG 23A AT1 account 100
L1 RG23ABED RG 23A BED account 100
L1 RG23AECS RG 23A ECS account 100
L1 RG23CAT1 RG 23C AT1 account 100
L1 RG23CBED RG 23C BED account 100
L1 RG23CECS RG 23C ECS account 100
Maintain Balances
L1 PLAAT1 PLA AT1 account 100,000.00
L1 PLABED PLA BED account 100,000.00
L1 PLAECS PLA ECS account 100,000.00
L1 RG23AAT1 RG 23A AT1 account 100,000.00
L1 RG23ABED RG 23A BED account 100,000.00
L1 RG23AECS RG 23A ECS account 100,000.00
L1 RG23CAT1 RG 23C AT1 account 100,000.00
L1 RG23CBED RG 23C BED account 100,000.00
L1 RG23CECS RG 23C ECS account 100,000.00
3) Also check IMG->Logistics General- >Tax on Goods Movements->India->Account Determination->Specify Excise Accounts per Excise Transaction.
Check all the ETT having the ECS and Secondary Education Cess.
But still facing the same error.Could please guide me on this.
Thanks for Your responce.
Reagrds
Rajev. -
J2iun Balance in Transaction currency error
Dear Experts,
I am facing a problem in J2iun balance in transaction currency. Message no. F5 702
I checked the entry in simulation mode, its not equal to Debit and credits, the entry as below
Dr ED payable 4,971.00
Dr Cess payable 99.00
Cr RG 23A ED Cenvat Account 4,971.00
Cr RG23A EC Account 99.00
Cr loans 50.37
i want to know the actual entry while do the j2iun. and what correction i need to do in j1it GL Assignments.
i will appreciate your immaidate response.
regards,
Gopi.PHi,
Please check the assignments which you have done for excise transactio type UTLZ.
After that assign proper G/Ls in account determination for the same.
It seems, some account are not assigned to UTLZ, that's why system is giving this error as your debit & credit amount should be equal (Dr & Cr)
Regards,
Piyush -
Balance in transaction currency error in J1iin
Hi Gurus
System is throwing an error while trying to create an excise invoice.
FI/CO interface: Balance in transaction currency
Message no. RW022
Diagnosis
The balances in transaction currency must be zero for each logical transaction when transferring to the FI/CO interface. A balance of " 10.00" "INR" was determined for the logical transaction "".
Any soutions??
regards
sidhuGo to IMG path Logistics - General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction.
There ensure that all Excise accounts are maintained for ECess and HECess. At times, system will throw the error in case you have missed to maintain the required setting.
Still if you have issue, apply the source code correction as detailed in the following note
Note 845822 - Error "Balance In trnsaction currency" (F5 702) in j1iin
G. Lakshmipathi -
Balance in transaction currency Error Message no. F5702
Dear all I need some help in order to make an invoice.
When I try to release to accounting for an invoice the system send me the following error.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'MXN' with the following details:
Exchange rate '00', amount ' 1.115,50-' and currency key 'MXN'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please if anybody knows how fix this error tell me.
ThanksDear,
For this issue .. You have to use SAP NOTE..
Check out bellow notes..
Note 740565 - Balance in transaction currency w/ SCS document
772955 - Part-inclusive rent
753737 - RO from different BEs and one AP condition each
737300 - Tax calculation for multilevel tax codes
736210 - Tax account not determined correctly
Please refer this thread,
error : balance in transaction currency
Regards,
R.Brahmankar -
Balance in Transaction Currency Error while Running J2IUN
Dear Expert,
Hope you all must be doing great.
While running the J2IUN transaction, System is generating Balance in Transaction currency becouse Cr PLA HECess repeatation.Here Credit side is 600 higher than Debit entry.please find the details of Accounting entry of Utilization.
Dr 0000168204 92,667.36 Excise Duty Payable(S&H Education Cess)1%
Dr 0000168200 9,266,733.62 Excise Duty Payable
Dr 0000168205 185,334.71 Excise Duty Payable(Education Cess)
Cr 0000168210 1,300.00 Excise - PLA Depositable
Cr 0000168215 400.00 Excise - PLA Depositable(Education Cess)
Cr 0000168227 300.00 Excise - PLA Depositable(S&H Education Cess 1 %)
Cr 0000168227 300.00 Excise - PLA Depositable(S&H Education Cess 1 %)
Cr 0000168227 300.00 Excise - PLA Depositable(S&H Education Cess 1 %)
Cr 0000120030 9,265,433.62 Service Tax- Plant @ 10%
Cr 0000120035 184,934.71 Service Tax- Plant -Ecess @ 2%
Cr 0000120033 92,367.36 Service Tax- Plant -S&H Ed Cess @ 1%
Please help me.
With Regards,
Manoj SinghHi
Check settings in
SPRO - Logistics general - Tax on Goods movements - India - Basic settings - India - Account Determination - Specify Excise Accounts per Excise Transaction
(the duplication could come from here)
and also check for GL assignments in next step
Thank You, -
Balance in transaction currency Error while using J2IUN
Dear Expert,
Hope you all must be doing great.
While running the J2IUN transaction, System is generating Balance in Transaction currency becouse Cr PLA HECess repeatation.Here Credit side is 600 higher than Debit entry.please find the details of Accounting entry of Utilization.
Dr 0000168204 92,667.36 Excise Duty Payable(S&H Education Cess)1%
Dr 0000168200 9,266,733.62 Excise Duty Payable
Dr 0000168205 185,334.71 Excise Duty Payable(Education Cess)
Cr 0000168210 1,300.00 Excise - PLA Depositable
Cr 0000168215 400.00 Excise - PLA Depositable(Education Cess)
Cr 0000168227 300.00 Excise - PLA Depositable(S&H Education Cess 1 %)
Cr 0000168227 300.00 Excise - PLA Depositable(S&H Education Cess 1 %)
Cr 0000168227 300.00 Excise - PLA Depositable(S&H Education Cess 1 %)
Cr 0000120030 9,265,433.62 Service Tax- Plant @ 10%
Cr 0000120035 184,934.71 Service Tax- Plant -Ecess @ 2%
Cr 0000120033 92,367.36 Service Tax- Plant -S&H Ed Cess @ 1%
Please help me.
With Regards,
Manoj SinghHi Manoj,
Check settings in
SPRO - Logistics general - Tax on Goods movements - India - Basic settings - India - Account Determination - Specify Excise Accounts per Excise Transaction
(the duplication could come from here)
and also check for GL assignments in next step
Regds,
Sany -
Error in Billing ''Balance in Transaction Currency''
Hi,
While doing billing ''balance in transaction currency'' error is coming.
Pls give me solution.
Thanks,
PadmajaHi Purva,
Which Tcode have you used - enjoy functionality FB70 or old screens like F-22?
Regards
Dwarak -
CIN- Balance in transaction Currency
Hi
I have created Sales Order - Delivery - PGI - Billing (accounting document generated) & when creating the excise Invoice & when chosing the Utilization (Local) & saving it, the system is throwing an error "Balance in Transaction currency".
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 5,500' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application
Kindly let me know where the settings need to be done for this.
Thanks in advance
Regards
AravindDear Aravind
Please make a search b4 posting any questions as this topic was discussed quite frequently.
Check these threads
[Balance in transaction currency |Balance in transaction currency]
[error in Balance in transaction currency |error in Balance in transaction currency]
[Balance in Transaction Currency |Balance in Transaction Currency]
thanks
G. Lakshmipathi -
TR6C challan updation in J1IH error Balance in transaction currency
HI Experts,
while updating TR6C challan in J1IH iam getting the below error
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 500.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
if i go back from the T code iam getting the below run time error
Runtime Errors SYSTEM_ON_COMMIT_INTERRUPTED
Date and Time 21.02.2012 13:21:41
Short text
The COMMIT WORK processing must not be interrupted.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPMSSYD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
During the COMMIT WORK statement, the following are executed:
- the routines registered with the statement PERFORM .. ON COMMIT,
- the registered methods for the events of the object services
and
- possibly the local update (SET UPDATE TASK LOCAL).
An exception was raised and caught. The normal sequence of the routines
was interrupted by this resulting in the program being continued before
the call of COMMIT WORK. As this can lead to inconsistencies, the
processing cannot be continued in the normal way.
Trigger Location of Runtime Error
rgds
gopalHello Gopal,
For the relevant document, please check the total of Credit equals total of Debit. I guess they are not matching.
Try to match to correct values and this should resolve your issue.
Vikas. -
Balance in Transaction Currency in j1ih T- Code
Hi can any body help me out, when i am creating excise invoice in J1IH i am getting this error mess.
We are creating excise JV through transaction code J1IH as
Modvat account selection is RG23C
If i am posting in same in RG23A the document is post with no error.
ERROR
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 324.45-' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
thanx in advPlease check what the amount in the error represents? Is it the total of excise duty or any specific duty element, it is not able to post that duty element perhaps because of lack of balance in the registers. Please check
Maybe you are looking for
-
LDS songs will not download my updates. I use USA apps store but the download apps message says I need to change from the Norweigan store to USA store. It has updated previously without a problem. How can I change from Norweigan to USA?
-
wien I access Itunes I get the notification....the song could not be located because the origional filoe could not be found...I have over 2000 songs in my library ....Does this mean they are all gone....How can one retrieve them???
-
Is this a bug in FM10 Indexing?
When I produce an index I always get a spurious entry in the index before the A section and it looks like this: Symbols ...................................................47 I have checked the pages in and around p47 and there are no unexplained inde
-
My New iPod nano 6g, just stop working the screen is freezd in the menu? Pleace HELP!!!
-
Tranfer Balnce from Investment Account to Equity Account
Hi Gurus, 1. I have a wrong balance in my Investment Account. I want to transfer it to Equity Account. I post on Entry at Posting Level 10 by Credit Investment Account (Movement Type 125), and Debit Equity Account (Movement Type 139). I get Error in