Balance in transaction currency F5 702 when posting from SD invoice VF04

When posting message from VF04 or VF02, can not release to accounting.
Balance in transaction currency
Message no. F5 702
Diagnosis
A balance has occurred in transaction currency 'USD' with the following details:
Exchange rate '00', amount ' 1,000-' and currency key 'USD'.
The data in the transaction currency were transferred from the calling application.
4.6c release.
Sales org, company code, customer have currency USD.
In the header of invoice, posting status is "Error in Financials Interface". G.L. account is configured and can be posted.
Any suggestions is appreciated.

Hi,
  I am getting same error message problem while releasing billing doc from VF02.
  did you resolve the same please let me know how u did it.. i have gone throu user exit u mentioned but in my project those
  User exits are not using.. pls give reply ASAP..
  Getting below error message..
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'USD' with the following details:
Exchange rate '00', amount '         5,494.00' and currency key 'USD'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.

Similar Messages

  • "Balance in transaction currency" Error in Depreciation Posting Run-AFAB

    Hi,
    We are having unit testing going on during ECC6.0 upgrade.I am getting following error while posting Asset Depreciation -AFAB.
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'AUD' with the following details:
    Exchange rate '00', amount '           467.00-' and currency key 'AUD'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    Please advise what can be the reason of this issue.
    Thanks & Regards,
    Prince Kochhar

    Hi shiv,
    Kindly refer this threads,
    Balance in transaction currency
    Error : Balance in Transaction Currency
    Error F5702 Balance in transaction currency VF01
    Re: Balance in  Transaction Currency
    error in Balance in transaction currency
    Balance in transaction currency
    Thanks,
    Swamy H P

  • Message F5702 - Balance in transaction currency when post MR8M

    Here is my case:
    When reverse invoice through MR8M, SAP prompts an error message - Balance in Transaction Currency. After the research from Google, I found that the root cause maybe come from the SAP standard program and I apply the notes 1283651, but the error still occurs even I change the exchange rate.
    Here are the related information on those documents
    PO Exchg Rate: 7.77 HKD > USD
    PO Date: 24 Dec 2010
    Inv. Exchg Rate: 7.76 HKD > USD
    Inv. Date: 24 Dec 2010
    FI period is open for 12/2010 and 01/2011
    MM current period is 01/2011 and valid for posting on previous period
    Does anyone have idea on it?
    Thanks a lot!!!
    Eric

    I had tried with this figure when execute MIRO
    Reversal Reason: 01/02
    Posting Date: Blank or 24 Dec2010(Document Date of Invoice)
    Exchg Rate on 12/2010 and 01/2011: 7.77
    Exchg Rate on PO is 7.77, MIRO is 7.76, so MIRO contains an entry on GL account for Material Price Variance
    From the OBYC, just KDM contains entry with GL Account 37301001 ( Realised EX Gain/Loss )
    And the other transactions (KDG, KDR, KDV) are without any entries
    Meanwhile, I also check the AR/AP valuation, but with document posting at Dec 2010 on account 37301001
    Thanks,
    Eric
    Edited by: bapechun on Jan 6, 2011 7:13 AM
    Edited by: bapechun on Jan 6, 2011 7:15 AM

  • Balance in transaction currency Message no. F5702 in MIRO

    We are getting following error while posting vendor invoice using MIRO w.r.t local PO.
    Since this is a local PO , currency is INR. Then why this error of exchange rate. How to solve this issue ?
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount '0.01-' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    Pls help

    Hi Sridevi
    When we simulate in MIRO , the accounting shows
    Vendor                                         727,440.00-
    GRIR CLEARING                          727,438.57
    SMALL VALUE DIFFERENCES              1.42
    Here system shows a balance of 1.43 Rs.
    and system gives error message saying "Balance in transaction currency"
    If this was happening in particular invoice, we can put this to a specific GL and close. But this is happening for all invoices.
    Kindly help.
    Thanks in advance.

  • Balance in transaction currency error for AUC settlement

    I was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
    so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
    I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
    Or perhaps am I heading to the right way in identifying the root cause of this issue?
    This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
    Any positive reply is welcomed!
    I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
    [Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
    Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AM

    I was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
    so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
    I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
    Or perhaps am I heading to the right way in identifying the root cause of this issue?
    This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
    Any positive reply is welcomed!
    I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
    [Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
    Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AM

  • While excise posting, an error is coming "Balance in Transaction  Currency"

    Dear all
    While capital excise posting, an error is coming "Balance in Transaction  Currency" for the capital goods posting.
    During the excise duty posting J1IEX our clint done some manuvall entry for excise duties so
    at the time its 0.01 diffrence is coming in balance thats why we are not able to post the document.
    so please can any one give the solution for this
    regards
    pramod

    hi
    Check Excsie duties in "Excise Duty" Tab at Item Details level.
    Kindly note that all the duties (BED, ECS and SECess) in case of RG23C Part II posting must be in EVEN numbers.
    For e.g. Check whether SECess is 10.63 (ODD No) then make it either 11.00 or 10.64 or 10.62 i.e. EVEN No otherwise during Part II posting it will always show balance of 0.01
    Check how much piase is the difference. Then you can decide how many values to be rounded off.
    To avoid this type of problem better to ensure all amounts ( BED, Ecess and Hr Ecess) are in Even figures.
    hope it clears
    regards
    kunal

  • Balance in transaction currency (Accounts Posting error)

    Dear All,
    I got the below mentioned error message while, I am trying to post a invoice to accounts. Can anyone could help me in this context,
    Thanks & Regards,
    Dilip
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount '        13,395.00-' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.

    Dear Dilip Kumar
    Goto SPRO --> Logistics General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Excise Registration.   Select the respective excise registration and go into that by clicking the lens on top.
    Here check whether a tick mark is appearing in "Excise Registration is Liable to AT1".  If not, put a tick mark and then generate invoice.
    thanks
    G. Lakshmipathi

  • BAPI_ACC_INVOICE_RECEIPT_POST error F5 702 Balance in transaction currency

    I’m creating an AP with invoice with taxes but no PO.  I started with working test code / data without taxes and tried to add support for taxes following the example in Note 626235.  I’m coding in C# using the SAP .NET Connector but also tried it via SE37 and received the same error.  Test data from SE37 below:
    DOCUMENTHEADER
    Username     validuser
    Comp_code     3000
    Doc_date     02/14/2008
    Pstng_date     02/14/2008
    Fis_period     00
    Doc_type     KR
    ACCOUNTPAYABLE
    Itemno_acc     1
    Vendor_no     3904
    ACCOUNTGL
    Itemno_acc     2
    Gl_account     470000
    Fis_period     00
    Tax_code     I1
    Taxjurcode     FL1011001     Custom but valid (FB60 tested), returned from BBP_CALCULATE_TAX_FRM_NET_40B
    Costcenter     1000
    ACCOUNTTAX
    Itemno_acc     3
    Tax_code     I1
    Acct_key     NVV
    Taxjurcode     FL0000000
    Cond_key     JP1I
    Stat_con     X
    Taxjurcode_deep     FL1011001
    Taxjurcode_level     1
    Itemno_acc     4
    Tax_code     I1
    Acct_key     NVV
    Taxjurcode     FL1010000
    Cond_key     JP2I
    Stat_con     X
    Taxjurcode_deep     FL1011001
    Taxjurcode_level     2
    CURRENCYAMOUNT
    Itemno_acc     1
    Curr_type     00
    Currency     USD
    Amt_doccur     -107
    Amt_base     -107
    Itemno_acc     2
    Curr_type     00
    Currency     USD
    Amt_doccur     100
    Amt_base     100
    Itemno_acc     3
    Curr_type     00
    Currency     USD
    Amt_doccur     6
    Amt_base     100
    Itemno_acc4
    Curr_type                  00
    Currency     USD
    Amt_doccur     1
    Amt_base     100
    Please note that there are no taxes for level 3 (FL1011001) as the rate is 0.
    Thanks in advance for any help,
    Karl

    Hi Karl,
    Even i am also facing the same error. Please find below my code and do help me out in this problem.
    DOCUMENTHEADER
    Username validuser
    Headertext   XMS:
    Comp_code  0B70
    Fisc_year     2008
    Doc_date     20080612
    Pstng_date  20080708
    Fis_period    07
    Doc_type     KR
    REF_DOC_NO  ERA0002120080612
    ACCOUNTPAYABLE
    Itemno_acc 0000000001
    Vendor_no 0005147036
    REF_KEY_1 20080612
    ITEM_TEXT  XMSA00021
    ACCOUNTGL
    Itemno_acc 0000000002
    Gl_account  0260121000
    comp_code  0B70
    Fis_period 00
    Tax_code    P3
    ALLOC_NMBR  A00021
    ITEM_TEXT    DESK SUPPLIES
    Costcenter 0000104648
    Itemno_acc 0000000003
    Gl_account  0226006010
    comp_code  0B70
    Fis_period 00
    ALLOC_NMBR  A00021
    ITEM_TEXT    SINGAPORE VAT ON DESK SUPPLIES
    Costcenter 0000104648
    ACCOUNTTAX
    Itemno_acc 0000000004
    GL_ACCOUNT  0226006010
    Tax_code          P3
    Acct_key         VST
    Cond_key       MWVS
    Stat_con X
    CURRENCYAMOUNT
    Itemno_acc 0000000001
    Curr_type 00
    Currency_ISO SGD
    Amt_doccur 85.6000-
    Amt_base    80.0000-
    Itemno_acc 0000000002
    Curr_type 00
    Currency_ISO SGD
    Amt_doccur 80.0000
    Amt_base    80.0000
    Itemno_acc 0000000003
    Curr_type 00
    Currency_ISO SGD
    Amt_doccur 5.6000
    Amt_base    0.0000
    Actually the IDOCS were getting generated successfully before adding the tax parameter "ACCOUNTTAX". Since the requirement is to calculate the VAT tax. I Introduced the parameter "ACCOUNTTAX". But now im getting the error "BALANCE IN TRANSACTION CURRENCY".
    Please help me out in this issue.
    Regards,
    Meridius.
    Edited by: Meridius max on Jul 8, 2008 1:01 PM

  • ERROR  IN J1IIN WHEN CREATE EXCISE INVOICE BALANCE IN TRANSACTION CURRENCY

    hi
    I am facing a problem  while creating the excise invoice in j1iin .The message comes occurs " balance in transaction currency" and after enter the another message come " system failure during locking Gl A/C REPL by 210036..
    This problem occurs after separate SECESS..
    PL give me alternative solution on the specific problem..
    Thanks and Regards
    Sachin Hadke
    SD Consultant
    MO.No. 9870734140

    hi
    hemalatha,,
    I have check every thing in cin customization but what the main reason behind that i cant find out. Actually i talk with me basis team he also reply me 1018071 is oldest note no. in 4.6c and currently we are using the 6.0 that its not possible to apply this note in the this series...
    Thanking u for give me valuable suggestion..
    Thanks & Regards
    Sachin Hadke
    SD Consultant
    Mo.No. 9870734140

  • Error in transaction ASKB - Balance in transaction currency

    Hi
    When i am executing transaction ASKB im getting the error:
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'EUR' with the following details:
    Exchange rate '00', amount '     1,953,936.19' and currency key 'EUR'.
    The data in the transaction currency were transferred from the calling application.
    System response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    Can anybody help me in same.
    Thanks and Regards
    Megha

    Hi Chris,
    have you checked the last answer from Raja,?
    Derived depreciation areas could no handle APC differences unless you  activate the indicator "Treat Derived Depreciation Area As Real Area"  under the following menu:                                                                               
    SPRO -> Asset Accounting -> Valuation -> Depreciation Areas -> Define Depreciation Areas).                                                                               
    If you set this indicator, then the system posts the real difference. If  you would like to apply this indicator you have to complete the account  assignment in the configuration, too.                                                                               
    You can switch the derived area from a special reserves area to a  "handled as real" area in transaction OADB. There is no other possibility to get the derived area post APC differences, which you definitely have on some assets.                                                                               
    Please also review and apply the following Notes:     
    759890   Depreciation run ends with error F5 702      
    1094330  F5 702 with retirement on group asset        
    1024598  Incorrect values with repeated simulation 
    Regards Bernhard

  • Error while saving Excise Invoice- 'Balance in transaction currency'

    Hi to all.
          I am using TAXINN taxing procedure.Recently I applied notes for S&H cess legal changes. Everything working fine. But when I try to save excise Invoice system throws the following error. Amount Rs.53 is S&H Cess. If i removed condition type from pricing document is posted.So, can anybody tell me what settings to be made to correct this error?
    Error message:
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount '            53.00' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application

    Dear Siva,
    Please refer Master OSS note# 1032265-- Higher Education Changes.
    May it wil help you to resolve ur problem.
    Regards,
    Venkat

  • Error "Balance in transaction currency" using T.code J1iex

    Hello all,
                When i am capturing an excise invoice using T.code J1iex, the excise invoice is getting captured, but when we are trying to post the vendor using the same T.code j1iex,it is giving an error"Balance in transaction currency". Please help me and try to solve my problem asap.

    Hai,
    1.Flag the check box for rounding duty on procurement in IMG - Logisitics general - Tax on goods & mvts - India - Basic settings - Company code settings.
    2. Manually round off the excise values to next value in J1IEX - Change mode - item level - excise values.

  • CIN- Balance in transaction Currency

    Hi
    I have created Sales Order - Delivery - PGI - Billing (accounting document generated) & when creating the excise Invoice & when chosing the Utilization (Local) & saving it, the system is throwing an error "Balance in Transaction currency". 
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount '            5,500' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application
    Kindly let me know where the settings need to be done for this.
    Thanks in advance
    Regards
    Aravind

    Dear Aravind
    Please make a search b4 posting any questions as this topic was discussed quite frequently.
    Check these threads
    [Balance in transaction currency  |Balance in transaction currency]
    [error in Balance in transaction currency |error in Balance in transaction currency]
    [Balance in Transaction Currency   |Balance in Transaction Currency]
    thanks
    G. Lakshmipathi

  • Balance in transaction currency - IDocs

    Hi experts,
    When processing inbound IDocs, the message below is displayed. Can you explain why this happens and how to fix it?
    Is this an SAP issue for which there is an OSS note?
    In the same processing, I am posting several IDocs with similar information and there is no issue with those. The amounts in the segments within this errored IDoc are balancing, I have confirmed that. The document has currency EUR which is the same as the Company Code currency.
    "Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'EUR' with the following details:
    Exchange rate '00', amount '        29.608,11' and currency key 'EUR'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application."
    Thanks in advance.
    Regards,
    Gonçalo

    Hi Victor,
    I can't recall the solution for this issue, it has been some years ago, even though it is dated Mar 11, 2012 (I don't know why).
    I will close this thread.
    Regards

  • Idoc error- Balance in transaction currency

    Dear Experts,
    In we02, I found idoc error with the following messages:
    Balance in transaction currency
    Message no. F5 702
    Diagnosis
    A balance has occurred in transaction currency 'XXX' with the following details:
    Exchange rate '00', amount ' 1.413.696' and currency key 'XXX'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    Please advice, how to correct this problem.
    Thank you in advance.

    Hi Natasha,
    Please check the "EDID4"  table to find the error why it is not allowing to post.
    Also check "WE09" to check the status of the IDOC.
    You can process it manually through "BD87"
    Bye
    Swapna murali

Maybe you are looking for