Balance in transaction currency - IDocs
Hi experts,
When processing inbound IDocs, the message below is displayed. Can you explain why this happens and how to fix it?
Is this an SAP issue for which there is an OSS note?
In the same processing, I am posting several IDocs with similar information and there is no issue with those. The amounts in the segments within this errored IDoc are balancing, I have confirmed that. The document has currency EUR which is the same as the Company Code currency.
"Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'EUR' with the following details:
Exchange rate '00', amount ' 29.608,11' and currency key 'EUR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application."
Thanks in advance.
Regards,
Gonçalo
Hi Victor,
I can't recall the solution for this issue, it has been some years ago, even though it is dated Mar 11, 2012 (I don't know why).
I will close this thread.
Regards
Similar Messages
-
Idoc error- Balance in transaction currency
Dear Experts,
In we02, I found idoc error with the following messages:
Balance in transaction currency
Message no. F5 702
Diagnosis
A balance has occurred in transaction currency 'XXX' with the following details:
Exchange rate '00', amount ' 1.413.696' and currency key 'XXX'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please advice, how to correct this problem.
Thank you in advance.Hi Natasha,
Please check the "EDID4" table to find the error why it is not allowing to post.
Also check "WE09" to check the status of the IDOC.
You can process it manually through "BD87"
Bye
Swapna murali -
Im creating an AP with invoice with taxes but no PO. I started with working test code / data without taxes and tried to add support for taxes following the example in Note 626235. Im coding in C# using the SAP .NET Connector but also tried it via SE37 and received the same error. Test data from SE37 below:
DOCUMENTHEADER
Username validuser
Comp_code 3000
Doc_date 02/14/2008
Pstng_date 02/14/2008
Fis_period 00
Doc_type KR
ACCOUNTPAYABLE
Itemno_acc 1
Vendor_no 3904
ACCOUNTGL
Itemno_acc 2
Gl_account 470000
Fis_period 00
Tax_code I1
Taxjurcode FL1011001 Custom but valid (FB60 tested), returned from BBP_CALCULATE_TAX_FRM_NET_40B
Costcenter 1000
ACCOUNTTAX
Itemno_acc 3
Tax_code I1
Acct_key NVV
Taxjurcode FL0000000
Cond_key JP1I
Stat_con X
Taxjurcode_deep FL1011001
Taxjurcode_level 1
Itemno_acc 4
Tax_code I1
Acct_key NVV
Taxjurcode FL1010000
Cond_key JP2I
Stat_con X
Taxjurcode_deep FL1011001
Taxjurcode_level 2
CURRENCYAMOUNT
Itemno_acc 1
Curr_type 00
Currency USD
Amt_doccur -107
Amt_base -107
Itemno_acc 2
Curr_type 00
Currency USD
Amt_doccur 100
Amt_base 100
Itemno_acc 3
Curr_type 00
Currency USD
Amt_doccur 6
Amt_base 100
Itemno_acc4
Curr_type 00
Currency USD
Amt_doccur 1
Amt_base 100
Please note that there are no taxes for level 3 (FL1011001) as the rate is 0.
Thanks in advance for any help,
KarlHi Karl,
Even i am also facing the same error. Please find below my code and do help me out in this problem.
DOCUMENTHEADER
Username validuser
Headertext XMS:
Comp_code 0B70
Fisc_year 2008
Doc_date 20080612
Pstng_date 20080708
Fis_period 07
Doc_type KR
REF_DOC_NO ERA0002120080612
ACCOUNTPAYABLE
Itemno_acc 0000000001
Vendor_no 0005147036
REF_KEY_1 20080612
ITEM_TEXT XMSA00021
ACCOUNTGL
Itemno_acc 0000000002
Gl_account 0260121000
comp_code 0B70
Fis_period 00
Tax_code P3
ALLOC_NMBR A00021
ITEM_TEXT DESK SUPPLIES
Costcenter 0000104648
Itemno_acc 0000000003
Gl_account 0226006010
comp_code 0B70
Fis_period 00
ALLOC_NMBR A00021
ITEM_TEXT SINGAPORE VAT ON DESK SUPPLIES
Costcenter 0000104648
ACCOUNTTAX
Itemno_acc 0000000004
GL_ACCOUNT 0226006010
Tax_code P3
Acct_key VST
Cond_key MWVS
Stat_con X
CURRENCYAMOUNT
Itemno_acc 0000000001
Curr_type 00
Currency_ISO SGD
Amt_doccur 85.6000-
Amt_base 80.0000-
Itemno_acc 0000000002
Curr_type 00
Currency_ISO SGD
Amt_doccur 80.0000
Amt_base 80.0000
Itemno_acc 0000000003
Curr_type 00
Currency_ISO SGD
Amt_doccur 5.6000
Amt_base 0.0000
Actually the IDOCS were getting generated successfully before adding the tax parameter "ACCOUNTTAX". Since the requirement is to calculate the VAT tax. I Introduced the parameter "ACCOUNTTAX". But now im getting the error "BALANCE IN TRANSACTION CURRENCY".
Please help me out in this issue.
Regards,
Meridius.
Edited by: Meridius max on Jul 8, 2008 1:01 PM -
Error while saving Excise Invoice- 'Balance in transaction currency'
Hi to all.
I am using TAXINN taxing procedure.Recently I applied notes for S&H cess legal changes. Everything working fine. But when I try to save excise Invoice system throws the following error. Amount Rs.53 is S&H Cess. If i removed condition type from pricing document is posted.So, can anybody tell me what settings to be made to correct this error?
Error message:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 53.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling applicationDear Siva,
Please refer Master OSS note# 1032265-- Higher Education Changes.
May it wil help you to resolve ur problem.
Regards,
Venkat -
Balance in transaction currency
Hi,
I am getting below error while posting MIRO transaction:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'SAR' with the following details:
Exchange rate '00', amount '8,199.40' and currency key 'SAR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Local currency & Transaction Currency: SAR, PO Currency: BHD, I have mainted exchange rates in OB08 SAR-BHD and BHD to SAR.
Please suggest me how to rectify above currency isse!!
Thanks
VS RaoCheck note 709982 or 723009
thanks
G. Lakshmipathi -
Balance in Transaction currency while doing MIGO
While doing MIGO, getting the error '' Balance in Transaction Currency'' and showing the total of Excise and Cess amounts.
Urgent issue. Appreciate if you could respond asap
thanks
Sridevihi
sridevi,
pls verify the raw material inventory account or the GR/IR clearing account, u might have checked only balances in local currency, or it could be in raw material master records, where in u might have selected the foreign currency valuation
cheers
bala reddy -
Error in Balance in transaction currency
Hi Friends,
I am getting the following error while saving the Excise Invoice(Domestic)
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 60.000' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please help me...
With regardsHi,
Please check the following threads which are frequently asked
Balance in transaction currency
Excise Invoice Error In J1IIn
Balance in transaction currency
Also check the following note
Note 763141 - Error: Balance in transaction currency - J1IEX
Regards,
Jigar -
Error in transaction ASKB - Balance in transaction currency
Hi
When i am executing transaction ASKB im getting the error:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'EUR' with the following details:
Exchange rate '00', amount ' 1,953,936.19' and currency key 'EUR'.
The data in the transaction currency were transferred from the calling application.
System response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Can anybody help me in same.
Thanks and Regards
MeghaHi Chris,
have you checked the last answer from Raja,?
Derived depreciation areas could no handle APC differences unless you activate the indicator "Treat Derived Depreciation Area As Real Area" under the following menu:
SPRO -> Asset Accounting -> Valuation -> Depreciation Areas -> Define Depreciation Areas).
If you set this indicator, then the system posts the real difference. If you would like to apply this indicator you have to complete the account assignment in the configuration, too.
You can switch the derived area from a special reserves area to a "handled as real" area in transaction OADB. There is no other possibility to get the derived area post APC differences, which you definitely have on some assets.
Please also review and apply the following Notes:
759890 Depreciation run ends with error F5 702
1094330 F5 702 with retirement on group asset
1024598 Incorrect values with repeated simulation
Regards Bernhard -
Message no. F5702 Balance in transaction currency
Hi,
When I am doing the Asset Settlement, I am getting the below error. Kindly help me out.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 5,850,000.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Kindly help me out with the Solution.
I will assign the points for the solution.
Regards
Kshipra GPlease check the below SAP Notes
[Note 632348 - Settlement to fixed asset in other company code RW022, F5702|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=632348]
[Note 710064 - AIBU settlement to foreign receivers: Error F5702|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=710064] -
Error "Balance in transaction currency" using T.code J1iex
Hello all,
When i am capturing an excise invoice using T.code J1iex, the excise invoice is getting captured, but when we are trying to post the vendor using the same T.code j1iex,it is giving an error"Balance in transaction currency". Please help me and try to solve my problem asap.Hai,
1.Flag the check box for rounding duty on procurement in IMG - Logisitics general - Tax on goods & mvts - India - Basic settings - Company code settings.
2. Manually round off the excise values to next value in J1IEX - Change mode - item level - excise values. -
Balance in transaction currency in MIRO
Hi,
I am doing a MIRO using the PO of the vendor. There is no balance showing up and it is green with 0.00 as the value. The GR amount matches perfectly with the amount entered. There is only one currency being used - USD. Yet, I am getting the error F5702 - Balance in transaction currency. The tax code matches the one on the PO and it is non taxable. I have tried all options - calculate tax or without it but the error just persists. We are on ECC 6.0
Can anyone tell me what else I need to be checking?
Thanks a lot!Hi,
Please check the following threads which are frequently asked
Balance in transaction currency
Excise Invoice Error In J1IIn
Balance in transaction currency
Also check the following note
Note 763141 - Error: Balance in transaction currency - J1IEX
Regards,
Rajesh -
Balance in transaction currency Message no. F5702 in MIRO
We are getting following error while posting vendor invoice using MIRO w.r.t local PO.
Since this is a local PO , currency is INR. Then why this error of exchange rate. How to solve this issue ?
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount '0.01-' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Pls helpHi Sridevi
When we simulate in MIRO , the accounting shows
Vendor 727,440.00-
GRIR CLEARING 727,438.57
SMALL VALUE DIFFERENCES 1.42
Here system shows a balance of 1.43 Rs.
and system gives error message saying "Balance in transaction currency"
If this was happening in particular invoice, we can put this to a specific GL and close. But this is happening for all invoices.
Kindly help.
Thanks in advance. -
Balance in transaction currency, Message no. F5702
We are getting following error while posting vendor invoice using MIRO w.r.t local PO.
Since this is a local PO , currency is INR. Then why this error of exchange rate. How to solve this issue ?
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount '0.01-' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.Hi,
adjust this from j1iex, check for even number and again post it
Kedar -
Balance in transaction currency error for AUC settlement
I was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
Or perhaps am I heading to the right way in identifying the root cause of this issue?
This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
Any positive reply is welcomed!
I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
[Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AMI was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
Or perhaps am I heading to the right way in identifying the root cause of this issue?
This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
Any positive reply is welcomed!
I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
[Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AM -
Hi All,
We are facing error FI/CO interface: Balance in transaction currency from BAPI BAPI_ACC_DOCUMENT_POST.
This error we are getting only in case of passing tax data.
Can anyone help me on this.
Below is the code :
*fill header
gd_documentheader-username = sy-uname.
gd_documentheader-header_txt = 'Test'.
gd_documentheader-comp_code = p_ccode. "SQ
gd_documentheader-doc_date = sy-datum.
gd_documentheader-pstng_date = sy-datum.
gd_documentheader-doc_type = 'KR'.
gd_documentheader-ref_doc_no = p_xblnr. "SQ
*gd_documentheader-bus_act = 'RMWE'.
city = p_city.
state = p_state.
zipcode = p_zip.
*get tax juridisction code
IF NOT ( city IS INITIAL ) AND
NOT ( state IS INITIAL ) AND
NOT ( zipcode IS INITIAL ).
SELECT SINGLE rfcdest INTO ttxd-rfcdest FROM ttxd
WHERE kalsm = 'TAXUSX'.
CLEAR x_com_jur.
REFRESH t_com_jur.
x_com_jur-city = city.
x_com_jur-state = state.
IF zipcode+5(4) EQ space.
zipcode+5(4) = '0000'.
ENDIF.
CONCATENATE zipcode+0(5) '-' zipcode+5(4)
INTO x_com_jur-zipcode.
x_com_jur-country = 'US'.
CALL FUNCTION 'RFC_DETERMINE_JURISDICTION'
DESTINATION ttxd-rfcdest
EXPORTING
location_data = x_com_jur
IMPORTING
location_err = x_com_err
TABLES
location_results = t_com_jur.
IF sy-subrc = 0.
READ TABLE t_com_jur INTO x_com_jur INDEX 1.
it_accountgl-taxjurcode = x_com_jur-txjcd.
ENDIF.
ENDIF.
*fill AP (line 1) - vendor related data
SELECT SINGLE zterm FROM lfb1 INTO p_zterm WHERE lifnr = p_lifnr.
it_accountpayable-itemno_acc = 1.
it_accountpayable-tax_code = p_txcd.
it_accountpayable-pmnttrms = p_zterm. "SQ
it_accountpayable-vendor_no = p_lifnr. "SQ
*it_accountpayable-item_text = 'S2P Testing in UDR1'. - SQ
it_accountpayable-pymt_meth = p_pmet. "- SQ
APPEND it_accountpayable.
*fill GL (line 2)
it_accountgl-itemno_acc = 2.
*item_text - sq
IF p_asset IS NOT INITIAL.
TABLES : anlz,
anla.
SELECT SINGLE * FROM anlz WHERE anln1 = p_asset.
SELECT SINGLE * FROM anla WHERE anln1 = p_asset.
*concatenate '00' anla-KTOGR into it_accountgl-gl_account .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = anla-ktogr
IMPORTING
output = it_accountgl-gl_account.
it_accountgl-asset_no = p_asset.
it_accountgl-sub_number = '0000'.
it_accountgl-cs_trans_t = '105'.
it_accountgl-acct_type = 'A'.
ELSE.
it_accountgl-gl_account = p_gl.
it_accountgl-costcenter = p_cc.
it_accountgl-wbs_element = p_posid.
ENDIF.
it_accountgl-comp_code = p_ccode.
it_accountgl-tax_code = p_txcd. "SQ
it_accountgl-pstng_date = sy-datum.
it_accountgl-fisc_year = sy-datum(4).
APPEND it_accountgl.
CLEAR it_currencyamount.
*fill currency ammounts for lines 1 & 2
it_currencyamount-currency = p_waers. "SQ
it_currencyamount-itemno_acc = 1.
*it_currencyamount-amt_base = -1.
it_currencyamount-amt_doccur = - 116. "p_totamt.
it_currencyamount-CURRENCY_ISO = 'USD'.
it_currencyamount-tax_amt = - 16.
APPEND it_currencyamount.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc = 2.
it_currencyamount-currency = p_waers. "SQ
it_currencyamount-amt_doccur = 100.
it_currencyamount-CURRENCY_ISO = 'USD'.
*it_currencyamount-amt_base = 100.
*it_currencyamount-TAX_AMT = -10.
APPEND it_currencyamount.
*tax data
it_accounttax-itemno_acc = 3.
it_accounttax-tax_code = p_txcd.
it_accounttax-gl_account = '0023110000'.
*it_accounttax-gl_account = p_gl.
it_accounttax-TAXJURCODE = x_com_jur-txjcd.
it_accounttax-acct_key = 'NVV'.
it_accounttax-cond_key = 'XP2I'.
**it_accounttax-direct_tax = 'X'.
APPEND it_accounttax.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc = 3.
it_currencyamount-currency = p_waers. "SQ
it_currencyamount-amt_doccur = 16.
it_currencyamount-CURRENCY_ISO = 'USD'.
it_currencyamount-amt_base = 100.
it_currencyamount-TAX_AMT = - 16 .
APPEND it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader = gd_documentheader
IMPORTING
obj_key = wa_obj_key
TABLES
accountgl = it_accountgl
* ACCOUNTRECEIVABLE =
accountpayable = it_accountpayable
accounttax = it_accounttax
currencyamount = it_currencyamount
* CRITERIA =
* VALUEFIELD =
* EXTENSION1 =
return = it_return
COMMIT WORK.
Regards,
PriyaranjanHi,
Reason 1:
An revenue-recognition-relevant item has several active conditions whose values cancel themselves so that a net item value of 0 results. The conditions have both the same revenue account (SAKN1) and the same clearing account (SAKN2).
For these conditions, the system writes a line with value 0 into the temporary FI/CO interface (internal tables: CACCIT, CACCCR). If table VBREVK does not contain control lines for this line, no further processing occurs and the line remains in the temporary FI/CO interface. Then the system reads this line for the creation of the next billing item which conatins a net value and generates a posting line with value 0. As a result, there is a balance in the FI/CO interface, and the billing document cannot be transferred.
Reason 2:
The billing document contains at least one item with an item category for which there is a setting stipulating that the values of this item should not be transferred to the header total of the document.
That is, in the maintenance of the item categories, this item category has the characteristic 'X' or 'Y' in 'Statistical value' field.
Reason 3:
Case: Billing document contains items without pricing conditions.
Then, on release to accounting, error RW022 occurs.
regards,
Saju.S
Maybe you are looking for
-
Problem installing NW2004s ABAP Trial version on windows xp pro SP3
Good Day. I have drawbacks installing Abap Trial SP12. When it comes to 89% ends abruptly. I set up MS Loopback Adapter. The operating system is Windows XP Professional SP3. 1Gb RAM. Disk Space 50Gb Free. I have installed thousand and once and presen
-
8830 - tethering capability does not work after os upgrade
I upgraded the software on my 8830 world edition from 4.2.2.176 to 4.2.2.196 to increase functionality of business use. The tethering capability that i had with the previous version of software does not work. Installed newest version of VZAccess Ma
-
Solid state drive choices for a T420
Do I have this right? If I want a solid state drive in a T420 my choices are: an mSATA drive in the mPcie slot, a 7mm SSD drive in the ultrabay (and lose the optical drive), or replace the HDD with a 7mm SSD. Anyone know if there is a significant dif
-
CBS activation of webdynpro DC failing
Hi Experts, I have one DC having 5 webdynpro components. I have deleted one component which was not needed. After deleting the component none of my Activities from NWDS getting activated. The build log says about the deleted component window/applicat
-
How to create user using ESSCMD
<p>hi</p><p>i am wondering</p><ul><li>How to add users ESSCMD</li><li>how can i provide users with external authentication</li></ul><p>thanks for your time.</p><p> </p>