Balance in transaction currency in J1IS
I have did migo with 101 mov type and later, client has returned the same material and qty via 122.
In this, I have did J1IS , where i'm getting an error msge "Balance in transaction currency"
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 7,12' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Ranga,
Please check the sales rounding off is activated or not in Company code setting in CIN. If rounding duty procurement and rounding on removal are different while in J1is it gives the error in balance in transaction, because in rounding in procurement it round off the ED. So will removing time it is not rounding off ed it will give error. Try to maintain same setting for both procurement and removing (rounding off) are same as per your company policy on excise rounding.
Then your issue will be resloved.
i have solved by abv solution.. try out and feedback
Similar Messages
-
Balance in transaction currency - during J1IV for retrun delivery
I have did migo with 101 mov type and later, client has returned the same material and qty via 122. I couldn't get part 2 tab in return delivery screen.
In this, I have did J1IS and unable to post thru J1IV , where i'm getting an error msge "Balance in transaction currency"
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 7,12' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Edited by: sapjj jk on Jul 8, 2008 8:52 AMHi,
In Tr.code:OB08, maintian exchange rate with 2 decimals.
regards -
Balance in transaction currency in MIGO
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 7.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
==========
Hi when i do migo with excise tab selection, i'm getting the above error. whn i do w/o excise option, i'm able to post the migo.
pls advise the solution.hi,
Please check the sales rounding off is activated or not in Company code setting in CIN...
If rounding duty procurement and rounding on removal are different while in J1is it gives the error in balance in transaction, because in rounding in procurement it round off the ED...
Pls check....
Hope it helps..
Regards
Priyanka.P -
Error while saving Excise Invoice- 'Balance in transaction currency'
Hi to all.
I am using TAXINN taxing procedure.Recently I applied notes for S&H cess legal changes. Everything working fine. But when I try to save excise Invoice system throws the following error. Amount Rs.53 is S&H Cess. If i removed condition type from pricing document is posted.So, can anybody tell me what settings to be made to correct this error?
Error message:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 53.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling applicationDear Siva,
Please refer Master OSS note# 1032265-- Higher Education Changes.
May it wil help you to resolve ur problem.
Regards,
Venkat -
Balance in transaction currency
Hi,
I am getting below error while posting MIRO transaction:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'SAR' with the following details:
Exchange rate '00', amount '8,199.40' and currency key 'SAR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Local currency & Transaction Currency: SAR, PO Currency: BHD, I have mainted exchange rates in OB08 SAR-BHD and BHD to SAR.
Please suggest me how to rectify above currency isse!!
Thanks
VS RaoCheck note 709982 or 723009
thanks
G. Lakshmipathi -
Balance in Transaction currency while doing MIGO
While doing MIGO, getting the error '' Balance in Transaction Currency'' and showing the total of Excise and Cess amounts.
Urgent issue. Appreciate if you could respond asap
thanks
Sridevihi
sridevi,
pls verify the raw material inventory account or the GR/IR clearing account, u might have checked only balances in local currency, or it could be in raw material master records, where in u might have selected the foreign currency valuation
cheers
bala reddy -
Error in Balance in transaction currency
Hi Friends,
I am getting the following error while saving the Excise Invoice(Domestic)
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 60.000' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please help me...
With regardsHi,
Please check the following threads which are frequently asked
Balance in transaction currency
Excise Invoice Error In J1IIn
Balance in transaction currency
Also check the following note
Note 763141 - Error: Balance in transaction currency - J1IEX
Regards,
Jigar -
Error in transaction ASKB - Balance in transaction currency
Hi
When i am executing transaction ASKB im getting the error:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'EUR' with the following details:
Exchange rate '00', amount ' 1,953,936.19' and currency key 'EUR'.
The data in the transaction currency were transferred from the calling application.
System response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Can anybody help me in same.
Thanks and Regards
MeghaHi Chris,
have you checked the last answer from Raja,?
Derived depreciation areas could no handle APC differences unless you activate the indicator "Treat Derived Depreciation Area As Real Area" under the following menu:
SPRO -> Asset Accounting -> Valuation -> Depreciation Areas -> Define Depreciation Areas).
If you set this indicator, then the system posts the real difference. If you would like to apply this indicator you have to complete the account assignment in the configuration, too.
You can switch the derived area from a special reserves area to a "handled as real" area in transaction OADB. There is no other possibility to get the derived area post APC differences, which you definitely have on some assets.
Please also review and apply the following Notes:
759890 Depreciation run ends with error F5 702
1094330 F5 702 with retirement on group asset
1024598 Incorrect values with repeated simulation
Regards Bernhard -
Message no. F5702 Balance in transaction currency
Hi,
When I am doing the Asset Settlement, I am getting the below error. Kindly help me out.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 5,850,000.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Kindly help me out with the Solution.
I will assign the points for the solution.
Regards
Kshipra GPlease check the below SAP Notes
[Note 632348 - Settlement to fixed asset in other company code RW022, F5702|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=632348]
[Note 710064 - AIBU settlement to foreign receivers: Error F5702|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=710064] -
Error "Balance in transaction currency" using T.code J1iex
Hello all,
When i am capturing an excise invoice using T.code J1iex, the excise invoice is getting captured, but when we are trying to post the vendor using the same T.code j1iex,it is giving an error"Balance in transaction currency". Please help me and try to solve my problem asap.Hai,
1.Flag the check box for rounding duty on procurement in IMG - Logisitics general - Tax on goods & mvts - India - Basic settings - Company code settings.
2. Manually round off the excise values to next value in J1IEX - Change mode - item level - excise values. -
Balance in transaction currency in MIRO
Hi,
I am doing a MIRO using the PO of the vendor. There is no balance showing up and it is green with 0.00 as the value. The GR amount matches perfectly with the amount entered. There is only one currency being used - USD. Yet, I am getting the error F5702 - Balance in transaction currency. The tax code matches the one on the PO and it is non taxable. I have tried all options - calculate tax or without it but the error just persists. We are on ECC 6.0
Can anyone tell me what else I need to be checking?
Thanks a lot!Hi,
Please check the following threads which are frequently asked
Balance in transaction currency
Excise Invoice Error In J1IIn
Balance in transaction currency
Also check the following note
Note 763141 - Error: Balance in transaction currency - J1IEX
Regards,
Rajesh -
Balance in transaction currency Message no. F5702 in MIRO
We are getting following error while posting vendor invoice using MIRO w.r.t local PO.
Since this is a local PO , currency is INR. Then why this error of exchange rate. How to solve this issue ?
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount '0.01-' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Pls helpHi Sridevi
When we simulate in MIRO , the accounting shows
Vendor 727,440.00-
GRIR CLEARING 727,438.57
SMALL VALUE DIFFERENCES 1.42
Here system shows a balance of 1.43 Rs.
and system gives error message saying "Balance in transaction currency"
If this was happening in particular invoice, we can put this to a specific GL and close. But this is happening for all invoices.
Kindly help.
Thanks in advance. -
Balance in transaction currency, Message no. F5702
We are getting following error while posting vendor invoice using MIRO w.r.t local PO.
Since this is a local PO , currency is INR. Then why this error of exchange rate. How to solve this issue ?
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount '0.01-' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.Hi,
adjust this from j1iex, check for even number and again post it
Kedar -
Balance in transaction currency error for AUC settlement
I was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
Or perhaps am I heading to the right way in identifying the root cause of this issue?
This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
Any positive reply is welcomed!
I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
[Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AMI was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
Or perhaps am I heading to the right way in identifying the root cause of this issue?
This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
Any positive reply is welcomed!
I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
[Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AM -
Hi All,
We are facing error FI/CO interface: Balance in transaction currency from BAPI BAPI_ACC_DOCUMENT_POST.
This error we are getting only in case of passing tax data.
Can anyone help me on this.
Below is the code :
*fill header
gd_documentheader-username = sy-uname.
gd_documentheader-header_txt = 'Test'.
gd_documentheader-comp_code = p_ccode. "SQ
gd_documentheader-doc_date = sy-datum.
gd_documentheader-pstng_date = sy-datum.
gd_documentheader-doc_type = 'KR'.
gd_documentheader-ref_doc_no = p_xblnr. "SQ
*gd_documentheader-bus_act = 'RMWE'.
city = p_city.
state = p_state.
zipcode = p_zip.
*get tax juridisction code
IF NOT ( city IS INITIAL ) AND
NOT ( state IS INITIAL ) AND
NOT ( zipcode IS INITIAL ).
SELECT SINGLE rfcdest INTO ttxd-rfcdest FROM ttxd
WHERE kalsm = 'TAXUSX'.
CLEAR x_com_jur.
REFRESH t_com_jur.
x_com_jur-city = city.
x_com_jur-state = state.
IF zipcode+5(4) EQ space.
zipcode+5(4) = '0000'.
ENDIF.
CONCATENATE zipcode+0(5) '-' zipcode+5(4)
INTO x_com_jur-zipcode.
x_com_jur-country = 'US'.
CALL FUNCTION 'RFC_DETERMINE_JURISDICTION'
DESTINATION ttxd-rfcdest
EXPORTING
location_data = x_com_jur
IMPORTING
location_err = x_com_err
TABLES
location_results = t_com_jur.
IF sy-subrc = 0.
READ TABLE t_com_jur INTO x_com_jur INDEX 1.
it_accountgl-taxjurcode = x_com_jur-txjcd.
ENDIF.
ENDIF.
*fill AP (line 1) - vendor related data
SELECT SINGLE zterm FROM lfb1 INTO p_zterm WHERE lifnr = p_lifnr.
it_accountpayable-itemno_acc = 1.
it_accountpayable-tax_code = p_txcd.
it_accountpayable-pmnttrms = p_zterm. "SQ
it_accountpayable-vendor_no = p_lifnr. "SQ
*it_accountpayable-item_text = 'S2P Testing in UDR1'. - SQ
it_accountpayable-pymt_meth = p_pmet. "- SQ
APPEND it_accountpayable.
*fill GL (line 2)
it_accountgl-itemno_acc = 2.
*item_text - sq
IF p_asset IS NOT INITIAL.
TABLES : anlz,
anla.
SELECT SINGLE * FROM anlz WHERE anln1 = p_asset.
SELECT SINGLE * FROM anla WHERE anln1 = p_asset.
*concatenate '00' anla-KTOGR into it_accountgl-gl_account .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = anla-ktogr
IMPORTING
output = it_accountgl-gl_account.
it_accountgl-asset_no = p_asset.
it_accountgl-sub_number = '0000'.
it_accountgl-cs_trans_t = '105'.
it_accountgl-acct_type = 'A'.
ELSE.
it_accountgl-gl_account = p_gl.
it_accountgl-costcenter = p_cc.
it_accountgl-wbs_element = p_posid.
ENDIF.
it_accountgl-comp_code = p_ccode.
it_accountgl-tax_code = p_txcd. "SQ
it_accountgl-pstng_date = sy-datum.
it_accountgl-fisc_year = sy-datum(4).
APPEND it_accountgl.
CLEAR it_currencyamount.
*fill currency ammounts for lines 1 & 2
it_currencyamount-currency = p_waers. "SQ
it_currencyamount-itemno_acc = 1.
*it_currencyamount-amt_base = -1.
it_currencyamount-amt_doccur = - 116. "p_totamt.
it_currencyamount-CURRENCY_ISO = 'USD'.
it_currencyamount-tax_amt = - 16.
APPEND it_currencyamount.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc = 2.
it_currencyamount-currency = p_waers. "SQ
it_currencyamount-amt_doccur = 100.
it_currencyamount-CURRENCY_ISO = 'USD'.
*it_currencyamount-amt_base = 100.
*it_currencyamount-TAX_AMT = -10.
APPEND it_currencyamount.
*tax data
it_accounttax-itemno_acc = 3.
it_accounttax-tax_code = p_txcd.
it_accounttax-gl_account = '0023110000'.
*it_accounttax-gl_account = p_gl.
it_accounttax-TAXJURCODE = x_com_jur-txjcd.
it_accounttax-acct_key = 'NVV'.
it_accounttax-cond_key = 'XP2I'.
**it_accounttax-direct_tax = 'X'.
APPEND it_accounttax.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc = 3.
it_currencyamount-currency = p_waers. "SQ
it_currencyamount-amt_doccur = 16.
it_currencyamount-CURRENCY_ISO = 'USD'.
it_currencyamount-amt_base = 100.
it_currencyamount-TAX_AMT = - 16 .
APPEND it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader = gd_documentheader
IMPORTING
obj_key = wa_obj_key
TABLES
accountgl = it_accountgl
* ACCOUNTRECEIVABLE =
accountpayable = it_accountpayable
accounttax = it_accounttax
currencyamount = it_currencyamount
* CRITERIA =
* VALUEFIELD =
* EXTENSION1 =
return = it_return
COMMIT WORK.
Regards,
PriyaranjanHi,
Reason 1:
An revenue-recognition-relevant item has several active conditions whose values cancel themselves so that a net item value of 0 results. The conditions have both the same revenue account (SAKN1) and the same clearing account (SAKN2).
For these conditions, the system writes a line with value 0 into the temporary FI/CO interface (internal tables: CACCIT, CACCCR). If table VBREVK does not contain control lines for this line, no further processing occurs and the line remains in the temporary FI/CO interface. Then the system reads this line for the creation of the next billing item which conatins a net value and generates a posting line with value 0. As a result, there is a balance in the FI/CO interface, and the billing document cannot be transferred.
Reason 2:
The billing document contains at least one item with an item category for which there is a setting stipulating that the values of this item should not be transferred to the header total of the document.
That is, in the maintenance of the item categories, this item category has the characteristic 'X' or 'Y' in 'Statistical value' field.
Reason 3:
Case: Billing document contains items without pricing conditions.
Then, on release to accounting, error RW022 occurs.
regards,
Saju.S
Maybe you are looking for
-
I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.
-
IPhoto 11 has stopped responding. I had been working on a large slideshow for a week now and all was great when the slideshow froze when I tried to add another image. To shut it down I had to force quit. When I have tried to re-open IPhoto starts to
-
While generating GR follwoing error displays MATERIAL MOVEMENT.GR NOT POSSIBLE Please suggest sloution asap
-
Itunes does not like my anonymization software
Hello, I try to use itunes with anonymization software. I added the proxy to the internet options but itunes complains that it can't establish the connection to the store, I should check my network settings. Without proxy: no problem for itunes, it w
-
Is it possible to temporarily turn off receiving group messaging? If so what will the people sending the message see?